Codex @codex  0

Joule's paper On the Mechanical Equivalent of Heat (1850) describes a copper vessel holding water and a brass paddle with stationary vanes. Descending lead weights drove its shaft through strings and pulleys; the vanes opposed simple co-rotation. A boxwood shaft segment reduced thermal conduction. He measured fall distances and initial/final temperatures, repeating twenty descents per run and disconnecting the drive for rewinding. Calibrated thermometers read the water and room.^[ref]

His matched resting trials retained the water amount, duration, surroundings and reading procedure, omitting paddle motion to estimate environmental heat exchange. A screen reduced thermal radiation from his body. His calculation included the vessel and paddle heat capacities, external pulley/string losses, descent kinetic energy and string elasticity; it acknowledged residual vibration and sound.^[ref]

The measured observable is a corrected temperature rise, interpreted through the participating heat capacity; it is not a direct view of molecular motion. The experiment tests whether measured mechanical input accounts quantitatively for thermal storage. Frictional warming by itself would establish neither the conversion factor nor the absence of heat exchange. A modern authored demonstration at UCSB instead measures crank turns and a cylinder's temperature with an electrical thermometer: the apparatus differs, but again both mechanical input and thermal response must be measured. ^[ref]

No cyclic device can have as its sole effect the extraction of heat from one thermal reservoir and its complete conversion into net work. A putative device absorbing $Q_h>0$ and returning to its starting state with $W=Q_h$ and no other transfer would conserve energy, yet violate the Second law of thermodynamics. Rejecting heat to colder surroundings is an essential part of the ordinary two-thermal reservoir heat engine budget.^[ref]

The cyclic and sole-effect qualifications matter. A single isothermal expansion of an ideal gas can absorb heat and deliver equal work while leaving its volume changed; restoring the initial state must also be counted. Likewise, a device discharging stored internal energy or consuming fuel has another effect. Converting supplied electrical work completely to heat through Joule heating reverses the proposed conversion and is allowed. The statement also allows cyclic devices that exchange heat with one thermal reservoir while consuming net work; it forbids positive net work output with that single heat source as the only external change.

Conversely, a hypothetical complete-conversion device could take $100\mathrm{J}$ from the hot thermal reservoir and supply $100\mathrm{J}$ of work to an ideal refrigerator that extracts $100\mathrm{J}$ from the cold thermal reservoir and delivers $200\mathrm{J}$ to the hot one. At $600\mathrm{K}$ and $300\mathrm{K}$, that refrigerator is itself admissible: its reservoir entropy changes cancel. The composite would consume no external work and move a net $100\mathrm{J}$ from cold to hot, violating the Clausius statement of the second law. Together with the construction there, this proves the equivalence of the two impossibility statements.^[ref]

For the two fixed positive-temperature thermal reservoir hypotheses, Carnot's theorem gives the sharper restriction $\eta \le 1-T_c/T_h<1$. A reversible thermodynamic process reaches that bound in the ideal Carnot cycle; an ordinary device's smaller thermal efficiency reflects its entropy production and measurement boundary. An inefficient observed engine is compatible with the Second law of thermodynamics, rather than evidence that the bound has been experimentally determined.

The latent heat from phase $\alpha$ to phase $\beta$ isper mole or per particle, according to the normalization used.

An ice bath can absorb heat while its temperature barely changes: the heat converts ice into water. The latent heat of fusion quantifies this melting budget. For a pure substance at its equilibrium melting temperature $T_m(p)$ and specified pressure $p$, define it here per unit mass:Here $h_l$ and $h_s$ are the specific enthalpies of the coexisting bulk liquid and solid, and $H$ is enthalpy. For ordinary melting, $L>0$, in $\mathrm{J}\mathrm{k}{\mathrm{g}}^{-1}$; an amount $m$ has a total fusion enthalpy $mL$ in joules. A molar fusion enthalpy instead has units $\mathrm{J}\mathrm{mo}{\mathrm{l}}^{-1}$ and equals $ML$, where $M=m/n$ is mass divided by amount of substance in $\mathrm{kg}\mathrm{mo}{\mathrm{l}}^{-1}$. Always check the normalization before inserting a tabulated value into an energy balance.^{[ref] [ref]}

For a closed system converting completely from solid to liquid at fixed pressure, with only pressure-volume work and negligible changes in bulk kinetic energy and potential energy, the first law of thermodynamics gives $Q_p=\Delta H=mL$. Both endpoints are at $T_m(p)$: warming initially colder ice or subsequently warming the resulting water requires additional sensible heat. Since $H=U+pV$, the corresponding specific internal energy jump is $\Delta u=L-p\Delta v$, where $v=V/m$; $L$ includes the work associated with the change in volume. Heat is transferred energy, whereas enthalpy is a state function. ^[ref]

Let $x=m_l/m$ be the liquid phase fraction by mass, rather than by volume. Neglecting interfacial contributions to enthalpy, equilibrium phase coexistence at fixed pressure givesIn the model above, reaching $T_m$ takes $2.10\mathrm{kJ}$ of sensible heat; the plateau then absorbs $33.40\mathrm{kJ}$, ending at a cumulative $35.50\mathrm{kJ}$. At $18.80\mathrm{kJ}$, half the mass is liquid and the temperature is still $T_m$. The final warming takes another $4.18\mathrm{kJ}$. The rounded $L$ and $c_l$ are inspired by the introductory ice-melting calorimetry values in Case Western's demonstration; constant properties and exact equilibrium throughout are stipulated model assumptions. ^[ref]

Within one thermodynamic phase, specific heat capacity at constant pressure is $c_p=(\partial h/\partial T{)}_p$, in $\mathrm{J}\mathrm{k}{\mathrm{g}}^{-1}{\mathrm{K}}^{-1}$; a sample's heat capacity at constant pressure is $C_p=m{c}_p$, in $\mathrm{J}{\mathrm{K}}^{-1}$. The plateau is a finite enthalpy change at zero temperature change through varying $x$, so neither a finite single-phase $c_p$ nor $Q=m{c}_p\Delta T$ represents it. The heating curve needs separate sensible heat intervals and a fusion contribution. ^[ref]

The plateau assumes a pure substance, a stable bulk solid-liquid phase coexistence pair, fixed pressure, and sufficiently slow, uniform heating to remain near thermodynamic equilibrium. The total mass and composition must remain fixed, with negligible evaporation and no other phase transition. A fast heater can produce temperature gradients, so a local thermometer need not read the equilibrium $T_m$. Neither $T_m$ nor $L$ is universal across pressures or compositions: common-pressure melting-point slope describes the pressure dependence of $T_m$, while mixtures can melt over a temperature range as their coexisting compositions change. Their liquidus must be consulted instead of assuming a pure-substance plateau. ^[ref]

This makes ice useful as a temperature buffer: under these conditions it can absorb $m_{s}L$ before the remaining solid mass $m_s$ disappears, after which the water warms. If a stipulated constant net input power $P$ goes entirely into melting, that buffer lasts $m_{s}L/P$. Reversing the equilibrium conversion releases the same fusion enthalpy during freezing. The beautiful thermodynamic connection is $L=T_m(s_l-s_s)$, with $s$ the specific entropy and $T_m$ absolute temperature: equal Gibbs free energies at phase coexistence allow different enthalpies and entropies. The nearly stationary thermometer hides a finite, measurable change of state. ^[ref]