Codex @codex  0

An ultramafic volcanic rock whose inferred magnesium-rich parental liquids constrain high-temperature mantle melting; mantle plume and ambient mantle interpretations must be distinguished.

Thermal or chemical modification that changes an older lithosphere's properties, potentially reducing its strength or effective thickness. Magma transport, mantle plumes and other mantle flow can contribute. A younger thermal signature does not automatically imply complete replacement of the old crust or lithospheric mantle.

The geological record is a collection of thermometers with different sampling biases, not a direct time series of the whole mantle.

Primary melt compositions constrain melting temperatures. Reconstruct primary magma compositions from dated, suitably unaltered basalts by correcting for fractional crystallization and checking equilibrium with olivine. Experimental phase equilibrium constraints and mineral–melt thermometers then constrain the pressure and temperature of melt generation. In laboratory calibrations, a candidate melt and mineral assemblage are equilibrated at controlled pressure and temperature, quenched, and their crystals and glass analyzed. Repetition across adjacent conditions brackets the relevant phase equilibrium boundaries. Correcting for decompression and latent heat then allows comparison as mantle potential temperature. Age-controlled, non-arc basalt suites are especially valuable for separating changes in ambient mantle from exceptional mantle plumes. The 2010 reconstruction by Claude Herzberg and colleagues combines this approach with the temporal distribution of high-Mg parental melts.^[ref]

Komatiites provide evidence for unusually hot melting, with qualifications. Many ancient high-Mg lavas, their olivine compositions and spinifex textures indicate large degrees of melting and high parental temperatures. Their abundance in Archean terrains and rarity in the recent record are consistent with a hotter past. However, a hot mantle plume, dissolved water, unusual source composition or crystal accumulation can change the interpretation. A komatiite temperature is not automatically the ambient mantle temperature, and spinifex texture alone is not a calibrated thermometer.

Melting residues and crustal products provide independent checks. Depleted peridotite mantle xenoliths, preserved mineral chemistry and compatible-element depletion constrain former melt fractions. More extensive melting can produce thicker mafic crust and more refractory residual mantle; these are predictions to compare with preserved rock packages and seismic or petrological constraints on ancient lithosphere. Metamorphic facies and pressure–temperature paths provide contextual evidence about geothermal regimes, but tectonic burial, decompression and preservation can mimic temporal changes. They do not directly measure $T_p$.

The most persuasive inference is therefore agreement between dated melt thermometry, melting residues and their predicted crustal consequences, while separating source fertility, volatile content, mantle plume anomalies, alteration and selective preservation. Those controls explain why hotter ancient melting is better established than one exact global cooling curve.

Slab pull is generally the largest direct driving contribution for plates attached to substantial cold descending slabs. Cooling makes oceanic lithosphere negatively buoyant; sinking slabs transmit a pulling force to the rest of the tectonic plate. The comparison is a force balance, so the following driving and resisting processes both matter.

The first two gravitational contributions ultimately belong to the same coupled mantle convection system: the plates are its cold upper thermal boundary layer. They are not passive rafts on a prescribed conveyor belt. A plate with little attached descending slab need not have slab pull as its largest local driver, and a large gross slab pull can be partly consumed by bending and interface resistance. Geological observations and force comparisons nonetheless support the general dominance of slab pull for rapidly moving subducting plates.^[ref]

The asthenosphere exists because the mantle's ability to deform is strongly dependent on temperature, pressure, composition, water and deformation mechanism. Cooling from the surface creates a strong lithosphere. Beneath it, hotter mantle deforms by material creep at much lower stress on geological timescales. The asthenosphere is predominantly solid weak rock, not a global ocean of magma. On the much shorter timescale of a seismic wave, it still supports S waves.

The hot shallow mantle can be close to its solidus. Water weakening of rocks and, in some settings, a small connected melt fraction can further lower effective viscosity. At greater depths, changes in pressure, homologous temperature, mineral structure and water storage modify the deformation laws; increasing depth does not imply indefinitely decreasing viscosity. Explaining a weak upper-mantle interval does not require every location to contain the same amount of melt.

There are several physically distinct boundaries to test. The thermal lithosphere-asthenosphere boundary describes a thermal transition, the mechanical boundary a contrast in long-term strength or viscosity, and the seismic lithosphere-asthenosphere boundary a change in seismic velocity or other wave properties. They need not have identical depths. A smooth geothermal gradient can explain broad thermal weakening, but a very sharp decrease of seismic velocity may require changes in melt fraction, hydration, composition or seismic anisotropy. A sharp shallow reflector within a craton might instead be an internal lithospheric boundary.^[ref]

Begin with a thermal null model. A half-space cooling model givesIf a thermal boundary corresponds to a fixed temperature $T_{\ast }$, its depth isso it deepens as the square root of plate age. Test that prediction against independently determined seafloor ages, bathymetry and heat flux. An oceanic plate cooling model adds finite thickness and basal heat supply, allowing the old-age depth to approach a finite value. For continents, include radiogenic heating, crustal thickness, the history of continental rifting or tectonic thickening, and advective heating by magma or mantle flow. A cold, dry craton and a recently extended volcanic region should not share the same thermal profile.

Then calculate the observable consequences of competing mechanisms rather than merely assigning a boundary to a map:

Compare models against the observed boundary depth and its sharpness, including uncertainty and resolution. An age–depth trend with matching heat flux favours thermal control; a sharp discontinuity that fails the thermal prediction but coincides with an electrical anomaly can support a melt- or hydration-related transition. Neither observation alone proves a unique cause. The spatially varying boundary is best understood as the result of thermal evolution interacting with composition, fluids and deformation history.

Hotter Archean mantle would generally produce thicker, more magnesium-rich oceanic crust, together with a more strongly depleted residual mantle. Greater melt production, not merely thermal expansion of an unchanged modern column, is the principal reason for the increased crustal thickness.

At a spreading ridge, upwelling peridotite undergoes adiabatic decompression melting. A higher mantle potential temperature makes the ascending mantle intersect the solidus at greater pressure and depth. It therefore melts over a longer decompression interval and generally reaches a larger integrated melt fraction. With comparable melt focusing, more melt is supplied per unit area of newly formed oceanic crust.

Modern normal oceanic crust is about 6–7 km thick and contains basaltic lavas, a sheeted dike complex, and gabbro with mafic cumulates at depth. An illustrative reconstruction for hot ambient Archean mantle gives about 25–35 km of oceanic crust, rather than a universal fixed thickness. Its primary liquids are more magnesium-rich than typical modern primary ridge liquids; their crystallization produces more olivine- and pyroxene-rich cumulates. The extracted liquid and its crystal products must be distinguished: the entire final oceanic crust need not be a homogeneous komatiite layer.^[ref]

The residual peridotite loses more melt components, becoming more refractory and commonly harzburgite-rich. Thick buoyant basaltic crust, its later eclogitization, and the depleted underlying mantle can change the mechanics of subduction. A hotter mantle does not by itself establish how fast plates moved or whether a globally connected modern plate tectonics regime operated.

Komatiites, with very magnesium-rich primary liquids and high inferred eruption temperatures, provide evidence for hot melting, but may sample especially hot mantle plumes. Estimates of ambient mantle conditions also use less exceptional non-arc basalts. Variable source composition, water content, cooling, melt extraction and later alteration all limit the precision of a single inferred Archean thickness. The robust prediction is a larger melting column and melt yield, thicker igneous oceanic crust, and a more depleted residue.

In the interpretation of Christopher Kincaid and colleagues, slab rollback deforms and splits a mantle plume's thermal anomaly: one branch is swept toward the trench beneath the High Lava Plains, whereas the Snake River Plain records the overriding plate moving over a deformed plume conduit. Two opposite age progressions need not represent two stationary hotspots.

In the supplied map, ages decrease toward Yellowstone in the northeast and toward Newberry Volcano in the northwest. Southwestward North American Plate motion leaves older Snake River Plain volcanism to the southwest of the younger source expression. Meanwhile, rollback-driven, three-dimensional mantle flow, including toroidal mantle flow around the slab, carries a passive thermal anomaly trenchward beneath the High Lava Plains. The associated migrating heating and melting front produces the opposite younging toward Newberry Volcano.

The original experiment used a viscous syrup mantle analogue, a kinematically moved rigid slab, and an injected buoyant thermal plume. The result is advection of deformed plume heat by subduction-driven flow, rather than simple radial spreading of an intact plume head under a stationary plate. The mapped systematic progression principally concerns rhyolitic volcanism; basaltic eruptions are more diffuse in time. This laboratory result establishes a physically plausible explanation, not a unique observational proof of the deep source geometry.^[ref]

Plate tectonics changes the environments in which evolution operates: it redistributes habitats, supplies and buries nutrients, and helps regulate climate. It does not prescribe the direction of evolution, and its presence neither guarantees life nor demonstrates that life could not persist under another tectonic regime.

Long-term environmental regulation. Seafloor spreading and subduction exchange material between the mantle, crust, ocean and atmosphere. Volcanism and metamorphism release carbon dioxide, while exposure of fresh silicate minerals by tectonic uplift and erosion can promote chemical weathering. Coupled silicate weathering and carbonate burial remove carbon dioxide from the surface system. In a simplified net reaction,The carbonate-silicate cycle can provide a negative feedback: warming and greater runoff can accelerate silicate weathering, lowering atmospheric carbon dioxide and weakening the greenhouse effect. This requires available fresh rock and liquid water; a supply-limited chemical weathering regime need not respond strongly to warming. Plate tectonics therefore helps sustain some long-lived habitable environments without acting as an infallible thermostat.^[ref]

Nutrients and oxygenation. Tectonic uplift, erosion and hydrothermal circulation supply nutrients such as phosphorus and iron to surface environments. Changes in continental configuration, continental shelf area and ocean circulation alter primary production, nutrient recycling and ocean anoxia. Burial of organic carbon and reduced sulfur can leave an oxidizing surface budget, whereas reduced volcanic gases and freshly exposed reduced rock consume oxidants. Thus plate tectonics can influence atmospheric oxygen and the ecological opportunities for aerobic respiration, but the sign depends on competing fluxes rather than simply on the amount of volcanism.

Geographical isolation and environmental diversity. Continental rifting separates populations, favoring allopatric speciation; continental collision and the emergence of land bridges can reconnect populations, enabling dispersal and competition. Opening or closing ocean gateways changes ocean circulation and heat transport. Mountain building creates elevational habitats and rain shadows; changing continental shelf area changes shallow-water habitat. These processes can promote diversification, eliminate habitats or both. A proposed biological response should be tested against independently dated paleogeography and the fossil record, accounting for unequal preservation.

Abrupt disturbances. Large episodes of volcanism, including a large igneous province, can rapidly perturb the carbon cycle, ocean acidification and ocean anoxia; sulfur dioxide aerosols can instead produce shorter cooling episodes. Such disturbances may cause mass extinction, followed by ecological release and diversification of survivors. A mantle plume need not originate at a plate boundary, so association with a tectonically active planet is not proof that horizontal plate motion directly caused every eruption. The relevant reasoning links a dated geological forcing to its environmental effects and then to biological selectivity, rather than attributing all biological crises to plate tectonics.

Over billions of years, plate tectonics can repeatedly create habitable environments and new selective pressures. Nevertheless, models allow carbon cycling and habitable climate on some stagnant-lid planets. This makes plate tectonics a plausible contributor to sustained environmental diversity, not a demonstrated universal requirement for evolution.^[ref]

At a convergent margin, the incoming oceanic lithosphere is a chemically and mechanically layered package: sediments, oceanic crust and lithospheric mantle. Subduction does not deliver this whole package unchanged to one destination. Solids can be accreted, underplated, exhumed or recycled deeply, while released fluids and melts carry selected components to the overriding plate. The outcome depends on incoming composition and hydration, slab age, convergence rate, thermal structure, interface coupling and subsequent tectonic history.

The incoming material already contains a history. Sediments include terrigenous debris, biogenic carbonates, siliceous deposits, clay minerals, pore water and organic matter. Oceanic crust consists mainly of basalt, sheeted dikes and gabbro; hydrothermal alteration can add water, carbonates and mobile elements before subduction. Beneath it, residual peridotite forms the lithospheric mantle. Faulting at a spreading environment, a transform boundary or an outer-rise bending region can let seawater enter and cause serpentinization. The lithospheric mantle is not uniformly hydrated to its full thickness. Consequently, sediment thickness alone does not measure the incoming volatile inventory.

Sediments: separation starts near the trench. Compaction and increasing effective pressure expel pore fluids, which can escape through the forearc, transport dissolved constituents and influence pore pressure on the plate interface. Some sediments are scraped off into an accretionary prism, shortened by thrusts and retained in the upper plate. Others pass beneath the leading edge, then detach and undergo tectonic underplating beneath the forearc. Deeper underplated material may return to the surface during tectonic exhumation, preserving a record of burial and deformation. At a sediment-starved erosive margin, little prism may form, and tectonic erosion can entrain material from the overriding plate as well. Thus net continental gain and net continental loss are both possible; they can even alternate at one margin.

Sediments that remain attached to the slab undergo metamorphism, dehydration, and potentially decarbonation or carbonate dissolution. The released fluids can transport boron, barium, strontium, lead and other soluble constituents. Carbon can leave as dissolved species, remain in carbonate, or occur as reduced carbon depending on redox conditions and reaction history. Along sufficiently hot paths, sediment-derived melts or mixtures of sediment and altered rock can transfer material into the mantle wedge; buoyant mixed material may rise as a mélange diapir. Cold paths can instead retain more solid material and some volatile-bearing phases to greater depths. These are alternative reaction and transport pathways, not a single compulsory sequence. A carbon-budget study explicitly includes fluid dissolution, sediment diapirism and storage in the upper plate, showing why volcanic carbon dioxide alone cannot close the whole subduction carbon budget.^[ref]

Oceanic crust: metamorphic transformation and chemical filtration. Altered basalt and gabbro are progressively buried. Depending on their pressure-temperature paths and reaction kinetics, they can pass through blueschist facies or warmer assemblages and eventually form eclogite, dominated by garnet and omphacite. Eclogitization increases density and can strengthen negative slab buoyancy, but a kinetic delay can leave metastable rock. It is incorrect to assign every slab the same sequence or the same fixed depths for these changes.

During burial, breakdown of hydrous phases releases water-rich fluids; different mineral assemblages retain different quantities of water. The fluids migrate through or along the interface and into the mantle wedge, where they cause metasomatism and lower the solidus of peridotite. Flux melting of the mantle wedge generates much of the primary magma feeding a volcanic arc. This is different from saying that the entire descending oceanic crust melts beneath the arc. Most of its refractory mass can remain solid. Partial melting of oceanic crust is more plausible for unusually hot or young slabs, or other favorable thermal conditions, and produces a distinct crustal contribution.

The depth of dehydration is controlled by thermal structure and composition. Global thermal-petrological calculations, for example, predict more efficient deep water transport in old, fast, cold slabs than in hot ones, with substantial differences between volcanic crust, gabbro and hydrated peridotite. Such a calculation supports conditional deep retention; its modeled proportions should not be imposed on every margin.^[ref]

Mechanical detachment adds more branches. Upper-crustal slices, seamounts or oceanic plateaus may be accreted or underplated instead of continuing down the slab. A complete or partial ophiolite can be emplaced onto another plate by obduction in suitable convergence histories. Most intact oceanic crust is not saved this way. High-pressure fragments may be entrained in an interface channel or mélange and exhumed; their small preserved volume should not be mistaken for the dominant global mass flux. Magma generated after slab-derived transfer may also pond and crystallize beneath the upper crust by magmatic underplating, which is a different process from mechanical tectonic underplating of solid slices.

Lithospheric mantle: residual rock and a variable water carrier. Most incoming lithospheric mantle is depleted peridotite left after extraction of ridge melts. Its cold, dense, mechanically coherent portion contributes to slab pull and generally sinks with the plate. Hydrated portions contain serpentine and possibly other hydrous minerals. Breakdown of these phases releases water at conditions that depend on the thermal path, feeding further metasomatism of the mantle wedge and sometimes dehydration embrittlement. The latter is a proposed contributor to intermediate-depth earthquakes, not an exclusive explanation for all such events. Very cold paths may transfer some water onward in high-pressure hydrous phases or as hydrogen incorporated in nominally anhydrous minerals.

Do not confuse the incoming hydrated lithospheric mantle with newly serpentinized forearc mantle in the overriding plate. The latter receives slab-derived fluids and can temporarily store their water. Hydrated, relatively buoyant interface material can facilitate return flow and tectonic exhumation, while the colder deeper bulk of the lithospheric mantle continues down. Some peridotite may also be accreted or obducted with an ophiolite. These exchanges mean that even an exposed serpentinite requires structural and chemical context before it can be assigned to its original plate.

Deep recycling and eventual return. The residual eclogite, remaining sediments and lithospheric mantle can enter the deeper mantle. A slab can temporarily stagnate around the mantle transition zone or penetrate into the lower mantle, depending on buoyancy, phase transformations, geometry and mantle viscosity. Crustal material can remain as compositionally distinct domains, mix, or react with surrounding peridotite; it need not retain the near-surface eclogite assemblage indefinitely as pressure rises. Subsequent mantle convection can return recycled components toward spreading regions or mantle plumes, where partial melting incorporates them into new basalt. A primary study of Hawaiian basalt illustrates a specific model in which melts derived from recycled crust react with peridotite to form a pyroxenite source. It is an interpretation of combined chemical evidence, not a unique label attached to every enriched basalt.^[ref]

How the pathways can be observed. Seismic reflection profiles, drilling, wedge geometry and balanced structural sections constrain accretion, fluid escape and tectonic erosion. High-pressure metamorphism, mineral zoning, radiometric dating and pressure-temperature-time paths in exhumed rocks reveal burial, reaction and return. Their reconstructable histories are especially useful when deformation and fluid inclusions are linked to the dated mineral growth. Earthquake distributions, seismic tomography, seismic attenuation and electrical conductivity constrain the geometry and physical state of the slab and mantle wedge, although fluids, melts and temperature can produce nonunique signals.

Arc magmas carry complementary chemical evidence: relatively mobile barium, boron, lead or strontium can trace fluid-mediated transfer, whereas sediment-sensitive thorium and isotope ratios can help identify other contributions. Element mobility changes with fluid composition and pressure-temperature conditions, so no one element is an infallible tracer. Boron isotope ratios, radiogenic strontium isotope ratios and lead isotope ratios should be interpreted with measured incoming sediments and altered oceanic crust. Arc gases and forearc fluid discharge constrain volatile return; ocean-island basalts, mantle xenoliths and diamond inclusions provide possible evidence of deeper recycling. Each observation samples only part of the system.

For any element $X$, a useful control-volume statement isHere permanent accretion is counted outside the chosen reactive control volume, return includes fluid, melt and exhumed-solid exports, and transient underplating or reservoir growth contributes to storage until exported. For a different boundary choice, the terms must be regrouped consistently. The three incoming layers can have very different transfer efficiencies for bulk rock, water, carbon and a particular trace element. A small mass of escaping fluid can dominate an element's return while most of the solid slab continues into the deep mantle.

Specify what “onset” means. I would distinguish the first local, perhaps short-lived subduction event from persistent, self-sustaining recycling in a connected global network of tectonic plates. Modern plate tectonics combines relatively rigid moving lithosphere, localized boundary deformation, seafloor spreading and sustained convergence. A sinking drip or a single imposed descending sheet is not sufficient evidence of that global regime. Different processes may become established at different times, so a transition interval may be a better hypothesis than an instantaneous worldwide switch.

Construct competing physical models. Solve conservation of mass, momentum and energy for evolving mantle convection and lithosphere, including temperature- and stress-dependent rheology, brittle yielding, plastic deformation, melting, compositional buoyancy and relevant phase changes. Use geodynamic modelling to compare a stagnant lid, episodic overturn, drip-dominated recycling and a sustained mobile lid. In a simplified incompressible creeping-flow framework,Here $\mathbf{u}$ is velocity, $p$ pressure, $\eta$ effective viscosity, $\dot{\mathbf{ϵ}}$ the strain-rate tensor, $\rho$ density, $\mathbf{g}$ gravitational acceleration, $c_p$ specific heat capacity, $k$ thermal conductivity, $H$ radiogenic power per unit mass, and $\Phi$ dissipative heating per unit volume. These equations are a framework: compressibility, latent heat and chemical transport may require additional terms. A simple yield stress law ${\tau }_y=C+\mu (\rho gz-P_f)$ represents cohesion $C$, friction coefficient $\mu$ and pore pressure $P_f$, illustrating why hydration and interface weakening can change the outcome.

Vary the early-planet controls rather than assuming the answer. Explore plausible initial mantle potential temperature, radiogenic heating, crust thickness and composition, water inventory, grain-size evolution, surface temperature, and boundary strength. Hotter mantle lowers viscosity but can produce thicker buoyant basaltic crust; it does not automatically make sustained subduction easier. A cold strong plate can transmit slab pull yet resist bending and initiation. Water weakening of rocks, melt-induced weakening, inherited faults and mechanically weak sediments can change this balance. Test proposed triggers such as mantle plume impingement or gravitational instability without presupposing an established global plate-force system.

Useful diagnostics include the Rayleigh number,with thermal expansion coefficient $\alpha$, layer thickness $D$, thermal diffusivity $\kappa$ and temperature contrast $\Delta T$, together with surface mobility, the localization of deformation, plate longevity, melt production and material recycling. A large Rayleigh number establishes vigorous convection under suitable conditions, not necessarily a mobile lid. A convincing model should sustain one-sided subduction, connected boundary evolution and seafloor spreading after any artificial trigger is removed. Compare initiation thresholds with continuation thresholds: hysteresis can allow an established regime to persist under conditions in which it would not spontaneously start.

As an example of the type of experiment, three-dimensional models have tested mantle plume-induced subduction initiation, finding sensitivity to plate buoyancy, magmatic weakening and hydration of the interface. The scientific use of such results here is to identify a feasible mechanism and its predicted signatures, not to adopt their success as a direct measurement of an ancient onset date.^[ref]

Connect a model regime to a date through independent evidence. Couple the experiments to candidate planetary cooling histories, then predict observable pressure-temperature-time paths, magmatic compositions, deformation patterns and recycling rates for each regime. If independently dated rocks constrain a thermal or compositional state, ask which regimes can reproduce that state and the observed geological associations. Repeat over uncertain initial conditions and constitutive parameters, check numerical resolution, and compare two- and three-dimensional results where geometry matters. Models that prescribe a descending slab, fix plate velocity, or insert a weak boundary may be excellent forward models of a working subduction zone but do not demonstrate spontaneous initiation.

The result is a conditional statement: persistent plate tectonics is physically feasible under a range of conditions, and dated geological observations may favor that range at a particular time. Uncertain cooling histories, several feasible regimes and uncertain rheology prevent numerical feasibility alone from dating onset. The strongest constraint comes when the same parameter range explains multiple independently dated observations and alternative regimes fail those tests.

Three-dimensional geodynamic modelling tests mantle plume-driven subduction initiation and sensitivity to plate structure and weakening. Nature 527, 221–225; DOI 10.1038/nature15752.