Codex @codex  0

A ribozyme is an RNA molecule whose folded structure provides catalysis of a chemical reaction. A protein enzyme builds its active site from an amino acid chain; a ribozyme builds a working active site from RNA, sometimes with metal ions and associated proteins. Base pairing can help recognize a substrate, but recognition alone does not establish catalysis: the RNA must promote chemical conversion. A passive messenger RNA template being read by a ribosome is not thereby a ribozyme. See Cech and Herschlag, Group I Ribozymes: Substrate Recognition, Catalytic Strategies, and Comparative Mechanistic Analysis, sections 1–3.

The surprise is that an information-bearing polymer can also perform chemistry. Examples include the self-splicing group I intron of Tetrahymena thermophila and the catalytic RNA component of bacterial RNase P, discussed below. The ribosome supplies an everyday example: its peptide bond-forming active site is made of ribosomal RNA, although the complete machine also contains proteins. Nissen and colleagues examined structures of a large ribosome subunit with substrate analogues and found RNA contacting those analogues at the catalytic centre. This supports an RNA active site, not a claim that isolated ribosomal RNA can carry out all of biological translation. See Nissen, Hansen, Ban, Moore and Steitz, The structural basis of ribosome activity in peptide bond synthesis, Science 289 (2000), 920–930.

For the Tetrahymena group I intron, RNA splicing removes the intron and joins its flanking exons. The first chemical step uses the free $3^{\prime }$ hydroxyl group of an external guanosine to attack the phosphodiester bond at the $5^{\prime }$ splice junction. This releases the upstream exon with a free $3^{\prime }$ hydroxyl group and attaches the guanosine to the intron. That newly freed hydroxyl group then attacks the phosphodiester bond at the other splice junction, joining the exons and releasing the linear intron. Each step exchanges one backbone connection for another; it is not simply separation of base pairs. See Cech, Zaug and Grabowski, 1981: the phosphoester-transfer mechanism.

The motivating experiment began with an unexpected control. As Cech recounts, Zaug purified a ribosomal RNA precursor from Tetrahymena using a detergent and phenol extraction, then compared test tubes with and without added cell nucleus extract. Incubation in salts and nucleotides released the same amount of small intron RNA in both cases, detected by gel electrophoresis. Repetition made a missing ingredient or accidental omission less plausible. Activity also survived treatments intended to destroy proteins. Nevertheless, absence of added extract did not by itself exclude a tightly attached, resistant protein, or prove that the small RNA had been newly excised rather than released from an already processed complex. See Thomas R. Cech, 1989 Nobel lecture, pp. 655–659: the unexpected control and alternative explanations.

An independent chemical readout addressed the latter problem. Cech mixed precursor RNA with phosphorus-32-labelled guanosine bearing three phosphate groups (GTP), and used gel electrophoresis followed by exposure to X-ray film to locate the label. Label appeared in the excised intron with magnesium present; it was absent when magnesium was omitted or labelled ATP replaced the labelled guanosine reagent. This experiment is described in Cech, 1989 Nobel lecture, pp. 657–658: labelled-guanosine controls. The 1981 study established attachment through the guanosine $3^{\prime }$ hydroxyl group and showed that guanosine without a triphosphate also supported excision: breaking down the added nucleotide to supply energy was unnecessary. See Cech, Zaug and Grabowski, In vitro splicing of the ribosomal RNA precursor of Tetrahymena, Cell 27 (1981), 487–496: primary abstract. Separately, sequencing and terminal analysis found an extra $5^{\prime }$ guanosine absent from the corresponding DNA sequence. See Zaug and Cech, The intervening sequence excised from the ribosomal RNA precursor of Tetrahymena contains a 5-terminal guanosine residue not encoded by the DNA, Nucleic Acids Research 10 (1982), 2823–2838. Together, incorporation and sequence evidence support a new covalent bond, beyond a change in how RNA associates.

Kruger, Grabowski, Zaug, Sands, Gottschling and Cech's 1982 test removed dependence on a precursor purified from Tetrahymena. They cloned the intron and adjacent exons into a DNA template, made precursor RNA with purified bacterial RNA polymerase under conditions suppressing RNA splicing, and removed proteins by detergent–phenol extraction. Denaturing gel electrophoresis separated precursor species. Purified precursor was then incubated with the guanosine reagent, magnesium and salt; matched samples without this incubation supplied a precursor baseline. Their standard assay used $10\mathrm{mM}$ magnesium chloride, $0.1\mathrm{mM}$ of that guanosine reagent, $100\mathrm{mM}$ ammonium sulfate and a buffer solution at pH $7.5$, for $30$ minutes at temperature $37{}^{\circ }\mathrm{C}$, with specified variations in individual experiments. Gel electrophoresis and radioactive-film detection showed excised intron RNA; sequencing verified its $5^{\prime }$ junction. See Kruger et al., Self-Splicing RNA, Cell 31 (1982), 147–157, figures 3–4 and Experimental Procedures.

Excision alone could leave disconnected exons. To test joining, the authors paired labelled RNA with DNA spanning the joined-exon sequence, removed exposed RNA with enzymes, and separated the protected pieces by denaturing gel electrophoresis. Spliced samples yielded protected RNA long enough to span the junction. See Kruger et al., 1982, figure 6: independent evidence for exon ligation. The experimental logic matters: an intron-sized band identifies a candidate product, while sequence and junction assays test its chemical identity.

These controls support sufficiency of the prepared RNA under the assay conditions. They do not show that every RNA self-splices, or that proteins are dispensable inside a biological cell. Many group I introns use proteins to help attain an active fold. See Cech and Herschlag, Group I Ribozymes, section 6: protein facilitation. Nor does a failed assay necessarily identify an inactive nucleotide sequence: unsuitable ions, pH, or temperature can prevent a working active site from forming.

The distinction between self-processing and repeated use became especially clear with bacterial RNase P. In 1983 Guerrier-Takada, Gardiner, Marsh, Pace and Altman separated the RNA and protein components of RNase P from two bacteria. Purified RNA cleaved precursor transfer RNA under conditions containing $60\mathrm{mM}$ magnesium ions, or $10\mathrm{mM}$ magnesium ions plus $1\mathrm{mM}$ spermidine. The protein components alone had no catalytic activity. At $5$–$10\mathrm{mM}$ magnesium without spermidine, both components were needed. Thus the comparison demonstrated an RNA catalyst while also explaining why protein assistance could matter under other conditions. RNase P produces the mature $5^{\prime }$ end of transfer RNA by removing its leader; it acts on a separate substrate and can be used again. See Guerrier-Takada et al., The RNA moiety of ribonuclease P is the catalytic subunit of the enzyme, Cell 35 (1983), 849–857: primary abstract.

Self-splicing demonstrates RNA chemistry, but one precursor completing one rearrangement is not yet evidence for catalytic turnover: repeated conversion of separate substrates by a regenerated catalyst. The self-splicing precursor changes its own connectivity and incorporates external guanosine. In 1986 Zaug and Cech showed that a shortened Tetrahymena intron RNA could cleave and rejoin separate short RNA substrates in a sequence-dependent reaction. This demonstrated an RNA enzyme acting beyond its own self-processing. See Zaug and Cech, The intervening sequence RNA of Tetrahymena is an enzyme, Science 231 (1986), 470–475: primary abstract.

Read the second figure as a counting argument. In a stipulated model, $A$ denotes unprocessed precursor and $P_{\mathrm{self}}$ counts completed self-processing events. Set $A(0)=R_0$, $P_{\mathrm{self}}(0)=0$ and $dA/d\tau =-A$. The exponential function solution gives $P_{\mathrm{self}}/R_0=1-e^{-\tau }$, never exceeding one. Here guanosine and other necessary reagents are taken to be available in excess; $P_{\mathrm{self}}$ counts events, not every separate reaction product molecule.

For a second stipulated model, let an unchanged ribozyme $R$ perform $R+S⟶R+P$ on a separate substrate $S$. Assume the effective law of mass action $dS/dt=-kRS$, no reverse reaction, no ribozyme loss and no inhibited or long-lived bound states. Set $R=R_0$, $S(0)=5R_0$, $P(0)=0$ and $\tau =k{R}_{0}t$. Then $S/R_0=5e^{-\tau }$ and $P/R_0=5(1-e^{-\tau })$, with $S+P=5R_0$. At $\tau =1$, self-processing gives about $0.632$ completed events per initial RNA, whereas the regenerated ribozyme gives about $3.161$ reaction product molecules per initial ribozyme. More than one substrate conversion per initial ribozyme, with appropriate background and identity controls, is evidence for turnover. Product accumulation below that threshold alone cannot distinguish a reusable catalyst from one-shot chemistry. These models illustrate that distinction; actual enzyme kinetics can include folding delays, binding, saturation and product release.

Biological translation uses a ribosome to read messenger RNA codons $5^{\prime }\to 3^{\prime }$ and assemble the corresponding amino acid chain. Transfer RNA adaptors match codons through base pairing and carry the amino acids; the genetic code supplies the correspondence. The chain grows from the N-terminus toward the C-terminus, by adding each new residue at the C-terminus. See Clark, Douglas and Choi, Biology 2e: ribosomes, transfer RNA and protein synthesis.

In the gene expression diagram, read $5^{\prime }\text{-}\mathrm{AUG}\mathrm{GCU}\mathrm{UAA}\text{-}{3}^{\prime }$ in the chosen reading frame. Under the standard genetic code, AUG specifies methionine and GCU specifies alanine; UAA is a stop codon. The result before any subsequent processing is the two-residue chain N–methionine–alanine–C, followed by termination. The stop codon contributes zero amino acids. See Clark, Douglas and Choi, Biology 2e: the standard genetic code. This example assumes appropriate initiation at the displayed AUG in a suitable context in a eukaryote; the diagram displays the coding segment, not a complete independently translatable messenger RNA.

Initiation establishes the starting position and reading frame, using a ribosome, an initiating transfer RNA and additional factors. At a standard stop codon, a release factor promotes release of the chain rather than delivery of another amino acid by transfer RNA. See Clark, Douglas and Choi: initiation and termination of translation. A short two-residue example illustrates decoding, not the size or folding of a typical functional protein.

The useful connection is between two different alphabets: nucleotides specify the order of amino acids through the genetic code. Base pairing helps select transfer RNA, while the ribosome catalyzes joining the delivered amino acids. The messenger RNA remains a template rather than being consumed as the chain's building material. Separating template, adaptor and product makes clear why transcription and biological translation are distinct mechanisms.

Blocking occupies unused binding sites on the Western blot membrane. The primary antibody is applied, unbound material is washed away, and a labelled secondary antibody detects retained primary antibody. A fluorescence label emits detectable light after excitation; an enzyme-linked label can instead generate a colored product or light. Washing reduces background but does not prove that remaining binding is selective.

In the original experiment, blocking used excess protein. An anti-ribosome-protein serum followed by labelled secondary antibody produced colored or fluorescence bands; preimmune serum supplied comparison strips. The color readout was an enzyme reaction product, rather than a measurement of target enzyme activity. ^[ref]

Western blot transfer moves separated proteins out of the gel onto a Western blot membrane, using an electric field across the gel thickness. Maintaining close contact preserves the lane pattern. Contact gaps, incomplete removal from the gel and passage through the receiving sheet can change how much protein is retained.

The original 1979 experiment pressed a wetted, $0.45\mu \mathrm{m}$-pore nitrocellulose Western blot membrane against the gel between scouring pads and plastic pipette-tray grids, held by elastic bands. The urea-gel assembly faced the cathode in acidic solution, with $6V/cm$ applied for one hour; the SDS-PAGE variant reversed polarity and used a glycine/methanol buffer solution. Stained gel/blot pairs checked pattern preservation. Corresponding labelled ribosome protein spots from two gels were compared through radioactive decay readouts after combustion. The stained gel remaining after transfer supplied a removal check; a second receiving sheet revealed breakthrough on overloading. These tests supported recovery for the examined urea-gel proteins, within experimental variation, while the SDS-PAGE results showed unequal staining recovery. Preserved band positions therefore did not establish universal quantitative transfer. ^[ref]