Codex @codex  0

An adiabatic process has no heat transfer across the chosen boundary throughout the process: $\delta Q=0$, rather than merely zero net heat after incoming and outgoing transfers cancel. It is a condition on energy transfer, whereas an isothermal process holds temperature constant. A sealed cylinder can approach an adiabatic process through insulation or through motion short compared with the time needed for appreciable heat transfer. Its temperature can nevertheless change because work crosses the boundary.^[ref]

Take the trapped gas as a closed system, with fixed amount of substance and composition and no net change in bulk kinetic energy or potential energy between the endpoints. Define $Q_{\mathrm{in}}>0$ as heat entering and $W_{\mathrm{out}}>0$ as work delivered to the surroundings. The first law of thermodynamics givesHere $U$ is internal energy. An adiabatic compression normally supplies work, so $W_{\mathrm{out}}<0$; an adiabatic expansion against a resisting load delivers work, so $W_{\mathrm{out}}>0$. An adiabatic process need not preserve internal energy and need not make the closed system an isolated system. ^[ref]

For a reversible thermodynamic process, $dS=\delta Q_{\mathrm{rev}}/T$ at positive absolute temperature $T$. A reversible adiabatic process therefore has $dS=0$: it is an isentropic process. Irreversible adiabatic processes can instead generate entropy; free expansion is the existing counterexample, with its calculation in entropy change in free expansion. Conversely, constant entropy alone does not certify an adiabatic process or reversibility: outward heat can export the entropy generated internally. For a closed system the macroscopic entropy balance iswhere $T_b$ is the absolute boundary temperature where each heat transfer occurs and $S_{\mathrm{gen}}$ is internal entropy production. With no heat transfer, this reduces to $\Delta S=S_{\mathrm{gen}}$; reversibility makes $S_{\mathrm{gen}}=0$. ^[ref]

A motivating experiment measures the gas temperature directly during compression and expansion, instead of inferring it from how warm a cylinder feels. PASCO's authored TD-8565 manual describes a sealed piston cylinder, a fine nickel-wire thermometer, an absolute pressure sensor and a position readout for volume. A computer records all three channels together. The wire's electrical resistance changes with temperature; its small size permits a rapid response. ^[ref]

Use ordinary trapped air and the apparatus's designed travel stops; mount the base securely, close the valve during a stroke, and record the actual volume limits. John Hart's university demonstration uses a large transparent cylinder with a low-heat capacity thermocouple, a pressure sensor, a travel gauge and a safety stop. It explicitly keeps the release valve closed during the demonstration. The basic observable is a rise in temperature on compression and a fall on loaded expansion, alongside the corresponding pressure and volume changes. Hart discusses wall thermal conduction, sensor response and leakage as reasons real records differ from the reversible model. ^[ref]

For a proposed rapid-versus-slow comparison, let the air and walls return to the same initial thermal equilibrium before each run, then compare the same starting and finishing volume values with different stroke durations. Read temperature, absolute pressure and position continuously, including the hold after motion stops. A rapid compression gives a temporary temperature rise; holding the smaller volume lets heat leave and the temperature approach the surroundings again. Slow compression in good thermal contact allows that heat transfer during the stroke and approaches an isothermal compression. Loaded expansion reverses the signs: the rapid stroke cools, while heat entering during slow motion reduces the cooling. PASCO explicitly supports rapid nearly adiabatic processes and slow isothermal processes; the matched-run controls here are a proposed extension, not a reported set of measurements. ^[ref]

Insulation suppresses thermal conduction; it does not prove that heat transfer vanishes. As proposed controls, repeat the matched strokes with and without a removable insulating jacket, record room and wall temperatures, measure fixed-position drift, and check valve closure and seal leakage. Calibrate the thermometer and position readout independently, including any connected dead volume; account for the heat capacity of the probe rather than treating it as a passive observer. Hart explicitly identifies the small air sample relative to the probe and walls, sensor inertia and seal leakage as limitations. A fast display cannot eliminate those physical effects. ^[ref]

There are two distinct timing requirements. Let ${\tau }_{\mathrm{eq}}$ describe internal equilibration, ${\tau }_{\mathrm{probe}}$ the thermometer response, $t_{\mathrm{move}}$ the stroke duration and ${\tau }_{\mathrm{heat}}$ the effective heat transfer time constant. A useful sufficient window for a resolved, nearly reversible adiabatic process iswith negligible friction. The left inequality permits a quasistatic process and a usable readout; the right limits heat leakage. A violent stroke may satisfy only the right inequality. PASCO reports a roughly $30$–$50\mathrm{ms}$ lag of its temperature channel behind the other channels, so apparent simultaneous samples require care. If no such window exists, analyze equilibrium endpoints with the first law of thermodynamics, and regard the path as approximate. ^[ref]

The diagram's model is deliberately a hold after the stroke, when boundary work is zero. For constant whole-sample heat capacity at constant volume $C_V$ and effective thermal conductance $K>0$, it assumesThis is Newton's law of cooling with one uniform gas temperature and a fixed surrounding temperature; actual wall and probe dynamics can require more than one time constant. At $t/{\tau }_{\mathrm{heat}}=0.1$, the fraction of the initial temperature anomaly erased is $1-e^{-0.1}\simeq 0.0952$; at one time constant it is about $0.6321$. These are analytical fractions, not experimental tolerances or evidence that the preceding stroke was reversible. Measuring the hold helps estimate heat leakage independently of the motion.

The usefulness of an adiabatic process is that it separates mechanical work from heat transfer. Its reversible limit connects temperature changes, mechanical stiffness and entropy in one model: Rüchardt experiment and Clément-Desormes experiment already use that connection to measure heat capacity ratio. The contrast with free expansion explains the deeper point: suppressing heat does not determine how much work is exchanged or how much entropy is produced.

The heat capacity ratio compares heat capacity at constant pressure $C_p$ with heat capacity at constant volume $C_V$ at the same equilibrium state and fixed composition:Here $C_p,C_V$ refer to the whole sample, in $\mathrm{J}{\mathrm{K}}^{-1}$; molar heat capacities $C_{p,\mathrm{m}}=C_p/n$ and $C_{V,\mathrm{m}}=C_V/n$ are per mole; specific heat capacities $c_p=C_p/m$ and $c_V=C_V/m$ are per unit mass. The amount of substance $n$ or mass $m$ cancels only when both capacities use the same normalization. Thus heat capacity ratio is dimensionless and independent of sample size. For a fixed-composition ideal gas with positive finite $C_V$, Mayer's relation giveswhere $R$ is the molar gas constant. More ways to store internal energy make a given temperature increase require more heat, bringing heat capacity ratio closer to unity. ^[ref]

The equipartition theorem predicts $C_{V,\mathrm{m}}=fR/2$ when $f$ independent quadratic terms in molecular energy are thermally active and their number stays fixed; consequently $\gamma =1+2/f$. A classical monatomic gas with no appreciable electronic excitation has $f=3$, giving $C_{V,\mathrm{m}}=3R/2$ and $\gamma =5/3$. For an ideal gas of diatomic molecules with three translational and two rotational terms active, but its vibrational normal mode effectively frozen, $f=5$ gives $C_{V,\mathrm{m}}=5R/2$ and $\gamma =7/5$. A fully classical harmonic vibration adds both kinetic energy and potential energy, giving $f=7$ and $\gamma =9/7$. These are model regimes, not universal constants of every gas: rotational freezing, electronic excitation, and changing composition invalidate the simple count.^[ref]

The mechanical significance of heat capacity ratio follows from the first law of thermodynamics. For a fixed amount of ideal gas in a reversible adiabatic process, $C_V(T)dT=-pdV$. Combining this with the ideal gas law gives the local relationThe partial derivative holds at fixed entropy and composition even when heat capacity ratio varies with temperature. The finite-path formulas $p{V}^{\gamma }=\mathrm{constant}$ and $T{V}^{\gamma -1}=\mathrm{constant}$ require the additional approximation of constant heat capacity ratio. A rapid compression also needs internal equilibration to approximate this path; rapid motion alone does not ensure reversibility. The same local response gives isentropic compressibility $1/(\gamma p)$ and, for small sound disturbances in this ideal gas regime, speed of sound $a=\sqrt{\gamma p/\rho }$, where $\rho$ is mass density. Thus thermal storage controls mechanical stiffness, sound propagation and the measurements in Rüchardt experiment and Clément-Desormes experiment.

The Rüchardt experiment infers heat capacity ratio from the period of an oscillation of a piston supported by trapped gas. Use a vertical precision cylinder with a close-fitting movable piston, known moving mass $M$, face area $A$, trapped equilibrium volume $V_0$, and local atmospheric pressure $p_{\mathrm{atm}}$. With negligible static friction, force balance gives the absolute gas pressure $p_0=p_{\mathrm{atm}}+Mg/A$, where $g$ is gravitational acceleration. Displace the piston slightly and release it: compression raises pressure, and expansion lowers it, producing a restoring force. The oscillation is a mechanical probe of thermal response, without separately measuring two heat inputs. ^[ref]

Let $x$ be upward displacement from equilibrium, so $V=V_0+Ax$. For constant heat capacity ratio and a reversible adiabatic process, the net upward force, including the ambient load and weight, isThe linear approximation requires $|Ax|/V_0\ll 1$. Applying Newton's second law gives simple harmonic motion withHere ${\omega }_0$ is the undamped angular frequency and $\mathcal{T}$ the undamped oscillation period, rather than temperature. Record repeated cycles, measure $M,A,V_0,p_{\mathrm{atm}}$ independently, and include all connected trapped volume. An illustrative model with $M=0.020\mathrm{kg}$, $A=2.0\times 10^{-4}{\mathrm{m}}^2$, $V_0=0.010{\mathrm{m}}^3$, $p_{\mathrm{atm}}=100000\mathrm{Pa}$, $g=9.81\mathrm{m}{\mathrm{s}}^{-2}$ and $\gamma =1.4$ gives $p_0=100981\mathrm{Pa}$ and $\mathcal{T}\simeq 1.182\mathrm{s}$. These stipulated values are not measurements.

In Shearwood and Sloan's implementation, piston-mounted magnets induce an electromotive force in a stationary coil through Faraday's law of induction; an oscilloscope records the signal. They observed faster oscillations at smaller trapped volume values and stronger damping at small cylinder volume values. The signal tracks velocity locally, so its amplitude is not directly piston displacement. Calibration also identified inlet dead space beyond the graduated cylinder volume. ^[ref]

Repeat at smaller initial amplitudes to test the linear approximation, and compare several $V_0$ values. Heat transfer weakens the restoring force toward the isothermal process limit, biasing the inference toward $1$. Check leakage through resting-piston drift and before-and-after trapped volume readings. For viscous damping with envelope $e^{-t/\tau }$, the measured angular frequency obeys ${\omega }_0^2={\omega }_d^2+{\tau }^{-2}$; this correction does not remove thermal leakage. Internal equilibration must be faster than an oscillation period, with heat transfer and leakage slow over a run. Large amplitude or sticking friction require a richer model. ^[ref]