For a singular isothermal sphere of dispersion and gas fraction , placing all gas inside radius onto a hole in time gives . This is an optimistic supply bound that omits angular momentum transport, star formation, and active-galactic-nucleus feedback. A numerical comparison with the Eddington accretion rate requires a gas fraction, reference radiative efficiency, opacity, and crossing-time convention.
Halo baryon-to-star conversion efficiency Created 2026-10-07 Updated 2026-10-14
The integrated halo star-formation efficiency is the fraction of a dark matter halo's reference baryonic mass converted into stars: , with cosmic baryon fraction . It is distinct from star-formation efficiency per free-fall time. Cooling, gas supply and retention, stellar feedback and active-galactic-nucleus feedback make it strongly dependent on dark matter halo mass. With stellar mass-to-light ratio , a simple central-galaxy mapping is . Changing this efficiency changes both the mapping and the logarithmic Jacobian between the dark matter halo mass function and the luminosity function.
The dark matter halo population follows gravitational hierarchical galaxy formation: many low-mass dark-matter haloes and an exponentially rare high-mass tail. The Press-Schechter halo mass function captures this broad form. A constant conversion from dark matter halo mass to luminosity would simply rescale that distribution and predict too much light from both very small and very large systems. The luminosity function instead has a shallower faint end and a sharp bright-end decline, often described by a Schechter function,
Define the halo star-formation efficiency as , distinguishing this integrated baryon conversion from the star-formation efficiency per free-fall time. If the stellar mass-to-light ratio is , a simple one-central-galaxy mapping is . For a monotone mapping without scatter,
Thus a mass-dependent conversion efficiency and its Jacobian change the shape, not just the horizontal scale, of the luminosity function. Scatter, satellites and the stellar mass-to-light ratio add further differences.
Figure 1.
Schematic halo and galaxy abundance shapes and the integrated baryon-to-star efficiency versus halo mass
. Details.
In shallow potential wells, photoheating can prevent gas accretion, while stellar feedback from radiation, stellar winds and supernovae heats or ejects gas. These effects lower halo star-formation efficiency toward low mass, helping flatten the faint end. The need for atomic or molecular line cooling also affects the smallest systems. Intermediate-mass dark-matter haloes retain gas and cool efficiently, so the integrated conversion reaches a maximum around galactic dark matter halo masses.
In massive dark-matter haloes, long optically thin gas cooling times and stable hot atmospheres reduce fresh cold-gas supply. Active-galactic-nucleus feedback can replenish the thermal energy lost in cooling and suppress a cooling flow, reducing halo star-formation efficiency and sharpening the bright cutoff. Massive group or cluster dark-matter haloes contain many distinct galaxies rather than one object with luminosity proportional to their entire mass. Galaxy mergers redistribute stars and can grow already formed bright galaxies, but do not turn all hot dark matter halo gas into new stars. The luminosity function is the gravitational dark matter halo population filtered through strongly mass-dependent baryonic physics. The plotted abundance and efficiency curves are qualitative examples, not observational fits or calibrated mass-to-light relations.
Let and define the cosmological density power spectrum by . The contribution per logarithmic wave-number interval is the dimensionless cosmological power spectrum . The linear cosmological mass variance on mass scale is
with a comoving smoothing radius and the top-hat filter in Fourier space. On halo scales the observed spectrum is consistent with greater variance at smaller masses. Growth therefore brings smaller objects to the collapse threshold earlier, statistically; larger structures assemble by accretion and dark-matter halo mergers. This statistical growth from smaller bound systems to larger ones is hierarchical galaxy formation. It is an ordering of dark-matter assembly, not a rule that every small visible galaxy must precede every large visible galaxy.
For linear modes the linear growth factor gives . During matter domination , so and the characteristic nonlinear mass increases. Once modes become nonlinear, coupling between scales and halo formation change the shape, so the same multiplication cannot be used for the entire late-time spectrum. At low redshift accelerated expansion suppresses linear growth. Galaxy clustering traces the matter spectrum with galaxy bias; it should not be equated directly with an unbiased matter measurement.
The broad linear shape was set by the cosmological transfer function before and around matter-radiation equality, with baryonic acoustic structure also imprinted before recombination. A nearly scale-invariant primordial curvature spectrum has , with close to one. After converting curvature perturbations to matter-density perturbations,
Thus nearly scale-invariant primordial curvature does not mean a constant density . Modes with enter the horizon after equality and have . Modes with enter during radiation domination, when radiation controls the expansion and cold-matter perturbations grow only slowly. The cold-dark-matter transfer function behaves approximately as at large . Hence the density spectrum turns over near :
The turnover records the equality horizon, while the late nonlinear excess records gravitational clustering. On galactic scales the effective slope is greater than , giving the growing small-scale variance needed for hierarchical galaxy formation.
Cold dark matter has negligible primordial thermal velocities and a very short collisionless free streaming length on galactic scales. Warm dark matter has appreciable residual velocities while structure is being seeded; particles stream across small fluctuations and reduce their contrast. Its cosmological transfer function is consequently cut off below a characteristic length, suppressing low-mass halos and delaying their formation. Above that cutoff its assembly can still be hierarchical. The important distinction is the free-streaming scale, rather than the present temperature or an arbitrary particle-mass label.
Linear evolution assumes . When becomes of order unity, overdense regions depart strongly from the Hubble flow and can turn around and collapse. Collisionless dark matter develops multistream motion after trajectories cross; gravitational mixing redistributes energy and produces a bound dark matter halo. The formal infinite-density collapse of an ideal spherical pressureless solution is not the physical endpoint. A roughly virialized halo has and a characteristic virial velocity . Its gas virial temperature is conventionally
It measures the thermal energy associated with the gravitational potential; the numerical factor depends on the velocity-dispersion convention. It does not imply that the collisionless dark matter has a thermodynamic gas temperature.
The unheaded request about baryon conversion efficiency of a halo is also answered here. Define using the cosmic baryon fraction . In small halos, shallow potentials let stellar feedback drive outflows or repeatedly heat star-forming gas; supernova energy per stellar mass is roughly fixed while binding energy per gas mass scales as . Photoheating during reionization also prevents very small halos from retaining or accreting cool gas. Molecular/atomic cooling thresholds further reduce star formation in the smallest systems. These effects make fall toward low mass.
Near , gas can cool efficiently and the potential is deep enough to retain more of it, while a long-lived hot atmosphere and maintenance heating are less effective than in larger systems. At high mass, higher virial temperature and lower cooling efficiency let a substantial hot atmosphere persist. Active-galactic-nucleus feedback can prevent that atmosphere from supplying cold gas and can expel some gas; the cooling-time bottleneck alone is not an adequate explanation for the low stellar fractions of massive groups and clusters. The peak reflects a competition between gas supply/cooling and feedback, rather than complete conversion of all baryons at a sharply universal mass. Its exact location and height depend on epoch, metallicity, gas history and the stellar population included.
In the Lambda-CDM model, nearly Gaussian primordial density contrasts grow under gravity within an expanding universe containing cold dark matter, ordinary baryons and a cosmological constant. The cold dark matter is effectively collisionless and has negligible pressure on galactic scales. Before recombination, baryons are coupled to the photon fluid: radiation pressure and acoustic oscillations prevent their perturbations from behaving like pressureless matter. After recombination they can fall into the gravitational potentials already established by dark matter, subject to gas pressure and the Jeans mass.
For small density contrasts, evolution is linear. On pressure-free scales the growing mode is multiplied by the linear growth factor , with during matter domination. The cosmological density power spectrum can be written
Here is the cosmological transfer function. For nearly scale-invariant initial conditions, the large-scale matter spectrum behaves approximately as , whereas well inside the matter-radiation equality scale it falls approximately as , until the microscopic dark-matter cutoff matters. This fall of the dimensional does not imply less fluctuation power on every smaller mass scale: the power per logarithmic wavenumber is , and the smoothed matter density variance is obtained by integrating it against a mass-dependent window. Over the relevant cold-dark-matter hierarchy, smaller mass windows generally have larger variance.
The hierarchical galaxy formation picture follows: fluctuations on small mass scales typically reach the nonlinear collapse threshold first, while larger objects assemble later through accretion and dark-matter halo mergers. It is a statistical ordering, not a claim that every small object precedes every large rare peak. When becomes order unity, the linear growth factor is no longer a solution for the local density. Collisionless dark matter develops multistream regions and bound dark matter halos; phase mixing and violent relaxation redistribute orbital energies, and virialized structures approximately obey the virial theorem.
Baryons have an additional nonlinear route. Infall and shocks convert bulk kinetic energy into thermal energy, with characteristic virial temperature
Unlike collisionless dark matter, the gas can lose this energy through radiative cooling. The optically thin gas cooling time is the thermal-energy density divided by the radiative loss rate, for example
The density convention in must agree with the denominator; the astrophysical cooling function can also be defined using instead. The cooling criterion for galaxy formation compares this time with the collapse or supply time. Rapidly cooling gas loses pressure support, contracts and can form stars. Slowly cooling gas remains in a hot atmosphere. Stable virial shocks are not obligatory in every low-mass system: gas can also arrive in cold streams and cool while being accreted.
Angular momentum prevents indefinite radial contraction. Tidal torque theory supplies an initial halo spin, and later mergers change it. If gas radiates energy while retaining much of its specific angular momentum, it settles into a rotationally supported galactic disk rather than reaching the centre. The relation explains why modest halo spin can set a disk radius much smaller than its virial radius of a dark-matter halo. Torques, bars and gravitational encounters can transport angular momentum outwards and feed central concentrations; radiative cooling alone does not remove it.
Galaxy mergers alter stellar structure as well as assembling mass. A major galaxy merger can strongly disturb or destroy an existing galactic disk, randomizing stellar orbits and creating a spheroid through violent relaxation. A gas-rich galaxy merger also permits dissipation, inflow and a burst of star formation; gas left over or accreted afterwards can rebuild a galactic disk. Minor galaxy mergers add stars to outer components, thicken disks and grow bulges. Dry galaxy mergers add stellar mass and can increase size without much new star formation. Halo merging therefore does not imply instantaneous merging of its galaxies: satellite orbital decay requires Chandrasekhar dynamical friction and can take a substantial time.
The atomic and molecular cooling thresholds for galaxy formation supply a lower characteristic scale. Primordial atomic gas cools inefficiently below roughly because electronic excitation is suppressed. The corresponding halo mass is of order at a redshift of order ten, with approximate dependence at fixed threshold temperature. Molecular hydrogen can cool gas at hundreds of kelvin and permit smaller early objects, provided it forms and survives dissociating radiation. Metal-line cooling changes these thresholds after enrichment. Thus the atomic threshold is not an absolute minimum mass for all stellar systems.
At the other end, sufficiently massive dark matter halos have high virial temperatures and low-density hot gas. Above the strong atomic-line-cooling interval, thermal bremsstrahlung has . At comparable halo gas density, , while depends mainly on formation density. Cooling therefore becomes less able to condense all the gas within the available time. This upper galaxy mass from gas cooling argument selects galaxy-sized condensations, broadly halo masses around – in simple low-redshift estimates, rather than single luminous galaxies containing every baryon in a group or cluster. Its numerical scale depends on epoch, metallicity and gas profile. Subsequent galaxy mergers can build larger stellar systems; cooling is not an absolute upper bound on their final mass.
Finally, a Press-Schechter halo mass function has many low-mass objects and a steep high-mass cutoff, while the luminosity function of galaxies also has a faint component and a bright cutoff, often described by a Schechter function. The two shapes are related through the halo-to-galaxy luminosity mapping, not by identifying luminosity with total halo mass. In the idealized one-central-galaxy, no-scatter limit,
If and , then . A constant conversion gives similar shapes. Actual stellar feedback, inefficient low-temperature cooling and reionization suppress faint galaxies relative to small haloes, while long cooling times and active-galactic-nucleus feedback suppress luminosity at large halo masses. Satellites, scatter, stellar populations and dust further affect the correspondence. The halo hierarchy supplies the gravitational framework; cooling, angular momentum and feedback determine which parts become luminous galaxies.
The singular isothermal sphere has one-dimensional velocity dispersion , density , and enclosed mass . The gas mass inside is therefore
Taking the dynamical crossing time to be , the dynamical upper bound on black-hole fuelling is
The cancellation of is special to the singular isothermal sphere. At , this is approximately
Use the stated M-sigma relation to set . Defining the Eddington accretion rate with a reference radiative efficiency of black-hole accretion ,
Combining this with gives
Thus a gas fraction of order -- and the usual give roughly -- times the Eddington accretion rate, below at the requested dispersion. Using a crossing time instead changes the coefficient by , so this is an order-of-magnitude estimate rather than a sharp universal bound. The problem does not specify or the rate convention: without these choices, the numerical claim cannot be proved for every gas fraction. Defining the rate as would make this ratio ten times larger.
This is extremely optimistic because it gives every gas element a direct path to the hole on a crossing time. In a real galaxy, gas must shed angular momentum, avoid conversion into stars through star formation, cool sufficiently to flow inward, and survive active-galactic-nucleus feedback. A rotating accretion disk generally transports material on a viscous timescale, much longer than the orbital crossing time. Most available gas need not reach the central hole. If the hole is supplied at approximately the Eddington accretion rate, only about one percent of this optimistic dynamical supply reaches it; the actual percentage depends on its luminosity and duty cycle, so the bound alone is not a measurement of the fuelling efficiency.
For the temperature jump, use Bondi accretion as the local hot-gas estimate:
Assuming the initial gas had , its density has not yet changed, and its polytropic coefficient remains comparable, heating to gives
The capture radius also shrinks by about . Subsequent expansion can lower the density and suppress the mass accretion rate further. The result illustrates thermal suppression of black-hole accretion and negative active-galactic-nucleus feedback: vigorous activity can shut off its own gas supply. The factor is conditional on the fixed-density comparison; the previous dynamical upper bound is not itself an actual pre-heating Bondi rate.
This mode is most plausible for a nearly stationary supermassive black hole immersed in the hot, pressure-supported, X-ray-emitting atmosphere of a massive elliptical galaxy. Such gas is comparatively smooth, its random and rotational speeds can be smaller than its sound speed, and radiative cooling can be slow on the inflow scale.
The ideal Bondi accretion assumptions can fail in several independent ways. The gas may carry enough specific angular momentum to circularize into an accretion disk; a galaxy's stars and dark matter can dominate the gravitational potential outside the black hole's sphere of influence; the hole can move relative to the gas; cooling, conduction, or external heating can destroy adiabaticity or isothermality; a multiphase or clumpy medium is not a uniform reservoir; magnetic fields, turbulence, and viscosity add stresses absent from the spherical model; and AGN feedback, winds, or jets can expel or recirculate the inflow. Time dependence and self-gravity provide further failures. Thus a Bondi estimate is best interpreted as an idealized supply rate, not automatically as the rate crossing the event horizon.