Quantum oscillation Created 2026-10-18 Updated 2026-11-05
A quantum oscillation is an oscillatory contribution to a metal's response as a magnetic field moves quantized orbital levels past the Fermi energy. For a closed extremal Fermi surface cross-section of wavevector-space area , Onsager quantization gives inverse-field period . Oscillations of magnetization and electrical resistivity are respectively the de Haas-van Alphen effect and Shubnikov-de Haas effect. Low temperature and long quantum lifetime are needed so thermal smearing and disorder do not wash out the Landau levels.
Quantum XX chain 2026-10-20
The spin-one-half quantum XX chain has equal nearest-neighbour transverse exchange. Its continuous spin rotation symmetry conserves total longitudinal magnetization. The Jordan–Wigner transformation maps it to number-conserving free fermions. This quantum chain is distinct from the classical XY model.
Remanent magnetization Created 2026-10-14 Updated 2026-11-05
Remanent magnetization is magnetization retained after the applied magnetic field has been removed. Magnetic minerals cooling in an ambient field can preserve information about that field in a planetary crust. Such a record may outlive the planetary dynamo which originally produced it. Crustal remanence therefore differs from a present field maintained by conducting-fluid motion.
Ronald B. Goldfarb Created 2026-10-13 Updated 2026-11-05
A researcher in magnetic measurement whose account of demagnetizing factors distinguishes the field applied to a specimen from the field produced by the specimen’s own magnetization. For a cylinder, that internal field is generally nonuniform, so an instrument sampling the central region and one averaging the entire specimen need not require the same correction. This explains why specimen shape and measurement geometry matter when inferring a material’s magnetic susceptibility.[ref]
Ryo Takahashi Created 2026-10-18 Updated 2026-11-05
Ryo Takahashi coauthored a Barnett effect experiment on gadolinium above its Curie temperature. A fluxgate magnetometer measured magnetization during rapid mechanical rotation, testing rotation-induced magnetic response in the regime of paramagnetism.[ref]
Sadamichi Maekawa Created 2026-10-18 Updated 2026-11-05
Sadamichi Maekawa coauthored a Barnett effect experiment on gadolinium above its Curie temperature. A fluxgate magnetometer measured magnetization during rapid mechanical rotation, testing rotation-induced magnetic response in the regime of paramagnetism.[ref]
Sam Edwards Created 2026-10-18 Updated 2026-11-05
A theoretical physicist who, with Philip Warren Anderson, developed a description of spin glasses using an order parameter based on persistent local-spin correlations. A material can lack a net magnetization while individual spins retain memory of their orientation. Edwards's own account connects this problem with ideas from disordered polymer networks and explains the use of replicas in calculating thermodynamic behavior.[ref]
Samuel Jackson Barnett Created 2026-10-18 Updated 2026-11-05
Samuel Jackson Barnett demonstrated that mechanical rotation can magnetize a material, the Barnett effect. Rotation couples to the angular momentum associated with microscopic magnetic moments, producing a magnetic response without using an applied field as the driving cause. The effect connects mechanical angular momentum with magnetization and complements experiments in which a change of magnetization produces mechanical motion. It makes the magnetic moment's connection with microscopic angular momentum experimentally accessible.[ref]
A physicist listed as professor of physics at the University of California, Los Angeles, in its 1927–1928 faculty announcement.[ref]
Satoru Okayasu Created 2026-10-18 Updated 2026-11-05
Satoru Okayasu coauthored a Barnett effect experiment on gadolinium above its Curie temperature. A fluxgate magnetometer measured magnetization during rapid mechanical rotation, testing rotation-induced magnetic response in the regime of paramagnetism.[ref]
Consider a mechanically free isotropic model of a saturated ferromagnet, at fixed temperature and fixed magnitude of magnetization. Let be a unit vector, where is the saturation magnetization. The magnetostrictive strain is an infinitesimal strain tensor, measured relative to a reference with randomly oriented magnetic domains. This reference convention matters: it sets the orientational average of the preferred strain to zero. Define , the saturation magnetostriction, as the longitudinal relative length change in this model.
Rotational symmetry permits a symmetric second-rank tensor made from of the form , where is the Kronecker delta. If we restrict attention to a change of shape with zero first-order volume change, its trace gives . Requiring the longitudinal component to equal gives . Hence
The tensor product is symmetric and unchanged under . It uses two copies of the magnetic direction, so the third-rank isotropic tensor obstruction in isotropic linear magnetostriction vanishes does not apply. More generally, a small-magnetization expansion can contain ; isotropy alone does not require its trace to vanish. The displayed saturated formula isolates the volume-preserving orientational contribution, rather than asserting that every material has zero volume magnetostriction.
Along a measuring unit vector , with , the fractional length change is
For a stipulated and reference length , alignment gives and a perpendicular orientation gives . Rotating from perpendicular to parallel therefore changes the length by , even though the saturated longitudinal value relative to the random reference is . A negative reverses these elongation and contraction signs.
The eigenvalues of this infinitesimal strain tensor are , so to first order. This is not exact finite incompressibility: using the illustrative deformation gradient gives
A finite-deformation law would need higher-order corrections if exact volume conservation were required.
Saturation magnetization 2026-10-14
Saturation magnetization is the limiting magnetization when the responding magnetic moments are fully aligned within the stated model or experimental regime. In independent-moment magnetic response, . Reaching a large magnetization does not imply a large differential magnetic susceptibility: the remaining slope can be almost zero.
Single-domain ferromagnetic particle Created 2026-10-20 Updated 2026-11-05
A ferromagnetic particle with no internal domain wall. Magnetization reversal can proceed by rotation or nonuniform modes; thermal activation and anisotropy determine blocking and coercivity. Small size alone does not guarantee a permanent hard magnet.
Single-quantum coherence 2026-11-05
Single-quantum coherence is a component of NMR coherence with coherence order or . It connects basis states whose total spin projections differ by one unit. Under the convention , an order- component acquires .[ref]
For one spin one-half nucleus, and are the positive- and negative-order components. Transverse magnetization is represented by their combinations,
A Hermitian density matrix contains conjugate off-diagonal entries, so it can encode two real transverse components while containing both coherence-order signs.
An original state example uses
Its eigenvalues are0.8 and0.2 for every , and its populations remain one half. Taking the traces against gives
At , the transverse expectation has moved from to without changing the populations. This is a constructed quantum-state comparison, not a measured thermal polarization.
Conventional transverse NMR detection can access the appropriate single-quantum contribution. The complex receiver signal chooses a phase convention for combining its two measured components. This is why a statement about a detected phase sign should specify its convention, while the operator transformation above remains explicit.[ref]
Multispin single-quantum terms need not be merely isolated-spin magnetization: correlations can accompany the projection change. A coherence order identifies the transformation under a chosen common rotation, rather than uniquely specifying every spin correlation or the pulse sequence that generated it.
Soft magnetic material 2026-10-20
A soft magnetic material changes its magnetization relatively easily and has a low coercive field. High useful permeability and small hysteresis losses favour such materials in electromagnets and alternating-field cores. “Soft” describes magnetic response rather than mechanical softness; electrically resistive ferrimagnets can also be magnetically soft.
Solenoid Created 2026-10-06 Updated 2026-10-14
A solenoid is a coil of electrical conductor, usually wire wound into a helix around a circular cylinder. The same electric current flows through its successive turns. Each turn contributes a magnetic field; the superposition principle makes their axial contributions reinforce inside the coil. Curl the fingers of your right hand in the direction of the electric current around the turns: the thumb gives the interior magnetic field direction by the right-hand rule. Throughout this branch, is the total number of turns, is the coil length, and is the solenoid turn density. [ref].
The attraction of a long solenoid is a controllable, nearly uniform magnetic field over an interior working region: change the electric current to tune its strength, or reverse the electric current to reverse its direction. This makes it a useful setting for studying the Lorentz force, measuring magnetic flux, and constructing an inductor. Its geometry turns the many contributions from individual turns into the simple long-solenoid approximation. A real finite coil has end fields and leakage; its exterior magnetic field is not zero. The on-axis magnetic field of a finite solenoid below quantifies that difference.
Historically, the coil helped connect magnetic fields to electric currents. In his memoir on the mathematical theory of electrodynamic phenomena, Ampère modeled the interactions of magnets using the ends of solenoids in place of microscopic magnetic constituents. This was a route toward explaining magnetism by electric currents, rather than a modern microscopic account of magnetization. [ref]. The historical setting is documented by the [ref].
Solenoid inductance 2026-10-14
For a long vacuum-core or air-core solenoid with fixed geometry and linear magnetic response, neglecting end effects gives self-inductance
Here is the total number of turns, is the solenoid turn density, and is the interior cross-sectional area. The reason for the square of is physical: more turns produce more magnetic field, and more turns link the resulting magnetic flux. Approximately equal magnetic flux through each turn gives magnetic flux linkage ; division by the electric current yields . [ref].
For the same , , and , the area is . The long-coil estimate is
At , each turn links approximately and the total magnetic flux linkage is approximately . Their ratio to is the stated self-inductance. A real finite coil need not give precisely these values: the axial centre correction above is not by itself a correction formula for inductance, which depends on magnetic flux across all the turns.
At fixed and , doubling quadruples . At fixed solenoid turn density and area , doubling doubles both and . These are different changes to the geometry, so there is no contradiction between at fixed and at fixed . A magnetic core requires its own magnetic permeability model; nonlinear magnetization can make a constant- description inadequate.
Spin density wave 2026-10-20
A spatially modulated spin density, distinct from a charge density wave. Opposite modulations of spin-up and spin-down occupations can give a periodically varying magnetization while their total charge density stays uniform.
Spin echo 2026-10-18
A spin echo is a reappearance of transverse magnetization after a pulse sequence reverses an earlier spread of phases. An ensemble can have almost no net transverse magnetization while its components retain enough individual phase memory to reassemble. In the ideal Hahn echo below, a short 90° pulse prepares transverse magnetization, a 180° pulse follows after time , and the signal refocuses at . The receiver observes freely precessing magnetization, as in free induction decay; no third driving pulse is needed at the echo time.
The useful distinction is between cancellation in an ensemble average and loss of recoverable phase memory. A static spread of Larmor precession frequencies can make free induction decay much faster than transverse nuclear magnetization decay. A spin echo can remove that static spread from the echo amplitude, allowing a more selective measurement of transverse relaxation. It does not in general reverse noise, population relaxation, or every interaction between spins.
Spin-flop transition Created 2026-10-05 Updated 2026-11-05
A spin-flop transition is a field-induced reorientation of an antiferromagnet. In the classical easy-axis case, an applied magnetic field along the preferred axis can drive the nearly antiparallel sublattice magnetic moments into a canted arrangement whose dominant opposing components lie approximately transverse to the field. The moments acquire a net field-aligned component while retaining strong antiferromagnetic opposition.
The competition is between magnetic anisotropy favouring the easy axis, the exchange interaction favouring opposing moments, and the energy gained by responding to the applied field. The classical reorientation is a first-order phase transition; its neighborhood can include coexistence and magnetic domains.[ref]
A field sweep measuring magnetization or magnetic susceptibility detects the changed response. A spin flop is a reorientation into a canted antiferromagnetic state; full alignment at much stronger field is a separate saturation process.
Spin glass 2026-10-18
A spin glass has frozen, irregular local spin magnetization without the periodic magnetic order of a simple ferromagnet or antiferromagnet. Competing interactions and quenched disorder make the distinction important: zero average magnetization need not mean that every spin is freely fluctuating.[ref]
The frustrated Ising triangle gives a small example of incompatible local preferences. The Edwards-Anderson order parameter and spin overlap then ask a different question: how can one describe persistent local order when averaging the spins themselves hides it? These concepts also connect interacting magnets to the energy minima used by a Hopfield network to retrieve a memory. The triangle below illustrates frustration, without establishing a macroscopic spin glass phase.