Take positive heat flux upwards, along increasing , and denote thermal conductivity by . Fourier's law gives . Since , differentiation of the literal printed expression gives
Its negative young-age flux is another sign of the unphysical initial profile. For the explicitly corrected hot initial plate, the surface heat flux of a cooling plate is instead
The old-age limit is . For , replacing the Gaussian sum by its leading integral gives , recovering the half-space cooling model. Neither nor is numerically specified, so the age-dependent flux remains symbolic as requested.
In the oceanic plate cooling model, is temperature, height above the plate base, plate thickness, and age since formation at the spreading axis. With half-spreading rate , a parcel at distance has . The surface and basal temperatures are and respectively. The positive integer labels a sine diffusion mode. For constant thermal diffusivity ,
Substituting one sine mode into fixes this normalization; itself is the diffusion timescale before the factor .
Source qualification. The printed transient coefficients have the wrong sign for the intended initially hot plate. Indeed, in the interior,
Thus the literal zero-age profile is , where , rather than . It would even approach from inside the upper boundary. The intended hot-ridge cooling solution reverses the transient sign, using . Both versions have the same boundary temperatures and old-age limit. Part (b) gives both surface-flux expressions; the physical ridge-elevation and ridge-push calculations explicitly use the hot initial plate. This sign is present in the original PDF as well as the held transcription.
An electrostatically defined quantum dot uses depletion gates to confine a small island laterally in a two-dimensional electron gas. Two narrow barriers allow weak tunnelling to source and drain; a plunger gate tunes the island's electrochemical levels, and additional gates can form a double quantum dot. Adjusting the gates resolves successive charge states and eventually reaches the single-electron regime. An electrical dot is defined by confinement and tunnel coupling, not simply by the drawn metal area.
In a constant interaction model,
Here is gate-induced charge and total island capacitance. Successive additions cost , with spin, exchange and correlations modifying the orbital term. Coulomb blockade appears when no allowed charge transition lies in the source–drain energy window. Gate sweeps give charge steps and transport peaks; finite-bias Coulomb diamonds constrain charging and orbital energies under a stated bias convention. Resolved single-electron operation requires thermal and tunnel broadening smaller than the relevant addition energies.
Quantum-dot charge sensing avoids relying on a measurable current through a nearly isolated dot. A nearby quantum point contact biased on a sensitive conductance slope, or a single-electron transistor, responds capacitively when one electron enters or leaves the dot. A time trace of sensor current can therefore distinguish from and resolve individual tunnelling events. The sensor measures charge; a spin-dependent step is needed to measure spin.
For one electron, Zeeman splitting gives a lower and a higher spin level separated by . In energy-selective spin readout, initialize an empty dot and pulse both levels below the reservoir chemical potential to load one electron. Then move to a readout configuration
An electron in the higher state can tunnel out, temporarily leaving the dot empty, after which a lower-state electron can refill it. An electron initially in the lower state remains trapped. The charge sensor records a pulse for the first outcome and no escape pulse for the second. This is spin-to-charge conversion; it measures the spin projection along the field through a state-dependent tunnelling probability. A primary single-shot experiment uses this conversion with a quantum-point-contact charge detector.[ref]
Figure 1.
Energy-selective escape and singlet–triplet conversion turn spin information into charge
. Details.
The readout window must be long enough to detect escape but short compared with excited-spin relaxation:
Detector bandwidth must also resolve the empty-state dwell time before refilling. Thermal activation, relaxation before escape, missed fast events and sensor backaction cause errors. Since the excited electron can leave and be replaced, this simple sequence does not preserve an arbitrary initial spin state.
For coupled dots, label charge occupation by . Gate-controlled detuning can make and accessible. Two electrons in the lowest orbital of one dot must form a singlet state; a triplet state requires a different orbital or another higher-energy configuration. Choose a measurement window where the singlet is available but the triplet is not. Then
under spin-conserving tunnelling. The second process is forbidden by spin symmetry and the Pauli exclusion principle, producing Pauli spin blockade. Charge sensing distinguishes transfer from a blocked state. This measures singlet versus triplet content; without a reference spin or additional control it is not a measurement of each electron's absolute spin direction separately.
The exchange interaction in a double quantum dot provides control of these states. In an effective spin description,
For a symmetric weak-tunnelling two-site model with onsite charging cost , . Gates change tunnel coupling and detuning, allowing preparation and evolution followed by a charge-conversion measurement. Spin mixing from local magnetic-field differences or spin-orbit effects can lift blockade, so the sensing interval must be chosen before unwanted relaxation obscures the initial state. Single-dot readout uses spin-dependent escape; double-dot readout can use spin-dependent charge transfer. In both cases the measurable signal is a resolved charge change.
A quantum point contact is made by using negative surface split gates to leave a short narrow channel in a clean two-dimensional electron gas. Its length should be smaller than the transport mean free path; transverse confinement should be strong enough that subband spacing exceeds thermal and lifetime broadening. Low-resistance Ohmic contacts connect large reservoirs. Apply a small source–drain bias, measure current and differential conductance, and sweep the gate to change the channel width or barrier height. Contact and wiring series resistance must be accounted for when comparing plateau values.
The Landauer formula explains the conductance without treating the short channel as a diffusive wire. For each propagating one-dimensional mode, the density of states and group velocity cancel in the incident flux, leaving per spin per energy interval. The reservoir occupation difference supplies the net current:
The factor two assumes unresolved spin degeneracy. In zero-temperature linear response,
A well-transmitted channel has , giving steps as modes open. A finite two-terminal resistance persists even for a perfectly ballistic channel because reservoirs inject only a finite number of modes; it is not evidence of resistive scattering inside the channel. Gate-controlled point-contact conductance quantization was demonstrated in a two-dimensional electron gas.[ref]
The saddle-point model of a quantum point contact resolves how modes open. Near the bottleneck, choose the channel direction as and write
Transverse harmonic confinement gives barrier tops . Scattering through the inverted longitudinal harmonic barrier gives
Small longitudinal curvature makes a sharp transmission threshold compared with the transverse subband spacing; finite curvature rounds each conductance step. This is the explicit smooth-barrier model developed for a saddle constriction.[ref]
Figure 1.
Mode thresholds and half-integer differential plateaus in a stipulated symmetric-bias model
. Details.
At larger source–drain bias, the current samples a finite energy window. For a rigid transmission spectrum at zero temperature,
With symmetric bias, , the nonlinear conductance of a quantum point contact is
If both window edges sample open modes, the usual plateau remains. If one edge samples and the other , differential conductance approaches : a half-integer plateau relative to the zero-bias step. It is a bias-window effect, not half an electron spin degeneracy. Ridges in gate–bias transconductance occur when a reservoir chemical potential crosses a subband threshold; their separations can measure subband energies.
The half-plateau expression assumes symmetric bias and an approximately bias-independent barrier. An asymmetric voltage drop or self-consistent shift of changes the numerical relation. At still larger biases, heating and inelastic scattering can invalidate a rigid elastic saddle model. Thus the zero-bias quantization counts transmitted modes, while nonlinear spectroscopy compares mode counts at the two ends of the bias window.
The fractional quantum Hall effect occurs when interactions produce an incompressible correlated state within a partially occupied Landau level. The orbital kinetic energy is already quantized; the important degeneracy is among many possible arrangements of electrons within the level. Repulsion can lift that degeneracy and create a many-body excitation gap. The interaction scale is of order , where magnetic length ; it is not a gap predicted by independent-electron fractional occupation alone.
A composite fermion description incorporates strong correlations by attaching statistical flux quanta to each electron, with positive integer . The attachment is a representation of correlated wavefunction phases and zeros, not a literal solenoid attached to a particle. Attaching an even number preserves fermionic exchange character. In a mean-field approximation for positive applied field,
The particles consequently experience a reduced effective field. Define the signed effective filling and electronic filling . Their relation is
When effective levels are filled with the same field orientation, , giving . Reversed effective-field orientation has , giving . Thus the Jain sequence is
For , examples are , , on one branch and , on the reversed branch. Fractional electronic plateaus can be understood as integer effective Hall states of these composite objects. The original proposal explicitly makes this connection.[ref]
At a gapped fractional state, longitudinal dissipation becomes very small and the Hall magnitude approaches
Disorder can localize quasiparticles and allow the plateau to persist over a filling interval, provided it does not overwhelm the interaction gap. The Laughlin wavefunction at is a particularly simple correlated example; its charged excitations carry fractions of the electron charge. More generally the basic quasiparticle charge in the simple Jain sequence has magnitude . Such excitations are distinct from noninteracting bare electrons occupying a fraction of a level.
At , the mean effective field vanishes. This permits a compressible composite-fermion Fermi-sea description, rather than an ordinary integer effective-level gap. The external field remains large: cancellation is in the effective description. Not every fractional state is explained by the simplest integer composite fermion sequence, and the effective masses and gaps reflect interactions rather than simply the GaAs band mass. The utility of the construction is that it organizes many observed fractions and their nearby excitations into one understandable pattern.
Carrier confinement changes both the energies and the available optical transitions of a semiconductor. A quantum well confines one direction and leaves two continuous momentum coordinates; a wire confines two directions and leaves one; a quantum dot confines all three and has discrete ideal levels. Confinement becomes important when its level spacing is comparable with thermal, lifetime and disorder energy scales, and strong excitonic confinement involves comparison with the exciton Bohr radius.
Transition energies. In a simple infinite-well effective-mass model of width , a same-index electron-hole transition has threshold
Thus decreasing generally blue-shifts interband absorption and emission through the confinement contribution. Finite barriers, band mixing, strain, nonparabolicity, dielectric environment and Coulomb interactions alter this elementary estimate. In dots, confinement shifts and exciton binding have different size dependences, so a single inverse-square law is not an exact nanocrystal spectrum.
Dimensional density of states. For a parabolic continuum the phase-space volume below kinetic energy scales as , hence the density of states scales as . Each subband threshold therefore contributes a square-root onset in three free dimensions, a constant step in two, and an inverse-square-root singularity in one. A zero-dimensional ideal dot has discrete lines rather than a continuum power law. Real temperature, disorder and lifetime broadening smooth singularities and lines. Optical absorption uses the joint electron-hole density of states multiplied by transition matrix elements and occupations; a bare electronic density of states is not the entire absorption spectrum.
Figure 1.
Original ideal dimensional joint-density-of-states comparison and confinement-induced optical-threshold scaling; arbitrary broadening shown for dot levels
. Details.
Selection and Coulomb effects. Envelope-function overlap and Bloch-state dipole selection rules determine allowed transitions and their polarization. For equal ideal infinite-well envelopes, orthogonality favors matching transverse indices; finite barriers and asymmetric fields can relax that envelope rule. Reduced dimensionality can enhance electron-hole attraction and oscillator strength near an exciton resonance, but the binding energy depends on the actual confinement and dielectric screening. Intersubband transitions within a conduction band are different from interband recombination; in a quantum well they require an electric-field polarization component along the confinement direction.
Devices. Quantum wells, wires and dots allow wavelength engineering, carrier localization and altered optical gain for LEDs and semiconductor lasers. Concentrating states near selected transition energies can improve differential gain and reduce thresholds under appropriate injection and loss conditions. Dot ensembles can instead have substantial inhomogeneous broadening from size variation; nonradiative surface traps and carrier capture can limit an otherwise attractive design. Material confinement does not alone ensure high quantum efficiency.
An applied field across a quantum well shifts electron and hole envelopes apart, usually red-shifting the exciton transition and reducing overlap: the quantum-confined Stark effect. This supports electroabsorption modulation and tuneable optical transitions. Conduction-band intersubband energies can also be engineered for infrared detectors and cascade-laser designs. Optical waveguides and cavities confine photons and affect mode overlap or spontaneous-emission rates, but that photonic confinement is distinct from the carrier quantization derived above. Both must be specified when predicting a real device's threshold, spectrum and output.
A gated quantum dot is an electron island confined in all spatial directions, weakly coupled by tunnel barriers to source and drain and tuned by a plunger gate. Small capacitance makes charge addition costly, while confinement resolves orbital levels. In the constant-interaction model,
The charging contribution to successive addition potentials is ; the often used charging-energy scale differs by a factor of two. Orbital spacing and spin filling add further structure.
For weak coupling, and lifetime broadening must be smaller than the relevant addition energies to see Coulomb blockade. Sequential tunnelling proceeds when an addition level is inside the source-drain bias window and the appropriate charge states are accessible. A gate sweep gives conductance peaks near charge degeneracies and low conductance between them. A bias-versus-gate map shows Coulomb diamonds, with excited-state lines when additional levels enter the window. Their slopes and sizes depend on source, drain and gate capacitances and the bias convention. Cotunnelling gives higher-order transport inside nominally blocked regions; stronger coupling and many-body effects can invalidate the simple sequential picture.
Coherent dot states as a qubit. A single-electron spin has basis , in a magnetic field, split by . A qubit is a controllable coherent state , not just a pair of classical current levels. Initialize through spin-selective loading or relaxation; resonant magnetic or spin-orbit-assisted electrical driving produces rotations. Adjacent occupied dots can couple through a gate-controlled exchange interaction. In the weak-tunnel symmetric Hubbard limit,
Local spin rotations combined with a suitable exchange entangling operation provide universal control in the ideal spin-qubit proposal. Gate pulses must avoid unwanted orbital excitation and leakage, and complete coherent operations before dephasing destroys the information.[ref]
For measurement, place the reservoir electrochemical potential between Zeeman levels so that only one spin state can tunnel out, or use Pauli spin blockade in a double dot. A nearby quantum point contact or single-electron transistor detects the resulting charge change. Such spin-to-charge conversion makes transport useful for reading a spin even when the stored information is not itself a net current.[ref]
A double dot can alternatively encode a charge qubit in left/right occupation, with Hamiltonian . It allows electrical control and charge sensing, but couples strongly to charge noise. Spin qubits also suffer hyperfine, electrical and spin-orbit-related noise, as well as relaxation and readout errors. An observed Coulomb diamond alone establishes charging physics, not initialization, coherent control or a functioning qubit.
Transverse confinement in a short clean channel gives subband dispersions
A gate varies the subband thresholds and channel width. If elastic backscattering is negligible and spin is degenerate, the two-terminal linear conductance is
A fully open subband has , producing conductance steps in units . Magnetic spin splitting can resolve steps. A finite two-terminal resistance remains in a perfect ballistic channel because reservoirs supply and absorb a finite number of transport modes; it does not prove momentum-randomizing scattering inside the constriction.
At finite source-drain bias the two reservoir distributions differ over an energy window rather than at one Fermi energy. Choose and take positive current from source to drain. For spin-degenerate channels,
At zero temperature with a rigid transmission spectrum, . For symmetric bias and neglecting an explicit bias response of ,
If the two window edges lie above different numbers of subbands, the differential conductance can lie at half-integer values in units . For example, two open subbands at one edge and one at the other give . This is a bias-window effect, not fractional charge or a fractional Hall state.
Figure 1.
Original ideal one-dimensional subbands sampled by a symmetric bias window, with integer and half-integer differential-conductance plateaus
. Details.
Mapping transconductance versus gate voltage and source-drain bias reveals boundaries where a reservoir chemical potential crosses a subband bottom, enabling energy-spacing spectroscopy under a specified lever arm and bias division. Finite temperature rounds thresholds over ; reflection, disorder, series resistance and a saddle-shaped barrier reduce or smooth plateaus. Large bias can alter the electrostatic potential, heat carriers or produce inelastic scattering, so the rigid-transmission differential formula is not generally valid without its assumptions. One-dimensional interaction effects can add anomalies beyond this independent-channel model.
graphene is a two-dimensional honeycomb lattice with two sublattices. Nearest-neighbour hopping gives two bands . They touch at two inequivalent valleys. Expanding near valley gives
The two-component spinor describes sublattice amplitudes, not real spin. This is a massless two-dimensional Dirac Hamiltonian with material velocity in place of . The emergent band quasiparticles are relativistic in this mathematical sense; the electron's vacuum rest mass is not set to zero. Real spin and valley each contribute a degeneracy of two in the ideal low-energy model.
A single-walled carbon nanotube is a rolled graphene sheet with carbon nanotube chiral vector . Periodicity requires , selecting lines through graphene momentum space and producing one-dimensional transverse electronic modes. Near a valley,
A quantization line through one of the Dirac valleys in graphene gives a metallic branch; ideal nanotube zone folding gives the criterion . Otherwise the nearest line misses the valley and opens . The transverse momentum gives a carbon-nanotube Dirac mass, with . For a large-radius ideal semiconducting tube, and , showing the inverse-diameter gap. Curvature, strain, spin-orbit coupling and interactions can change the simple classification; nominally metallic non-armchair tubes can acquire small gaps. One-dimensional transverse electronic mode thresholds give Van Hove singularities, unlike graphene's low-energy density of states proportional to .
A gate changes occupation and the Fermi level in both systems. Ideal monolayer graphene can be tuned through charge neutrality from holes to electrons, but an ordinary scalar gate does not open a bulk band gap. Including spin and valley,
The gate relation includes geometric and quantum capacitances, so one should not equate gate voltage to Fermi energy without the capacitance model. A semiconducting carbon nanotube can instead be depleted when its Fermi level lies in a gap and turned on in electron or hole bands. Contact Schottky barriers can strongly influence the observed nanotube field effect. A truly gapless ideal metallic tube cannot be switched off simply by moving the Fermi level through its band crossing. These gate responses reflect band structure and contacts, not a change of wrapping indices.
Figure 1.
Original low-energy graphene cut and metallic or gapped nanotube subbands
. Details.
A single gate-defined dot can trap one electron whose lower and upper Zeeman states define . Initialize by energy-selective loading or relaxation, coherently rotate the spin with a resonant magnetic drive or electrically generated spin-dependent drive, and use neighbouring-dot exchange interaction for two-qubit operations. The dot supplies confinement; a full qubit also requires control, coherence and calibrated readout. A nearby quantum point contact or single-electron transistor detects charge capacitively, so spin-to-charge conversion is needed.
In energy-selective spin readout, set the reservoir chemical potential between the two spin-dependent removal energies. The upper state can tunnel out; the lower remains. Reloading can create a temporary empty-dot signal that a time-resolved charge detector records. Resolving this window requires sufficiently small electron-temperature broadening and stable level alignment. The escape should be faster than spin relaxation, but the empty interval must remain long enough for detection. Useful controls include known-state preparation, sensor-noise measurement, varied waiting time and readout pulses, and checks for missed events or thermally activated false escape.[ref]
tunnel-rate-selective spin readout instead places both candidate removal energies on the allowed side of the reservoir and uses different escape rates . After a window with , the fast state has usually changed charge while the slow state has not. It does not require the reservoir Fermi edge to resolve the state splitting, although it still requires controlled charge occupation, substantial rate contrast and relaxation slower than the mapping. The contrast must have a physical origin. A demonstrated single-dot implementation uses two-electron singlet and triplet states: Pauli symmetry puts the triplet's second electron in a higher orbital with stronger lead coupling. Nearly degenerate states can then be distinguished by rate rather than by their energy difference.[ref]
For a bare one-electron Zeeman pair in the same orbital with an unpolarized lead, different tunnel rates are not automatic. A spin-selective barrier/reservoir or another spin-dependent mechanism is needed. The two-electron singlet/triplet example is a different state encoding/readout arrangement, not evidence that the bare single-electron pair already has useful rate contrast.
For the optimal tunnel-rate readout time, assume no relaxation and equal prior probabilities. The fast-state missed-event probability is and the slow-state false-event probability is . Their average is minimized at
Finite detector bandwidth, preparation errors, state relaxation and unwanted reloading alter this optimum. energy selection is direct for a resolved single-electron spin but sensitive to the narrow alignment window; rate selection has a wider energy operating window but requires engineered rate contrast and a carefully timed charge measurement. Neither method is an ideal nondestructive spin measurement merely because the charge sensor itself is noninvasive.
Figure 1.
Original energy-window and tunnel-rate readout models with an illustrative timing-error curve
. Details.
In Landau gauge for a uniform magnetic field , the guiding centre is . The group velocity is
Thus the upper edge in the original trajectory diagram carries electrons to the right and the lower edge to the left. Reversing the magnetic field reverses both arrows. Semiclassically these are skipping trajectories; quantum mechanically the guiding centres label propagating quantum Hall edge states. The larger orbital-plus-spin energy crosses the Fermi energy farther toward the interior, because less confinement energy is needed. Opposite spins in one orbital branch are therefore spatially separated.
In a clean bulk with the Fermi energy between Landau levels, there are no extended bulk states at that energy. Occupied bulk cyclotron orbits lie below it; one must not draw them as extra conducting Fermi-level channels. Smooth disorder can instead produce localized bulk contours without adding a direct source-to-drain channel.
Figure 1.
Original guiding-centre trajectories for the four Fermi-level channels on each boundary
. Details.
Use , along , and for the electron's confinement potential energy. The spin-resolved Landau level branches in the smooth-edge approximation are
The spin labels denote upper and lower energies; the sign of a material's effective factor is not inferred from the stated positive splitting. In units of , the four occupied bulk energies are . A chemical potential in therefore gives filling factor four. The branches rise at both confining edges and cross the common Fermi energy once at each edge. Each crossing is one spin-resolved quantum Hall edge state; there are four on either side. The two spin branches within an orbital level are separated by , while the intervening gap to the next orbital pair is .
Figure 1.
Original normalized edge spectrum with four occupied spin-resolved bulk branches
. Details.
Orthogonality gives , while the ladder coefficients give and . Squaring the expressions for and therefore gives
Thus
Their equality is the harmonic-potential case of the quantum virial theorem, and their sum is the oscillator energy .
Invert the given ladder operators:
Because the Energy eigenstate are orthonormal, : each operator changes the state to one orthogonal to . Hence
The result also follows from the definite parity of every oscillator energy eigenfunction, but here it follows directly from the specified operators.
Equating the initial and final internal energies, with the same additive constant,
so
This is cooling in free expansion of a van der Waals gas. The gas cools because separating attractive particles raises their potential energy at the expense of kinetic energy. The excluded-volume coefficient cancels from this caloric model. The result assumes a homogeneous equilibrium gas with and positive ; a two-phase final state would require a coexistence calculation rather than this homogeneous formula. The ideal-gas limit has no temperature change.

Pinned article: Introduction to the OurBigBook Project

Welcome to the OurBigBook Project! Our goal is to create the perfect publishing platform for STEM subjects, and get university-level students to write the best free STEM tutorials ever.
Everyone is welcome to create an account and play with the site: ourbigbook.com/go/register. We belive that students themselves can write amazing tutorials, but teachers are welcome too. You can write about anything you want, it doesn't have to be STEM or even educational. Silly test content is very welcome and you won't be penalized in any way. Just keep it legal!
We have two killer features:
  1. topics: topics group articles by different users with the same title, e.g. here is the topic for the "Fundamental Theorem of Calculus" ourbigbook.com/go/topic/fundamental-theorem-of-calculus
    Articles of different users are sorted by upvote within each article page. This feature is a bit like:
    • a Wikipedia where each user can have their own version of each article
    • a Q&A website like Stack Overflow, where multiple people can give their views on a given topic, and the best ones are sorted by upvote. Except you don't need to wait for someone to ask first, and any topic goes, no matter how narrow or broad
    This feature makes it possible for readers to find better explanations of any topic created by other writers. And it allows writers to create an explanation in a place that readers might actually find it.
    Figure 1.
    Screenshot of the "Derivative" topic page
    . View it live at: ourbigbook.com/go/topic/derivative
  2. local editing: you can store all your personal knowledge base content locally in a plaintext markup format that can be edited locally and published either:
    This way you can be sure that even if OurBigBook.com were to go down one day (which we have no plans to do as it is quite cheap to host!), your content will still be perfectly readable as a static site.
    Figure 5. . You can also edit articles on the Web editor without installing anything locally.
    Video 3.
    Edit locally and publish demo
    . Source. This shows editing OurBigBook Markup and publishing it using the Visual Studio Code extension.
  3. https://raw.githubusercontent.com/ourbigbook/ourbigbook-media/master/feature/x/hilbert-space-arrow.png
  4. Infinitely deep tables of contents:
    Figure 6.
    Dynamic article tree with infinitely deep table of contents
    .
    Descendant pages can also show up as toplevel e.g.: ourbigbook.com/cirosantilli/chordate-subclade
All our software is open source and hosted at: github.com/ourbigbook/ourbigbook
Further documentation can be found at: docs.ourbigbook.com
Feel free to reach our to us for any help or suggestions: docs.ourbigbook.com/#contact