For the linear Planck function profile, direct integration gives
in the optically thick limit. A sudden doubling of absorber abundance doubles optical depth at every physical height while initially leaving the temperature profile fixed. With , the same profile is , not . Thus
If temperature increases downward, and outgoing spectral irradiance decreases immediately because the effective emitting region moves upward into cooler gas. Subsequent thermal adjustment is outside this instantaneous comparison.
For the quadratic Planck function profile,
The optically thick limit and the instantaneous doubled-abundance result are therefore
The new coefficient is , since at fixed physical temperature. For positive , the outgoing spectral irradiance decreases. The factor differs from the linear case because the temperature-dependent source function curves with depth; doubling abundance does not mean holding its old functional coefficients fixed in the new optical-depth coordinate.
Photon gas 2026-10-13
A photon gas is a collection of photons described statistically as radiation. Here the equilibrium model is homogeneous, isotropic electromagnetic radiation in vacuum at temperature : each photon has energy , with momentum and frequency , and there are two independent transverse states of electromagnetic polarization. An absorbing cavity with walls at a common temperature provides a way to establish this thermal equilibrium. The bulk formulas assume cavity dimensions much larger than the typical wavelength , so the electromagnetic mode density in a box can replace individual cavity modes by a continuum. [ref]
The crucial constraint is whether photon emission and photon absorption, or other number-changing processes, can equilibrate the photon population. When they can, photon number is not an independently conserved quantity and the equilibrium photon chemical potential is . For each polarization and frequency, the mean occupation number then follows the Bose-Einstein distribution:
If number-changing processes are ineffective but number-conserving interactions redistribute energy, a constrained Bose-Einstein distribution can instead have with chemical potential fixed by the number constraint. Thus thermal equilibrium with respect to energy exchange alone does not establish . The zero value can also persist in an already prepared Planck photon distribution during suitable subsequent evolution; continual photon emission is not required to preserve it. [ref]
Combining with the two-polarization density of states, , gives the Planck photon distribution and the spectral photon energy density:
Here is the spectral radiance in Planck's law; is stored energy density per unit frequency, not outgoing power per area. Their different units are connected by the full-sphere solid angle and the speed of light . The Boltzmann constant is , and is the Planck constant. [ref]
The equilibrium equation of state is particularly simple:
The radiation constant is the same constant called in black-body radiation; is the Stefan-Boltzmann constant. An outline of the energy density calculation substitutes and uses . The radiation pressure follows because the angular average of the squared directional component of photon momentum is for isotropy; the thermodynamic derivation of blackbody radiation pressure supplies an independent route. These formulas describe the radiation contribution, not the cavity walls. The isotropic massless relation survives a different isotropic spectrum, whereas the coefficient in requires the zero-chemical potential Planck photon distribution.
For a computed example with stipulated , the photon energy density is and the radiation pressure is . The photon number density in the International System of Units is
Here is the Riemann zeta function. The mean photon energy differs from the energy at the peak of a spectral curve: counting photons and weighting them by energy emphasize different frequencies. The calculations use the exact International System of Units values of the Planck constant, Boltzmann constant and speed of light. [ref]
Figure 1.
Analytic photon gas spectra: counting photons and weighting their energies
. Original equilibrium model, not measured data. The left panel evaluates at stipulated per gigahertz. The right panel uses and plots the normalized spectral fractions and , each with total integral one on . Their different shapes show why a photon-counting spectrum and an energy density spectrum have different peaks. Details.
A motivating observation is the cosmic microwave background spectrum measured by the Far Infrared Absolute Spectrophotometer (FIRAS) aboard COBE. Its apparatus used a polarizing Michelson interferometer, with one input viewing a roughly seven-degree sky patch and the other an internal blackbody. Scanning mirrors changed the optical path length difference; heat-sensitive detectors recorded the varying power, and Fourier transform spectroscopy recovered the spectral difference. Operation outside the terrestrial atmosphere removed atmospheric emission and absorption, while shielding and cooling the optics in a helium cryostat suppressed the instrument's own radiation. [ref]
Absolute calibration came from moving an external blackbody into the sky aperture, filling the same beam used for the sky. This was an iron-loaded epoxy absorber shaped as a re-entrant cone. Repeated reflections made it a close approximation to a blackbody, while thermometers supplied its temperature. Mather and colleagues explicitly evaluated reflections, temperature gradients, radiation leaking through the material and leakage around its edge. These are limits on how faithfully the calibrator realizes thermal equilibrium radiation, rather than details that can be eliminated merely by calling it black. [ref]
During sky observations the internal blackbody temperature was adjusted to nearly null the spectral difference, reducing gain and drift errors. Fixsen and colleagues' 1996 analysis used calibrated spectra over wavenumbers to , about to . They separated the sky's spatially uniform component, its dipole and Galactic emission, and varied sky cuts and foreground templates as controls. The resulting cosmic microwave background spectrum agreed with a single Planck function, with reported RMS deviations below 50 parts per million of its peak brightness. This is a residual statistic over the analyzed spectrum, not a pointwise relative error bound at every frequency. [ref]
The observation motivates using a photon gas as a physical model rather than merely a formal counting exercise. Its interpretation has a clear boundary: agreement with Planck's law constrains departures from an equilibrium spectral shape within the calibrated band and foreground assumptions; it does not directly measure radiation pressure or entropy density of a photon gas. Nor does it establish that today's cosmic microwave background is continually re-equilibrating with matter. A previously thermal spectrum can retain its Planck function shape as expansion of the universe lowers every photon frequency in the same proportion. The usefulness of the model is that one measured spectral temperature, together with its equilibrium assumptions, predicts energy density, radiation pressure, photon number density and entropy density of a photon gas consistently.
Planck function Created 2026-09-28 Updated 2026-10-14
The Planck function is the equilibrium spectral specific intensity of a blackbody, given by Planck's law. Per unit wavelength it is
It can also be written per unit frequency, with under the corresponding change of variable.
Planck photon distribution Created 2026-09-24 Updated 2026-10-14
For photons in thermal equilibrium at temperature , Planck's law gives the photon number density per frequency interval. In terms of the Planck function, it is , hence
Planck's law 2026-10-13
Planck's law gives the spectral radiance of an ideal blackbody in thermal equilibrium at absolute temperature . It predicts how much power is carried in each small frequency or wavelength interval, per projected area and per solid angle. The whole curve is determined by : no material-specific parameter enters this ideal Planck function.
Writing for frequency in hertz and for wavelength in metres, the two forms of the Planck function are
Here is the Planck constant, the Boltzmann constant, and the speed of light in vacuum. Their exact values in the International System of Units are , , and . [ref]
The units matter: is measured in , whereas is measured in . Both are spectral radiance, rather than radiant exitance or energy density. To report per micrometre, multiply its per-metre value by ; a micrometre-wide interval is metres wide.
For a computed example, at and , the exponent is . Substitution into Planck's law gives , or per micrometre. At the same wavelength, the illustrative temperatures and give and in the latter units. These are ideal predictions for stipulated temperatures.
Figure 1. . The vertical axis is spectral radiance per micrometre, including the conversion from per metre. Increasing temperature raises the curve at every fixed wavelength and moves its marked peak toward shorter wavelengths. The peaks are approximately , , and for , , and , respectively; only to of each spectrum is shown. Details.
The key change of variables is . Corresponding positive intervals carry the same power, so and
Equal-width wavelength intervals have unequal widths in frequency; the factor compensates for this. Merely replacing the horizontal-axis labels of by does not produce . This explains the frequency and wavelength peaks of Planck's law.
A short derivation uses the Boltzmann distribution for a single electromagnetic mode with thermal energies , . Put . The geometric series gives and mean thermal energy . The electromagnetic mode density in a box, including both independent polarization of an electromagnetic wave states of a photon, is per volume per unit frequency. Multiplication gives spectral energy density ; isotropy gives . This counts thermal excitation energy, excluding zero-point energy. [ref]
Planck's law connects quantum mechanics to a measurable radiation curve. Its small- limit is the Rayleigh-Jeans law, ; its large- limit is the Wien approximation, . The suppression at high frequency makes the total energy density finite. Integrating the curve gives the Stefan–Boltzmann law, while locating its peak gives Wien's displacement law. Thus one formula predicts both the spectral shape and the total emission.
Radiative transfer source function Created 2026-10-06 Updated 2026-10-25
The radiative transfer source function is emission per unit extinction. If is emission per unit path length and is extinction per unit path length, and the transfer equation is . Under thermal absorption in local thermodynamic equilibrium it is the Planck function; for conservative coherent isotropic scattering it is the mean intensity.
Single-line greenhouse deficit Created 2026-10-25 Updated 2026-11-05
A single-line greenhouse deficit measures the reduction of outgoing thermal radiative flux by one isolated absorption line. Consider a plane-parallel atmosphere in local thermodynamic equilibrium, without scattering, above a blackbody surface. Let pressure increase from zero at the top to at the surface, and let the surface share the adjacent gas temperature .
To specify the angular approximation, use one effective upward direction cosine and a flux closure . Define the corresponding transmission . Integration by parts of the formal radiative transfer solution gives
For a sufficiently narrow absorption line centred at frequency , replace the Planck function and its temperature derivative across the line by their values at . With the line equivalent width
the outgoing radiative flux becomes
If temperature increases downward, . An atmospheric thermal inversion can invalidate that sign argument; absorption alone does not guarantee a positive deficit for every imposed thermal profile.
For constant absorber mass fraction , constant gravity and an opacity per absorber mass, assume and constant integrated strength . Then . In the optically thin limit for the specified direction,
This leading term is independent of the normalized shape of the absorption spectrum. The angular closure and abundance convention must accompany the coefficient; a full angular integration uses its own flux-weighted transmission.
For a Planck function expressed as spectral radiance per frequency interval,
is the Planck constant, the speed of light and the Boltzmann constant. Differentiating at fixed frequency gives
The proof uses and the chain rule. At low frequency, the multiplier tends to one, recovering the Rayleigh-Jeans law. At high frequency it grows approximately as : the same fractional temperature change has a larger fractional brightness effect on the declining spectral tail.
For an original example choose and . At , , so the first-order fractional residual is . At , , it is . Both spectra are exact blackbodies: this residual is a temperature mismatch, not evidence of a nonthermal spectrum. Fitting temperature before assessing remaining spectral residuals therefore removes a physically distinct degree of freedom. The figure divides by a fixed peak brightness rather than by the rapidly vanishing high-frequency tail.
Wien's displacement law Created 2026-09-24 Updated 2026-10-18
Wien's displacement law says that the wavelength maximizing the Planck function per unit wavelength, , moves inversely with absolute temperature:
Here is the Wien displacement constant. Heating an ideal blackbody therefore shifts this peak toward shorter wavelengths, while also increasing its emission at every fixed wavelength. The peak identifies where equal narrow wavelength intervals carry the most power; it is not a single emitted wavelength. Planck's law supplies the full curve, and the Stefan–Boltzmann law supplies its integral.
Specify the spectral coordinate before finding a peak. The frequency form of Wien's displacement law maximizes , which is spectral radiance per unit frequency. Its maximum is not . The frequency and wavelength spectral radiance conversion changes the density as well as the horizontal coordinate; the existing frequency and wavelength peaks of Planck's law give a complementary numerical comparison.
In his 11 December 1911 Nobel lecture, Wilhelm Wien explained the displacement principle through a thought experiment: compress black-body radiation between reflecting moving walls. Work against radiation pressure raises the energy density, while reflection changes each frequency by the Doppler effect. The Second law of thermodynamics connects the resulting spectrum to one at a higher temperature. This determines how the spectrum scales between temperatures, without determining its complete shape. The Wien approximation is a separate, restricted spectral formula.[ref]
Figure 1.
Wien's displacement law: spectral peaks and inverse temperature scaling
. Left: Planck function curves divided by their own maxima, for three stipulated temperatures. This normalization hides the increase in absolute spectral radiance. Right: the peak wavelength follows ; a tenfold rise in temperature divides the peak wavelength by ten. The curves are computed ideal blackbody predictions. Details.