For an isotropic Newtonian fluid in incompressible flow, the constitutive equation isHere is pressure, is the Kronecker delta, is the constant dynamic viscosity, and is the strain-rate tensor. The more general compressible constitutive equation can include a term proportional to ; that term vanishes here.
Differentiate the Cauchy stress tensor, retaining the constant dynamic viscosity outside the derivatives:The last equality uses incompressibility. Substitution into the Cauchy momentum equation gives the Navier-Stokes equationThe pressure gradient and the Laplacian of the velocity field therefore give the two contact force densities in this model.
For an arbitrary material volume , Newton's second law equates the rate of change of linear momentum to the resultant contact force, since there is no body force:Use the Reynolds transport theorem on the left. Expanding the product and using the continuity equation leavesOn the right, the divergence theorem applied to each row of the Cauchy stress tensor givesConsequently the volume integral of vanishes on every material volume. Localizing as in part (i) gives the Cauchy momentum equation:The left side is mass density times material acceleration; the right side is the divergence of the Cauchy stress tensor.
At an oriented internal surface with unit normal vector , the traction is the limiting contact force per unit surface area exerted by the material on the positive- side on the material on the negative- side:For a boundary of a chosen material volume, this convention gives the external traction when is outward. The Cauchy stress tensor has componentsso the second index specifies the surface orientation and the first specifies the force component. The vectors form the standard Cartesian coordinate system basis of unit vectors.
Cauchy's stress theorem states that the dependence of traction on the normal vector is linear:Repeated indices are summed according to Einstein notation. In particular, reversing the normal vector reverses the traction, and knowing the tractions on three mutually perpendicular coordinate planes determines the traction on every plane. Symmetry of the Cauchy stress tensor, for an ordinary fluid without body couples, follows separately from angular momentum conservation.
Let have a boundary moving with velocity , and let be its outward unit normal vector. For a smooth scalar field , the Reynolds transport theorem isIn the last expression, extend smoothly into and use the divergence theorem. For a material volume, its boundary moves with the fluid velocity , so . Equivalently, the Reynolds transport theorem for a material volume readswhere is the material derivative.
For an arbitrary moving region, mass conservation includes the relative mass flow rate across its boundary:Substitution of the Reynolds transport theorem and the divergence theorem givesSince the region is arbitrary, a continuous integrand must vanish: if it had a positive or negative value at a point, a sufficiently small surrounding region would have an integral of the same sign. This gives the continuity equation. With constant positive mass density , it reduces toThus the flow is incompressible. For a material volume, the same argument starts directly from conservation of its total mass, with zero relative boundary flux.
Use compatible edge identifications: choose a bijection between the three boundary vertices of and those of , and extend it linearly on each edge. This defines a simplicial homeomorphism of the two boundary circles. This compatibility is the usual meaning of gluing the two boundary triangles; independently chosen edge reversals need not agree at their endpoints. The classification needed here is 3(a)(iv); the printed reference to 3(a)(iii) is a source error.
Delete the two triangular simplexes but retain all their proper faces of a simplex, and identify the two resulting boundary simplicial subcomplexes by this map. The result is a finite abstract simplicial complex : vertices from different sides are identified only in the boundary, and the only shared edges are boundary edges. There is no triangle consisting of all three boundary vertices after the two faces have been removed. Consequently no other simplexes become duplicates. Its geometric realization has the specified quotient topology and is homeomorphic to .
We check the closed combinatorial surface conditions. Away from the seam, vertex links of a simplex remain cycle graphs. At a boundary vertex of or , removing the face changes its link from a cycle graph to a graph path, with endpoints corresponding to its two boundary edges. Gluing the boundaries identifies the two paths' respective endpoints, making one cycle graph. Each seam edge now meets one triangle from and one from , and all other edges retain their original two incident triangles. Thus every vertex link is a cycle graph and every simplex lies in a triangle. The simplicial complex is connected, since the two connected punctured surfaces meet along their boundary circle. Hence is a closed combinatorial surface.
This construction is the connected sum of surfaces . For completeness, compute its Euler characteristic directly. Removing a triangular face while retaining its edges and vertices subtracts one, soGluing identifies three vertex pairs and three edge pairs, givingFor the explicit triangulations above, this is also .
Finally is a nonorientable surface. If were orientable, its restriction would make orientable. The consistent choices of orientation of a simplex on its triangles extend across a capping disc: choose the cap's orientation of a simplex so that the induced directions on the common boundary oppose. Capping by would therefore make the real projective plane orientable, a contradiction. The obstruction to orientability in the real projective plane can also be seen from a Möbius band neighbourhood of a projective line.
By the classification theorem for closed combinatorial surfaces, a nonorientable surface with Euler characteristic has , hence . Therefore
Use the same square grid with four centre-based triangles per small square, but identify boundary points byThis gives the real projective plane. To see the model explicitly, a radial homeomorphism from the square, centred at , to the closed disc carries the boundary involution to the antipodal map. The map from that disc to the projective planeis continuous and surjective: every one-dimensional vector subspace of has a unit vector representative in the closed upper hemisphere. Its only identifications are antipodal boundary points. The compact-to-Hausdorff continuous bijection theorem therefore identifies this disc quotient space with .
The square triangulation descends to an abstract simplicial complex . Small-square centres remain distinct interior vertices; each triangle has one centre and two adjacent grid vertices. Boundary pairings identify whole grid edges, while preserving distinct vertices in each triangle, so this is a finite triangulation of the real projective plane. Its counts are vertices, edges and triangles, giving Euler characteristic one.
Choose to be the interior triangle with vertices , and . Removing its relative interior and cutting from to gives the same nine-sided cut disc as before. Parametrize it by a convex polygon, transporting the boundary identifications. Its boundary word is nowThe boundary involution pairs the two sides and the two sides in matching traversal directions; the pair restores the slit. Leave unpaired. The quotient space isthe real projective plane with an open disc removed. In particular it is a compact connected surface with boundary consisting of one three-edge circle.
We construct both the required triangulation and its polygonal schema. Subdivide the square into a grid. Insert the centre of each small square and join it by line segments to its four corners, making four triangles per small square. Identify opposite sides of by translations: and . This is the standard quotient space presentation of the torus.
The grid and centre vertices, with these identifications, define an abstract simplicial complex . Every triangle contains its own small-square centre and two consecutive grid vertices, so no triangle has identified vertices and no distinct triangles acquire the same vertex set. Only intended common sides or vertices are shared. Thus this is a genuine finite triangulation, whose geometric realization is homeomorphic to . There are vertices, edges and triangles, giving Euler characteristic zero.
Choose the simplex represented in the interior of by the triangle with verticesRemove its relative interior. Before identifying the square's sides, the remainder is a closed disc with a triangular hole, hence an annulus. Cut this annulus along the line segment from to , treating the two banks as distinct boundary arcs. The cut space is a closed disc; traversing its boundary follows the four outer edges, one bank, the three inner edges, and the other bank. It therefore has nine marked boundary sides.
A homeomorphism from this cut disc to a convex nine-sided polygon can be chosen to carry its nine marked sides to the nine polygon sides. One justification is to choose a boundary homeomorphism with the prescribed marked vertices and extend it over the disc by radial extension after disc parametrizations. Transport the identifications to this convex polygon. With labels recording traversal direction, its boundary word isIdentify equally labelled sides in their arrow directions: the two sides and two sides restore the torus pairings, while the two sides undo the cut. Leave unpaired. Their union is the triangular boundary of the removed simplex. The resulting quotient space is exactlyThis is the polygonal presentation of a punctured surface. The word supplies all nine sides and every gluing; inverse exponents reverse the boundary traversal direction.
The classification theorem for closed combinatorial surfaces states that the geometric realization of every closed combinatorial surface is homeomorphic to exactly one of the following:
- The sphere .
- An orientable surface formed as a connected sum of surfaces of copies of the torus .
- A nonorientable surface formed as a connected sum of surfaces of copies of the real projective plane .
With , the complete distinguishing data are orientability and the Euler characteristic:Here , where count the vertices of a simplicial complex, edges, and triangles of a finite triangulation. Thus two such connected closed surfaces are homeomorphic if and only if they have the same orientability and Euler characteristic. In particular is the real projective plane and is the Klein bottle. Every listed type admits a finite triangulation. For disconnected finite closed combinatorial surfaces, apply the theorem to each of the finitely many connected components; the resulting unordered collection of types determines the homeomorphism type.
A topological surface is a Hausdorff space with a countable basis of a topology in which every point has an open neighbourhood homeomorphic to an open subset of the Euclidean plane. We use the convention that a surface has no boundary unless a surface with boundary is explicitly specified. A closed surface is compact and has no boundary. Some conventions also include connectedness in the definition; we impose it on the closed combinatorial surface below.
A closed combinatorial surface is a finite connected simplicial complex with the following properties: every simplex is a face of a simplex of dimension two, and the link of a simplex at every vertex is a cycle graph. Explicitly, for a vertex its link is the simplicial subcomplexTo say this is a cycle graph means that there are distinct vertices , with , and exactly the link edges , with indices modulo . In particular, every edge of belongs to exactly two triangles. The vertex-link condition also requires that the triangles around each vertex form one cyclic fan; edge incidence alone would allow singular examples.
These conditions make a closed surface. A point inside a triangle has a disc neighbourhood, the two triangles at an edge give a disc neighbourhood, and the cyclic fan at a vertex gives a disc neighbourhood. Finiteness gives compactness, the Hausdorff property, and a countable basis of a topology from a realization in a finite-dimensional Euclidean space. If disconnected closed combinatorial surfaces are allowed, each connected component satisfies this definition separately.
Fix a vertex of a simplicial complex , and let be the set of vertices reachable from by an edge path. If a simplex contains a vertex of , every vertex of that simplex lies in : append its edge from the reachable vertex to the existing edge path. Thus every simplex has either all its vertices in or all outside .
Partition the geometric realization as , according to whether the support in the barycentric coordinate system lies in or outside . On each geometric simplex, the intersection with is either the whole simplex or the empty set, and the same holds for . The defining realization topology therefore makes both and closed, hence also open because they are complements.
The vertex belongs to . If any vertex were unreachable, it would belong to the nonempty set , giving a separation of a topological space of . This contradicts connectedness. Therefore every vertex is reachable from , and any two vertices can be joined by an edge path.
An abstract simplicial complex consists of a set of vertices of a simplicial complex and a family of finite nonempty subsets of , called abstract simplexes, such that every singleton belongs to and every nonempty subset of a member of also belongs to . One may include the empty set as an additional face by convention. A member with vertices is a -simplex; its nonempty subsets are its faces of a simplex.
The geometric realization has the following explicit description using a barycentric coordinate system:Here the support is . Each gives a standard geometric simplexwith its usual Euclidean topology. Common faces of a simplex are identified using the same barycentric coordinate system.
Precisely, the topology on is defined by declaring closed if and only if is closed in for every . Equivalently, use the quotient topology on the disjoint union of all the standard geometric simplexes, identifying identical points of common faces of a simplex. For a finite simplicial complex, this agrees with the subspace topology in . For an infinite simplicial complex, the stated rule specifies the realization topology without presuming a finite-dimensional ambient space.
False. Take the metric space with the Euclidean distance and subspace topology inherited from . For every , identify with ; leave the two points and in separate equivalence classes. All equivalence classes have one or two points, so all are closed in this metric space.
Let be the two distinct images of the origins. If are any open neighbourhoods of in the quotient space, their preimages contain respectivelyfor some . Choose . The common image belongs to both and . Therefore the origins have no disjoint open neighbourhoods and the quotient space is not Hausdorff. This is the line with two origins.
True. Choose the irrational number , and partition the rational numbers intoNo endpoint is rational, so these disjoint sets cover . Each is nonempty by the density of the rational numbers, and each is clopen in the subspace topology on .
Let two rational numbers be equivalent exactly when they belong to the same . The bijectionis well-defined. For every subset , the preimage of under the canonical projection of a quotient set is , which is open in . Thus every subset of is open: its quotient topology is the discrete topology. The usual subspace topology on the integers is also the discrete topology, because . Consequently is a homeomorphism.
False. Give its usual topology, identify all points of with one another, and leave every other point in a singleton equivalence class. Take the closed set .
Its image is a singleton in the quotient space, but its full preimage, also called the saturation of a subset, isThis is not closed in , since belongs to its closure. In the quotient topology, a subset is closed exactly when its preimage is closed, by applying the defining open-set rule to complements. Thus is not closed, and this quotient map is not a closed map.
True. The canonical projection of a quotient set is a continuous surjection. Its image is compact by the continuous image of a compact space theorem.
For connectedness, if formed a separation of a topological space of , then the preimages would be disjoint nonempty open sets covering , contradicting its connectedness. This proves the continuous image of a connected space theorem in this case. Hence the quotient space is both compact and connected.
Any two nonempty open sets of the infinite cofinite topology intersect: their complements are finite sets, so the complement of their intersection is finite and cannot be all of .
Suppose the quotient space had distinct points with disjoint open neighbourhoods . Since the quotient map is surjective, both preimages would be nonempty. Since is continuous, these would be disjoint open subsets of with its cofinite topology, contradicting the observation above. Thus any such quotient space with at least two points is not Hausdorff.
Here must denote the closed disc , as its boundary points participate in the identification. For , defineThe Pythagorean trigonometric identity gives , so the image lies in the sphere . Away from the origin the formula is continuous. At the origin, the first two coordinates have absolute value at most and the third tends to , proving continuity there as well.
Every boundary point maps to , while the origin maps to . For a point with , there is a unique with , and its unique preimage isThis point has radius , because . The two poles have the preimages already described. Thus is surjective and its fibers are exactly the prescribed equivalence classes.
The closed disc is compact by the Heine-Borel theorem, and is Hausdorff with the subspace topology from Euclidean space. The preceding result gives the homeomorphism
Use the equivalence relation induced by a function:Equality in supplies reflexivity, symmetry, and transitivity, so this is an equivalence relation. Define by . It is well-defined; it is injective by the definition of and surjective because is surjective.
For an open set ,is open by continuity of . The quotient topology therefore makes open, proving that is continuous.
The continuous image of a compact space theorem applied to makes compact. If is closed in , it is compact, and is compact in the Hausdorff space , hence closed. Thus is a closed map. Its inverse function is continuous, since its preimage of is precisely . We have proved that is a homeomorphism, including the compact-to-Hausdorff continuous bijection theorem used in the argument.
The quotient set consists of the equivalence classes . Its collapsing map is the canonical projection of a quotient setEquip this set with the quotient topology:This is a topology because preimages preserve arbitrary unions, finite intersections, the empty set, and the whole set. The resulting topological space is the quotient space. The displayed rule immediately implies that the preimage of every open set is open, so is continuous; it is also surjective.
The answer is no, because the number of non-isolated points differs. In , every is an isolated point: a sufficiently small open interval around it contains no other member of . The only non-isolated point is , since every neighbourhood of contains some .
In the product topology, is an isolated point exactly when both coordinates are isolated points of . One direction follows because the product of two open singletons is open. For the other, any basic open rectangle containing contains another point if either coordinate has no open singleton. Hence the set of non-isolated points of iswhich is infinite. A homeomorphism takes open singletons to open singletons, so it induces a bijection between the sets of non-isolated points. A space with just one such point cannot be homeomorphic to a space with infinitely many.
There are unlisted articles, also show them or only show them.