Newton's second law takes its familiar form in an inertial frame. Axes fixed to a turning apparatus or to the Earth form a rotating reference frame. Extra inertial forces account for the acceleration of these coordinates. Their values depend on the chosen reference frame; physical interactions such as gravity, tension and contact forces must still be included separately.
Let the rotating origin have inertial acceleration , and let its axes have angular velocity . For any vector , the rotating-frame derivative formula is
Each rotating basis vector changes by , which proves this rule by expanding in that basis. Apply it twice to the position relative to the moving origin. With and measured in the rotating axes,
Consequently the equation in the rotating reference frame is
The additional terms are the translational inertial force, Coriolis force, Euler force and centrifugal force, respectively. The last two simplify when the angular velocity is constant: the Euler force vanishes, while the other rotation terms remain.
The centrifugal force points away from the rotation axis. If is the perpendicular displacement from that axis, then
For uniform rotation it has potential energy
A mass at rest relative to a turntable can therefore be described as having an inward tension or friction balancing its outward centrifugal force. In an inertial frame, the inward physical force instead produces the required centripetal acceleration. These are two descriptions of the same motion; one must not insert the rotating-frame outward term into the inertial equation as an additional physical interaction.
A rotating liquid gives a useful quantitative example. For a liquid in hydrostatic equilibrium relative to a vessel rotating uniformly about the vertical axis,
Along the free surface the pressure is constant, so and
The surface is a elliptic paraboloid. This is the balance of gravity and the centrifugal force in the rotating description. On the Earth, the same outward acceleration reduces effective gravity, most strongly at the equator, and contributes to the planet's equatorial bulge.
The Coriolis force depends on relative motion:
It is perpendicular to both and , vanishes for motion along the rotation axis, and reverses when the relative velocity reverses. The dot product gives
Thus the Coriolis force does no work in the rotating reference frame: it changes the direction of motion rather than directly changing the rotating-frame kinetic energy. For example, on a horizontal turntable rotating anticlockwise as viewed from above, an outward-moving slider has a clockwise Coriolis acceleration, whereas an inward-moving slider has an anticlockwise one. The deflection can be observed by comparing a laboratory camera with a camera rotating with the table.
For slow horizontal motion on the Earth at latitude , keep the vertical component of its angular velocity. In east-north coordinates the horizontal Coriolis acceleration is
It deflects motion to the right in the northern hemisphere and to the left in the southern hemisphere. In large-scale atmospheric and oceanic motion it can balance a horizontal pressure gradient, giving geostrophic balance. With upward, the steady horizontal equation without friction is
The resulting velocity runs along lines of equal pressure. This approximation requires rotation to dominate local inertial changes; it is inappropriate close to the equator where tends to zero.
The Foucault pendulum gives another terrestrial example. In the small-angle approximation, its horizontal coordinates satisfy
To first order in the small ratio , the oscillation plane precesses relative to the ground at angular rate : clockwise in the northern hemisphere, zero at the equator, and one revolution per sidereal day at a pole. The Coriolis force explains this changing orientation without requiring energy input. Together these examples show why inertial forces are useful whenever the apparatus or environment supplies naturally rotating coordinates.
Let be the upper- and lower-level populations and their degeneracy factors. At thermal equilibrium, the Boltzmann distribution gives
No degeneracy factors are supplied, so the numerical answers use equal degeneracy factors. Stating the ratio as upper population divided by lower population removes an otherwise arbitrary inversion.
(a) At ,
The two populations are nearly equal because the level separation is much smaller than the thermal energy .
(b) At ,
Almost every atom occupies the lower level. If the levels have unequal degeneracy factors, each boxed ratio must be multiplied by ; their individual values cannot be inferred from the paper.
For a fixed amount of a simple compressible system, write the internal energy as . Its exact differential is
Assuming the thermodynamic potential has continuous second partial derivatives, equality of its mixed partial derivatives yields the first Maxwell relation:
For the second Maxwell relation, use the Legendre transform , the enthalpy. Its natural variables are since
Thus and . Equality of the mixed partial derivatives now gives
(a) Treat the lake as a heat bath at fixed temperature and the block's heat capacity as constant. Its initial temperature is , and . Although the cooling is irreversible, entropy is a state function, so evaluate the block's change along an imagined reversible thermodynamic process:
The lake receives heat , and therefore
Adding the two contributions gives
The positive result is consistent with the Second law of thermodynamics for heat transfer across a finite temperature difference. The calculation uses exactly as printed in both the original PDF and the transcription; it does not replace the supplied value by a tabulated value for lead.
(b) The block starts and eventually finishes at the lake's temperature, so its net entropy change is approximately zero. Neglecting buoyancy, air resistance and the final immersion depth, the lost gravitational potential energy becomes internal energy in the lake after the motion and waves have dissipated. The lake remains at , giving
Temporary heating of the block or temporary storage in kinetic energy does not change this final energy and entropy balance once thermal equilibrium is restored.
Use the pipe-diameter convention for the Reynolds number, with mean velocity , density and dynamic viscosity :
The Reynolds number compares inertial and viscous effects in the fluid flow. A conventional estimate for the onset of turbulence in a pipe is , giving
Hence the usual onset estimate is . Using the also common transition criterion gives , whereas , used for established turbulence, gives . There is no universal sharp minimum: inlet disturbances and pipe conditions affect the transition from laminar flow, so the threshold convention must accompany the answer.
Interpret the applied pressure as a uniform increase of external hydrostatic pressure on all six faces, and approximate the rock by an isotropic material obeying linear elasticity. Taking tensile stress as positive, . By Hooke's law, the strain along any one axis is
To first order in the small strain, the fractional volume change is the sum of the three axial strains:
Thus the bulk modulus is . Using the specified Young's modulus, Poisson's ratio, and gives
The sign indicates contraction. This is the change relative to the unloaded reference state; simply maintaining a specimen already equilibrated at this same pressure would produce no further change.

There are unlisted articles, also show them or only show them.