For a fixed center height , the radius decreases according to the preceding current enhancement. Thus
Within the stipulated logarithmic approximation, , so . Expanding uniformly over and integrating gives
Therefore the leading correction to the isolated-droplet lifetime is
The negative correction reflects faster evaporation into the nearby reservoir. This leading coefficient also agrees with the small- expansion of the exact sphere-plane capacitance; the stipulated logarithmic approximation need not match higher orders.
The flat interface is an equilibrium reservoir with , while the droplet has the constant surface value . The exterior chemical potential satisfies the Laplace equation, tends to zero far away, and obeys these two surface values. These are exactly the electrostatic boundary conditions at a conductor for a sphere held at potential above a grounded infinite plane.
Introduce an arbitrary permittivity . In the electrostatic problem, . Therefore the diffusion-capacitance analogy gives the outward current
For an isolated sphere, its capacitance is , so . Dividing gives
Thus sphere-plane capacitance determines the evaporation enhancement. The assumed spherical shape gives the corresponding law for droplet evaporation near a planar reservoir. The local surface current is generally nonuniform, even though its total is described by a single capacitance.
Integrate the diffusion-controlled droplet growth equation: . Thus
Setting the radius to zero gives
This is the lifetime predicted by the sharp-interface quasi-static model. The final stage at a radius comparable to the interface width falls outside that approximation, while the leading lifetime for a large initial droplet is dominated by the larger radii.
The far-field composition has chemical potential zero. Local curved-interface coexistence imposes . The decaying spherically symmetric solution of the exterior Laplace equation is
With constant mobility, its outward current is
The linearized exterior composition is , consistent with the surface shift in the previous part.
For diffusion-controlled droplet growth, the interior is uniform to leading order and has no diffusive current. Replacing exterior material by interior material requires the composition jump , so conservation gives . Hence
The negative sign represents evaporation. The total outward current is , independent of in this leading quasi-static capillary approximation.
Apply force balance to one hemisphere. The pressure force is , while the interfacial tension around its equator gives . The Young–Laplace equation therefore yields
To leading order in curvature, let the two bulk compositions be and . Their curvatures agree, , so equal chemical potentials require and hence a common shift .
Since , expansion about the flat coexistence compositions gives . Matching the capillary pressure proves the Gibbs--Thomson relation in these variables:
The pressure jump balances interfacial forces; it does not permit unequal chemical potentials. A common shift in both compositions supplies a common interfacial chemical potential while their pressures differ. The expansion assumes large compared with the phi-four diffuse interface width.
Use the stable parameters . The bulk stationary points satisfy . For , has negative curvature, while the two minima are
Both have and . To establish minimization at fixed total composition, write
For mean composition with , a mixture of the two minima with volume fraction in the positive phase attains this lower bound in the bulk. Macroscopic slabs have only a subextensive interfacial excess free energy, so the bound is attained per unit volume in the thermodynamic limit. Thus constrained minimization gives phase coexistence in the mean-field approximation; at the endpoints only one phase is needed.
The two equilibrium conditions also follow directly by constrained optimization. Introduce a Lagrange multiplier for in the mixture's bulk free-energy density. Varying and gives ; varying gives . These equate the chemical potentials and pressures, respectively.
Equivalently, their bulk chemical potentials are both zero and their pressures are equal:
These are precisely the conditions of the common-tangent construction for phase coexistence: the horizontal supporting tangent touches both minima. Equal chemical potentials prevent net composition exchange, and equal pressure gives mechanical equilibrium at a flat interface.
Set the noise strengths to the model A fluctuation-dissipation relation and the fluctuation-dissipation relation for a conserved flux:
The preceding logarithmic ratio becomes
The last two terms combine as . They integrate to zero under the periodic boundary conditions, by integration by parts. The remaining term is by the functional chain rule, hence
After including the equilibrium initial weights, the forward and reversed histories have equal probability. Thus microscopic reversibility is satisfied by the two channels together, with each channel's own thermal noise strength.
Put . The noises required by a joint trajectory are and . Their independent Gaussian white noise weights give the joint path probability of an order parameter and its flux:
For the physically reversed path, is time-even and the transport flux is time-odd. Therefore , , and
The common factor includes the two noise normalizations and the midpoint Jacobian determinant. Its calculation must include both relaxation channels. On a finite spatial grid, let and represent the divergence and gradient, with the discrete Laplacian, and let be the Hessian matrix of at the midpoint of time step . Differentiating the two required noises with respect to the next configuration and the interval flux gives the Jacobian matrix
Using the Schur complement, its Jacobian determinant, apart from the path-independent power of , is
Reversal visits the same midpoint configurations in reverse order, so the product of these factors is unchanged. The joint time-reversal invariance of a path Jacobian therefore involves the complete relaxation operator .
Taking the action difference gives
Repeated component indices are summed. The second squared norm sums over both flux indices. This is mixed conserved and nonconserved order-parameter dynamics; reversing the order parameter history while leaving the flux unreversed would give the wrong probability ratio.
The Fourier transform turns into multiplication by . Each Cartesian component is an Ornstein-Uhlenbeck process:
Since , the transient from the remote past vanishes, and the integrating-factor solution is
Using the stated Gaussian white noise covariance and assuming ,
Interchanging the times gives the stationary two-time correlation function
At equal times this is the equilibrium Gaussian field theory covariance, and the decay time is .
The difference between the two squared actions is . The common factor cancels, giving
The last equality uses the functional chain rule with the same midpoint convention as the Onsager–Machlup functional.
At equilibrium, microscopic reversibility requires , equivalently . Comparing the coefficients of an arbitrary free-energy change gives the model A fluctuation-dissipation relation
Write and . Eliminating the noise gives . The Onsager--Machlup path probability is therefore
These are conditional path densities given the corresponding starting configuration. For a time-even vector order parameter, reversal reads the configurations backward, changes to , and keeps unchanged on each corresponding configuration.
The two Gaussian white noise measures have the same normalization. With a common midpoint discretization, the noise-to-path Jacobian also agrees under reversal by time-reversal invariance of a path Jacobian. The common factor may include that path-dependent Jacobian; it need not be a universal constant. This makes the shared-factor assertion precise while leaving the requested ratio unaffected.
In the usual three-dimensional isotropic setting, the transition is expected to be discontinuous, by the Brazovskii fluctuation-induced first-order transition mechanism.
If , write and . Then . A continuous finite-wavevector transition would require with . But the soft-mode shell integral behaves as
The positive fluctuation corrections in the self-consistency equations diverge in that limit. In particular cannot stay at a finite negative value while diverges. Thus the isotropic disordered state cannot lose stability through a zero-mass mode on a fixed nonzero shell in this approximation.
Ordering is instead expected through a free-energy crossing with a finite-amplitude smectic phase, giving a first-order phase transition. This is a reasoned fluctuation prediction for the finite-wavevector transition; the disordered Gaussian variational approximation alone does not locate the coexistence point or calculate the amplitude jump. A zero-wavevector instability or a lower-dimensional setting would require a separate analysis.
Differentiate the bound with respect to one , using and :
Thus an interior minimizing Gaussian variational kernel for a gradient quartic interaction has
Use the half-space mode density given in the question. In the thermodynamic limit, the coupled self-consistency equations are
The admissible solution must have . The coefficient is unchanged because the interaction's derivative contributes only a constant and a term.
The formal continuum integrals require the coarse-graining ultraviolet cutoff in three dimensions: the first radial integrand tends to a constant at large , so taking would leave divergent. The low-wavevector fluctuation argument is independent of this short-distance regularization.
Choose an even positive . Each independent complex Fourier mode of the real field has density , so
The quadratic part therefore has expectation . For the quartic part, apply Isserlis theorem to its four jointly centered Gaussian random variables, or to their real and imaginary components. Pairing the two differentiated fields together imposes , and its contribution is
Each of the two other pairings instead gives , because the summand is odd under . Thus only the displayed contribution remains. Each full sum is twice its positive-wavevector sum for a real field; putting and gives .
Substitute these expectations, and into the Feynman-Bogoliubov inequality:
The zero mode is absent by the composition constraint. The counting uses one representative of every nonzero pair, so no extra factor of two is assigned to an independent complex amplitude.
Apply the Jensen inequality to the convex exponential function under the trial equilibrium measure:
The given identity therefore implies . Taking minus the logarithm reverses the inequality and proves the Feynman-Bogoliubov inequality
The units make and dimensionless here. Equality holds when is constant on the support of the trial measure. Optimizing the trial parameters tightens an upper bound, which is the basis of the Gaussian variational approximation.
Average the trial field over an integer number of periods. The squared-field, squared-gradient and squared-Laplacian averages are , and , while . Hence the single-mode smectic mean-field free energy is
For the physically stabilizing case , minimization gives
The amplitude tends continuously to zero at , so this mean-field approximation predicts a continuous phase transition. The ordered minimum has free-energy density .
A nonzero alone is not sufficient for this conclusion: makes the displayed quartic amplitude energy unbounded below and requires higher-order stabilization. The continuous-transition statement uses and the stipulated fixed wavevector .
Take so that the short-wavelength quadratic energy is stable. For , a Fourier mode with wavevector magnitude has inverse Gaussian field theory covariance
For , its minimum is at
The zero-average constraint excludes the uniform mode but allows . At the modes on the nonzero-wavevector soft-mode sphere become soft; below it they have negative quadratic energy, so the homogeneous state loses stability. A modulation along any chosen direction is the simplest smectic phase pattern. The quadratic instability selects its wavelength; with , a nonlinear stabilizing interaction would still be needed to determine its amplitude.
The mass matrix is a positive-definite matrix, and integration by parts with periodic boundary conditions gives . Hence
This is energy conservation for semidiscrete Galerkin advection: . Thus the semidiscretization is stable and conserves its finite element L2 norm.
For a mesh-independent comparison with the grid norm, the Fourier symbol of is , between and . Consequently
The conserved energy therefore gives a uniform bound in as well. Equivalently, each Fourier mode evolves with the purely imaginary exponent . This concerns the semidiscrete method; a chosen time integrator must separately control those imaginary eigenvalues.
Let be a uniform periodic mesh, with indices interpreted modulo the number of nodes. Write the finite element approximation as using the chapeau functions. The Galerkin method requires
The mass matrix has and . The spatial matrix has and , with zero diagonal. Therefore the semidiscrete equations are
or equivalently . The coefficients come from integrating the products of the two overlapping piecewise-linear hat functions on each interval; periodicity supplies the wraparound entries.
For a Fourier mode, the amplification polynomial is
Put and . The roots become
If , the square root is real, both roots have modulus one, and their separation is at least . The companion matrix has eigenvectors , so their uniform separation gives a mesh-independent bound on its powers. By power boundedness of a two-level Fourier scheme and the discrete Fourier transform, this proves stability for .
If , choose . The roots have product of modulus one and unequal moduli, so one has modulus greater than one. The scheme is unstable.
The boundary cases require more than a root-modulus check. At , gives , while gives . The companion matrices have nontrivial Jordan blocks and solutions of the form . Their linear growth rules out a uniform stability bound. This mode occurs on even periodic grids, which are enough to disprove mesh-uniform stability at the endpoints.
Therefore the stable range is exactly
Within this range, second-order convergence additionally requires two appropriately accurate starting time levels. The unit-modulus parasitic root near does not decay, so poor initialization cannot be repaired by the scheme.

Pinned article: Introduction to the OurBigBook Project

Welcome to the OurBigBook Project! Our goal is to create the perfect publishing platform for STEM subjects, and get university-level students to write the best free STEM tutorials ever.
Everyone is welcome to create an account and play with the site: ourbigbook.com/go/register. We belive that students themselves can write amazing tutorials, but teachers are welcome too. You can write about anything you want, it doesn't have to be STEM or even educational. Silly test content is very welcome and you won't be penalized in any way. Just keep it legal!
We have two killer features:
  1. topics: topics group articles by different users with the same title, e.g. here is the topic for the "Fundamental Theorem of Calculus" ourbigbook.com/go/topic/fundamental-theorem-of-calculus
    Articles of different users are sorted by upvote within each article page. This feature is a bit like:
    • a Wikipedia where each user can have their own version of each article
    • a Q&A website like Stack Overflow, where multiple people can give their views on a given topic, and the best ones are sorted by upvote. Except you don't need to wait for someone to ask first, and any topic goes, no matter how narrow or broad
    This feature makes it possible for readers to find better explanations of any topic created by other writers. And it allows writers to create an explanation in a place that readers might actually find it.
    Figure 1.
    Screenshot of the "Derivative" topic page
    . View it live at: ourbigbook.com/go/topic/derivative
  2. local editing: you can store all your personal knowledge base content locally in a plaintext markup format that can be edited locally and published either:
    This way you can be sure that even if OurBigBook.com were to go down one day (which we have no plans to do as it is quite cheap to host!), your content will still be perfectly readable as a static site.
    Figure 5. . You can also edit articles on the Web editor without installing anything locally.
    Video 3.
    Edit locally and publish demo
    . Source. This shows editing OurBigBook Markup and publishing it using the Visual Studio Code extension.
  3. https://raw.githubusercontent.com/ourbigbook/ourbigbook-media/master/feature/x/hilbert-space-arrow.png
  4. Infinitely deep tables of contents:
    Figure 6.
    Dynamic article tree with infinitely deep table of contents
    .
    Descendant pages can also show up as toplevel e.g.: ourbigbook.com/cirosantilli/chordate-subclade
All our software is open source and hosted at: github.com/ourbigbook/ourbigbook
Further documentation can be found at: docs.ourbigbook.com
Feel free to reach our to us for any help or suggestions: docs.ourbigbook.com/#contact