Past exam of the physics B course of the University of Cambridge / 2019 / Paper 2 / Section B / B6

In a homogeneous linear medium, write $\mathbf{D}=ϵ\mathbf{E}$ and $\mathbf{B}=\mu \mathbf{H}$. Without free charge or current, Maxwell's equations becomeTaking the curl of Faraday's law, using $\nabla \times (\nabla \times \mathbf{E})=\nabla (\nabla \cdot \mathbf{E})-{\nabla }^2\mathbf{E}$, givesTheir plane-wave solutions have ${\omega }^2=k^2/(\mu ϵ)$ and speed $v=1/\sqrt{\mu ϵ}$; in vacuum this is $c=1/\sqrt{{\mu }_0{ϵ}_0}$. For a wave $\mathrm{Re}[{\mathbf{E}}_0{e}^{i(\mathbf{k}\cdot \mathbf{r}-\omega t)}]$, the divergence equations give $\mathbf{k}\cdot {\mathbf{E}}_0=\mathbf{k}\cdot {\mathbf{B}}_0=0$, while Faraday's law gives ${\mathbf{B}}_0=\mathbf{k}\times {\mathbf{E}}_0/\omega$. Thus the fields and propagation direction form an orthogonal triad, with $B_0=E_0/v$.

The two independent transverse electric components allow linear, circular and elliptical polarization of an electromagnetic wave. Their relative amplitudes and phase determine the polarization state. In a lossless nondispersive medium the energy density and energy flux areA travelling plane wave has equal electric and magnetic energy contributions and time-averaged intensity $⟨S⟩=E_0^2/(2Z)$, where $Z=\sqrt{\mu /ϵ}$ is its wave impedance and $E_0$ denotes peak electric-field amplitude. Reflection and refraction follow by imposing the electromagnetic boundary conditions. Frequency-dependent constitutive response introduces dispersion; conductivity introduces attenuation, so the simple real constant-speed result has a specified domain of validity.

A dielectric responds to an electric field mainly by displacing or orienting bound charges, rather than by sustaining a steady conduction current. The polarization density $\mathbf{P}$ is electric dipole moment per unit volume. It creates bound chargeSeparating these charges from free charge motivatesFor an isotropic linear dielectric, $\mathbf{P}={ϵ}_0{\chi }_e\mathbf{E}$, soThe electric susceptibility ${\chi }_e$ describes material polarization and is not the magnetic susceptibility. More generally it is a tensor and can depend on frequency, field strength and temperature.

Electronic polarization displaces an Electron cloud relative to its nucleus; ionic polarization displaces positive and negative ions; orientational polarization partially aligns permanent molecular dipoles against thermal disorder. For independent permanent moments of magnitude $p$, weak-field orientational response gives ${\chi }_e\simeq n{p}^2/(3{ϵ}_0{k}_{B}T)$ when local-field corrections and interactions are negligible. This explains a common inverse-temperature contribution without asserting that every dielectric follows that law.

At a static interface, $\mathbf{n}\cdot ({\mathbf{D}}_2-{\mathbf{D}}_1)={\sigma }_f$ and the tangential electric field is continuous. Bound surface charge is already included through $\mathbf{P}$. For a homogeneous filled capacitor, $C=ϵA/d$, and a reversible linear dielectric stores energy density $u=\mathbf{E}\cdot \mathbf{D}/2$. At fixed voltage, insertion raises the stored field energy but the voltage source also supplies energy; force arguments must include that source. At fixed charge the capacitor energy instead decreases on insertion.

At frequencies too high for a polarization mechanism to follow the field, its contribution weakens. A complex permittivity represents dissipative dielectric loss as well as phase lag; the sign of its imaginary part depends on the time convention. Strong fields can cause nonlinear response or dielectric breakdown, beyond the reversible linear model.

In a homogeneous Ohmic conductor, $\mathbf{J}=\sigma \mathbf{E}$. Combining this with Maxwell's equations givesFor a good conductor, $\sigma \gg \omega ϵ$, so conduction dominates displacement current. With time dependence $e^{-i\omega t}$ and depth $z>0$, take $E\propto e^{ikz}$. ThenThe field is consequently proportional to $e^{-z/\delta }{e}^{iz/\delta }$: it both attenuates and changes phase with depth. The skin depth is the distance for amplitude to fall by $e^{-1}$; power density falls as $e^{-2z/\delta }$, so its attenuation length is $\delta /2$.

Physically, changing fields induce currents whose magnetic field opposes penetration. Equivalently, after neglecting displacement current, magnetic diffusion obeys ${\partial }_t\mathbf{B}=(\mu \sigma {)}^{-1}{\nabla }^2\mathbf{B}$. Faster changes have less time to diffuse into the metal. Increasing frequency, conductivity or magnetic permeability reduces $\delta$, provided the relevant material parameters remain applicable.

For a thick conductor the tangential surface electrical impedance is $Z_s=(1-i)/(\sigma \delta )$ with the stated time convention and consistent field orientation. Its real part $1/(\sigma \delta )$ represents dissipative resistance per square. Current crowding near the surface raises the AC resistance of a wire when $\delta$ is small compared with its radius; thin strands and laminated magnetic cores reduce suitable eddy-current losses. When $\sigma /\gg \omega ϵ$, the full complex propagation constant must replace the good-conductor approximation. In a magnetic metal the magnetic permeability can itself be nonlinear and frequency dependent.

A transmission line must be treated as a distributed circuit when its propagation time is significant on the signal timescale. Let $R^{\prime },L^{\prime },G^{\prime },C^{\prime }$ denote resistance, inductance, leakage conductance and capacitance per unit length. Applying Kirchhoff's voltage law and Kirchhoff's current law to a short length $dx$ gives the telegrapher's equationsFor a lossless line, $R^{\prime }=G^{\prime }=0$. Differentiating again gives wave equations withThe travelling solutions can be written $V=V_{+}(t-x/v)+V_{-}(t+x/v)$ and $I=[V_{+}(t-x/v)-V_{-}(t+x/v)]/Z_0$. The minus sign for the backward wave is essential to power transport.

At a load $Z_L$, continuity of voltage and current gives the voltage reflection coefficientA matched termination $Z_L=Z_0$ absorbs the incident signal without reflection. An open circuit has ${\Gamma }_L=+1$ and a short circuit has ${\Gamma }_L=-1$. Superposed incident and reflected waves produce standing waves. A sinusoidal lossless line of length $\ell$ transforms the termination intofor the $e^{i\omega t}$ convention. At a quarter wavelength, $Z_{\mathrm{in}}=Z_0^2/Z_L$, allowing impedance transformation. A coaxial line supports a transverse electromagnetic mode whose ideal $L^{\prime },C^{\prime }$ are calculated in A4. Its energy travels in the fields between conductors; the characteristic impedance is not the wire's DC resistance. Losses introduce attenuation and make the characteristic impedance and propagation constant complex.