Define the dimensionless right-hand side of part (d) by . Then . Because and for , its sign is the sign of . The original plot is positive for sufficiently long wavelengths and negative at short wavelengths; the nonzero crossing is approximately . Numerically solving the displayed equation gives .
For , . Write with . The time factor then contains an exponentially growing solution. For , and the ideal inviscid modes oscillate stably, without damping. At the crossing the frequency is zero and the mode is marginal. In terms of the axial wavelength ,
The growth rate tends to zero as , so the very longest wavelengths are not the fastest growing. The source plot has its maximum near , corresponding to and . Thus a characteristic fragmentation spacing is several cylinder diameters; a quantitative nonlinear fragment mass is beyond this linear stability calculation.
For unstable modes the physical displacement must be interpreted as with complex amplitudes handled consistently throughout. The paper's real-part notation is harmless for the squared dispersion relation, but it should not be read as imposing real in a gravitational instability calculation. The exactly uniform mode is excluded from the finite- derivation; the limit of the curve alone does not establish a separate volume-preserving uniform-radius mode.
Figure 1.
Rates computed from the cylinder dispersion relation as a function of wavelength, showing stable oscillation and unstable growth
. Details.
The vanishing total pressure must be imposed at the displaced free surface, not at fixed . The first-order Taylor expansion is
Since and , the Lagrangian pressure perturbation condition is
The supplied gravitational perturbation and the combined potential, evaluated at , then give
Here is the Modified Bessel function of the second kind. Equating mode amplitudes and using part (c) yields
Rearrange to obtain the dispersion relation for the axisymmetric gravitational instability of an incompressible cylinder:
Every quantity on the right is dimensionless, consistent with having units . The stabilizing term comes from displacing the background hydrostatic pressure profile; omitting the Lagrangian pressure perturbation would lose it.
Use complex amplitudes and take their real parts at the end. Write the radial surface displacement as and the combined potential as
The linear kinematic boundary condition is . Differentiate it once more in time and use the radial momentum equation, , evaluated at the unperturbed radius :
With , the mode amplitudes therefore satisfy
The prime differentiates the Modified Bessel function of the first kind with respect to its dimensionless argument, rather than with respect to . The result has units , as required because is a potential. It applies to ; the uniform limit requires separate treatment.
Write total pressure and gravitational potential as
Here is the Eulerian perturbation of a fluid variable applied to pressure, while is the corresponding gravitational potential perturbation. They have units and , respectively. The constant interior mass density is .
The Euler equations are
Subtract the hydrostatic equilibrium relation and discard terms quadratic in the perturbation. Mass conservation gives incompressible flow, and the gravitational Poisson equation has no bulk density perturbation. Thus, strictly inside the fluid,
The last equation is Laplace equation, not a statement that self-gravity has disappeared. The displaced surface carries a first-order surface mass density , where is its radial displacement, and this supplies the source and matching conditions for at the moving interface. The axisymmetric gravitational potential of a displaced cylindrical interface, expressed using modified Bessel functions, incorporates that boundary source.
It is useful to define . Taking the divergence of the momentum equation gives . For an axisymmetric Fourier mode with axial wavenumber , regularity at selects radial dependence , the Modified Bessel function of the first kind, since is singular there. In what follows can always be chosen nonnegative.
Treat the cylinder as infinitely long, with a vacuum exterior and no surface tension. Let be its gravitational potential. Integrating the gravitational Poisson equation over a coaxial cylinder of radius and length , then applying the divergence theorem, gives
Thus the inward gravitational acceleration is . Hydrostatic equilibrium requires
Impose zero pressure on the free surface, , and integrate inward:
This is the hydrostatic self-gravitating incompressible cylinder. Its central pressure is , and the units of the expression are . A nonzero external pressure would add that constant to .
Let . Differentiating the logarithm gives
For definiteness order . Then dominates as , while dominates as . The limiting states are
Without this ordering convention, and . Thus the states correspond to after matching each label to its dominant exponential; the propagation speed does not depend on the naming of the two states.
Their exponent difference is
Consequently, the Viscous Burgers travelling shock moves at
Set and . Factoring out the mean exponential gives the hyperbolic tangent profile
A precise measure of the width must be stated. The natural length in the hyperbolic tangent argument is
Thus the layer has thickness of order . A different common convention, jump divided by maximum gradient, gives ; the far-tail exponential e-folding length is . These differ only by their stated definitions, rather than by different solutions.
Two distinct limits require . The source permits arbitrary real constants, but in the degenerate case the solution is uniform, , and there is no shock wave or finite shock width.
Figure 1.
Calculated travelling shock profile and its tangent width; the horizontal coordinate moves with the shock
. Details.
For and positive , set , so the Cole-Hopf transformation is . Substitution into the viscous Burgers equation gives
Hence the most general equation implied by this substitution is
The time normalization in the Cole-Hopf transformation accounts for the arbitrary function : multiplying by a nonzero function of time leaves and therefore unchanged. Replacing by sets . With this conventional normalization,
the heat equation.
For each , the function obeys . By the superposition principle for this linear partial differential equation,
is a solution, positive for all real . Here has units so both exponents are dimensionless. The positivity ensures that its logarithm and the resulting velocity are regular.
The pressure-free equation has the scalar conservation law form
A smooth travelling ansatz obeys , so it cannot continuously connect two distinct constant states. The inviscid shock wave must be interpreted as a discontinuous weak solution. Its Rankine-Hugoniot condition is
For ,
The result is independent of which state is called upstream. For a physical compressive entropy shock of the Inviscid Burgers equation, the left and right states satisfy and therefore : characteristic curves run into the shock wave from both sides. The ordering instead produces a rarefaction wave.
The Rankine-Hugoniot conditions follow by integrating conservation laws across a thin moving layer, then letting its macroscopic thickness tend to zero. For example, normal momentum conservation in one dimension has the conservative form
For a shock wave moving at speed , integrate over a control interval whose endpoints move with the discontinuity. The Reynolds transport theorem gives
where denotes the difference of limiting states. Mass conservation similarly gives . If is the normal velocity in the shock frame, combining the two relations yields
The same construction applied to conservation of energy, for a non-radiating normal shock wave with nonzero mass flux, gives , where is the specific enthalpy. An equation of state closes these relations, and the physical compression branch has increasing entropy.
Finite dynamic viscosity replaces the ideal discontinuity by a thin smooth transition. A viscous stress contributes a derivative to the momentum flux inside the layer and converts directed kinetic energy into internal energy. If its gradients vanish in the uniform far states, the same limiting Rankine-Hugoniot conditions still hold there. Balancing nonlinear transport with viscous diffusion gives a thickness of order in the viscous Burgers equation, where is the kinematic viscosity.
For , write and choose either signed branch , with . These two branches cover the roots of the squared dispersion relation. The group velocity of an internal gravity wave is
If instead the positive-frequency root is chosen for both signs of , set and multiply the displayed components by , away from the cusp .
Taking the dot product with the wave vector gives
Thus the group velocity, which describes the travel of a narrow wave packet and its energy, is perpendicular to the wave vector, and hence perpendicular to the phase velocity . This is the internal-wave phase and group velocity geometry. It also follows from phase-group orthogonality for degree-zero dispersion: the frequency depends only on the direction of , not its magnitude. For , the group velocity is zero, consistent with the stationary extremum .
Use plane wave perturbations proportional to , with amplitudes . The linear equations become
To eliminate pressure without dividing by , multiply the vertical momentum equation by and subtract times the horizontal momentum equation:
Use incompressible flow and the equation for mass density to obtain . Hence, for a nontrivial internal gravity wave,
For stable density stratification, and is the buoyancy frequency. Then and the normal modes oscillate rather than grow. For , a mode with has and grows exponentially: denser fluid lies above lighter fluid. Uniform density, , is marginal for this restoring mechanism.
The case , , has zero frequency in the displayed relation. Incompressible flow then requires , so it is a degenerate non-propagating case rather than a finite-frequency vertical oscillation. These equations concern the incompressible model of part (b); its does not contain the adiabatic compression correction needed in part (a).
Write the background mass density as and its hydrostatic pressure as , where
Apply an Eulerian perturbation of a fluid variable to the background fields:
Thus is the Eulerian pressure perturbation, in pascals; it is not the background hydrostatic pressure.
For incompressible flow, mass conservation becomes . Linearizing about rest gives
The Euler equations are . The background pressure gradient and weight cancel. Dropping products of perturbations gives
Under , replace by in inertia but retain the background mass density gradient in the displacement-induced buoyancy. This is the Boussinesq approximation. Its linear Boussinesq equations here are
The absolute value makes explicit that the small-density-variation condition concerns magnitude, including the usual negative of stable density stratification.
The buoyancy frequency, also called the Brunt–Väisälä frequency, is the angular frequency of a small vertical displacement restored by buoyancy in a stably stratified fluid. Take upward, gravitational acceleration , and a background in hydrostatic equilibrium,
Displace a small gas element upward by , sufficiently slowly for its pressure to match its surroundings but without heat exchange. For this adiabatic process, is constant along the element's motion, so its mass density changes by . The surrounding mass density changes by . The element's excess mass density is consequently
Its acceleration is . Thus
For a gas of fixed composition obeying the ideal gas law, . The adiabatic buoyancy frequency of an ideal gas is therefore
where is the specific heat capacity at constant pressure, and is the specific gas constant. Here has units ; is an angular frequency, not a cyclic frequency. Positive gives simple harmonic motion, negative gives convective instability, and is marginal. The temperature form assumes fixed composition; the preceding density form is more general.
Let be a nonzero admissible mode, multiply the equation of part (d) by its complex conjugate and integrate between the cylinders. The endpoint conditions remove the boundary term in integration by parts, giving the Rayleigh stability integral identity
Rearrange to obtain a real Rayleigh quotient:
The denominator is strictly positive. Consequently, with the paper's convention,
The weak inequality excludes exponentially growing axisymmetric modes, but permits marginal cases and possible algebraic growth when the restoring effect vanishes. Strict negativity avoids that degeneracy. Equivalently, the conventional Rayleigh discriminant is positive, or the squared specific angular momentum increases outward:
This is the Rayleigh centrifugal stability criterion. In the suggested time-independent Schrödinger equation analogy, a growing mode has ; if , its effective potential is nonnegative. The nonnegative kinetic term and that potential cannot have the required negative eigenvalue , which gives the same exclusion.
As a sign check, for solid-body rotation and . In a gap of width , the radial modes have
as expected for inertial waves. The argument establishes axisymmetric inviscid stability within the stated thin-gap model, rather than a claim about all perturbations of a viscous flow.
Use the thin-annulus approximation stated in the source, so . Let
Here is the conventional Rayleigh discriminant, also the squared local radial epicyclic frequency when positive. For and , the azimuthal and axial mode equations give
The thin-gap incompressible flow condition then gives . Substitute these into the radial equation:
Thus
To put this into exactly the form printed in the paper, define
The narrow-gap centrifugal stability equation is consequently
The two rigid cylinders are impermeable, so the no-penetration boundary condition gives
There is no inviscid no-slip condition on the tangential or axial components.
The sign deserves emphasis: the source's printed plus sign makes its the negative of the conventional Rayleigh discriminant. Using the conventional positive discriminant instead requires a minus sign in front of that potential term. These are equivalent conventions; replacing one without adjusting the other would falsely predict instability of solid-body rotation. The and marginal cases, excluded by these eliminations, must be treated separately or by limits.
Expand the axisymmetric Euler equations about the rotating equilibrium, retaining only terms linear in and in the pressure perturbation. The symbol in this question is the kinematic pressure perturbation,
The linearized centripetal term in the radial equation is , after subtracting the equilibrium term . Radial advection of the background azimuthal velocity, together with the cylindrical-coordinate term , gives
This is the azimuthal coupling in the second equation; it also expresses conservation of specific angular momentum for a radially displaced element. The axial equation is acceleration balanced by . Finally, the axisymmetric incompressible flow condition in cylindrical coordinates is
which expands to the last supplied equation. Background azimuthal advection contributes no term because the perturbations are axisymmetric.
For a homogeneous Newtonian fluid with constant kinematic viscosity , assume the same steady purely azimuthal flow. In cylindrical coordinates, the azimuthal Navier-Stokes equation has no pressure forcing or convective term in this state, and becomes
Equivalently, , or . Two integrations give the steady circular Couette profile,
This is the basic Taylor-Couette flow between rotating cylinders. The constants depend on boundary angular velocities; for radii and prescribed angular velocities ,
If the domain includes , regularity requires , leaving solid-body rotation. On an annulus a nonzero is allowed and wall torques maintain the shear.
The restriction concerns a steady profile. An arbitrary initial angular velocity does not cease to exist when viscosity is introduced; within the purely azimuthal ansatz it evolves according to until compatible boundary conditions and angular-momentum constraints determine its long-time state.
For a steady axisymmetric flow , incompressible flow is automatic. The only material acceleration is centripetal, . The radial Euler equations therefore require
With no viscosity there is no tangential shear stress to redistribute angular momentum. Any sufficiently regular can therefore be a steady inviscid profile, with the radial pressure adjusted by integrating this equation. This is a statement of equilibrium, not of stability: some such profiles are centrifugally unstable.
Using the supplied first critical value , the critical radius of a pressure-confined isothermal sphere is
No radius in metres can be specified without and a central mass density. Here is the isothermal sound speed, consistent with the fixed-temperature variations in part (d). At a given central mass density, equilibria truncated at lie on the first stable branch, while increasing the dimensionless outer radius beyond this first threshold gives an unstable configuration. Numerical integration gives , consistent with the paper's rounded .
For a transparent comparison with the given Jeans length, set the uniform comparison density and use the same speed of sound. Then
Both scales express the competition between pressure support and self-gravity, with characteristic length . Their numerical closeness under this density choice does not mean that the models impose the same threshold: is a boundary radius, whereas is the wavelength of a perturbation. Comparing with would instead give a factor about . Using the sphere's mean or boundary density instead of its central density changes the coefficient again, so the reference density must always be stated.
The pressure-confined isothermal sphere gives an actual finite, centrally concentrated hydrostatic equilibrium and an explicit confining pressure, making its radial stability threshold more self-consistent for a roughly spherical isothermal cloud. The uniform Jeans instability model gives a simpler local criterion, includes perturbations at different wavelengths, and does not require constructing a spherical equilibrium. Its ideal uniform static infinite background requires the Jeans swindle or an explicitly specified treatment of background gravity. Neither model includes rotation, magnetic fields, turbulent support or a realistic temperature evolution, so neither is a universal collapse criterion.
Figure 1.
Numerically integrated isothermal-sphere density profile and the first pressure turning point along a fixed-mass sequence
. Details.
Along a family of equilibria at fixed temperature, and the dimensionless function are fixed. The boundary mass density changes through both and the boundary coordinate :
From part (c), , where is constant at fixed temperature and . Set its logarithmic variation to zero:
The isothermal Lane-Emden equation gives , so the fixed- relation is
Substitute back into the boundary-density variation:
For a nontrivial variation at a finite positive radius, its vanishing gives the fixed-mass turning point of an isothermal sphere:
This derivative follows a fixed-mass sequence of equilibria; it is not merely the spatial derivative of density inside one sphere. The corresponding radial variation is
At small , : the boundary density increases while the radius decreases along increasing , giving the stated negative of the stable branch. The first density turning point marks its first loss of radial stability; it need not be confused with a turning point of radius itself.

There are unlisted articles, also show them or only show them.