In stable density stratification, ambient density decreases with height. A rising buoyant thermal encounters progressively lighter surroundings and entrains denser fluid from below, so its net buoyancy decreases. It reaches neutral buoyancy, overshoots through its remaining momentum, and eventually stops rising, spreads as a buoyant intrusion or excites internal gravity waves. The finite rise is a consequence of this restoring effect, not just drag.
Total buoyancy has dimensions and buoyancy frequency has . For an ideal point release with no other dimensional source length or time, dimensional analysis therefore gives
The dimensionless coefficient depends on entrainment coefficient, shape and the momentum model. A finite source radius or impulse supplies additional dimensionless parameters; dimensional analysis cannot determine the coefficient by itself.
Within precisely the spherical model, and the evolving thermal buoyancy satisfies , so . Neutrality occurs at . For , the momentum equation and give
The first nonzero-height stopping point is , so . This illustrates both the dimensional scale and the distinction between neutral height and maximum rise; the precise coefficients rely on the specified ideal fluid entrainment and impulse model.
Let and . The four balances describe, respectively, fluid entrainment through the spherical surface at normal speed , the increase of vertical momentum due to buoyancy, conservation of total buoyancy in a uniform ambient, and motion of the thermal centre. Entrained ambient fluid initially has no vertical momentum, so the momentum equation includes the inertia needed to accelerate it. This model neglects added mass and drag; these effects would alter the numerical similarity coefficients.
With , the Boussinesq approximation replaces inertial density by while retaining the density difference in buoyancy. Take to this accuracy. Then
For a point source, and the initial integrated impulse is zero. Therefore and . Integrating yields
The mass density follows from conserved buoyancy:
Thus the radius and rise height grow as , the rise speed decays as , and the density deficit decays as . In height coordinates, put and ; then and .
If a reference density different from the inertial ambient density is retained, : replace in the kinematic formulas by , while retaining the original in the density-deficit formula. This keeps reference-density normalization separate from the physical acceleration.
The point-source spherical thermal similarity is singular at and cannot satisfy the small-density-difference condition arbitrarily close to its formal origin. A finite-radius, zero-impulse regularization has and , with . This displays the required initial data rather than attributing the singularity to a physical infinite initial speed.
The undisturbed reservoir remains at , , while the particle budget gives . The edge of the rarefaction wave advancing into that reservoir travels with the local left-running characteristic speed, . Thus
This is the disturbance head into the initially resting reservoir, also called the leading edge of the rarefaction wave; it reduces to as . The rightmost fan/shelf junction is the rarefaction tail, not this reservoir edge. Its trajectory in the full sedimenting system cannot be obtained by retaining the constant-buoyancy Riemann invariants.
For the requested near-front approximation, hold fixed and take the shelf's concentration initially to be . The locally uniform shelf approximation gives , so
This tends to at small settling and predicts a finite limiting front location within the fixed-depth closure. It is not an exact solution of the spatially varying variable-buoyancy shallow water equations: different material histories and resulting buoyancy gradients eventually invalidate a perfectly uniform shelf. No exact finite-time stoppage is claimed.
Without settling, and . The left-running rarefaction wave has the unchanged Riemann invariant and similarity coordinate . Hence
Matching to the Froude number condition gives
The full outer profiles are for ; the displayed fan for ; and for , where
Ahead of there is only ambient fluid, so the particle-laden layer has zero depth. The shelf width is for every finite positive . It disappears only in the formal dry-front limit, where . For , the fan/shelf junction lies to the left of the initial barrier; the profiles remain consistent. This is the finite-Froude lock-release rarefaction, valid while the reservoir can be treated as semi-infinite.
Figure 1.
Lock-release depth and velocity profiles, with settling attenuation of the reservoir disturbance and approximate front
. Details.
Close the unresolved head of the gravity current by
Here the speed is measured relative to the resting deep ambient, and are the depth and reduced gravity immediately behind the head. The Froude number expresses conversion of the head's hydrostatic pressure head into motion and depends on the ambient-depth ratio and head physics.
A front condition can be motivated by a steady control volume in the front frame: balance mass conservation, momentum conservation and the upstream/downstream Bernoulli equation, with a stagnation region and the appropriate ambient return flow. Assumptions include small density contrast, approximately hydrostatic far fields, negligible imposed ambient current, specified far-field depths, and a prescription for any mixing or energy loss. Viscous/turbulent head structure and finite-depth return flow change ; it is not fixed by the outer one-layer equations alone. A deep-ambient ideal head often motivates a constant order-one value, but no numerical choice is needed here.
The shallow-water approximation fails locally in the head because its vertical and horizontal dimensions are comparable and vertical accelerations are appreciable. The Froude number closure is a boundary condition for the outer shallow water equations, not a claim that they resolve the front itself.
Put and , the reduced gravity. Use the Boussinesq approximation, hydrostatic pressure, uniform vertical velocity and concentration profiles, negligible fluid entrainment and drag, and a flat bed. Integrating volume conservation, momentum conservation and the particle budget over the layer gives
The hydrostatic pressure resultant is ; the last right-hand side is the deposition flux. With , these are
The quasilinear coefficient matrix in variables is
Its eigenvalues are , where . Therefore the characteristic curves and their compatibility ordinary differential equations are
For the last equation the left eigenvectors are , and multiplying the quasilinear equations by them gives the displayed source terms. This is the sedimenting rectangular-channel characteristic compatibility relation; it supplies one differential relation on each wave family, rather than three independently closed scalar equations there. The contact eigenvector has and . For reference, an equivalent form is
Only for constant without settling do become genuine Riemann invariants. With settling, the spatial buoyancy gradient cannot be silently omitted.
Vertical turbulence carries particles upward as well as downward. Its mixing time should be short relative to the settling time ; hence is a useful well-mixed criterion, subject also to the eddy correlation time and particle response time. A more resolved description balances turbulent diffusion against downward settling velocity. A nearly uniform interior concentration does not eliminate the downward drift.
At an absorbing bed, particles crossing the boundary settle and do not return unless sediment resuspension is separately supplied. With well-mixed concentration , the particle volume deposition flux is per unit horizontal area. Thus stirring can preserve an almost uniform suspension while its total particle content decreases. The present model neglects sediment resuspension and any significant change of bulk fluid volume due to the dilute particles.
A linear, or “three-thirds”, boundary heat transfer closure needs its own dimensional conductance , so . One cannot simply keep the dimensions of the previous nonlinear coefficient . With equal conductances at both boundaries, the mean-temperature equation becomes
Integrating this linear ordinary differential equation gives
The relaxation time is . If the conductances differed, conservation of energy would instead select their weighted boundary temperature; the arithmetic mean follows from the assumed upper/lower symmetry.
Let , with . Apply the same one-boundary four-thirds convective heat-transfer law coefficient to both boundary layers. The lower inward heat flux is and the upper outward heat flux is . The layer's conservation of energy per unit area gives
Here is the volumetric heat capacity. This uses a uniform bulk temperature, negligible boundary layer heat storage, constant depth and material properties, prescribed boundary temperatures, no lateral losses or internal heat generation, and identical upper and lower closure coefficients. It deliberately extrapolates the turbulent closure to , as the model requires; an actual impulsive start first has a conductive transient. This is the requested evolution equation, without solving it.
Write for the thermal expansion coefficient, for kinematic viscosity, for thermal diffusivity, and for thermal conductivity. For a temperature difference across depth ,
The four-thirds convective heat-transfer law posits at high Rayleigh number, and therefore
The layer depth cancels. A useful physical justification is a mixed interior with thin conductive boundary layers of thickness , each maintained near a fixed critical local Rayleigh number: and . Eliminating gives the exponent . Whether denotes the whole-layer contrast or the drop across one boundary layer changes the coefficient, not the exponent.
Assume Boussinesq approximation, constant material properties, a laterally extensive statistically turbulent Rayleigh-Bénard convection layer, negligible side-wall heat transfer, no rotation or imposed shear, approximately uniform bulk temperature, and the same specified Prandtl number regime when choosing . The closure is empirical and regime dependent; high Rayleigh number alone does not make it exact or extend it to the impulsive conductive initial transient.
Before surface-wave breaking or reflected waves return, the shallow water equations are and . Set and . Their Riemann invariants are along . An outgoing simple wave entering resting water has , so the imposed boundary velocity gives
This formula requires and an appropriate inflow/outflow characteristic curve count. In particular ensures that only the outgoing family enters the domain throughout the cycle; stronger forcing can change the boundary problem.
A characteristic curve emitted at time carries constant and and follows
Increasing boundary velocity produces faster following characteristic curves, steepening the advancing side of a crest; decreasing boundary velocity spreads the curves and produces a rarefaction wave. A trough has reduced depth and smaller propagation speed. Once the compressive curves intersect, the single-valued simple wave must be replaced by an admissible hydraulic bore, with mass conservation and momentum conservation across it and loss of mechanical energy. In a very weak or dispersive wavetrain an undular bore can replace the ideal discontinuity.
For a bore of speed entering undisturbed depth , the Rankine-Hugoniot condition gives and . If is its depth just behind, elimination of the behind-bore velocity yields and . Thus the newly formed front travels faster than , carries a depth jump, and dissipates energy; the behind-bore state must satisfy these balances rather than continuing intersecting smooth curves. The final sketch is schematic and does not claim a solved post-breaking boundary-value problem.
There is a numerical defect in the printed leading-edge claim. The first leading edge is the curve . The envelope condition gives
At the leading edge,
This follows directly from the specified boundary acceleration and the exact Riemann invariant. The printed coefficient is incompatible with these data: at that distance the leading-edge characteristic curves have not yet intersected. For the first compression interval, , one has . Consequently , so the first envelope occurs at . This boundary-driven shallow-water wave steepening calculation also establishes that no later characteristic in the initial compression forms a bore earlier.
Figure 1.
Outgoing shallow-water characteristics and profiles before the leading-edge bore
. Details.
Use incompressibility, negligible viscosity and surface tension, and an initially irrotational flow. Take the undisturbed free surface at and bed at . The velocity potential satisfies Laplace equation and . For a Fourier mode, write
The linear kinematic boundary condition and linear Bernoulli equation at the free surface are and . Eliminating gives the surface gravity wave dispersion relation
The rightward phase velocity and group velocity are
The phase velocity transports a crest; the group velocity transports a narrow-band envelope and its leading-order energy. For , and : deep-water surface gravity waves are dispersive. For , and , the nondispersive shallow-water dispersion relation. The boundary velocity controls the excited amplitude; it does not change the linear dispersion relation.
Use the meridional overturning streamfunction convention
Differentiating geostrophic and hydrostatic balance gives the thermal wind relation . Differentiate it in time and use the mean momentum and density equations. The resulting diagnostic elliptic boundary value problem is
For the transformed circulation it becomes the Eliassen equation for residual circulation, with signs appropriate to the convention above:
At the rigid meridional walls, impermeability requires each streamfunction to be constant along each wall. Set those constants to zero, choosing the solution with no imposed net vertical throughflow. Since the prescribed density flux vanishes at both walls, the same conditions apply to .
There is a genuine data limitation: prescribing alone does not prescribe . The term remains in both circulation equations. To give the usual explicit step-flux circulation, assume vanishing meridional momentum-flux divergence, , with no independently imposed circulation. The formulas below are conditional on that assumption, not a unique consequence of the density flux alone.
Let , and , using the flux unit in which its lower plateau is . The bounded solution has . Its vertical equation is
At vertical infinity require bounded Eulerian flow and vanishing residual flow. Requiring the Eulerian vertical velocity to vanish also at lower infinity would be inconsistent with the continuing lower-region flux divergence. At , continuity of and follows because the forcing has a step but no delta function. The step-flux residual circulation in a stratified channel is therefore
Here , because below zero and vanishes above it. The residual streamfunction decays at both infinities, whereas the Eulerian streamfunction tends to below and to zero above.
For , the Eulerian velocity is
The flow descends near the wall and rises near , with a negative meridional return flow concentrated near . Below the dissipation level its vertical flow balances the continuing divergence of eddy density transport. There is no independently added throughflow, but opposing vertical transports at lower infinity are required by this idealized forcing.
Away from the discontinuity the residual meridional velocity equals the Eulerian value, while
Thus the residual mean circulation forms two oppositely rotating cells, confined within vertical distance of the termination of the wave flux. Its streamfunction jumps by at zero. Distributionally this supplies the horizontal return transport
The Dirac delta sheet is a consequence of the discontinuous imposed flux, not an extra boundary condition. Smoothing the flux termination replaces it by a thin finite return current. Streamlines must not be drawn as continuously crossing the jump without that transport.
The physical Eulerian mean flow is continuous. In the transformed momentum equation, the sheet contribution to cancels the sheet in the flux divergence, leaving the smooth mean acceleration
Thus termination of the vertical Eliassen–Palm flux produces a finite column-integrated wave drag, redistributed over depth by the residual mean circulation.
Figure 1.
Eulerian and residual circulations for zero momentum-flux divergence; the residual flux-termination sheet closes two opposite cells
. Details.
For completeness, the general bounded response can be calculated without setting to zero. Expand in wall-compatible sine modes, with coefficients , and . Add to either displayed streamfunction the same correction
for decaying momentum-flux forcing. The Green function sign follows from .
An explicit counterexample to uniqueness is the additional momentum flux , with . It vanishes at both walls and leaves the prescribed density flux unchanged. For it adds
to both circulations. This nonzero bounded, wall-impermeable solution verifies that the original mean equations need an additional momentum-flux specification to select a unique sketch.
For the two semi-infinite cracks, choose instead
with cuts on the two crack segments. Approaching from above gives
These opposite signs on the two cracks are essential. Multiplying the Hilbert problem for an antiplane crack by gives
The Sokhotski–Plemelj theorem therefore yields the antiplane ligament Cauchy solution
For , and the kernel has no pole on either crack. Hence
Again this is the additional stress, and on the intact ligament. The integrals have the Cauchy principal value interpretation wherever required, and their convergence at infinity is assumed. For a point on the right crack, the upper value of has imaginary part ; division by gives real part . On the left crack both signs reverse and the same cancellation follows.
The homogeneous ambiguity here is physically different from the finite-crack displacement period. A real term
has zero real traction on the crack faces but adds ligament shear with resultant
Its potential is , producing logarithmic displacement growth at infinity. Thus it represents a separately imposed load transfer between the two sides, even though its stress tends to zero pointwise at infinity. The induced correction with no added remote resultant selects , giving the boxed formula. Merely requiring pointwise decay of stress would not fix this constant; the far-field load normalization is needed.
For the finite crack use the branch
cut on . For , its limiting values are and . Consequently converts the sum condition of the Hilbert problem for an antiplane crack into an additive jump:
By the Sokhotski–Plemelj theorem, the Cauchy integral with this jump is
Thus the finite antiplane crack Cauchy solution is . For regular integrable loading, and . A homogeneous term would instead produce a logarithmic potential. In the reflected real-loading class is real, and its term gives a nonzero displacement period around the crack. It is excluded for the induced, dislocation-free correction. A nonvanishing constant stress term would change the remote applied field and is likewise excluded.
For , , so
This is the additional stress, not the total stress; the applied field must still be added. The integral is real at these intact-axis points, so . On the crack itself, the upper Cauchy principal value formula gives . Division by verifies , checking the sign of the face traction cancellation.
For example, constant applied shear gives and . The total shear ahead of the crack is then , providing a direct check of the normalization and the crack-tip singularity.
At a fixed material point, freeze the incremental elastic moduli at their local values and fix a unit propagation direction . For an arbitrary nonzero polarization , the rank-one matrix annihilates the added quadratic minor null Lagrangian, since
The assumed positivity therefore gives
Thus the acoustic tensor is positive-definite; this is strong ellipticity in elasticity. Major symmetry also makes it a real symmetric matrix. By the spectral theorem for real symmetric matrices, it has three real positive eigenvalues and an orthonormal basis of real polarizations . Therefore
Each polarization gives a real plane wave profile through the equation of part (a), in either sign of the propagation speed. Repeated eigenvalues still admit three independent polarizations; the claim is not that the three speeds must be distinct. For an inhomogeneous base deformation these are local, frozen-coefficient wave modes, rather than exact plane waves throughout the entire body.
The fixed-displacement boundary value problem now has on the whole boundary. The elastic normal-mode energy identity still holds, because its boundary term contains . Define
For real constant , has major symmetry: both Levi-Civita symbols change sign upon exchanging the two index pairs. Its quadratic density is a quadratic minor null Lagrangian. Indeed,
The boundary integral vanishes by the Dirichlet boundary condition, and the volume integral vanishes because mixed derivatives are symmetric in whereas is antisymmetric. Constancy of is essential: otherwise its derivatives would produce extra terms. This calculation initially applies to smooth fields and extends to fields with zero Sobolev boundary trace by density.
It follows that the Rayleigh quotient numerator can be replaced by the quadratic form with :
The assumed positivity of on all nonzero real matrices also gives positivity on nonzero complex matrices by splitting real and imaginary parts. A nonzero satisfying on the boundary cannot have identically zero gradient. Hence the right side is strictly positive, and
This works even when the original moduli quadratic form is not pointwise positive on all matrices: its integrated energy on fixed-boundary gradients agrees with a positive density after adding the quadratic minor null Lagrangian.
For a static base state under dead loading, put and take zero incremental body force and traction. The admissible squared frequencies are the eigenvalues of the weighted boundary value problem
Multiply by and integrate over the reference body. The boundary term in integration by parts vanishes, giving the elastic normal-mode energy identity
For a nonzero mode and positive mass density, the denominator is real and positive. The numerator is real by major symmetry of the incremental elastic moduli. Explicitly, if with real , the two imaginary cross terms cancel, leaving the sum of the quadratic energies of and . Consequently every admissible is real. A negative value, when allowed by indefinite moduli, corresponds to exponential growth or decay rather than an oscillation with real frequency.
If the moduli quadratic form is strictly positive on every nonzero real matrix, that same decomposition shows that the numerator is positive whenever is nonzero. Thus for every nontranslation mode. Under the usual assumptions of a bounded connected body, regular coefficients and uniform positivity, the Rayleigh quotient defines a self-adjoint operator with discrete positive squared frequencies on the mass-weighted mean-zero displacement space. Its eigenfunctions give the nontrivial small harmonic oscillations.
There is an unavoidable zero-frequency qualification for the pure traction problem as printed: , for any nonzero constant vector , has zero gradient, zero incremental nominal stress and . These three constant translations obey all the homogeneous incremental boundary conditions. Under the strict quadratic-form hypothesis they are the entire zero eigenspace on a connected body. Therefore the unrestricted conclusion is
Strict positivity for every nonzero displacement requires excluding these modes, for example by imposing , or by adding a displacement constraint. If harmonic perturbations are defined to have nonzero frequency from the outset, the requested positivity holds for all those perturbations.
For a uniform material and an affine static base deformation, the deformation gradient, incremental elastic moduli and reference mass density are constant. With zero incremental body force, the equation reduces to . Let be a unit material propagation direction, a constant polarization and . Direct differentiation of the plane wave gives
Thus every twice differentiable profile satisfies the incremental equation if
This is the acoustic tensor eigenvalue problem. The acoustic tensor is a real symmetric matrix: interchange the index pairs in the incremental elastic moduli and then interchange the dummy material indices to obtain . Its eigenvectors give the displacement polarizations. A positive eigenvalue gives a real nonzero speed ; arbitrary-profile propagation imposes precisely this algebraic condition. Boundary conditions determine which combinations of these local plane waves are allowed in a finite body.

Pinned article: Introduction to the OurBigBook Project

Welcome to the OurBigBook Project! Our goal is to create the perfect publishing platform for STEM subjects, and get university-level students to write the best free STEM tutorials ever.
Everyone is welcome to create an account and play with the site: ourbigbook.com/go/register. We belive that students themselves can write amazing tutorials, but teachers are welcome too. You can write about anything you want, it doesn't have to be STEM or even educational. Silly test content is very welcome and you won't be penalized in any way. Just keep it legal!
We have two killer features:
  1. topics: topics group articles by different users with the same title, e.g. here is the topic for the "Fundamental Theorem of Calculus" ourbigbook.com/go/topic/fundamental-theorem-of-calculus
    Articles of different users are sorted by upvote within each article page. This feature is a bit like:
    • a Wikipedia where each user can have their own version of each article
    • a Q&A website like Stack Overflow, where multiple people can give their views on a given topic, and the best ones are sorted by upvote. Except you don't need to wait for someone to ask first, and any topic goes, no matter how narrow or broad
    This feature makes it possible for readers to find better explanations of any topic created by other writers. And it allows writers to create an explanation in a place that readers might actually find it.
    Figure 1.
    Screenshot of the "Derivative" topic page
    . View it live at: ourbigbook.com/go/topic/derivative
  2. local editing: you can store all your personal knowledge base content locally in a plaintext markup format that can be edited locally and published either:
    This way you can be sure that even if OurBigBook.com were to go down one day (which we have no plans to do as it is quite cheap to host!), your content will still be perfectly readable as a static site.
    Figure 5. . You can also edit articles on the Web editor without installing anything locally.
    Video 3.
    Edit locally and publish demo
    . Source. This shows editing OurBigBook Markup and publishing it using the Visual Studio Code extension.
  3. https://raw.githubusercontent.com/ourbigbook/ourbigbook-media/master/feature/x/hilbert-space-arrow.png
  4. Infinitely deep tables of contents:
    Figure 6.
    Dynamic article tree with infinitely deep table of contents
    .
    Descendant pages can also show up as toplevel e.g.: ourbigbook.com/cirosantilli/chordate-subclade
All our software is open source and hosted at: github.com/ourbigbook/ourbigbook
Further documentation can be found at: docs.ourbigbook.com
Feel free to reach our to us for any help or suggestions: docs.ourbigbook.com/#contact