At the rigid bed, the no-penetration boundary condition gives
The displaced surface is material, so taking the material derivative of gives the exact kinematic boundary condition for a free-surface graph:
With upward vertical coordinate , the gravitational potential per unit mass is . The Unsteady Bernoulli equation, evaluated on the surface with the prescribed pressure , gives
Here the spatially uniform time-dependent Bernoulli term has been absorbed into the velocity potential. The pressure is measured relative to the constant exterior pressure. This dynamic boundary condition uses the specified massless bending-cover model, with no ice inertia or tension.
The irrotational flow has a velocity potential with . The incompressible flow satisfies , hence the interior Laplace equation is
The ice supplies a boundary load through its bending stiffness; it does not alter this interior consequence of mass conservation.
Write . Multiplying the radius ordinary differential equation by gives an exact derivative:
The initial conditions therefore give the first integral
Choose the negative square root because the cavity starts accelerating inward. It cannot turn around while , since the squared speed is then strictly positive. Separating variables, with , proves the collapse time of a spherical cavity is
Hence
The improper integral is finite: its integrand behaves as near zero and as near one. The divergent inward speed as signals a singular endpoint of this ideal incompressible flow model; the finite collapse time follows within that model.
With zero internal pressure and negligible surface tension, pressure continuity sets the liquid-side boundary value to . Evaluating the pressure field of a pulsating sphere there gives
Thus the Rayleigh equation for an inviscid spherical bubble, together with its initial conditions, is
For , initially , so the physically relevant branch describes Rayleigh collapse of a spherical cavity.
Put . The partial derivative in the Unsteady Bernoulli equation is taken at fixed spatial position, so
At infinity the velocity vanishes and , giving . Substitution cancels the arbitrary and yields the pressure field of a pulsating sphere:
The distinction between at fixed and the material derivative along the moving boundary is essential here.
Use the spherical symmetry of the expansion, with fluid at rest at infinity and no superposed imposed flow. The radial Laplace equation gives
The moving sphere is a material boundary: its kinematic boundary condition is . Consequently , and the spherically symmetric incompressible radial flow has
Equivalently, its volumetric flow rate through any concentric sphere is , the rate of change of the enclosed volume.
For , the nonnegative amplitude is
Its first two derivatives are positive in this interval:
The graph is increasing and convex, starts with a horizontal tangent at the limiting value , and has a vertical asymptote at . Therefore the hydrostatic lower bound for a travelling-pressure response is
Because the paper assumes , this is an infimum, approached as , rather than an attained minimum. If the stationary limit is admitted, equality holds: the hydrostatic equilibrium condition is . Near resonance,
The divergence describes the linear model; sufficiently close to the small-disturbance assumptions fail. The lower bound and sketch refer to the travelling forced component, since adding free oscillations can change the instantaneous surface elevation.
Figure 1.
Subcritical travelling-wave amplitude rises from its hydrostatic lower bound and diverges at resonance
. Details.
The denominator of the travelling response vanishes at
For the positive speeds in the paper, a finite travelling response exists whenever . At , the dynamic condition would reduce to , which is impossible. The finite-depth dispersion relation of a surface gravity wave with wavenumber is . At , its phase speed equals : the moving pressure pattern drives a natural surface gravity wave at its own speed, producing resonance.
The restriction concerns a bounded travelling response. To distinguish this from existence of a solution of an initial value problem, set , , and . If
the linearized free-surface boundary conditions reduce to the forced harmonic oscillator
For example, if the forcing is switched on at from a flat surface with zero initial velocity, then, for ,
This satisfies and contains both free oscillations and the forced component. At a solution of the initial value problem still exists, but its particular solution contains
which grows linearly with time. Thus the ideal inviscid flow model predicts resonant growth rather than a finite constant amplitude. Additional free oscillations can set the initial conditions but cannot remove that secular growth.
A free point vortex is advected by the regular part of the velocity field at its position. Its own singular complex velocity must first be subtracted. The image expression therefore gives
Equivalently, is the complex conjugate of the boxed expression. This is the instantaneous velocity, evaluated with the current value of .
To see why mapping the image velocity alone would miss a term, expand the mapped physical singularity:
Thus the same point-vortex drift under a conformal map can be written
The finite term involving is part of the physical regular velocity field.
If with , direct substitution into the image expression gives
The bracket is strictly positive, and the result is real. Hence a positive line vortex initially moves horizontally to the right, a negative line vortex moves to the left, and the initial vertical velocity is zero. As , the leading term is the familiar drift of a point vortex above a straight wall.
The physical complex potential of a two-dimensional potential flow is . Applying the chain rule gives the complex velocity
The physical velocity is . A useful equivalent expression follows from
Factoring the image expression in the same way makes the terms cancel, leaving
This represents the physical line vortex at , an image line vortex of the same strength at , and image point vortices of opposite strength at and . All three image locations are outside the fluid region. Both boundary pieces inherit the constant streamfunction of the real axis in the mapped complex plane.
Take positive to mean counterclockwise circulation. A line vortex at has complex potential of a two-dimensional potential flow . The method of images imposes the no-penetration boundary condition on the real axis by placing an image line vortex of strength at . Thus
For real , the numerator and denominator have equal modulus, so the streamfunction is
The real axis is therefore a streamline. The image line vortex lies outside the mapped fluid region, while the complex velocity
decays as . This selects the flow due to the line vortex and the boundary, without superposing an imposed background velocity field.
The line vortex is mapped to
Its imaginary part is positive because lies in the fluid region. A conformal map preserves the circulation of the local line vortex, so its strength in the mapped complex plane is still .
The quadratic formula gives two algebraic possibilities. To select one consistent holomorphic square root, set
where each factor is the principal square root. Both arguments lie in the upper half-plane, so neither crosses its branch cut. This choice satisfies and at large in the upper half-plane. The required inverse function is
For , , this gives , whose modulus exceeds one. As varies continuously in the upper half-plane, this root cannot cross , since that would make real. Hence the selected root always lies in the fluid region. The other root is its reciprocal and lies inside the unit disk. Simply writing the principal square root of would not specify this branch correctly throughout the upper half-plane.
For ,
Both factors are positive in the fluid region, so its image is contained in the upper half-plane. The boundary correspondence is also explicit: on the upper unit semicircle, gives , while the real rays and map onto the rays and .
To prove the image is the whole upper half-plane, fix any . The equation is
Its roots have product one. Neither root can have unit modulus, since that would make real. Exactly one root therefore has modulus greater than one. For that root the formula for forces , so it belongs to the fluid region. Moreover, if , then
Two distinct roots in the fluid region would require , impossible when both moduli exceed one. Thus the Joukowski map of the upper exterior of a unit disk is a bijection from the fluid region onto the upper half-plane.
The Joukowski map is a holomorphic function for , with
A holomorphic function is a local conformal map wherever its derivative is nonzero. Hence the two finite nonzero critical points are
They lie on the boundary of the fluid region. At the displayed formula has a pole and is undefined as a map to the finite complex plane; zero is outside the fluid region. Thus is locally conformal everywhere in the fluid.
Since , the denominator in
is positive. The positive root of is
The other root is negative, so the horizontal force points in the positive direction for , vanishes at , and points in the negative direction for . In particular, the nearby line source pulls the cylinder towards itself as , while at large the horizontal force is .
Let denote the force per unit length exerted by the fluid on the cylinder, and let be the constant mass density. For a counterclockwise contour around the unit circle, the Blasius force theorem gives
An efficient use of the residue theorem finds the sum of the enclosed residues by subtracting the external pole at from the sum of all finite residues. At large ,
The sum of all finite residues of is therefore . At , write , with a holomorphic function near . Then
Thus
Using and gives
The vanishing vertical force also follows from reflection symmetry about the real axis. This force on a unit cylinder due to a uniform flow and an external source uses the counterclockwise orientation in the Blasius force theorem to fix the sign of the horizontal force.
Use for the complex potential of a two-dimensional potential flow, so its complex velocity is . The incident uniform flow and line source have
The coefficient of the complex logarithm is one because a line source of strength has complex potential of a two-dimensional potential flow , and here . Applying the Milne-Thomson circle theorem to the unit circle gives
Since , locally consistent branches of the complex logarithm give
Changes of branch only alter the constant in a local expression; is single valued away from its singularities. The added terms represent a two-dimensional potential doublet at the origin, an image line source at , and a compensating line sink at the origin. The image line source and line sink have equal and opposite strengths, so no net volume flux enters the cylinder.
On , the Milne-Thomson circle theorem makes up to a constant. Consequently the streamfunction is constant there, establishing the no-penetration boundary condition. All line source strengths are real, and the two-dimensional potential doublet has zero circulation, so the circulation around the cylinder is zero. There is no additional line vortex term.
Adopt the streamfunction convention , . Integrating the first component of the velocity field in gives . The second component then requires . Thus, omitting an arbitrary function of time,
At a fixed instant, the streamlines are the connected curves . To classify this quadratic form, introduce the invertible scaled and rotated coordinates
Then
For , both coefficients are positive. Every therefore gives an ellipse, and is the stagnation point at the origin. For , the quadratic form is an indefinite quadratic form: each gives a hyperbola. The level consists of the straight separatrices
whose rays approach or leave the origin; the origin itself is a stagnation point. At the transition , , so the nonstationary streamlines are parallel straight lines and is a line of stagnation points. These are instantaneous streamlines; the time dependence means that they need not coincide with pathlines.
Figure 1.
Instantaneous elliptical and hyperbolic streamlines at the same positive time
. Details.
For a planar incompressible flow, the divergence of the velocity field must vanish. Here
Equivalently, the Jacobian determinant of the deformation map is
so every material area is preserved. However, the out-of-plane vorticity is
Since , this vorticity never vanishes. The motion is an incompressible flow but is not an irrotational flow; its local spin is clockwise.

There are unlisted articles, also show them or only show them.