A typical voltage-gated potassium channel has four subunits, each with six membrane-spanning segments. S1–S4 form a voltage-sensing domain; S5–S6 and their intervening loop form the pore and selectivity filter. Conserved positively charged side chains along S4 move through part of the membrane electric field when the voltage changes. Countercharges and hydrated crevices in the surrounding sensor help make this movement possible. Coupling between the sensor and pore, including the S4–S5 region and S6 gate, changes the probability of opening. A voltage-gated sodium channel usually combines four related domains in one large protein, rather than four identical independent proteins.
The evidence separates charge movement, structural arrangement and functional coupling. A transient ion-channel gating current can persist when permeating ionic electric current is suppressed: some charged parts of the channel itself move. Comparing integrated ion-channel gating charge with channel opening tests their coupling. Charge-neutralization experiments change both total moved charge and voltage dependence, implicating S4 basic residues and countercharges elsewhere; they do not show that S4 alone supplies every charge. [ref]
Crystal structure of a mammalian voltage-dependent Shaker family K+ channel by Stephen B. Long and others supplies structural evidence for the arrangement. Voltage-dependent accessibility and optical reports of sensor motion provide complementary functional tests. No one static structure is a movie of gating, and a perturbation that abolishes current can disrupt folding or pore function rather than selectively remove voltage sensing. Agreement between structural, electrical and motion-sensitive measurements supports the mechanism more strongly than any one observation alone.
Write the instantaneous electrical conductance as . Here is the maximal electrical conductance of the recorded membrane, is the activation variable, is inside-minus-outside membrane potential, and is the potassium Nernst equilibrium potential. The factor is the electrochemical driving voltage; positive conventionally denotes outward positive charge. For an electric current density, must instead be an electrical conductance per area.
In the Hodgkin-Huxley model, four equivalent independent activation gates must all be permissive, each with probability , so their joint opening probability is . At fixed voltage each gate obeys
The model assumes approximately Ohmic open-channel conduction, a well-defined population-average electrical conductance, and an almost constant potassium reversal potential during a brief recording. Four phenomenological gates should not be mistaken for a proof of four physically independent molecular transitions. The simple delayed-rectifier description also omits ion-channel inactivation.
Reducing the available electrical conductance can weaken repolarization, broaden an action potential and alter repetitive firing. Depending on channel class and tissue, excess excitability or impaired recovery can follow; persistent depolarization can also reduce voltage-gated sodium channel availability. Cardiac potassium-current reductions can prolong the action potential and contribute to Long QT syndrome. These are conditional physiological consequences, not a claim that every potassium-current reduction has the same clinical effect.
The average electric current is the number of channels times their ion-channel open probability times the electric current carried by an open channel:
Consequently the identifiable answer is
TODO (missing input): The source does not supply or the potassium thermodynamic activities for this experiment. A unique numerical electrical conductance cannot follow from the listed electric current, count and ion-channel open probability alone. For the explicitly additional choice mV, pS. Taking mV instead gives pS: both match the measured electric current. The table in question 3 describes a skeletal-muscle resting state, and cannot silently supply the conditions of this separate recording.
Rapid permeation is possible because the hydrated pore and coordinating groups of the selectivity filter provide a favorable free-energy landscape for repeated ion transit. Several ions can occupy the filter and their interactions favor onward passage, while the channel remains open for many successive transits. Selectivity need not mean that each transported ion remains tightly trapped for a long time. This is passive downhill transport; it does not consume one ATP molecule per ion crossing.
Suppose initially . Positive ions initially move by diffusion from side 1 to side 2. Since negative counterions cannot cross, side 1 acquires a negative interfacial charge and side 2 a positive one. The resulting electrical force opposes further positive-ion transfer. The two contributions balance when the electrochemical potentials are equal; individual ions still cross in both directions, but there is no net electric current of the permeant chemical species.
A simple capacitor model makes the feedback quantitative. If moles of monovalent positive ions move from initially neutral side 1 to side 2, the charge on side 1 is , hence . The free-energy stationarity condition is
As increases, both the concentration imbalance and the voltage drive toward reversal diminish the original diffusion tendency. The equilibrium lies before the bulk concentrations become equal. This demonstrates why a nonzero Nernst potential can coexist with very little change in bulk composition and approximate bulk electroneutrality. A concentration difference alone does not maintain an electrical voltage if both counterions can freely follow each other; selective permeability is essential to this model.
At a common membrane voltage, an ion is in electrochemical equilibrium only if its own Nernst potential equals that voltage. The four independently calculated equilibrium voltages are
Thus at mV only chloride is at its listed equilibrium voltage. Potassium has an outward positive-current driving voltage mV. Sodium and calcium have negative driving voltages, and mV respectively, favoring inward positive-ion movement when their channels are open. Chloride has zero net electrochemical drive under these ideal conditions.
A resting potential is not a claim that every permeant chemical species is in thermodynamic equilibrium. A membrane with several electrical conductances can have zero total electric current even though individual ionic electric currents flow and cancel. Pumps maintain the concentration differences by consuming Gibbs free energy. Conversely, a closed channel can prevent substantial ion flux even when the ion's electrochemical potential difference is nonzero: absence of flux due to impermeability is not the same as electrochemical equilibrium. The listed concentrations could not all be passive equilibrium distributions at one voltage because their Nernst potentials differ.
Ion-channel deactivation and ion-channel inactivation are different. Ion-channel deactivation closes an activation gate when the voltage returns toward rest. Ion-channel inactivation makes a channel unavailable even while depolarization remains favorable for activation. A minimal kinetic picture is a closed state, an open state and an unavailable state, with recovery required before reopening. This helps terminate inward electric current and produces a neuronal refractory period.
In rapid voltage-gated potassium channel N-type inactivation, a cytoplasmic terminal segment, sometimes supplied by an auxiliary subunit, blocks the open inner pore. The classic ball-and-chain inactivation picture is supported by loss of rapid ion-channel inactivation after removing the relevant terminal segment and restoration by an appropriate soluble peptide. This links a mobile structural element to open-pore blockade; it does not imply that all potassium channels use that mechanism.[ref]
Slower C-type inactivation involves rearrangement near the selectivity filter and external pore. Dependence on pore structure, ion occupancy and extracellular ions distinguishes it from a simple cytoplasmic plugging particle. Different channels can combine several unavailable states, so a single recovery time constant need not describe every trace.
Fast ion-channel inactivation in canonical animal voltage-gated sodium channels involves the intracellular linker between domains III and IV, including its hydrophobic IFM motif, and is coupled to domain-IV voltage-sensor activation. The modern structural interpretation is an allosteric latch acting on the gate, rather than a universal literal particle sitting in the ion pathway. The older hinged-lid analogy is useful only with that qualification.[ref]
Functionally, a voltage clamp trace shows electric current declining during a maintained step; a second test pulse measures recovery of availability. Holding-potential dependence separates an altered fraction of available channels from a mere change in maximal open electrical conductance. Persistent electric current after defective ion-channel inactivation, or delayed recovery that reduces subsequent responses, illustrates why both entry into and exit from unavailable states matter for excitability. A decaying macroscopic electric current alone does not uniquely identify the molecular mechanism.
Represent one permissive voltage-gated potassium channel gate by an available closed state and an activated state, with voltage-dependent transition rates and . Gain minus loss gives
During a voltage clamp step the imposed voltage and hence these rates are constant. Integration with gives
The fourth power in the electrical conductance describes four permissive activation variables in the Hodgkin-Huxley model phenomenology. If all must be permissive and are statistically independent, their joint probability is . Even a simple exponential rise in then gives a delayed-looking macroscopic potassium electric current. The second panel of the model figure in solution illustrates this. A continuously changing voltage makes the rates time dependent and requires solving the differential equation along that voltage trajectory; one fixed exponential is not the general action-potential solution.
selective permeability sets the driving-force term. Potassium and sodium channels provide narrow coordinating pathways whose free energy balance of hydration and chemical binding favours the appropriate ion. voltage-gated potassium channel carbonyl coordination differs from the charged filter environment in canonical sodium channels, so selective permeation is not a pore-size ranking. Ion substitution shifts the reversal potential, and selective blockers or filter mutations alter the corresponding electric current. An open channel conducts down the electrochemical gradient; ATP-driven pumps maintain the gradients rather than pushing each ion through the pore.
Voltage-dependent activation sets channel availability. Charged residues in the S4-containing voltage-sensing domains move in the membrane electric field and couple to pore opening. A classical voltage-gated potassium channel is a tetramer; a voltage-gated sodium channel pore-forming polypeptide has four homologous domains. ion-channel gating current measurements and sensor-residue mutations connect electric charge motion to opening, while structures separate the sensor from the permeation pathway. The historical and variables describe kinetics phenomenologically and need not map one-to-one onto individual resolved structural movements.[ref][ref]
Time dependence, especially ion-channel inactivation, explains the different electric current waveforms. Sodium activation is rapid, but sustained depolarization reduces the availability variable , so the sodium electric current decays despite maintained driving voltage. Fast sodium ion-channel inactivation involves intracellular machinery including the interdomain III–IV region. Potassium activation is slower, supplying delayed outward electric current; the classical delayed rectifier is relatively sustained on this time scale. Some voltage-gated potassium channel variants do show rapid N-terminal pore-blocking ion-channel inactivation or slower filter-associated ion-channel inactivation, which should not be assumed identical to sodium's mechanism. voltage clamp steps separate activation from decay; recovery protocols, single-channel recordings and targeted perturbations distinguish gating, ion-channel inactivation and ion conduction. Removal of the Shaker N-terminal blocker and restoration by a free peptide are particularly direct evidence for one voltage-gated potassium channel mechanism.[ref][ref]
Together these properties produce and : selectivity fixes reversal potential, maximal electrical conductance fixes scale, and activation/inactivation variables supply voltage- and history-dependent open probability.
Including both end faces of the perfect cylinder, with and ,
The membrane capacitance is . The required net inward electric charge is , or monovalent ions. If sodium supplies that net electric charge, Faraday constant gives
The final concentration is about , only above the starting value. Neglecting the end faces changes the estimate by , giving about . Over the capacitive electric charge corresponds to mean net electric current ; the duration does not otherwise enter the total electric charge.
This is a net capacitive estimate, not a measurement of total sodium influx. Simultaneous outward potassium electric current makes actual sodium entry larger, and most bulk ions remain near their original concentrations during one spike. Long-term pumps restore gradients after repeated firing; they are not required to replace the entire intracellular sodium pool during the two-millisecond voltage rise.
The equivalent circuit has membrane capacitance in parallel with electrical conductance–battery branches: voltage-dependent sodium and potassium conductances in series with their reversal potentials, a chloride electrical conductance in series with , and other leak conductances. For externally supplied electric current,
The model figure in solution includes this circuit and an illustrative passive response. Although chloride electric current is small when , a perturbation produces the restoring electric current . A large chloride electrical conductance therefore shunts perturbations, lowers input resistance and shortens the passive time constant, and .
Reducing that electrical conductance increases the voltage response to a given electric current or extracellular-potassium disturbance and weakens stabilization near rest, making repeated excitation easier. There need not be an instantaneous shift of resting voltage if equals the old rest exactly. In skeletal muscle, loss of ClC-1-mediated stabilization is associated with myotonic hyperexcitability.[ref]
Later cessation of contraction can be explained by sustained depolarization causing voltage-gated sodium channel ion-channel inactivation and failure to recover: fewer available channels support progressively smaller or less frequent spikes until depolarization block occurs. Accumulated extracellular potassium in restricted spaces and incomplete recovery between spikes can promote that depolarization. This requires the nonlinear voltage-gating dynamics; a passive chloride resistor and capacitor alone cannot generate or terminate an action-potential train. The stated membrane permeability change does not uniquely determine the time to block or prove one particular ionic accumulation history.
At the initial negative membrane potential, most voltage-gated potassium channels have a closed activation gate. Depolarization moves charged residues in each voltage-sensing domain, particularly the S4 helices, through the electric field. Coupling between the voltage-sensing domains and the pore opens the intracellular gate. A classical voltage-gated potassium channel has four subunits, each with six transmembrane helices; S5, the pore loop and S6 contribute to the central pathway and selectivity filter. The rising open probability produces increasing outward potassium electric current, since the imposed positive membrane potential is above the potassium Nernst equilibrium potential. Here outward electric current is positive: , where is channel number and is single-channel electrical conductance.
The electric current subsequently falls because the rapidly inactivating Shaker form exhibits ball-and-chain inactivation. An intracellular N-terminal domain, tethered to the channel, blocks the open pore. The ion channel can therefore stop conducting while the membrane potential remains depolarized and the activation machinery remains activated. This is ion-channel inactivation, rather than reversal of the voltage step, loss of the ionic driving force, or ordinary gate closure. Repolarization favors removal of the block and recovery of channel availability. Slower C-type inactivation involving the outer pore can coexist, but is not the principal explanation of the rapid decay described here.
Several independent observations connect this functional explanation to structure. Small transient gating electric currents report movement of sensor electric charge before ionic conduction; charge-neutralization studies of S4/S2 change the measured gating charge and activation. Structural studies resolve separate sensor and pore regions.[ref][ref] Historical N-terminal removal abolished rapid ion-channel inactivation while preserving activation, and the corresponding free peptide restored block from the cytoplasmic side. These results separate the activation gate from the tethered blocker and identify which side of the cell membrane contains the blocking domain.[ref][ref]
Source-gap TODO: the supplied PDF's figure invokes an undefined image object, so its actual pulse duration, pulse sequence, current scale, peak amplitude, decay time and any tail-current waveform cannot be read. The account above uses only the stated change from to and the stated rise and rapid decay; no numerical kinetic fit or reconstruction of the missing trace is claimed.
For two-state ion-channel gating, write . Gain minus loss of open probability gives the ordinary differential equation
Thus the ratio of the transition rates determines the final open probability, while their sum determines the response speed. Both given channels have . For an initially closed population, with measured in milliseconds,
The mean individual open and closed lifetimes are and : both are for A and for B. With the same channel number, single-channel electrical conductance and driving force, the steady macroscopic electric currents are equal, but B reaches that value ten times faster. If both populations were already at , neither would show a mean relaxation under these fixed rates: a response also requires an initial condition or a change in rates.
The stationary variance of the number open is for independent channels. Its autocovariance is , so B's fluctuations decorrelate ten times faster even though their instantaneous variance is unchanged. Faster gating allows an ion channel population to follow a brief stimulus and contribute to rapid action potential timing. Slower gating integrates over brief changes and can provide a delayed opposing electric current, useful in setting action potential duration or frequency selectivity. Those examples describe consequences of kinetics; the stipulated voltage-independent rates alone do not define a complete excitable neuron.
Add a nonconducting inactivated state to the continuous-time Markov chain:
For example, and . Depolarization first increases , then transfers population into by ball-and-chain inactivation. A small recovery rate during the pulse permits a sustained decline of . Repolarization favors recovery, eventually restoring the closed but available population. Several sequential closed states can represent the cooperative movements of four voltage-sensing domains; three states are the minimal explanation of rise followed by decay, rather than a quantitative fit to the missing trace.
Loss of outward potassium electric current weakens repolarization and can broaden an action potential. Reduced residual potassium electrical conductance can reduce the subsequent hyperpolarization and permit faster repeated firing. Conversely, prolonged depolarization can maintain sodium ion-channel inactivation, delay recovery and lower the maximum firing frequency or cause depolarization block. The sign of the frequency change depends on the other ion channels and recovery kinetics; rapid potassium ion-channel inactivation alone does not fix it.
The passive upper limiting membrane potential for a purely sodium-selective pathway is its Nernst equilibrium potential. Equal inside and outside electrochemical potentials, using ideal concentrations, require
This is the maximum absolute inside-minus-outside voltage under the stated passive assumptions. If the reference resting membrane potential is , the corresponding increase is about .
Actual action potentials usually peak below because voltage-gated sodium channels undergo ion-channel inactivation, while outward potassium and leak electric currents oppose inward sodium electric current. Finite membrane capacitance and finite available time also prevent instantaneous equilibration. At , the sodium driving force itself is zero.
An ion channel supplies a water-accessible pathway through the otherwise strongly insulating, hydrophobic lipid bilayer. Moving a hydrated ion directly into that low-permittivity region is energetically expensive. The channel's polar pore and coordinating groups reduce the barrier while retaining selectivity. Transport is passive: the electrochemical potential difference drives net movement, and the channel does not itself pump an ion uphill. For an ideal species of charge number ,
The net electric current of a pathway permeable only to that species reverses at its Nernst equilibrium potential. An open channel can carry zero net electric current at that voltage even while individual ions cross both ways.
The selectivity filter balances loss of the hydration shell against favorable coordination within the pore. In a typical potassium channel, backbone carbonyl oxygen atoms create appropriately arranged binding sites for a substantially dehydrated potassium ion. The smaller sodium ion is not automatically preferred simply because it fits geometrically: its hydration is stronger and the filter does not compensate its dehydration in the same way. Geometry, flexibility, coordination chemistry and ion occupancy all matter. Sodium-selective and calcium-selective channels use different arrangements, often involving charged side chains; a single rigid-sieve explanation is inadequate.
Rapid passage coexists with transient binding because several nearby sites have comparable free energies and relatively low barriers between them. Multiple ions occupying a pore influence one another through electrostatic interactions, enabling correlated exchange and displacement rather than irreversible trapping at one deep site. High throughput therefore requires favorable passage kinetics as well as strong discrimination against unwanted species. A more tightly bound species can even block a pathway instead of being its fastest permeant.
Gating and selectivity are distinct. A voltage-sensing domain couples membrane potential to activation-gate conformation; ligand-gated ion channels couple binding to opening; mechanosensitive ion channels couple membrane stress to opening. Ion-channel inactivation introduces additional unavailable states. None of these mechanisms alone identifies which ion the open pore prefers.
For similar independent channels, a local Ohmic approximation with outward-positive electric current is
Here open probability controls availability, single-channel electrical conductance controls current per open pore, and is the electrical driving factor in this approximation. Nonlinear current-voltage relations and mixed-ion permeation may require a fuller model. Single-channel recording resolves discrete openings; reversal shifts when ionic concentrations change test selectivity; gating electric currents test sensor motion; structural evidence identifies the pore and its coordinating groups. Together these distinguish rapid selective permeation from the separate process of opening the gate.
The rising sigmoid shows activation by depolarization: is almost zero at very negative membrane potential, rises steeply around , and approaches about at positive membrane potential. The graph describes the fraction of time a single ion channel is open, not a continuously variable opening amplitude. A convenient phenomenological fit is
Here refers to half the maximum, about , not absolute . The effective gating charge describes the steepness; a sigmoid alone does not identify the microscopic gating sequence or explain why the observed maximum is below one.
A voltage-gated potassium channel has four pore-forming subunits. Each canonical subunit contains an S1–S4 voltage-sensing domain and S5–S6 pore elements. Positive charges in S4 respond to the electric field; their displacement during depolarization changes the energetic preference of sensor conformations. Coupling through the sensor–pore interface favors opening of the intracellular pore gate. The potassium selectivity filter is structurally distinct from this voltage sensor.
Several independent observations support this account. Voltage clamp detects transient gating electric currents before pore conduction, even when ionic conduction is blocked: charge movement precedes opening. Charge-neutralization studies change total gating charge and voltage dependence, with contributions from charged S4 residues and an S2 residue. Accessibility and voltage-sensitive optical measurements support conformational motion rather than permeating potassium itself acting as the sensor. Structural measurements locate the charged sensor beside the pore. These observations constrain a coupled moving-sensor mechanism, while the exact displacement cannot be deduced from this curve alone.[ref][ref]
An open ion channel carries the electric current
The macroscopic mean is , so is the mean number open, not the total number present. Reading from the original graph gives
The graph reading is approximate, so a precision of hundreds is appropriate. Only a few hundred active ion channels generate a nanoampere-scale cellular electric current; molecular discreteness and stochastic gating therefore matter. For independent identical ion channels, the open-count standard deviation is , corresponding to a coefficient of variation in electric current of about . This is an instantaneous ideal independent-gating estimate, before temporal filtering and other noise sources, and requires the single-channel recording to apply to the cellular recording conditions.
In ball-and-chain inactivation, also called N-type inactivation, a flexible intracellular N-terminal region carries an inactivation particle. Once a voltage-gated potassium channel opens, this tethered particle can enter and occlude the inner pore, stopping electric current even while the activation machinery favors an open configuration. Recovery requires the particle to leave, after which the activation gate can return to its resting conformation. This supplies an additional unavailable state, not merely reversal of activation.
The decisive evidence separates necessity from sufficiency. Removing the relevant N-terminal region greatly reduces fast ion-channel inactivation while preserving activation. Applying a peptide corresponding to the missing N-terminal region on the cytoplasmic side restores blocking with similar properties. Changes in the blocking region alter blocking kinetics, and altering the tether affects the rate at which the particle reaches the pore. Open-pore access and competition with intracellular pore blockers support occlusion of the inner cavity. A tether makes the particle's local effective concentration high, explaining rapid intramolecular block.[ref][ref]
This mechanism is distinct from slower filter-associated C-type inactivation. An N-terminal particle is a mechanism for certain potassium ion channels, not a universal explanation of all ion-channel inactivation.
In a classical action potential, delayed activation of voltage-gated potassium channels supplies outward electric current that drives repolarization. In the Hodgkin-Huxley model, for example, and . Increasing the opening rate at depolarized membrane potential, other properties fixed, recruits outward electric current earlier: the action potential generally becomes narrower and may have a smaller peak. Slower opening delays repolarization and broadens the action potential.
Slower closing after repolarization retains excess potassium electrical conductance, lengthening the after-hyperpolarization and often the interval of reduced excitability. Faster closing shortens this tail and permits earlier recovery. If activation or the available electrical conductance is insufficient, normal repolarization may fail; changing rates can also change the steady open fraction. Duration is therefore determined by the whole balance of inward and outward electric currents, not by a closing rate in isolation.
An ion channel can disturb cellular electrical activity by changing unitary electrical conductance, open probability, gating kinetics or the number delivered to the cell membrane. A useful organizing relation is
Here outward electric current is positive. Altering one channel's biophysical behavior changes the balance governing membrane potential and hence the timing or recurrence of action potentials.
Long QT syndrome, type 3. Certain disease-associated SCN5A variants impair fast ion-channel inactivation of the cardiac voltage-gated sodium channel NaV1.5. Instead of vanishing promptly after the upstroke, a small persistent inward sodium electric current remains during the plateau and repolarization. Because in this phase, the residual electric current is inward and opposes the outward electric currents that would terminate the cardiac action potential. The ventricular action potential lasts longer, extending the QT interval on the electrocardiogram. Excessively prolonged or uneven repolarization permits early afterdepolarizations and dangerous ventricular rhythm disturbances.
Genetic association identifies the channel, while voltage clamp distinguishes defective ion-channel inactivation from a mere increase in channel abundance. Recordings of disease-associated channels show persistent or bursting openings; coupling measured mutant sodium electric current into an otherwise modeled cardiac membrane through dynamic clamp tests whether that kinetic defect prolongs the action potential. The phenotype is variant-specific: not every SCN5A variant increases late electric current or causes long QT syndrome.[ref][ref]
Myotonia congenita. CLCN1 encodes the skeletal-muscle ClC-1 chloride channel, which normally supplies a large resting stabilizing electrical conductance. Because the chloride reversal potential is near the resting membrane potential, that pathway resists small depolarizing disturbances. Loss of functional channels, reduced electrical conductance, or a shift in opening toward more positive membrane potential reduces the resting electrical shunt. Potassium accumulation in the transverse-tubule space during activity can then produce larger depolarizing afterpotentials and trigger further muscle action potentials after the intended stimulus has ceased. Continued electrical firing sustains contraction and delays relaxation: this is myotonia, rather than a primary inability of the contractile apparatus to relax.
Patient-family linkage and variant analysis connect the disease to ClC-1. Functional recordings of disease-associated channels demonstrate shifted voltage dependence and reduced availability near resting membrane potential; single-channel and noise measurements also resolve two conductive protopores and their gating behavior. Different variants can act through different mechanisms, so a gating shift is an example rather than an explanation of every case.[ref][ref][ref]
These examples connect contrasting current defects to their consequences: persistent inward sodium electric current prolongs cardiac action potentials, whereas loss of stabilizing resting chloride electrical conductance permits repetitive skeletal-muscle action potentials. Both causal chains require functional channel measurements in addition to a disease-associated sequence change.