Sydney Chapman (mathematician) Created 2026-10-24 Updated 2026-11-05
Sydney Chapman developed a quantitative explanation of atmospheric ozone photochemistry. In the basic mechanism, ultraviolet radiation dissociates molecular oxygen, an oxygen atom combines with another molecular oxygen and a third collision partner to form ozone, and further reactions remove it. His 1930 treatment connected the production and destruction reaction rates with the distribution and seasonal variation of ozone, while explicitly setting aside uncertain atmospheric transport. It was a testable physical model with stated omissions, rather than a complete account of all observed ozone changes.[ref]
A Theory of Upper-Atmospheric Ozone by Sydney Chapman. Introduction and sections on formation and removal of atmospheric ozone; original-paper excerpt
Portrait of Sydney Chapman (mathematician)
. NOAA. Public domain in the United States (NOAA official work). Source usage terms, via Wikimedia Commons. Source. T10 silsesquioxane cage 2026-10-20
T8 silsesquioxane cage 2026-10-20
Tetrahydrofuran 2026-10-20
Tetrahydrofuran is a cyclic ether solvent. Its oxygen can coordinate lithium ions and alter the aggregation of organolithium reagents.
Tetrahydropyranyl protecting group 2026-10-20
A cyclic acetal protecting group made from an alcohol and dihydropyran. It protects the original alcohol oxygen and can be removed under suitable acidic hydrolysis conditions.
Thien Nhan Lu Created 2026-10-20 Updated 2026-11-05
Enolate alkylation forms a carbon–carbon bond by attack of an enolate carbon on an alkyl electrophile, commonly through an SN2 reaction. Solvent, counterion, aggregation and electrophile identity affect competition with oxygen alkylation.
Thioester 2026-11-05
A thioester contains the linkage , in which sulfur replaces the single-bonded oxygen of an ordinary ester. It is an acyl group joined to a sulfur-containing substituent; it is not the same structural class as a compound with a C=S double bond.
Coenzyme A carries acyl groups through a thioester linkage. Nucleophilic attack at the carbonyl carbon can transfer the acyl group, coupling chemical transformations through an activated carrier. The familiar usefulness of this linkage concerns the free-energy change of the overall transfer or hydrolysis reaction, rather than an isolated “high-energy bond” acting as a store of released energy when simply broken.
Thomas Fox Created 2026-10-20 Updated 2026-11-05
Tetrahydrofuran is a cyclic ether solvent. Its oxygen can coordinate lithium ions and alter the aggregation of organolithium reagents.
Tissue-engineering scaffold 2026-11-05
A tissue-engineering scaffold is a material structure that supplies an initial architecture and local environment for cells in a tissue construct. It can provide attachment surfaces, mechanical support and paths for transport while cells form extracellular matrix. Some designs undergo scaffold degradation; others are intended to persist. A scaffold is therefore part of a developing cell–material system rather than merely a mould shaped like an organ.
Important design variables include material chemistry, biocompatibility, pore geometry, mechanical response and transport. Porosity measures the fraction of volume occupied by voids, but scaffold pore connectivity determines whether those spaces form communicating paths. For example, of solid in a envelope gives porosity . The same porosity could describe connected channels or isolated cavities; the two structures need not admit the same fluid flow or access for cells.
Under an ideal Darcy law model for steady flow through a saturated scaffold slab,where is the intrinsic permeability, the area normal to flow, the thickness and the fluid’s dynamic viscosity. Taking illustrative , , , and gives . Doubling halves the predicted flow at fixed pressure difference. These chosen parameters are a transport example, not a measured scaffold or a biological operating limit.
The Darcy law calculation averages over the pore network. It does not reveal local shear stress, dead-end pores or gradients of oxygen within the construct. A useful experiment therefore combines measurements of geometry and flow with spatial observations of cell viability and matrix formation, instead of inferring all these properties from porosity alone.
The primary report of functional arteries grown in vitro provides a motivating example of evaluating a constructed tissue by both mechanical and biological criteria.[ref]
Functional arteries grown in vitro by L. E. Niklason and others. Primary abstract, cultured vessel function and mechanical measurements
As the cells add matrix and the starting material changes, the mature construct can differ substantially from its initial scaffold. Scaffold design and bioreactor design must consequently be assessed together: geometry affects transport, and the culture conditions affect the tissue that develops. Titanocene methylidene 2026-10-20
The reactive early-metal alkylidene . carbonyl methylenation proceeds through an oxatitanacyclobutane; alkene capture gives a titanacyclobutane. Its oxygen affinity makes ester methylenation feasible.
Triflic anhydride 2026-10-20
Triflic anhydride is , an electrophilic sulfonylating reagent. carbonyl oxygen attack can form an O-triflylated intermediate; adjacent nitrogen donation gives an imidoyl-triflate description.
Trimetaphosphate Created 2026-10-20 Updated 2026-11-05
Trimethylsilyl chloride Created 2026-10-20 Updated 2026-11-05
Trimethylsilyl chloride is . Reaction of an oxygen nucleophile at silicon can replace chloride and form a trimethylsilyl ether.
Trapping an enolate on oxygen forms a silyl enol ether. This preserves an enol-derived carbon-carbon double bond while changing the species' charge and handling properties.
Trimethylsilyl triflate Created 2026-10-20 Updated 2026-11-05
Trimethylsilyl triflate has connectivity . It transfers a trimethylsilyl group to suitable nucleophilic sites, commonly oxygen.
The weakly coordinating triflate group makes silicon highly electrophilic relative to many less reactive silyl reagents. Silylation can protect an alcohol or change the reactivity of a carbonyl-containing intermediate.
[ref]
https://www.tcichemicals.com/JP/en/product/tci-topics/TCIPracticalExample_20250324. TCI original example, 24 March 2025: alpha-tetralone converted to a silyl enol ether
Tumour angiogenesis 2026-11-05
Tumour angiogenesis is the growth of new blood vessels from pre-existing vessels in response to a tumour and its surrounding tissue. It supplies a route for oxygen and nutrients to reach growing cells. Vessel formation and effective perfusion are distinct: a vascular image alone does not measure the delivery of oxygen to every part of a tumour.
A foundational experiment by Judah Folkman, Ezio Merler, Charles Abernathy and Gretchen Williams tested tumour-derived material in a rat dorsal air sac assay. A membrane wick delivered separated material locally; after 48 hours the investigators inspected the vascular response with a stereoscope and took tissue sections. A wick without the active preparation provided a negative control. The response was graded from 0 to 5+, rather than measured as an absolute endothelial cell count.[ref]
Isolation of a Tumor Factor Responsible for Angiogenesis by Judah Folkman and others. 1971, printed p.279, Biological Assay of TAF and Reading the Air Sac Assay; Figures2–4
This connected an isolated preparation to a reproducible biological effect. It did not identify a unique modern molecule or establish that inhibiting one signal would cure all cancers.An original diffusion model explains why access to vessels matters. Approximate a vessel-free tumour as a sphere of radius with uniform oxygen consumption per unit volume per unit time. Let be a constant diffusion coefficient and fix the surface oxygen concentration at . At steady state, the diffusion equation with consumption and spherical symmetry becomesFiniteness at the centre removes the singular integration term. Integrating again and imposing givesIf a stipulated threshold is required to avoid hypoxia, the model predictsFor illustration, take , and . The limiting radius is approximately , or . These are chosen model inputs, not measurements from the historical study or a universal size limit. Quadrupling consumption halves the limiting radius. A predicted negative concentration indicates failure of the assumed uniformly consuming viable sphere, not physically negative oxygen.
The calculation isolates a transport constraint; it does not model vessel branching, changing consumption or delivery by flowing blood. Signals such as vascular endothelial growth factor can influence endothelial cells, but their action and the resulting perfusion require biological measurements beyond this spherical model.
Tungstate 2026-11-05
Tungstate commonly denotes the tungsten oxoanion and salts containing it. The formula specifies one tungsten and four oxygen atoms with a net charge of . The Protein Data Bank chemical-component dictionary identifies its WO4 ligand as tungstate(VI), while the corresponding PubChem record gives the dianion formula.[ref]
Tungstate WO4 in the Protein Data Bank Chemical Component Dictionary. WO4 chemical-component summary; PubChem CID24465
Taking each oxygen to have oxidation state , charge balance gives , hence for tungsten. Oxidation state and net ionic charge therefore answer different questions. A neutral salt needs two singly charged cations per tungstate anion, or one doubly charged cation. That count balances charge without requiring the ions to form a discrete isolated molecule in a crystal.
Tungstate also provides an experimental structural probe. In a 1995 study of Escherichia coli fumarase C, a competitive tungstate derivative helped locate an active site containing contributions from three protein subunits.[ref]
The multisubunit active site of fumarase C from Escherichia coli by T. M. Weaver and others. Abstract, tungstate derivative and multisubunit active-site assignment
Binding a detectable inorganic ion can reveal where a molecular interaction occurs. It does not by itself show that the ion is the enzyme's physiological substrate or that every binding site catalyzes a reaction. U6 metal rescue experiment 2026-11-05
The U6 metal rescue experiment tests whether chemical groups in U6 small nuclear RNA position metal ions needed for RNA splicing. Its central perturbation is a phosphorothioate substitution: replace a selected non-bridging phosphate oxygen by sulfur. Changing the metal then tests whether altered ligand–metal compatibility can explain the resulting defect. This is a chemical interaction test within the assembled spliceosome.
In the 2013 yeast study, researchers introduced individual sulfur substitutions at twenty U6 positions. They activated and affinity-purified spliceosomes, then assayed their chemical reactions without ATP and soluble factors. This separated the assay from ATP-dependent activation and competing proofreading. Five tested substitutions strongly impaired branch formation in magnesium; cadmium supported rescue of branching. Exon-ligation rescue differed between substitutions, so rescue was not an interchangeable property of every altered phosphate.[ref]
RNA catalyses nuclear pre-mRNA splicing by Sebastian M. Fica and others. pp.229–230, Figure2 and Extended Data Figure1: substitutions, purified activated complexes, branching and exon-ligation comparisons.
An original way to quantify the control logic is a ratio of ratios. Let and be measured activities for oxygen- and sulfur-containing RNA in metal A, with analogous values for metal B. Definewhen all denominators are positive. If switching metals multiplies every activity by the same amount, then . Invented values , , , give : B preferentially relieves the sulfur-associated defect. This is an interaction metric, not a measured value from the paper or a direct metal-binding constant.
A preferential rescue still needs controls for folding, assembly and which reaction is being measured. The experiment's strength is connecting a particular RNA chemical group to catalytic output through a compensating perturbation. Omitting ATP after activation does not show that the complete cellular splicing process requires no ATP.
Umbilical artery Created 2026-10-31 Updated 2026-11-05
Umbilical vein Created 2026-10-31 Updated 2026-11-05
Valence electron Created 2026-10-13 Updated 2026-10-31
A valence electron belongs to the electronic arrangement used to describe a chemical atom's chemical bonds and ordinary chemical reactions. For the neutral hydrogen, carbon, nitrogen, and oxygen chemical atoms used here, the valence electrons occupy the outermost occupied electron shell. Their respective electron configurations are , , , and , giving one, four, five, and six valence electrons. See Chemistry 2e, 6.4: electron configurations and valence electrons.
Lewis structures show these valence electrons while omitting the inner electrons. Consequently, eight drawn valence electrons in water do not mean eight total electrons: neutral water has ten, with two inner oxygen electrons omitted. Neutral Ammonia likewise has ten total electrons but eight valence electrons; neutral carbon dioxide has twenty-two total electrons but sixteen valence electrons.
This distinction makes the small counts useful: connections and possible lone pairs can be organized without representing every electron or solving the entire many-electron wavefunction. The outermost-electron shell shortcut applies to the examples above, rather than serving as a universal definition for all chemical elements; the electronic arrangement relevant to chemical bonds can also involve other electron subshells.
