Quasi-phase-matching compensates phase mismatch by deliberately modulating the nonlinear coefficient, rather than demanding that the material wavevectors themselves exactly match. In a periodically poled ferroelectric crystal, reversing domains changes the sign of the relevant second-order coefficient. Flipping it when the nonlinear interaction would begin to undo previous conversion restores constructive accumulation over many domains.
Write with . The amplitude integral contains phases , so a Fourier component is useful when
For first-order compensation, and each domain has width . This is twice the single-domain coherence length for the complete sign pattern, not a full period equal to .
For ideal equal-width domains switching between and , the resonant first Fourier coefficient has magnitude . The effective amplitude coefficient is therefore reduced by , and conversion intensity by , relative to a perfectly phase-matched uniform crystal using that same . Nevertheless, quasi-phase matching can permit a larger tensor coefficient or wavelengths and polarizations inaccessible to ordinary birefringent phase matching, more than compensating that idealized reduction.
Periodically poled lithium niobate is a practical example. Such gratings support second-harmonic and sum-frequency generation, difference-frequency conversion, optical parametric oscillation and pair generation. The period and temperature select the operating wavelengths; finite length gives a finite mismatch acceptance. Domain duty-cycle errors, nonuniform temperature, absorption and finite spatial or temporal overlap limit the result. Chirped or apodized patterns can reshape bandwidth, but do not make these physical limits disappear.
The optical Kerr effect gives an intensity-dependent refractive index, , in the simplest instantaneous isotropic model. A beam whose intensity varies transversely therefore writes a transverse index profile into the medium. Over length its nonlinear phase is approximately , with .
For a bright-centered beam, positive raises the index at the center and produces self-focusing; negative produces self-defocusing. The medium acts as an intensity-dependent lens. This is a transverse effect, distinct from temporal self-phase modulation broadening a pulse's spectrum, though both originate in the same nonlinear index. Kerr lenses can provide intensity-dependent mode selection in a laser, and a beam's index profile can guide or deflect a second beam through cross-phase modulation.
The competition with diffraction appears in a paraxial model,
In one transverse dimension, focusing can balance diffraction to support a bright spatial optical soliton under suitable boundary conditions. Transverse perturbations can also grow through modulational instability, breaking a broad beam into localized structures. In an ideal two-transverse-dimensional cubic model, sufficiently strong focusing permits collapse; the critical-power scale is proportional to , with its numerical coefficient depending on the convention and profile used.
A real medium does not develop an actual infinite intensity. Saturation, multiphoton absorption, ionization, nonparaxial propagation and damage can arrest or invalidate the simple model. Filament formation therefore requires more physics than inserting a real constant into a lens formula. The useful applications exploit a controllable index profile; the same positive feedback can be a serious limitation on transporting high-power beams.
spontaneous parametric down-conversion uses a second-order nonlinear polarization to convert pump energy into correlated signal and idler photons. With a classical undepleted pump, a single-mode interaction-picture model is
The creation term acts on the signal/idler vacuum, so no classical signal seed is required. The pump supplies the emitted energy; vacuum fluctuations are not an extra energy source. In the small-gain limit the SPDC pair state is
with normalization corrections understood at second order. More generally it is a two-mode squeezed vacuum with correlated pair numbers. A classical calculation with both generated fields exactly zero would miss the spontaneous start.
Efficient generation requires and approximate wave-vector matching . birefringence or a reciprocal grating vector in quasi-phase matching can compensate dispersion. In a continuum-mode treatment the pair amplitude includes
The pump spectrum constrains the sum frequency, while phase matching constrains the allowed frequency combinations and emission directions. type-I phase matching produces daughters in the same polarization class; type-II phase matching produces orthogonal ordinary/extraordinary classes. Correlation of pair numbers or orthogonal polarizations does not alone guarantee a polarization-entangled state in two chosen output paths.
One application is a heralded single-photon source: detect one partner and condition measurements on the other. Low gain suppresses multiple-pair contamination, whose probability begins at fourth order in the gain. Efficient collection and low detector noise matter. Spectral entanglement with an unresolved herald can leave the partner mixed; engineering or filtering the joint spectrum improves purity at a possible cost in brightness. Heralding does not make a photon appear in every pump pulse.
A second application is entangled-pair generation for quantum communication and tests of Bell inequalities. If the assignments and are indistinguishable except for polarization, their amplitudes can form . Walk-off, group delay or frequency labels can reveal which assignment occurred and destroy polarization interference. Their compensation is part of preparing the state, not merely an improvement in count rate.
A primary example pumped a 3-mm beta-barium-borate crystal with a argon-ion laser. Collecting the two intersections of its type-II emission cones selected paired output directions. Half-wave rotation and compensating birefringent crystals reduced temporal walk-off, and polarization analysers with avalanche photodiodes measured coincidence fringes. Varying analyser settings tested the correlations; accidentals, mode distinguishability and detector/collection assumptions limited interpretation. The reported visibility exceeded 97 percent and supported a Bell violation under the stated auxiliary assumptions, rather than a loophole-free claim.[ref]
Figure 1.
Original down-conversion and heralding schematic with an illustrative joint-frequency selection model
. Details.
Other uses include preparing interfering photons for quantum-information experiments, correlation-based imaging, and pair-based detector calibration. All rely on specified spatial and spectral modes and coincidence statistics. A pump-blocked background run, delayed-coincidence estimate, gain dependence and polarization/temporal-overlap scans distinguish correlated pairs from fluorescence, detector dark counts and accidental coincidences. The useful resource is the controlled joint quantum state, not simply two bright output beams.
For a local electric-dipole response of order , write
Its susceptibility is a rank- tensor. Initially it has components in three dimensions, before symmetries and frequency constraints are applied. nonlinear-susceptibility tensor symmetry involves several logically different restrictions.
Neumann's principle requires invariance under the material point group. For an operation ,
For inversion, , so . Thus all even orders vanish in a centrosymmetric material's local bulk electric-dipole response. In particular there, while is permitted. Surface symmetry breaking, an applied bias or nonlocal magnetic/quadrupole response lies outside that statement. A noncentrosymmetric crystal permits some second-order components, but other point-group operations can still eliminate a chosen component.
Intrinsic permutation symmetry follows from interchanging commuting input field factors, provided the associated frequency labels are interchanged too. At second order,
For equal input frequencies this makes the last two spatial indices symmetric, reducing 27 components to 18 before material symmetries. At unequal frequencies it does not identify the two index arrangements with the arguments held fixed. Reality of the time-domain polarization separately gives
causality imposes dispersion relations; neither arbitrary real coefficients nor full index symmetry should be inferred merely from the word lossless.
Kleinman symmetry is a stronger approximation far from relevant resonances when frequency dispersion can be neglected. A frequency-independent effective interaction energy makes its derivatives interchangeable, allowing full permutation of output and input spatial indices. At second order a fully symmetric rank-three tensor has components. Close to resonance or across a dispersive band, that reduction can fail even when absorption at the measured frequencies is small. The original analysis distinguishes high-resonance electronic response from strongly dispersive lattice mechanisms and identifies additional symmetry constraints on the former.[ref]
For an isotropic fourth-rank susceptibility,
If the relevant input slots are fully interchangeable, the coefficients coincide and . With distinct or mixed-sign frequency slots, frequency arguments must be followed and isotropy alone leaves the three displayed structures. These distinctions explain why tensor contractions, pump polarizations and operating frequencies must be specified before comparing effective self- and cross-phase coefficients.
A finite beam has an intensity gradient across its wavefront. In an instantaneous optical Kerr model, . A bright centre therefore sees a larger index for , accumulating more phase than the wings and producing self-focusing. Negative gives self-defocusing. For a short medium and Gaussian , expand the nonlinear phase near the axis:
Compare with the in-medium thin-lens phase , where . The Kerr lens has . This local quadratic fit describes the central lens, not the whole Gaussian phase or a guaranteed aberration-free focus.
Propagation combines diffraction with the nonlinear phase. Choose and a scalar paraxial envelope, giving
The diffraction length is of order , while the nonlinear length is . Their competition depends on total beam power as well as spot size. In two transverse dimensions, balancing them gives a critical power scale for positive ; the numerical constant requires a specified transverse profile and critical solution. In the ideal unsaturated cubic model, sufficiently strong focusing can collapse rather than form a stable beam. Real saturation, absorption, ionization or nonparaxial propagation can stop that ideal singularity; the appropriate mechanism depends on the material and pulse regime.
A broad focusing beam can also break into filaments. Perturb the uniform solution by real amplitude and phase components with transverse wave number . Linearization gives the transverse modulational instability rate
For positive , modes with grow. diffraction suppresses very fine perturbations. A finite beam's boundaries and available propagation length limit which filaments develop. The defocusing sign has no growing band in this simple instantaneous local model.
A spatial optical soliton instead has a profile whose nonlinear focusing balances diffraction. A one-transverse-dimensional cubic focusing model supports a stationary bright solution; the existence of that solution does not establish robust two-dimensional cubic self-trapping. A beam can also act on another finite beam through cross-phase modulation, producing an induced lens or steering it towards a high-index region. Unequal polarization response can rotate or reshape the profile. Temporal self-phase modulation is a related consequence of a time-dependent intensity, but should be distinguished from these transverse effects.
Figure 1.
Original Gaussian Kerr-lens phase and the focusing model's transverse instability band
. Details.
For an experimental check, vary power at fixed input waist and compare near- and far-field profiles with a low-power diffraction reference. Repeat with a second beam blocked to separate cross-phase modulation from self-action. Vary pulse duration or repetition rate to test thermal lensing against a prompt electronic response, and monitor transmission to distinguish nonlinear refraction from preferential absorption. A smaller output spot alone does not establish a soliton or a pure Kerr response.
For and , , so . Vacuum and coherent states have variance in either optical quadrature. quadrature squeezing means that some rotated optical quadrature has variance below this reference, with compensating noise elsewhere. A reduced second moment about zero is not the correct test when the field's mean is displaced.
For and , the quiet principal axis of the optical squeezed vacuum is at angle under the squeeze-operator convention used above, and
The pure Gaussian quantum state saturates the uncertainty product. Displacement moves its centre without changing its covariance ellipse; squeezed thermal states instead have a larger uncertainty product. The optical squeezed vacuum has zero mean field, even photon-number parity and mean occupation ; it need not have sub-Poissonian photon statistics. number squeezing and quadrature squeezing are different conditions.
Degenerate parametric amplification generates single-mode squeezing; a two-mode squeezed vacuum instead has correlated occupations and joint quadrature squeezing. Either individual mode of an ideal two-mode state is thermal after the other is ignored, not individually squeezed. balanced homodyne detection measures the noise versus local oscillator phase. Reference phase drift admixes the anti-squeezed optical quadrature, while electronic noise and detector imbalance need separate checks.
For an optical loss channel with efficiency and vacuum entering the unused port, optical squeezing degradation by loss gives
The linear-loss limit follows directly by writing the output field as with independent vacuum mode . Loss therefore places a floor under measured squeezing. Squeezed input can improve phase-sensitive measurements when aligned with the measured optical quadrature; it does not reduce every noise source or both conjugate uncertainties at once.
Figure 1.
Original optical-quadrature covariance ellipses and the effect of vacuum loss on squeezed variance
. Details.
A detector too slow to resolve a femtosecond field can measure its integrated nonlinear response instead. Split the pulse, delay one replica, overlap both in a thin phase-matched crystal, and select the sum-frequency signal. For negligible depletion and sufficiently broad phase matching, the cross-generated field is proportional to ; integrated signal gives the second-harmonic intensity autocorrelation
A noncollinear geometry can reject each replica's individual second harmonic. The optical response supplies the fast gate while the detector integrates slowly. Crystal thickness, group-velocity mismatch, spectral acceptance, beam overlap and delay calibration limit resolution.
For a Gaussian pulse specified by its intensity profile, the autocorrelation's full width at half maximum is times the intensity full width at half maximum. For a sech-squared intensity profile the ratio is about . These are model-dependent conversion factors. An intensity autocorrelation is symmetric in delay and loses phase information; different pulses can share it. An interferometric autocorrelation retains rapid carrier fringes but still does not generally reconstruct an arbitrary complex field uniquely.
frequency-resolved optical gating also resolves the gated signal's spectrum, giving a two-dimensional delay-frequency record. For second-harmonic frequency-resolved optical gating,
where is measured relative to the signal's carrier. An iterative retrieval seeks an envelope whose predicted record matches the measurement. Alternatively, polarization-gating frequency-resolved optical gating uses the optical Kerr effect to gate the probe by a delayed replica's intensity, with signal envelope proportional to . The original FROG work introduced nonlinear optical gating plus spectral resolution to characterize arbitrary femtosecond pulses.[ref]
Absolute wave phase and absolute time origin remain undetermined by these intensity records. The SHG record also cannot distinguish from , so its time-direction ambiguity remains. Retrieval agreement, an independently measured spectrum, adequate signal dynamic range and gate-response calibration are practical consistency checks. A pulse train that changes between shots can yield an averaged record that no single pulse faithfully represents. Thus nonlinear gating solves the detector-speed problem but does not remove inverse problem ambiguities or experimental limitations.
Figure 1.
Original nonlinear pulse-gating layout and a calculated Gaussian chirp example distinguishing autocorrelation from spectral gating
. Details.
An optical soliton maintains a localized profile because nonlinear refraction compensates linear spreading. A temporal optical soliton balances group velocity dispersion against self-phase modulation; a spatial optical soliton balances diffraction against self-focusing. The relevant coordinate and sign of nonlinearity must be specified.
For anomalous group velocity dispersion and positive , a fundamental temporal bright soliton is
The identity verifies both the width relation and propagation phase. Its dispersion length equals its nonlinear length . Bright pulses decay to zero background. dark solitons are intensity depressions on a nonzero background with a phase change across the dip; black dips reach zero intensity, while grey dips do not. For positive the corresponding temporal defocusing regime has normal group velocity dispersion.
A higher-order temporal soliton has soliton order equal to an integer greater than one for the special initial profile in normalized units. It breathes through compression and splitting/recombination, rather than keeping one fixed shape. Separated fundamental solitons can interact and acquire collision shifts. An arbitrary pulse with noninteger is not automatically a pure higher-order soliton; dispersive radiation can carry part of its energy.
In ideal one-dimensional cubic propagation, dispersion and nonlinearity support stable fundamental bright pulses. Loss, higher-order dispersion, delayed nonlinear response and finite bandwidth change real-fibre propagation. A one-dimensional spatial bright solution also does not guarantee stability against two-dimensional collapse. Profile preservation, finite-energy background conditions and robustness should be checked rather than inferred from any solitary-looking peak.
On a punctured neighborhood of the center, an essential singularity occurs exactly when infinitely many negative-power Laurent coefficients are nonzero. If all negative-power coefficients vanish, the singularity is removable; if finitely many are nonzero, the singularity is a pole. The punctured-neighborhood assumption matters: an annulus separated from its center cannot by itself classify the function there.
For an isolated pole of order , the Laurent coefficients must satisfy
Then the principal part of a Laurent series is a finite sum with lowest power . The classification at the center assumes analyticity on a punctured neighborhood , or an analytic continuation there. A Laurent expansion on an annulus with positive inner radius alone does not imply that the center is an isolated singularity.
For the odd extension, the cosine integral vanishes and the sine integral doubles. Integration by parts gives
The value at is zero by the odd function symmetry, or by the Maclaurin series of the sine. The transform is purely imaginary and odd.
The remaining terms give
This is the Laplace-Beltrami operator on the unit sphere. Taking the dot product with the unit radial vector instead would give ; the extra factor here comes from the position vector in the question.
The radial component of the curl in spherical coordinates is
It contains no , so cannot contribute. Substituting the tangential components gives
The mixed partial derivatives of smooth agree, so its terms cancel. Multiplication by , to take the dot product with the position vector , does not change this independence from .
Since , the gradient formula gives
The vector triple product identity gives . Adding the radial part yields
Here and . The harmonic conjugate and resulting polynomial are
Indeed and .
There are logarithmic branch points at and infinity. At zero, every local branch has , so division by gives a pole of order two at zero. Decay at infinity does not remove its branching: with , the function is , which changes branch when encircles zero.
The numerator is nonzero at and , so the finite singularities are a pole of order three at and a pole of order two at . The numerator degree exceeds the denominator degree by three, with leading behaviour . Hence infinity is a pole of order three.
The denominator factors as and neither factor cancels with the numerator. Thus there are simple poles at . At infinity the quotient tends to one and has a regular expansion in , so it has a removable singularity at infinity, with extended value one.

Pinned article: Introduction to the OurBigBook Project

Welcome to the OurBigBook Project! Our goal is to create the perfect publishing platform for STEM subjects, and get university-level students to write the best free STEM tutorials ever.
Everyone is welcome to create an account and play with the site: ourbigbook.com/go/register. We belive that students themselves can write amazing tutorials, but teachers are welcome too. You can write about anything you want, it doesn't have to be STEM or even educational. Silly test content is very welcome and you won't be penalized in any way. Just keep it legal!
We have two killer features:
  1. topics: topics group articles by different users with the same title, e.g. here is the topic for the "Fundamental Theorem of Calculus" ourbigbook.com/go/topic/fundamental-theorem-of-calculus
    Articles of different users are sorted by upvote within each article page. This feature is a bit like:
    • a Wikipedia where each user can have their own version of each article
    • a Q&A website like Stack Overflow, where multiple people can give their views on a given topic, and the best ones are sorted by upvote. Except you don't need to wait for someone to ask first, and any topic goes, no matter how narrow or broad
    This feature makes it possible for readers to find better explanations of any topic created by other writers. And it allows writers to create an explanation in a place that readers might actually find it.
    Figure 1.
    Screenshot of the "Derivative" topic page
    . View it live at: ourbigbook.com/go/topic/derivative
  2. local editing: you can store all your personal knowledge base content locally in a plaintext markup format that can be edited locally and published either:
    This way you can be sure that even if OurBigBook.com were to go down one day (which we have no plans to do as it is quite cheap to host!), your content will still be perfectly readable as a static site.
    Figure 5. . You can also edit articles on the Web editor without installing anything locally.
    Video 3.
    Edit locally and publish demo
    . Source. This shows editing OurBigBook Markup and publishing it using the Visual Studio Code extension.
  3. https://raw.githubusercontent.com/ourbigbook/ourbigbook-media/master/feature/x/hilbert-space-arrow.png
  4. Infinitely deep tables of contents:
    Figure 6.
    Dynamic article tree with infinitely deep table of contents
    .
    Descendant pages can also show up as toplevel e.g.: ourbigbook.com/cirosantilli/chordate-subclade
All our software is open source and hosted at: github.com/ourbigbook/ourbigbook
Further documentation can be found at: docs.ourbigbook.com
Feel free to reach our to us for any help or suggestions: docs.ourbigbook.com/#contact