Adiabatic nozzle terminal speed Created 2026-10-20 Updated 2026-11-05
For a lossless polytropic flow with , negligible gravity and a sonic throat, the Bernoulli function is . On an expanding supersonic branch for which , the specific enthalpy vanishes and the limiting velocity is the displayed value. If area grows as , mass conservation further gives . A subsonic pressure-confined branch need not have this asymptotic behavior.
Axisymmetric hydrodynamic mass flux function Created 2026-10-14 Updated 2026-11-05
For a steady axisymmetric compressible fluid flow, mass conservation permits this representation. The mass flow through an annulus between two stream surfaces is . In a steady adiabatic wind without magnetic forces, the specific entropy, specific angular momentum and Bernoulli function are locally functions of on connected regular stream surfaces.
Bernoulli function Created 2026-09-24 Updated 2026-11-05
A Bernoulli function collects the terms that become constant along streamlines under the conditions of the Bernoulli equation. For a barotropic inviscid flow with conservative body force , a useful specific-energy convention isHere is the barotropic enthalpy function. At constant density, up to a reference constant.
For steady flow, the Euler momentum equation gives : is constant along each streamline. It need not have the same value on distinct streamlines in a rotational flow. Stating the normalization matters because multiplying by a constant density produces a pressure-unit form, whereas the displayed function has energy-per-mass units. Comparing a pressure term directly with specific kinetic energy without that normalization gives an inconsistent balance.
Bernoulli function (hypercube) Created 2026-10-06 Updated 2026-11-05
On the Boolean hypercube with uniform measure, each coordinate is a Rademacher random variable. Products of these sign coordinate functions are Walsh characters. This use of Bernoulli function is distinct from the fluid-mechanical Bernoulli function.
Critical speed of a polytropic flow Created 2026-09-28 Updated 2026-11-05
For a steady isentropic flow with , and , write the Bernoulli function asAt a fixed position, hold , and the external potential fixed and assume . The positive scalar mass flux is for . Differentiating the Bernoulli constraint gives , henceThe maximum occurs at . Substituting this equality back into the energy constraint givesBoth the small-speed endpoint and the zero-enthalpy endpoint have vanishing , so this interior stationary point is the maximum. The familiar formula with alone assumes a zero potential at the chosen section, or defines to exclude that fixed contribution.
For a perfect gas with no potential change, the result is equivalent to . The local maximum explains choked flow; a complete nozzle solution must also connect the prescribed upstream state to the controlling section.[ref]
Mass Flow Choking by NASA Glenn Research Center. Equations (10)–(19), fixed-total-state flux maximum at Mach one and the throat interpretation
Crocco form of the unsteady Euler equation Created 2026-10-14 Updated 2026-11-05
For a fixed-composition inviscid fluid, specific enthalpy satisfies . Combining this identity with the vorticity cross-product identity gives the displayed equation, with and . It exposes entropy gradients as the thermodynamic source of a mismatch between Bernoulli function gradients and the vorticity term. In a steady adiabatic process, its projection along a streamline makes constant there.
For steady Isothermal Bondi accretion from gas at rest at infinity, define , and , where . The Bernoulli function and mass conservation give . The left side has minimum at , and the radius-dependent part on the right has minimum two at . Existence over all positive radii therefore requires the displayed bound. Equality permits the smooth accelerating-inward transonic branch and gives the usual isothermal Bondi accretion rate. Smaller positive rates have an everywhere-subsonic reservoir-connected branch, and zero rate gives a hydrostatic atmosphere. An absorbing inner boundary inside the sonic radius selects the critical inflow; steady isothermal equations and the outer density alone do not specify that inner condition.
For a steady inviscid barotropic fluid in a conservative gravitational potential, define . Dotting the Euler equation with the velocity givesThe Bernoulli function is therefore constant along a streamline. It balances kinetic energy, pressure work or enthalpy, and gravitational potential energy per unit mass. Different streamlines can have different constants; for an irrotational flow, the identity makes the constant common throughout a connected region.
For an incompressible fluid, up to a constant, giving . For a constant-entropy perfect-gas streamline, . Together with mass conservation, this explains conversion of enthalpy into kinetic energy in a nozzle and the need to include gravity in an escaping wind. Viscous losses, heating and entropy production require their corresponding energy balance. Across an adiabatic shock the total stagnation enthalpy can still be conserved, but the upstream isentropic pressure-density law cannot simply be continued through the entropy jump.
For a barotropic fluid, define . Dotting the steady Euler equation with givesThus the Bernoulli function is constant along each streamline. Different streamlines can have different constants; steady flow alone does not imply one spatially uniform .
In a quasi-one-dimensional flow through area with negligible gravity, the axial momentum equation and giveMeanwhile the mass flow rate is constant, so . Substitution proves the nozzle area-velocity relationA subsonic flow accelerates where decreases, whereas a supersonic flow accelerates where increases. A smooth accelerating transonic branch in a de Laval nozzle therefore crosses at a minimum-area throat. Suitable reservoir and downstream pressures are also required: a converging-diverging shape by itself does not exclude a wholly subsonic solution or a downstream shock.
For the stipulated constant- polytropic flow, . At the throat , soThe specific enthalpy is . Evaluating at the throat and substituting elsewhere givesOn the outward supersonic branch, lets the gas expand and its specific enthalpy tend to zero for . ConsequentlyFor , . Also . These are the adiabatic nozzle terminal speed and expansion laws for a lossless escaping branch; a subsonic branch could instead approach finite pressure with . A pressure-shaped astrophysical jet is being approximated by a nozzle here: the assumed geometry does not by itself explain the confinement or account for magnetic forces or relativistic motion in an actual active galactic nucleus.
Following a parcel. Let be a fluid pathline, with . The multivariable chain rule gives the material derivative,The first term measures change at fixed position; the advection term accounts for the parcel moving through spatial gradients. The derivative is also called the Lagrangian derivative.
The forces on a parcel. A material volume has mass . The pressure forces on its boundary sum to , while the gravitational acceleration is . Newton's second law therefore gives the Euler equations for an inviscid fluid,This neglects viscosity and other body forces. The left side is the parcel's acceleration, not just the time derivative at a fixed spatial location.
Bernoulli conservation. The claimed streamline result needs steady flow and a barotropic fluid, , or an equivalent enthalpy relation along each isentropic streamline. These hypotheses are necessary; the unsteady Euler equation alone does not imply the stated conservation law. Define the barotropic enthalpy functionDot the steady Euler equation with , using . This givesThus the Bernoulli function isEvery term has units of energy per mass, . Different streamlines can have different constants.
The spherical accretion equation. Write the inward speed as , so the velocity vector is and the positive mass accretion rate isAssume a prescribed central potential and negligible gas self-gravity. The steady radial Euler equation isFor a barotropic equation of state, , with . Eliminate the density derivative to obtainA smooth sonic point requires the right side to vanish where , henceFor a nonisothermal gas this is an implicit relation involving the local sound speed. In the isothermal case is constant and this is the Bondi sonic point.
The isothermal integral. For , choose the enthalpy reference so that . The reservoir is at rest at infinity and , making its Bernoulli constant zero. ThusorThe logarithm has a dimensionless argument. Constant temperature during compression generally requires heat removal, so this is Isothermal Bondi accretion, rather than adiabatic accretion with .
The critical accretion rate. Select the smooth reservoir-connected transonic branch. Evaluate the last relation at and :Mass conservation then gives the isothermal Bondi accretion rate,The units are . Equivalently , with .
The inner-boundary selection of isothermal Bondi flow is important: a standard absorbing accretor inside the sonic radius selects this critical solution. The steady equations and alone also admit subcritical subsonic branches supported by a different inner boundary; they do not by themselves fix a unique rate. The usual answer presumes transonic capture.
Past exam of the mathematics course of the University of Cambridge 2005 ib Paper 2 8E Solution Created 2026-09-24 Updated 2026-10-14
The intended dynamical assumption is steady inviscid Euler flow of constant density, with conservative body-force potential . Its equation is . The vector identitythen givesWith no body force take . Taking the scalar product with yields , so the Bernoulli function is constant along streamlines, though not necessarily the same constant on different streamlines.
Choose the planar streamfunction convention . Then with , andIf locally , comparison with giveson the nonstagnant part of that flow. It extends to isolated stagnation points by continuity. Where the streamfunction is constant on an entire open region, cancellation of its zero gradient alone imposes no derivative condition on an arbitrarily extended .
Steadiness and incompressibility alone, without the inviscid dynamical assumption, do not imply the stated identity. In a steady Newtonian viscous flow the correct form has . For example, a pressure-driven planar Poiseuille flow has a nonzero streamwise pressure gradient balanced by viscosity, while has no streamwise component. This identifies the required qualification of the printed premise.
Past exam of the mathematics course of the University of Cambridge 2008 iii Paper 69 2 b Solution Created 2026-10-03 Updated 2026-10-14
Steady axisymmetric mass conservation is , permitting the axisymmetric hydrodynamic mass flux function representationThus stream surfaces are regular level surfaces of . Adiabaticity gives , and axisymmetry removes the azimuthal derivative, so the specific entropy is constant along their meridional streamlines. The azimuthal Euler equations for an inviscid fluid has no pressure or gravitational torque:The conserved specific angular momentum is . Taking the scalar product of the steady Crocco form of the unsteady Euler equation with also givesConsequently, on each connected regular family of stream surfaces,These functions express entropy, angular momentum and the Bernoulli function carried by a stellar wind. Stagnation regions and disconnected branches with identical flux labels require their own matching information; the argument establishes the functions locally where the poloidal flow is nonzero.
To derive the hydrodynamic transfield equation for an axisymmetric wind, decompose the vorticity. The poloidal part comes from the toroidal velocity:The azimuthal part comes from the poloidal velocity:The final divergence is the full axisymmetric cylindrical divergence, including its radial factor.
Since , the meridional part of isThe remaining steady Euler equations for an inviscid fluid is thereforeCanceling on a regular stream surface and inserting givesThe sign of the angular-momentum term follows from . To determine the wind, this transverse force equation is supplemented by its Bernoulli function relationand the equation of state, with the gravitational potential supplied externally or by the Poisson equation.
Past exam of the mathematics course of the University of Cambridge 2009 iii Paper 79 5 a Solution Created 2026-10-03 Updated 2026-10-14
Let , and . The inviscid shallow water equations areTaking the vertical curl of the momentum equation, with constant , gives . Combining this with the depth equation provesThus shallow-water potential vorticity is materially conserved: changes in absolute vorticity are exactly compensated by stretching or compression of the layer depth.
The relation to a Bernoulli function presupposes steady flow. In that case define . The vector identity givesSteady volume conservation allows a transport stream function with . Hence , soIn particular, : the Bernoulli function is constant along each streamline. Where the flow permits a single-valued dependence on the stream function, the displayed derivative describes how that constant changes between neighbouring streamlines. For an unsteady flow, shallow-water potential vorticity remains conserved but the stated steady Bernoulli function relation does not generally hold.
Past exam of the mathematics course of the University of Cambridge 2009 iii Paper 79 5 d Solution Created 2026-10-03 Updated 2026-10-14
Put and , the mean of the two wall velocities. The zero-potential-vorticity rotating channel flow has . Substitution into the volume flux formula givesThe resulting quadratic equation has two roots, . The positive-depth condition selects the minus sign. ThusThe discarded sign would make . On the retained branch , which also shows the admissibility condition .
The depth-based specific energy at the first wall isBecause , this same specific energy holds everywhere across the channel at fixed . Its sum with the bed elevation is the Bernoulli function divided by . Zero shallow-water potential vorticity makes that Bernoulli function constant throughout the connected steady channel flow, soConsequently the depth-based specific energy decreases as the bed rises and increases as it falls. It is constant along a level-bed channel, even if the width varies; that width variation instead changes the wall depths and velocities compatible with the conserved volume flux and Bernoulli function.
Past exam of the mathematics course of the University of Cambridge 2009 iii Paper 79 5 e Solution Created 2026-10-03 Updated 2026-10-14
A hydraulic control of a zero-PV rotating channel is a critical section separating the upstream branch, where long-wave disturbances can propagate upstream, from the downstream branch, where they cannot. In the steady specific-energy description it is a stationary point of with respect to depth at fixed volume flux and local width. The control therefore fixes the discharge for a given upstream Bernoulli function and channel geometry; an arbitrary downstream condition cannot generally be imposed independently on the upstream reservoir.
Evaluate all quantities at and keep fixed while differentiating. With , the preceding branch givesAt the hydraulic control of a zero-PV rotating channel, this derivative vanishes. Using reduces it to , where . Equivalently,Combining this with cancels the quadratic term and leavesAt control and . Both walls must remain wet. Since , the second depth is positive precisely when , givingEquality is the limiting case , with the second wall just dry. For a wider channel, a dry lateral region requires a different solution and the two-wet-wall hydraulic control of a zero-PV rotating channel formula cannot be continued. The channel must also remain sufficiently long and slowly varying for the transverse geostrophic balance approximation to hold. As a check, gives , the familiar rectangular-channel critical discharge.
Past exam of the mathematics course of the University of Cambridge 2013 iii Paper 52 3 Solution Created 2026-10-03 Updated 2026-10-07
In a steady flow the ideal magnetohydrodynamic induction equation gives . Since both vectors have only poloidal magnetic field components, write . Axisymmetry impliesFor a field regular on the axis, ; equivalently one may impose zero toroidal electromotive force. Under this physical condition, is parallel to . Write . Continuity and then give . The poloidal magnetic flux function has , so locally on each connected magnetic surface,This regular-axis alignment of steady poloidal ideal flow needs its zero-circulation condition: axisymmetry alone does not imply this alignment on a domain excluding the axis. An explicit counterexample is available in a cylindrical annulus. Take nonzero constants , positive , andHere , and has zero curl. The flow satisfies continuity, , and . Its acceleration and Lorentz force density vanish, so it solves the steady equations while and are perpendicular. The nonzero toroidal circulation and the axial singularity explain why this counterexample is excluded from a regular polar accretion column. The remaining derivation uses the regular, aligned branch.
For a narrow stream tube, integrating continuity gives constant . On a nonzero-flow tube the magnetohydrodynamic mass loading is constant, so . Therefore is constant and . This also follows directly from conserved magnetic flux through a flux tube.
For constant isothermal sound speed, , with arbitrary reference density . Project momentum along . The Lorentz force density has no component in that direction, and alignment implies . Thus the isothermal magnetic Bernoulli integral isChanging only shifts the Bernoulli function by a constant. Since is constant along the magnetic field,Differentiating the isothermal magnetic Bernoulli integral therefore gives
In the slender polar accretion column, the dipolar flux-tube area is . The decreasing axial field is a leading approximation, not an exactly solenoidal field throughout a cylinder. Indeed for that literal field. Near the axis a small radial component supplies the required radial divergence. Its magnitude is smaller by , even though its divergence is leading order. Keeping this expanding flux tube while neglecting transverse forces yields the intended one-dimensional model.
Use the positive inward speed ; the signed sonic velocity is . Conservation of mass and the Bernoulli equation giveEliminating yields the isothermal dipolar accretion equation,A smooth transonic branch requires both sides to vanish at its sonic point, soThis is the critical point of the flow equation; a generic subsonic solution need not cross it. A crossing in the exterior column requires , and a sonic point strictly outside the star requires . Differentiating the equation at the crossing gives . For inward accretion that accelerates toward the star, .
The reservoir boundary condition fixes . At the sonic point, and , givingFinally use the sonic mass flux through the dipolar flux-tube area:This rate belongs to the smooth transonic branch of the idealized column, with the supplied total loaded area. The reservoir condition alone does not force every steady solution onto this branch. A real narrow dipolar column must match an outer flow where the slender approximation ceases to apply.
Past exam of the mathematics course of the University of Cambridge 2015 iii Paper 57 1 a Solution Created 2026-10-03 Updated 2026-10-06
Write the radial velocity as , allowing for accretion flow, and let be the squared adiabatic sound speed. The steady continuity equation, radial Euler equations for an inviscid fluid and entropy advection equation giveOn a nonzero smooth flow branch, the polytropic equation of state is with constant . Thus the two useful first integrals for spherically symmetric adiabatic flow areHere is the signed mass flux and is the Bernoulli function. The specific enthalpy is ; the prescribed Newtonian gravitational potential has no contribution from the gas's own gravity. Eliminating the density derivative using mass conservation gives the differential formThis sonic point equation displays both the singular coefficient and the numerator that must vanish for a smooth transonic branch.
Past exam of the mathematics course of the University of Cambridge 2015 iii Paper 57 1 b Solution Created 2026-10-03 Updated 2026-10-06
At a finite smooth sonic point , the equation from (a) requiresSet and . Substitution into the Bernoulli function givesAn inflow from a warm reservoir at infinity has ; an outflow reaching infinity has . Therefore a nondegenerate transonic spherical flow in a power-law potential requiresFor the usual range , the critical adiabatic exponent for spherical power-law flow is consequentlyThe printed assumption also permits . In that range the boxed inequality holds for every finite : there is no finite upper bound. Equivalently, take for . Extending the rational expression beyond would give an incorrect restriction.
The strict inequality also follows from local sonic-point slope discriminant analysis, including the potentially cold zero-energy endpoint. Put . Since mass conservation implies , differentiating the sonic point equation at yieldsIts discriminant is . Moreover, the logarithmic Mach number derivative at the sonic point isA genuine crossing has two distinct branches and a nonzero derivative. At equality the crossing degenerates. In particular, for and , mass conservation and the polytropic equation of state make the Mach number constant along the scale-invariant solution; a solution that is sonic there is sonic everywhere, rather than crossing an isolated sonic point.
Past exam of the mathematics course of the University of Cambridge 2015 iii Paper 57 1 c Solution Created 2026-10-03 Updated 2026-10-06
Use the positive mass accretion rate , and retain , . Define , which is positive under the condition in (b). Matching the Bernoulli function to the reservoir and using the polytropic equation of state givesThe transonic spherical accretion rate in a power-law potential is thereforeThe combination has dimensions of length to the power , so this expression has dimensions of mass per time. The sonic point selects the flux that connects the subsonic reservoir to the inward supersonic transonic branch.
For the endpoint limits of power-law spherical accretion, hold fixed. As , , so . HenceThis is also obtained directly from an isothermal equation of state: the Bernoulli function becomes , so . For , , it recovers the isothermal Bondi accretion rate.
For , and means . Since ,ThusThe finite limiting flux accompanies and ; it does not assert a finite-radius sonic point at the endpoint. For this is the familiar limit .
For completeness, the printed range has the endpoint . At , and the flux is independent of , namely . For , and , so as . These are the corresponding extended endpoint limits.
Past exam of the mathematics course of the University of Cambridge 2017 iii Paper 314 2 Solution Created 2026-10-03 Updated 2026-10-14
Use for the radial speed and distinguish the central mass from the Mach number . In each smooth nonzero-flow region, mass conservation, the adiabatic equation of state, and the Bernoulli equation giveHere is constant on a smooth isentropic flow branch, is the adiabatic sound speed, and is the Bernoulli function. Either sign of is possible. The positive-radius nondimensionalization in the question requires ; flows with do not have these positive and require another scaling.
Indeed, the supplied adiabatic process equations give , so is spatially constant along a steady nonzero radial fluid flow. The adiabatic sound speed is , and the specific enthalpy is . The radial Euler momentum equation, , integrates to because on this isentropic flow branch.
Put . Eliminating the mass density from the continuity equation givesWith , the Bernoulli equation becomesTherefore the physical constants of the spherical polytropic flow with adiabatic exponent three halves are
For , , so decreases from infinity to its unique minimum , then increases to infinity. This completely determines the algebraic curves. For , there are two disconnected branches at every , one subsonic flow with and one supersonic flow with . For , the line and a decreasing branch meet at . Their slopes are and , since the leading expansion is . For , solutions exist only where : if solve , there is a forbidden interval . At either endpoint the two branches turn at and have an infinite slope.
A smooth sonic point needs ; hence a regular sonic transition requires and . The critical speed of a polytropic flow is then , and the allowed mass flux is . Here the subscript on denotes evaluation at the sonic point, rather than the isothermal sound speed convention used in the next solution.
The simple transonic branch is . Direct substitution givesThus the radial velocity has constant magnitude, while the mass density and pressure scale as and . For an outward fluid flow, this is a subsonic flow becoming a supersonic flow as its adiabatic sound speed decreases.
On the other transonic branch, decreases as increases. At large , the terms and dominate, giving . At small , the terms and dominate, giving . The resulting asymptotic expansions areFor inward fluid flow, these are the nearly static reservoir at infinity and the inner free fall region of Bondi accretion. The specific enthalpy is smaller than in the inner limit, which explains free fall. Reversing the radial velocity gives a decelerating outflow with the same profiles. The formal small- limit describes the point-mass model: if the spherical gravitating body has a finite surface, the exterior solution stops there.
A stationary, nonradiative normal shock wave conserves the mass flux and the sum , while the Newtonian gravitational potential is continuous across its thin layer. Hence and are unchanged. The entropy production in a perfect-gas shock increases , soMore explicitly, the Rankine-Hugoniot condition for gives, with upstream ,Thus the shock wave jumps vertically, at the same , from the supersonic flow to a subsonic flow on a larger- curve. The figure illustrates an outward flow on with a shock wave at ; the downstream subsonic flow has and continues to larger . The shock wave radius is an additional boundary-data choice, rather than being determined by the smooth equations alone.


