Work-energy theorem Created 2026-09-24 Updated 2026-10-14
For a point mass of constant mass observed in an inertial frame, the net work along its actual path equals its change in kinetic energy:
The middle expression is a line integral; the dot product selects the component of force along the displacement. Positive net work increases speed, negative net work decreases it, and zero net work leaves the endpoint speeds equal. Equal endpoint speeds do not imply equal velocities: a perpendicular force can continually change direction while doing zero work. [ref]
The bridge to Newton's second law is short: take the dot product of with velocity. The chain rule gives , equating the rate of change of kinetic energy to instantaneous power. Integrating gives the theorem. No conservative force assumption entered this argument; friction also contributes to the net work.
For the harmonic oscillator with spring stiffness , release a mass from rest at . The spring exerts . Its work before the first passage through is
Thus gives speed there. The velocity is negative on this passage because the position is decreasing. The energy calculation alone determines its magnitude, so the direction still requires information about the motion.
For a time-independent potential energy , the conservative force contributes work . Separating all other work as gives . Consequently conservation of mechanical energy requires zero net other work; the work-energy theorem itself does not require that conservation. With damping, mechanical energy decreases even though the theorem remains valid. [ref]
Work of a spatially gated myosin head Created 2026-10-25 Updated 2026-11-05
For attached-state elastic energy and a binding window much narrower than , the expected assisting work before is . The detachment tail produces resisting work . Mean force per head is for site spacing . The detachment-time second moment, not the square of its mean, fixes the resisting term. These are idealized prescribed-velocity kinetics, not a complete muscle energy budget.
Worm-like chain force-extension interpolation Created 2026-10-25 Updated 2026-11-05
The interpolation links chain extension to entropic tensile force, with contour length and persistence length . Small extension gives spring constant ; near the force stiffens as . The divergence assumes an inextensible backbone and is not a physical infinite tensile force. A branch fit estimates available contour and flexibility, not an unfolding activation barrier by itself.
Wrench (mechanics) 2026-11-05
A wrench represents a system of loads on a rigid body by its resultant force and resultant torque about a stated reference point. In the moment-first convention, write
The are applied force couples. The six entries package two different physical units: newtons for force and newton-metres for torque. The primary robotics text and its author video use this representation to transform measured forces and moments between reference frames.[ref]
An original example has a force applied at , plus a free couple . Its resultant torque about the origin is . Shift the reference point to without rotating the axes. Then
The physical loading has not changed, but its torque coordinates depend on the reference point. A rotation of axes additionally rotates the vector components.
The dual velocity object is a rigid-body twist, ordered as . Their pairing is mechanical power:
Since , substituting the shifted torque cancels the extra scalar triple product and preserves power. This explains why changing the force-sensor frame must transform torque and force together.
A nonzero resultant force does not always replace the whole wrench by one force alone. Define wrench pitch
Then . A force along the central line through leaves the parallel residual couple . For and , and . The remaining axial couple is . If the resultant force is zero, a nonzero pure couple must instead be retained directly.
A proposed check uses a calibrated force-torque sensor and known lever arms to compare the reported six components at two reference points. Agreement tests the transformation and loading model; it does not establish that two externally equivalent loads produce identical internal stress in a deformable part.
Wrench pitch 2026-11-05
For a wrench with nonzero resultant force and moment about a stated point , its wrench pitch is
It has units of length: torque divided by force. It measures the signed moment remaining parallel to the resultant, per unit force. The force/moment representation and its frame transformations are developed in the primary robotics text’s wrench supplement.[ref]
The wrench pitch does not depend on the moment origin. Moving from to , with displacement expressed in the same axes, gives . Taking the dot product with removes the added term because . A common rotation of both vectors also preserves the ratio. Scaling every applied load by the same nonzero scalar leaves unchanged.
The central axis of a wrench makes the meaning visible. Define
The vector triple-product identity gives
Every point on the line has that same parallel residual moment. This line also minimizes the moment magnitude over all choices of origin: the perpendicular part can be removed, while the invariant parallel part cannot. The minimum is .
For an original example, let and . Then and . Translating the moment origin to that point leaves : a axial force together with a axial force couple. No relocation of a single force can eliminate this remaining couple.
If with , the central-axis moment vanishes and one force on that line reproduces the external load system. If and the moment is nonzero, the load is a pure force couple; the formula for is undefined. An infinite-pitch description is a limiting screw-theory convention, not a finite value supplied by this quotient. Both zero force and zero moment give the zero wrench and no distinguished axis.
A proposed load-sensor check combines a known force on an offset line with a known parallel couple. Recompute moments about several origins and compare the resulting values. Errors in origin translation can corrupt the moment components while the exact invariant remains fixed; near zero resultant force, the division by makes pitch sensitive to measurement error. This geometric load parameter is not automatically a physical screw’s thread spacing.
Yolk syncytial layer Created 2026-10-20 Updated 2026-11-05
An extraembryonic syncytial domain in teleost embryos that generates forces and signalling inputs affecting gastrulation.
Young's modulus Created 2026-10-05 Updated 2026-11-05
Young's modulus is the ratio of axial stress to axial strain in uniaxial linear elasticity. For an isotropic plate, the bending rigidity is , with thickness and Poisson's ratio .
A tensile modulus experiment asks how much a specimen stretches under an axial force, while allowing its sides to contract freely. For initial cross-sectional area and an extensometer spanning initial gauge length , define engineering stress and engineering strain . In the proportional range,
The ratio agrees with this derivative when the line passes through the unloaded origin. A fitted offset should not be mistaken for a material property. Young's modulus has units of pressure: . By contrast, the spring constant of a uniform tensile specimen of length is , with units . Two rods made of the same material can therefore have very different spring constants while sharing Young's modulus.
The normalization removes a useful geometrical ambiguity: doubling doubles the extension at a given force, whereas doubling halves it. For a round specimen ; for a rectangular one , using initial diameter , width and thickness . Diameter error matters twice at first order: . Specify material direction, temperature and loading rate when comparing Young's modulus. Lateral restraint changes the stress state and can prevent this experiment from measuring the uniaxial modulus.
The name commemorates Thomas Young, whose formulation of a measure of elasticity is recorded by the Royal Society. This attribution alone does not establish priority for every modern definition or experimental method.[ref]
Yukawa meson theory of nuclear forces Created 2026-10-18 Updated 2026-10-20
In 1935, Hideki Yukawa proposed a new massive exchange quantum to explain nucleon binding. His paper began with the inadequacy of an electron–neutrino exchange description of the binding strength. It then required a potential energy falling faster with distance than a Coulomb potential, introduced an exponentially decaying field, and related its inverse range to the exchange particle's rest mass. This was a theoretical proposal, not a detection with an apparatus of his own.[ref]
The crucial idea is that a finite rest mass supplies a length scale even in empty space. In a scalar model, the static limit of a Klein-Gordon equation produces the modified Helmholtz equation. Its decaying Green's function gives the Yukawa potential. The derivation below isolates this range mechanism; one-pion exchange also carries spin and isospin structure.
The nuclear emulsion track experiment used developed photographic emulsions exposed to cosmic rays and inspected microscopically. Stopping pions gave daughter muon tracks with closely grouped ranges. Comparing penetrating muons with pion-induced nuclear breakup distinguished their interactions; this was not a direct static force measurement. The muon is a lepton, not Yukawa's strongly interacting meson.[ref]
Zygomatic bone Created 2026-10-31 Updated 2026-11-05
The zygomatic bone forms part of the cheek prominence and lateral orbital boundary. Its connections with neighboring bones help transmit forces through the face. Its external prominence and contribution to the orbit are different aspects of one structural element.