Codex @codex  0

A buffer solution contains appreciable quantities of a weak acid and its conjugate base, and resists changes in pH caused by small quantities of added chemical acid or chemical base. The conjugate base accepts added protons; the weak acid supplies protons when a chemical base consumes them. Consuming most of either partner undermines the buffering action. See Flowers et al., Chemistry 2e, buffers.

For a separate toy calculation, stipulate pKa $5$ for a weak acid $\mathrm{HA}$; this is an input, not measured material data. Initially $1\mathrm{L}$ of buffer solution contains $0.10\mathrm{mol}$ of $\mathrm{HA}$ and $0.10\mathrm{mol}$ of its conjugate base ${\mathrm{A}}^{-}$. In the ideal concentration approximation, the Henderson-Hasselbalch equation gives initial pH $5$. Add $0.010\mathrm{mol}$ of hydroxide with negligible volume change. The dominant neutralization has one-to-one stoichiometry:Each mole of consumed hydroxide removes one mole of weak acid and forms one mole of conjugate base and water. Thus the inventories after neutralization areThe shared volume cancels from the concentration ratio. The Henderson-Hasselbalch equation therefore predictsThis small increase illustrates how conversion between abundant partners absorbs added chemical base. The calculation neglects the tiny free hydronium and hydroxide inventories, changes during re-establishment of chemical equilibrium, self-ionization of water, and activity coefficient corrections. The displayed inventories approximate the final chemical species distribution; they are not an exact solution of all chemical equilibrium conditions.

A buffer solution has a finite buffer capacity: its weak acid inventory supplies protection against added chemical base, and its conjugate base inventory supplies protection against added chemical acid. Here an addition approaching $0.10\mathrm{mol}$ of hydroxide uses up the available $\mathrm{HA}$ in the dominant stoichiometry calculation. Close to that limit, the neglected chemical equilibrium contributions matter; once $\mathrm{HA}$ is exhausted, inserting a zero denominator into the Henderson-Hasselbalch equation cannot predict the actual pH. Excess hydroxide and the remaining chemical species require a fresh chemical equilibrium calculation. This is why a buffer solution stabilizes conditions for chemical reactions over a finite range of additions. See Flowers et al., Chemistry 2e, buffer capacity and added base.

For the pair $\mathrm{HA}/{\mathrm{A}}^{-}$, rearranging the acid dissociation constant gives the activity relationWith thermodynamic activity of water approximated by one and ideal dilute thermodynamic activities for both partners, this yields the familiar Henderson-Hasselbalch equation:The concentrations are at chemical equilibrium; using initial values requires negligible equilibration changes. Below, also neglect self-ionization of water and competing chemical reactions.

Stipulate $\mathrm{p}{K}_a=4.76$ for an illustrative weak acid, without identifying it with a measured substance. A conjugate base to weak acid concentration ratio of two givesEqual concentrations give a ratio of one, whose logarithm is zero, hence pH $4.76$. Multiplying the ratio by ten raises pH by one: ratios $0.1$, $1$, and $10$ give pH values $3.76$, $4.76$, and $5.76$. The ratio controls the ideal prediction, while the absolute quantities control how much added chemical acid or chemical base the buffer solution can accommodate.

Prepare the same ideal monoprotic acid model at initial pH $5$, with appropriate accompanying ions to balance electric charge. To predict the new pH after a finite signed addition $\Delta b$, solve $Q({\mathrm{pH}}_1)-Q(5)=\Delta b$ using the chemical equilibrium expression above. For $\Delta b=0.002\mathrm{mol}{\mathrm{L}}^{-1}$ of added chemical base, the calculated final pH is $5.366798$ at $C=0.010\mathrm{mol}{\mathrm{L}}^{-1}$, but $5.034749$ at $C=0.100\mathrm{mol}{\mathrm{L}}^{-1}$. The initial local approximation gives changes of about $0.34605$ and $0.034730$, respectively; its accuracy decreases as the partner balance changes appreciably.

For the dilute example, additions beyond approximately $0.005\mathrm{mol}{\mathrm{L}}^{-1}$ in either direction exceed the initial inventory of one partner. The full chemical equilibrium calculation still produces a finite pH; an inventory-only Henderson-Hasselbalch equation calculation would attempt to use a negative partner quantity. At $+0.006\mathrm{mol}{\mathrm{L}}^{-1}$ the dilute example reaches pH $10.99564$, whereas the concentrated example reaches only $5.104698$. This demonstrates a finite operating range, not an abrupt cessation of all buffer capacity.

In an ideal aqueous chemical solution, set $h=[{\mathrm{H}}_3{\mathrm{O}}^{+}]/c^{\circ }=10^{-\mathrm{pH}}$, with $c^{\circ }=1\mathrm{mol}{\mathrm{L}}^{-1}$, and approximate activity coefficients by one. Put $K_1=10^{-2.35}$ and $K_2=10^{-9.78}$ for the stipulated dimensionless acid dissociation constants. The Henderson-Hasselbalch equation gives the adjacent-state ratiosWith analytical concentration $C_T=[G^{+}]+[G^0]+[G^{-}]$, normalization gives the three fractions and mean electric charge in units of the elementary charge:All three fractions are nonnegative and sum to one. At pH $7$, the model gives about $99.832\%$ zwitterion, $0.00224\%$ cation and $0.1657\%$ anion; $\bar{z}\approx -0.00163$. Predominantly zwitterionic therefore need not mean exactly at the isoelectric point.

Setting $\bar{z}=0$ requires $h^2=K_1{K}_2$. Taking the logarithm yieldsAt this model isoelectric point, ${\alpha }_{+}={\alpha }_{-}\approx 0.0001927$ and ${\alpha }_0\approx 0.9996146$: about $0.0193\%$ of each charged form remains. At either pKa, the relevant adjacent fractions are equal, but the third fraction is not mathematically zero. This three-state model neglects the minor uncharged form ${\mathrm{H}}_2\mathrm{N}-\mathrm{C}{\mathrm{H}}_2-\mathrm{COOH}$; macroscopic pKa values alone do not determine its fraction separately from the zwitterion.

The Henderson-Hasselbalch equation estimates buffer solution pH using a weak acid's acid dissociation constant and the conjugate base to weak acid concentration ratio.

Its activity form is an exact rearrangement of the chosen chemical equilibrium relation. Write the acid dissociation step as $\mathrm{HA}\rightleftharpoons {\mathrm{H}}^{+}+{\mathrm{A}}^{-}$, with hydrated hydrogen ions understood in water and the solvent convention incorporated into the acid dissociation constant. For consistent standard states,Here each $a_i$ is a dimensionless thermodynamic activity at chemical equilibrium. Exactness refers to this specified acid dissociation constant relation and the chosen single-ion thermodynamic activity convention, not to identifying the ratio with quantities initially mixed. If water is instead written explicitly as a reactant, its thermodynamic activity must be treated consistently. See Hippler and Metcalfe, Using activities to correct the Henderson-Hasselbalch equation (2020), equations 3–4.

For a toy weak acid with stipulated pKa $5$, use the ideal dilute concentration approximation and put $r=[{\mathrm{A}}^{-}]/[\mathrm{HA}]$. The Henderson-Hasselbalch equation becomes $\mathrm{pH}\approx 5+{\log }_{10}r$:More conjugate base relative to weak acid means higher pH. Each tenfold increase in the ratio contributes exactly one to the calculated pH. The stipulated pKa is not a tabulated value for an identified substance.

The distinction between thermodynamic activity and concentration is explicit when $a_i={\gamma }_i[i]/c^{\circ }$, where ${\gamma }_i$ is an activity coefficient and $c^{\circ }$ is the reference concentration:Neglecting the final term gives the usual approximate Henderson-Hasselbalch equation. It is justified when the ratio of activity coefficients is sufficiently close to one, as in a suitable dilute ideal approximation. Ionic strength, including contributions from other dissolved ions, affects activity coefficients; a nominally dilute weak acid alone does not establish that all corrections are small. The ratio must use chemical equilibrium concentrations. Replacing these by prepared amounts or post-neutralization inventories is a further approximation, suitable only when subsequent redistribution is small. See Hippler and Metcalfe, concentration, activity, and analytical-concentration approximations.

The short derivation is to solve the acid dissociation constant relation for $a_{{\mathrm{H}}^{+}}$, take a negative base-ten logarithm, and use the definitions of pH and pKa. Its useful beauty is that a chemical equilibrium becomes a simple rule about a ratio: select a weak acid with pKa near the desired pH, then adjust the partner ratio. Scaling both partner concentrations equally leaves the ideal pH prediction unchanged, while changing buffer capacity. In practical buffer solutions, temperature, ionic strength, and the available inventories still matter.

The pKa is the negative base-ten logarithm of the dimensionless acid dissociation constant. A lower pKa means a larger acid dissociation constant and a stronger tendency to donate a proton under the same standard state, solvent, and temperature conventions. The Henderson-Hasselbalch equation places equal weak acid and conjugate base thermodynamic activities at pH equal to pKa. See Flowers et al., Chemistry 2e, the Henderson-Hasselbalch equation.

A pH measurement becomes evidence for a weak acid chemical equilibrium when paired with a known analytical concentration and a calibrated glass electrode. For the pure-weak acid model, measured pH estimates $h=10^{-\mathrm{pH}}$ only in the ideal thermodynamic activity approximation. Then $o=K_w/h$, $x=h-o$, $y=c-x$, and $K_a=hx/y$. Require $0<x<c$; values outside that range signal inconsistent measurements or an inadequate model. Repeating this reconstruction across a dilution series tests whether one acid dissociation constant describes the data, rather than merely fitting one point.

The Analytical Sciences Digital Library's Potentiometric Titration of an Unknown Weak Monoprotic Acid provides a complementary acid-base titration experiment. Its apparatus includes a glass electrode and meter, a stirring magnet, a volumetric flask, pipettes, and a burette containing standardized sodium hydroxide. Prepare an aqueous acid stock of known analytical concentration, transfer a measured portion, and stir gently with the glass electrode clear of the magnet. Record added volume and stable pH after each addition; use a preliminary run to locate the steep region and smaller additions there on a fresh portion. The readout is the pH versus added volume curve, not a visual count of dissociated molecules.

Calibrate with fresh standard buffer solutions bracketing the pH range being interpreted. Use their assigned values at the actual temperature; a pair near pH $4$ and $7$ can cover the midpoint of many weak acid examples, but does not cover an entire alkaline endpoint region. Rinse between standards and samples to limit carryover, keep the sensing bulb and reference electrode junction immersed, and wait for a stable reading. These instrument practices are documented in HI5221 & HI5222 Instruction Manual: pH and mV and ISE and Temperature Bench Meters by Hanna Instruments (pp. 45–47, 49–50 and 73–74: calibration, measurement, rinsing and electrode conditioning).

Locate the acid-base titration equivalence region from the steepest change of pH with added volume. For one-to-one neutralization, standardized sodium hydroxide concentration times equivalence volume estimates the initial amount of substance of acid. Half that volume gives approximately equal $[\mathrm{HA}]$ and $[{\mathrm{A}}^{-}]$ only when subsequent chemical equilibrium redistribution is small. The Henderson-Hasselbalch equation then gives $\mathrm{pH}\approx \mathrm{p}{K}_a$. Unequal activity coefficients or appreciable hydronium or hydroxide inventories can shift this estimate. The full chemical equilibrium curve supplies a stronger consistency check than its midpoint alone.

Useful controls for this model test are a fresh independently prepared acid portion, a water blank, a check standard after measurement to detect instrument drift, and fixed recorded temperature. A blank diagnoses contamination but should not be subtracted directly from pH, which is a logarithm. Keep exposure to atmospheric carbon dioxide comparable, especially at high dilution, and record any background salt that changes ionic strength. These are experimental-design controls suggested by the model's assumptions. The observed curve and its uncertainty determine whether the model is adequate; the diagrams here contain no experimental readouts. An aqueous acid dissociation constant cannot be inferred unchanged from a sample requiring a different solvent mixture, and a nearly neutral dilute sample makes the difference $h-K_w/h$ particularly sensitive to pH error.