The nervous system regulates visceral movement, glandular secretion, blood flow and coordinated bodily responses, while also influencing nutrition indirectly through those functions. Organic or vegetative life here means activities maintaining the body, such as blood circulation, digestion, pulmonary ventilation, secretion and excretion. It does not designate an independent form of living substance.
One influence is directly motor. Autonomic nerves alter the rate and force of the heart, contract or relax smooth muscle in the intestine, urinary bladder, airways and blood vessels, and coordinate movement with the opening and closure of sphincters. Their effect need not be excitatory: an active vagus nerve can slow the heart, while other pathways accelerate it. In the modern account, sympathetic and parasympathetic effects depend on the target and its receptors; they are not respectively universal accelerator and brake systems. Some organs receive both divisions, while others do not have a simple balanced double supply.[ref]
A second influence is secretomotor. Activity in appropriate nerves can increase salivary secretion, alter gastric acid secretion and promote sweating. This is distinguishable from moving a duct or changing its calibre. A convincing experiment collects a secretion from a cannulated duct while a nerve is stimulated, rather than inferring secretion from a change of colour or organ size. For example, stimulation of the chorda tympani can evoke fluid from the submandibular gland. The response depends on functioning secretory biological cells; the nerve communicates a command rather than supplying the material constituents of saliva.
A third influence is vasomotor. Changing the calibre of arterioles changes local vascular resistance and perfusion. The classic comparison of an ear before and after interruption of its cervical sympathetic supply illustrates loss of vasoconstrictor tone: the vessels dilate and the ear becomes warmer because more warm blood reaches it. Stimulation of the peripheral cut pathway can produce the converse vascular effect. Warmth therefore need not mean that the local nerves themselves generate more heat. Vascular control also changes the delivery of oxygen and nutrients to a gland or tissue, so it can modify function indirectly.
These outputs are organized by sensory feedback and reflexes. Distension of the intestine can evoke coordinated movement; changes in blood pressure or blood-gas composition influence heart rate and breathing. Local circuits in the enteric nervous system permit some digestive activity without an intact connection to the brain, while longer reflexes involve the spinal cord or brainstem. Central states also matter: the sight or expectation of food can initiate preparatory digestive responses, and fear can alter heart rate, sweating and visceral movement.[ref]
Somatic motor activity also supports vegetative functions. Breathing uses the respiratory diaphragm and other skeletal muscles; swallowing and continence use coordinated skeletal muscle as well as smooth muscle. Thus organic function cannot be identified solely with the anatomical distribution of the sympathetic nervous system.
The historical idea of a direct trophic influence requires discrimination. A denervation region may change through loss of movement, altered perfusion, loss of protective sensation or changed secretion. Those observations alone do not establish a special nutritive fluid flowing down the nerve. Modern biology recognizes molecular signalling between nerves and their targets, as well as neuroendocrine signalling pathways: the hypothalamus can influence hormone release, and sympathetic input can evoke adrenal medulla secretion. These are mechanisms added to, rather than evidence for an undefined historical nutritive force. A useful experimental design measures the motor, vascular and secretory consequences separately before assigning a residual effect to direct trophic action.
The historical name fermentation covered several transformations of organic matter: alcoholic, lactic, butyric and acetous changes, as well as some processes now classified separately. In modern biochemistry, fermentation more narrowly means energy-yielding metabolism that regenerates oxidized cofactors without requiring an external respiratory electron acceptor. The older use of the word should not be forced into that modern definition.
In alcoholic fermentation, suitable yeast converts a fermentable sugar into ethanol and carbon dioxide. For glucose, the principal net balance is
A vessel with an outlet for the evolved gas and a separate receiver illustrates the change: test the carbon dioxide with limewater and identify the volatile alcohol in a separated distillate. Gas evolution alone does not prove that the liquid contains ethanol. Actual yeast cultures also make biomass and minor products; the chemical equation describes the principal conversion. In modern terms, glycolysis supplies ATP, and the reduction leading to ethanol regenerates NAD+ from NADH.
In lactic acid fermentation, an ideal homolactic balance is
The souring of suitable carbohydrate-containing materials, including milk, supplied a familiar historical example. Hydrolysis of lactose supplies monosaccharides, while acid production lowers the pH and can precipitate casein. Casein coagulation is a consequence of the changed conditions, not evidence that the protein has itself been converted into lactic acid. Some organisms instead make additional products, so not every lactic fermentation obeys only this homolactic balance.
In butyric acid fermentation, carbohydrates or lactate can give butyric acid, carbon dioxide and molecular hydrogen. An idealized balance from lactic acid is
It contrasts with the simple homolactic balance because both gaseous products and a different organic acid appear. Mixed cultures and alternative pathways can alter the product distribution; odour is neither a sufficiently specific nor a necessary laboratory test.
Acetous fermentation denotes the conversion of ethanol into acetic acid, as in vinegar production:
It depends on oxygen and is now understood as an aerobic microbial oxidation, rather than a fermentation in the narrow biochemical sense. This explains why access to air matters differently here than in the main alcohol-producing stage.
Other older extensions of the word include saccharification or diastatic changes, such as the hydrolysis of starch into smaller sugars by malt enzymes, and sugar inversion, in which sucrose takes up water to form glucose and fructose:
The two hexose products have the same elemental formula but different structures. Such hydrolyses prepare substrates for later metabolism; they do not by themselves constitute the alcohol-producing conversion. Viscous fermentation or mucilaginous fermentation described transformations yielding gum-like material and sometimes mannitol; it is an operational historical category without one universal balanced chemical equation. Putrefactive fermentation referred to the decomposition of nitrogen-containing organic matter, including proteolysis and subsequent reactions producing Ammonia, amines and sometimes hydrogen sulfide. It likewise has no single formula covering every mixed substrate and product.
The unifying historical interest is that small amounts of a “ferment” bring about major changes in a large amount of organic substrate. Modern explanation distinguishes organisms, enzymes and metabolic pathways. The later demonstration of fermentation in cell-free yeast juice showed that alcoholic conversion need not require intact living yeast cells in the reacting liquid; that result belongs to 1897, not to knowledge to demand of an 1866 candidate.[ref]
Chemical elements are the constituents from which ordinary chemical compounds are built; many familiar materials are mixtures of those chemical compounds and sometimes free chemical elements. In the historical operational definition, a chemical element could not be resolved into simpler substances by chemical means. In the modern definition, its chemical atoms all have the same atomic number. Ordinary chemical reactions rearrange those chemical atoms rather than creating a new chemical element.
Air is a mixture, chiefly of nitrogen and oxygen, whose components can be separated or selectively consumed. For example, burning phosphorus in a suitable enclosed sample removes most of the oxygen and leaves chiefly nitrogen; the residual gas has different properties from the original air. Air also contains carbon dioxide, variable water vapour and smaller amounts of other gases. Its variable composition is incompatible with treating it as one elementary substance.
Water is a chemical compound: electrolysis produces molecular hydrogen and molecular oxygen, approximately in the volume ratio at the same temperature and pressure. Their recombination produces water again:
Thus water has fixed composition but is chemically decomposable, whereas air has no fixed single chemical formula. Neither belongs with the chemical elements merely because it is common and widespread on the Earth's surface.
Oxygen can be obtained by decomposing an oxygen-rich chemical compound, or by separating it from air. For the historical laboratory, heating potassium chlorate, heating certain metal oxides, and electrolysis of water are useful examples. The substance collected is molecular oxygen, .
A common preparation heats potassium chlorate, often with manganese dioxide as a catalyst:
A heat-resistant vessel and delivery tube conduct the evolved gas to an inverted collecting vessel over water, after the initial displaced air has been excluded. Oxygen is only slightly soluble in water, making this collection principle useful. The manganese dioxide changes the reaction rate and required heating conditions; it is not the net source of the oxygen in this catalysed balance. Without the catalyst, potassium perchlorate can occur as an intermediate.
Two older preparations use heated metal oxides:
The first explains the historical decomposition of mercury(II) oxide, with metallic Mercury deposited on cooler parts of the apparatus. It is historical chemistry, not a preferred present-day teaching preparation. The second is one stage in the reduction of manganese dioxide; at still higher temperature further oxygen loss can give , so the oxide residue depends on the conditions. Strong heating of potassium nitrate provides another net balance:
In electrolysis, suitable separated electrodes collect oxygen at the anode and hydrogen at the cathode. With a suitable electrolyte and electrodes, the net chemical equation is
The gases must be kept in separate collecting spaces if the experiment is to demonstrate their separate identities and the approximately volume ratio. Choice of electrolyte matters: a chloride-containing electrolyte can give chlorine instead of clean oxygen evolution.
For a modern small-scale comparison, catalytic decomposition of hydrogen peroxide gives
This is a different feedstock from potassium chlorate. Large-scale separation of oxygen from air by cryogenic fractionation belongs to later industrial practice and should not be substituted for an 1866 laboratory answer. A collected sample can be tested by its vigorous support of combustion, conventionally the relighting of a glowing splint; this observation identifies a property, while the preparation and exclusion of interfering gases establish the sample's provenance.
Potassium iodide is prepared by converting iodine into iodide, then obtaining a pure crystalline potassium salt. One chemical route uses potassium hydroxide; an alternative first forms iron(II) iodide. The account here describes the chemical operations and their balances, without assigning a later pharmacopoeial formula to 1866.
In the alkaline route, iodine reacts with hot potassium hydroxide to give a mixture of potassium iodide and potassium iodate:
This is disproportionation: iodine goes from oxidation state to both and . Merely evaporating the solution would leave the unwanted iodate with the iodide. Heating the dried salts with charcoal reduces the iodate to iodide. A limiting balance with carbon monoxide as the carbon oxide product is
The carbon oxides can depend on the reaction conditions; the indispensable chemical point is removal of the iodate's oxygen without losing its iodine. Extraction with water, filtration of insoluble residue, concentration and crystallization then recover potassium iodide. A modern USDA technical evaluation explicitly describes this same reaction sequence; it is corroboration of the chemistry, not evidence that its modern document was the 1866 official recipe.[ref]
In the alternative iron route,
followed by
The insoluble iron-containing material is separated and the potassium iodide recovered from the liquid. Oxidation of the ferrous precipitate during working can alter its final form, so the displayed chemical equation is the ideal metathesis balance rather than a guarantee that every collected particle remains pure iron(II) carbonate.
Pure potassium iodide is a colourless or white crystalline ionic solid, commonly in cubic crystals, readily soluble in water and less soluble in ethanol. It has no intrinsic brown iodine colour. Its aqueous solution contains potassium ions and iodide ions. Free iodine dissolves in the presence of iodide through triiodide formation,
With silver nitrate, iodide gives yellow silver iodide, sparingly soluble in water and resistant to ordinary aqueous Ammonia:
A little chlorine liberates iodine, which gives the characteristic colour with starch:
By contrast, iodate contamination can liberate iodine simply on acidification in the presence of iodide:
That distinction explains why removal of the iodate is part of preparing a well-defined product, rather than an optional cosmetic step. These are chemical properties and recognition principles, not advice to administer the salt.
Prepare carbon dioxide, make measured mixtures with air, and test a standardized lighted taper in fresh mixtures to find an extinction boundary. In this taper extinction experiment, “carbonic acid gas” means gaseous carbon dioxide, not liquid carbonic acid. The proportion should be reported as a fraction of the final mixture, with the conditions of the test.
A documented sufficient mixture is available from a later first-hand experiment: one volume of carbon dioxide with two volumes of air extinguished the introduced taper in the apparatus used. Thus
This is a conditional literature result, not an invented observation from the Oxford examination. In The True Position of Oxygen as a Restorative in Carbonic Acid Poisoning by W. Ernest Thomson, Experiment XLVIII directly compares one-third carbon dioxide mixed with two-thirds oxygen and with two-thirds air; the latter extinguished the taper. The experiment was published in 1894, so it supplies a later physical comparison rather than evidence of what the 1866 candidate measured.[ref]
The question asks for an approximately sufficient proportion; it does not explicitly require a universal minimum. The cited condition supplies one sufficient point. To find approximately the least sufficient proportion for the proposed apparatus, determine the lower boundary by the following procedure instead of treating one-third as that boundary.
Prepare the carbon dioxide in a small gas-generating flask by adding dilute hydrochloric acid to calcium carbonate:
Fit a delivery tube, keep the outlet unobstructed, and discard the first gas while the original air is being displaced from the apparatus. A wash bottle and droplet trap can reduce acid carry-over before collection in a freely moving gas syringe or suitable gas holder. This acid-carbonate preparation is also used in a current Royal Society of Chemistry demonstration.[ref] A separate sample may be checked with limewater:
The turbidity is a qualitative check for carbon dioxide; it is not a measurement of the fraction in the flame-testing mixture. Avoid using a water-filled collecting vessel for the quantitative mixing stage without allowing for dissolved carbon dioxide and water vapour.
For the mixing stage, use two calibrated gas syringes and a closed mixing vessel with a means of transferring the mixture into a larger flame-testing jar. Measure the component gas volumes at the same temperature and pressure. Mix the gases thoroughly before the flame test. If the gases behave approximately as an ideal gas mixture, their measured volume fractions then approximate their mole fractions. For example, an intended one-third mixture can be prepared from one measured portion of carbon dioxide and twice that volume of air. These are preparation instructions, not recorded trial outcomes.
Keep the taper's material, exposed wick, initial candle flame, insertion depth, gas volume and test duration fixed. Give the flame a reproducible exposure, using a gas-filled jar and a narrow insertion opening with a loose collar to limit entry of fresh air. The observation period must be specified before testing; a fixed five-second exposure is one possible chosen protocol, not a reported condition of the historical reference experiment. Use a large mixture volume relative to the small taper, introduce it briefly, and use a fresh mixture for every trial; prolonged burning changes the mixture by consuming oxygen and producing carbon dioxide and water vapour. Do not seal a burning vessel into an improvised pressure-tight apparatus.
Start with an air control that sustains the taper. Test successively richer, separately prepared carbon dioxide mixtures until extinction occurs within the specified observation period. Retest with a less rich mixture and subdivide the interval. Repeat mixtures near the boundary to detect inconsistent results. A completed experiment would report, for example, the greatest tested fraction at which burning consistently persists and the smallest tested fraction that consistently extinguishes the taper. If the responses are ordered and reproducible under the fixed protocol, report
A midpoint and half-interval may describe the resolution of that bracket; they are not a statistical confidence interval. No numerical values of or are supplied by the source, and none are asserted here.
For a useful model check, let denote the initial oxygen fraction in air, and let denote the fraction of added pure carbon dioxide in the final mixture. Before the taper changes the gas, an ideal, uniformly mixed replacement model gives
Taking dry air to have is an explicit model input. For the documented one-third mixture, this gives , or about oxygen. It is a calculation from an assumed starting composition, not a measured oxygen analysis or a general extinction rule. Also distinguish a fraction of the final mixture from an addition relative to the original air: the volume ratio satisfies , so a 1:2 addition ratio means , not .
Carbon dioxide affects the thermal balance of a diffusion flame as well as the oxidizer fraction. Extinction therefore depends on the taper, mixing, gas flow, temperature, pressure and heat loss; an oxygen-dilution calculation alone cannot predict its value. The official account of carbon dioxide suppression describes its predominantly thermophysical action.[ref]
Finally, distinguish this experiment from covering a burning candle and waiting for it to go out. That procedure simultaneously changes gas composition, temperature and spatial distribution. A modern experimental study using gas and temperature sensors found different conditions at different heights and extinction before all oxygen was consumed.[ref] A pouring demonstration with unmixed carbon dioxide likewise does not determine a uniform bulk fraction. A sufficient, condition-labelled literature mixture and a reproducible bracketing procedure answer the available task; an actual examination threshold or a universal minimum is not claimed.
The defensible core of William Odling's statement is a transfer of energy: sunlight helps build reduced food material, and its subsequent oxidation can supply animal heat and work. Here solar force means solar energy, and eremacausis means slow oxidation, rather than a special vital agent. The historical wording, from his 1866 lectures, must be qualified where it identifies the fuel with the substance of the working muscle or contrasts plant and animal metabolism too absolutely.[ref]
In oxygenic photosynthesis, light absorbed by chlorophyll supports conversion of carbon dioxide and water into reduced organic material, with release of oxygen. An overall account, written for one glucose unit, is
This summarizes several stages, rather than describing a single elementary chemical reaction. The evolved oxygen comes from water. The product can furnish starch, other carbohydrates and precursors for fat and protein; the latter additionally requires a source of nitrogen. A human obtains these materials directly from plants or through animals that have eaten plants. Thus a grain meal and the flesh of a grain-fed animal can trace much of their chemical energy to the same original sunlight.[ref]
The reverse overall balance for complete aerobic utilization of glucose is
Similarly a representative fatty acid, palmitic acid, has the complete oxidation balance
Both equations conserve each chemical element. The relevant energy difference belongs to the complete set of reactants and products, including oxygen; merely breaking a bond does not supply net energy. In modern terms, controlled cellular respiration couples part of the available chemical free energy to ATP formation. ATP hydrolysis can then support muscle contraction, active transport and biosynthesis; some energy is transferred to heat. The process occurs through enzyme-mediated steps, without a flame, although complete combustion in a calorimeter can help measure the corresponding chemical energy change.
Glands and muscles continually replace constituents, and their proteins can be degraded. Amino acids can contribute carbon skeletons to energy metabolism, while their nitrogen is disposed of largely as urea. But ordinary muscle contraction does not require proportional destruction and rebuilding of the contractile protein at every stroke. Carbohydrates and fats are major fuels for muscle, and a gland can use those fuels to support secretion. The historical picture of burning the organ's own substance is therefore an inadequate general explanation.[ref]
This correction was already an experimental issue before the exam. Edward Frankland's 1866 discussion compared the mechanical work of climbing with the energy that could be assigned to protein destruction estimated from urinary nitrogen. The latter was insufficient to account for all the work. His combustion measurements also distinguished the heat from burning a sample completely from the smaller amount available when nitrogenous material leaves the animal as still-combustible urea. Measuring external work, urinary products and calorific values gives the hypothesis a quantitative test; it is more informative than simply pointing out that an active animal gets warm.[ref]
Finally, plants themselves carry out cellular respiration, and not every ecosystem obtains its input from sunlight: chemolithotrophy is an alternative. The plant-animal contrast is useful for following energy through an ordinary food chain, but it is not an exhaustive division of biochemical capabilities. Conservation of energy also requires the bookkeeping form
for an idealized interval in which is the metabolizable food input, with energy lost in excreta already subtracted and other material-energy exchanges neglected. Here is external work, is net outward heat transfer, and includes changes in stored chemical and other energy. The living body transforms energy; it does not create it.
The conventional nineteenth-century answer is diamond, graphite and so-called amorphous carbon. These exhibit strikingly different physical properties while sharing the same chemical element, carbon.
Diamond is a crystalline, usually transparent form, very hard and ordinarily an electrical insulator. Its three-dimensional covalent bond network joins each carbon chemical atom to four neighbours. Graphite is a dark, soft, crystalline form with layered bonding; easy shear between layers makes it useful for marking and lubrication. Its electronic structure permits much greater electrical conductivity than that of ordinary diamond.
The historical “amorphous” class includes charcoal, coke, lampblack and soot, as well as carbon-rich materials such as gas-retort carbon. Such names describe preparation and texture as well as structure: restricted-air heating of wood gives charcoal, destructive distillation of coal gives coke, and incomplete combustion of a carbon-bearing fuel produces soot. Modern structural examination shows that these materials can contain small, imperfect graphitic regions. They are not necessarily one distinct pure allotrope. Coal itself is a chemically complex, impure carbon-rich material, rather than a pure form of the chemical element.
A common chemical connection is that pure samples of these carbon forms can yield carbon dioxide upon complete combustion in excess oxygen:
Their different hardness, appearance and electrical conductivity arise from structure and impurities, rather than from being different chemical elements. This is the explanatory role of allotropy.
Modern lists also include fullerenes, carbon nanotubes and graphene. These are useful present-day extensions, not discoveries to credit to the 1867 candidate.[ref]
A combustible substance can sustain a sufficiently rapid, heat-producing chemical reaction with a suitable oxidizing agent. In ordinary air this usually means combination with molecular oxygen, producing enough heat to maintain the reaction after ignition. A visible flame is not essential: carbon can glow as it undergoes combustion.
Combustibility depends on the surroundings and experimental conditions. A cold block of wax does not ignite merely because it meets air: heating must first provide combustible vapour and overcome the kinetic barrier to reaction. Finely divided iron burns much more readily than a massive bar because more surface is exposed per unit mass. Nor is oxygen universally required: molecular hydrogen can undergo combustion in chlorine. The expression “supports combustion” identifies the surrounding reactant in a particular experiment; it does not establish an absolute division between two kinds of chemical substance.
The wick supplies liquid wax by capillary action; wax vapour reacts with atmospheric oxygen, releasing the heat that keeps the supply going. The wick is a delivery system, rather than the principal fuel.
First, an external flame warms the wick and adjacent wax. Melting produces a small liquid reservoir, and capillary action draws it into the spaces between the wick fibres. Near the hot tip, evaporation and some pyrolysis supply gaseous fuel. Melting and evaporation are physical changes; pyrolysis and combustion change the chemical substances present. Once established, the candle flame transfers enough heat back to the wax to maintain this sequence.[ref]
The candle flame is a diffusion flame. Its relatively dark inner region contains newly supplied fuel with limited access to oxygen. In the yellow luminous region, incomplete conversion of the hydrocarbons produces small soot particles, which become incandescent. Farther out, mixing supplies enough oxygen to consume most of the remaining fuel, carbon monoxide and soot. Thus the yellow light is largely thermal emission from hot particles, rather than a yellow gas.[ref]
For a representative alkane component of paraffin wax, complete combustion has the chemical equation
Real candle materials are mixtures, and some, such as fatty materials, already contain oxygen; the displayed chemical equation is an illustrative wax model. The principal products of complete combustion are carbon dioxide and water vapour. Convection carries the hot gases upward and brings fresh air into the flame. A cold collector can reveal condensed water; collecting the gases and passing them into limewater gives a calcium carbonate cloudiness from carbon dioxide.
Removing the oxygen supply, cooling the reaction zone, or cutting off wax delivery extinguishes the flame. The smoking wick immediately afterwards can still emit combustible vapour; without sufficient heat at the mixing zone, that vapour need not sustain a flame.
Bleaching powder is made by passing chlorine over slaked lime, exposing a large surface of the powder to the gas. The contemporary name “chlorinated lime” is more informative than treating it as pure calcium chloride. The 1867 British Pharmacopoeia (1867) describes this manufacture and a dull-white, partly water-soluble powder with bleaching and disinfecting properties.[ref]
An idealized overall chemical equation is
The chlorine undergoes disproportionation: one part becomes chloride, with oxidation state , and another becomes hypochlorite, with oxidation state . Commercial bleaching powder contains residual calcium hydroxide, water and chlorine-bearing solid phases; the chemical equation is a useful composition balance, not a claim that the powder is one pure molecular substance or simply a fully characterized mechanical mixture. The old formula is an abbreviated representation, not the formula of pure calcium hypochlorite, .
Its chief properties follow from the hypochlorite chemistry. The aqueous extract is alkaline and oxidizing. The chemical equilibrium
produces hypochlorous acid on lowering the pH. Oxidation of coloured organic compounds can destroy the chromophores responsible for their colour. This is irreversible chemical alteration of a dye, rather than merely washing it away. The historical description that bleaching works through “nascent oxygen” is not a necessary modern mechanism: hypochlorous acid and related reactive chlorine species themselves react with substrates.
With sufficient hydrochloric acid, the hypochlorite and chloride can generate chlorine:
This explains acid-induced gas evolution and why acidification is not an innocuous way to use a bleaching material. Exposure, moisture and heating can reduce the stored oxidizing strength. Its useful strength is measured as available chlorine, rather than inferred from the powder's total mass or its smell; inert material and residual lime do not provide the same bleaching capacity.
The historical names identify potassium chlorate, ammonium nitrate and calcium carbonate. Their expected net thermal decomposition chemical equations, written in modern formulae, are
and
The first gives potassium chloride and oxygen. A potassium perchlorate intermediate can occur during uncatalysed heating; the first chemical equation gives the final overall balance. The second represents the familiar nitrous oxide pathway, with hot water initially as vapour. It does not mean that ammonium nitrate has only one decomposition pathway: conditions, impurities and confinement can produce different gases and violent decomposition.[ref]
The third is calcination of limestone to quicklime. Its extent depends on temperature and the partial pressure of carbon dioxide; removing carbon dioxide favours further decomposition. Reversing the process gives carbonation of calcium oxide.
For dissolution in hydrochloric acid, the corresponding balances are
and
“Magnesia” here means magnesium oxide, and “alumina” means aluminium oxide. Zinc undergoes an oxidation-reduction reaction, reducing hydrogen ions to molecular hydrogen. The oxides instead undergo acid-base reactions: hydrogen ions convert oxide into water, without hydrogen evolution. The chlorides are dissolved species in water, rather than anhydrous molecular salts necessarily existing intact in the solution. Strongly ignited aluminium oxide may dissolve slowly; the balance does not determine the rate.
Atomic theory explains fixed composition by fixed numbers of chemical atoms, and multiple proportions by different small whole-number combinations of the same chemical atoms. The two laws are empirical regularities which the theory explains; they are not themselves direct observations of individual chemical atoms.
For the law of definite proportions, suppose a pure chemical compound has composition . If the atomic masses are and , every formula unit contains masses and . Enlarging the sample multiplies both by the same number, so
The mass ratio is therefore independent of sample size or preparation route, provided the same pure stoichiometric chemical compound is obtained. Ordinary water supplies an example: its hydrogen-to-oxygen mass ratio is approximately .
For the law of multiple proportions, compare and . At a fixed mass of A, the masses of B are in the ratio
This is a ratio of integers, and is often a ratio of small integers for simple chemical compounds. With carbon monoxide and carbon dioxide, about mass units of carbon combine with about and of oxygen: the oxygen masses are in the ratio . The chemical formulas explain why adding a second oxygen chemical atom doubles the oxygen contribution without changing the carbon contribution.
The laws alone do not uniquely determine the correct chemical formulas or the atomic weights; independent information is needed to distinguish, for example, one formula unit from a multiple of it. Modern qualifications include variations in isotopic composition and non-stoichiometric compounds. These refine the simple nineteenth-century formulation without removing its usefulness for pure compounds of fixed composition.
Distinguish diseases caused by inhaled air pollutants from infections transmitted through air. The principal impurity groups are gases and vapours, suspended particles and biological material; detection must identify the particular group and, where possible, measure its concentration.
The nineteenth-century phrase “impure air” mixed several different mechanisms. Irritant smoke and dust can damage the respiratory system; toxic gases can poison without causing an infection; crowded, poorly ventilated rooms can increase exposure to infectious material. The historical miasma theory treated foul emanations much more broadly as generators of disease. In particular, the smell of sewage does not itself establish the cause of typhoid fever, cholera or malaria.
For the first part, important real consequences include the following:
For the second part, ordinary outdoor air already contains nitrogen, oxygen, a small amount of carbon dioxide, and variable water vapour. Their presence alone is not evidence of pollution. In a smoky industrial town, soot, mineral dust, products of fuel combustion and sulfur dioxide would be particularly relevant. In occupied rooms, expired carbon dioxide, water vapour and suspended biological material increase unless removed. Decomposing wastes may contribute Ammonia, hydrogen sulfide and other volatile products. The actual mixture depends on sources, ventilation and weather.
For the third part, begin with a defined sampling site and time, record occupancy or industrial activity, and compare with a suitable reference. A volume of air, not simply an unrecorded sniff or a discoloured paper, is the basis of quantitative comparison. Methods available by 1867 include:
The chemical equations underlying two of these qualitative tests are
Here the precipitates are barium carbonate and lead sulfide. For the baryta absorption method, in an ideal, fully captured sample with no interfering acid gases, the difference between blank and sample acid requirements satisfies
where is the amount concentration of titratable acid equivalents and the volumes refer to titration of the entire corresponding absorbent portions; any aliquot requires its scale factor. The factor two follows from the two acid equivalents neutralized per mole of barium hydroxide. This calculation assumes that the barium carbonate precipitate is excluded from the residual-base determination; dissolving it again with the titrant would invalidate the inference.
Odour, visible smoke and room stuffiness are useful prompts to investigate, but no single smell, carbon dioxide value, microscopic field or chemical colour test establishes that air is free of harmful impurities. Specify which material was measured and which uncertainty remains.
The chief physiological routes are abrupt failure of blood circulation, failure of pulmonary ventilation or gas exchange, or catastrophic failure of the central control of those functions. Historical clinical accounts used labels such as syncope, asphyxia and medical coma in explaining deaths; these terms describe broad physiological failures rather than identifying the underlying diseases.[ref] A brief faint or ordinary medical coma is not itself necessarily fatal.
In primary circulatory failure, effective delivery of blood to the brain stops. Modern examples include ventricular fibrillation, pulseless ventricular tachycardia, severe bradyarrhythmia and asystole. They may arise in coronary artery disease, after myocardial infarction, in cardiomyopathy, or from inherited cardiac ion channel disorders. An electrical cause may leave little distinctive gross evidence at autopsy. These modern mechanisms refine the broad historical description of cardiac syncope.[ref]
Mechanical interruption of blood circulation gives another group: massive haemorrhage, rupture of an aortic aneurysm, cardiac tamponade, and large pulmonary embolism. The immediate deficit differs in each. Haemorrhage removes circulating volume; cardiac tamponade prevents adequate filling; pulmonary embolism obstructs flow through the pulmonary circulation. All can end with critically low cardiac output even if some electrical activity persists.[ref]
Respiratory failure includes obstruction of the airway by a foreign body, laryngeal oedema or aspiration; drowning; and depression of breathing by drugs or major brainstem injury. Oxygen delivery then fails and secondary cardiac arrest follows. Carbon monoxide poisoning and cyanide poisoning illustrate related failure of oxygen transport or use: not every hypoxic death is caused by physical obstruction of an airway.[ref][ref][ref]
A major intracranial haemorrhage or rapidly developing brain herniation can destroy or compress the pathways maintaining consciousness and breathing. A severe disturbance of electrolytes, especially potassium, may instead act directly on the heart's electrical function. A fatal seizure can involve respiratory and circulatory mechanisms; sudden unexpected death in epilepsy remains a diagnosis requiring exclusion of other causes, not merely recognition of a history of epilepsy.[ref]
The practical distinction is between mode, immediate mechanism and underlying cause. For example, rupture of an aneurysm can cause haemorrhage, then circulatory failure, then irreversible hypoxic-ischaemic brain injury. A complete explanation identifies that chain. Inspection, histology, examination of the airway and heart, and appropriately interpreted toxicology may establish it; an unexplained sudden death cannot be assigned a precise cause from its suddenness alone.
Oxygen-plasma ashing, preferably a remote or downstream arrangement when low damage matters, removes organic photoresist chemically. Feed oxygen through a plasma source energized by radiofrequency or microwave power. Electron-impact dissociation generates reactive oxygen species; neutral radicals reach the wafer in a separate downstream region. Keep the wafer off a strongly biased driven electrode so energetic ion bombardment is much smaller than in directional reactive-ion etching. A barrel asher with shielded wafers is another chemical-stripping implementation.
These equations represent radical production and an ideal complete-oxidation balance; actual exhaust can also contain CO and fragments. Pumping removes volatile products. Directional shape fidelity is unnecessary for blanket stripping, while access around surface relief and high chemical removal selectivity are useful. Monitor endpoint and wafer temperature, and verify removal with a witness surface. oxygen can oxidize exposed materials, charging can still damage sensitive structures, and inorganic or metal-containing residues may require a compatible separate clean. Ashing removes organic contamination; it is not a universal residue-removal step.[ref]
Approximate the reaction enthalpy and entropy as constant over the measured interval, so . A linear least squares fit of all three free energies against temperature gives
and hence
The negative entropy change is reasonable because oxygen gas is incorporated into solids. The fit residuals are , so the data support this approximate straight-line description. Extrapolating its intercept to zero temperature is a way of estimating a constant local enthalpy, not evidence that the heat capacities vanish or that the same phases persist to zero temperature. More temperatures and repeated heating/cooling measurements would test curvature and equilibration.
The solid electrolyte conducts oxide ions. Equilibrating oxygen at the two interfaces couples one molecule to four electrons. Taking the positive measured electromotive force as the air-reference potential relative to the Ni/NiO side, the Nernst equation is
Assume air at one bar with , pure solid phases of unit thermodynamic activity, and . For the reaction normalized to one mole of oxygen,
The negative sign is physically consistent with a strongly reducing Ni/NiO equilibrium relative to air. Using the supplied and gives
The tabulated free energies are per mole of , not per mole of NiO. Values normalized to one mole of NiO would be half as large. A reliable oxygen concentration cell measurement requires reversible interfaces, calibrated uniform temperature, a known reference oxygen pressure and predominantly ionic rather than electronic conduction through yttria-stabilized zirconia. Air is not pure oxygen: dropping the term changes the inferred entropy.
Gas formation is decided by each interfacial electrode potential and reaction kinetics, rather than by comparing the terminal cell voltage directly with 1.23 V. On the conditional model above, the cathode potential is V versus the standard hydrogen electrode. At unit proton activity and unit hydrogen pressure this is above the hydrogen equilibrium potential, so hydrogen evolution is not favored there. The anode is at V, below the unit-activity oxygen equilibrium potential of 1.23 V, so oxygen evolution is likewise not favored at the intended point. Neither gas is expected in that model, despite a terminal voltage near 2 V; 1.2 V is lost in the electrolyte.
Without the missing cathodic kinetic information, the exact cathode potential is not fixed, so the hydrogen conclusion is conditional. Locally depleted copper ions, increased current, electrode blocking or strong passivation can move an interface into gas evolution. Actual proton/oxygen/hydrogen activities shift equilibrium through the Nernst equation, and gas nucleation and activation barriers further affect observable bubbles. A reference electrode at each interface and direct gas observation distinguish these effects from an increased solution-resistance drop.
Deposit a dilute dispersion onto a clean, electron-transparent TEM support and let the ethanol evaporate. A practical sequence is to redisperse gently, dilute enough to reduce overlap, place a small drop on a holey or lacey support grid, wick away excess liquid and dry thoroughly. Choose support chemistry compatible with wetting by ethanol.
Look for flakes spanning support holes, where no support film obscures the light-element lattice. Adjacent supported regions help locate and stabilize the flakes. Dilution reduces accidental multilayer stacks, while a clean grid and clean solvent reduce hydrocarbon background. Gentle agitation may be useful; prolonged aggressive sonication can itself change the defects one intends to measure.
Drying prevents a volatile liquid from entering the microscope vacuum. Additional cleaning must be chosen cautiously because heating or energetic plasma treatment can alter oxygen groups and defects in reduced graphene oxide. Record a low-dose survey before atomic-resolution imaging, and distinguish pre-existing defects from changes induced during acquisition.