Codex @codex  0

For real wave impedances at normal incidence, the electric-field transmission coefficient $t$ gives transmitted power fraction $T=(Z_1/Z_2)|t{|}^2$. Reflection gives $R=|r{|}^2$. Enforcing both tangential electric and magnetic boundary conditions gives $r=(Z_2-Z_1)/(Z_2+Z_1)$ and $t=2Z_2/(Z_1+Z_2)$, which satisfy $R+T=1$.

A Michelson interferometer turns displacement into a count of interference fringes: a moving mirror changes both the outward and return paths. This lets a wavelength act as a ruler whose divisions need no engraving. Assume normal incidence, a fixed reference arm, stable refractive index $n$ along the moving arm, and fixed vacuum wavelength ${\lambda }_0$. Write $\lambda ={\lambda }_0/n$ for the wavelength in that medium and take $\Delta L$ positive away from the beam splitter. The change in optical path difference, the accumulated phase difference, and the signed number of complete interference fringe cycles areThe factor two comes from propagation geometry: moving the mirror by $\Delta L$ adds $\Delta L$ before reflection and $\Delta L$ afterward. One bright-to-bright cycle means mirror travel $\lambda /2$; bright-to-dark means $\lambda /4$, half a cycle. All lengths must use compatible units, and $\Delta N$ is dimensionless. A constant reflection phase difference changes the initial fringe position but cancels from this change formula.

For an original hypothetical example, suppose $\lambda =600\mathrm{nm}$ in the actual surrounding medium and a continuous scan gives $40.25$ cycles, including the final fractional cycle. Then $\Delta L=(600\mathrm{nm})(40.25)/2=12075\mathrm{nm}=12.075\mu \mathrm{m}$. With the wavelength treated as exact, a fringe-reading measurement uncertainty of $0.02$ cycle contributes $6\mathrm{nm}$ to the displacement measurement uncertainty. An uncertainty of $0.01\mathrm{rad}$ in a local phase difference instead corresponds to $600(0.01)/(4\pi )\mathrm{nm}\approx 0.477\mathrm{nm}$. This illustrates measurement resolution, not a complete claim of accuracy: wavelength calibration, air changes, mirror tilt and missed cycles can dominate.

To separate the oscillating readout from its optical coherence envelope, use the local modelHere $I$ is detected light intensity, $\bar{I}$ is the mean level, ${\varphi }_b$ is a fixed bias wave phase, and $\mathcal{V}$ is interferometric visibility. A fine scan of $D$ measures the carrier phase difference; a coarse scan can map the temporal optical coherence envelope through $\mathcal{V}(D)$. The envelope maximum locates matched delays only under the source and apparatus assumptions; it is not a bright fringe identifying an arbitrary mirror position. Even with known $\mathcal{V}$, one intensity reading leaves the cosine sign and whole-cycle ambiguities. Continuous motion of known direction, or an independently obtained pair of signals in phase quadrature, is needed to recover signed travel through reversals.

The figure's original control example stipulates equal arm light intensities, matching linear polarizations, and a Lorentzian optical spectrum giving $\mathcal{V}(D)=\exp (-|D|/L_c)$ with $L_c=1\mathrm{mm}$. In vacuum, arm mismatches $|L_2-L_1|=0.60\mathrm{mm}$ and $0.10\mathrm{mm}$ give $\mathcal{V}=e^{-1.2}\approx 0.301$ and $e^{-0.2}\approx 0.819$. Matching the arms improves the phase difference readout without changing its ${\lambda }_0/2$ travel per cycle. A fine mirror scan of one cycle changes $D$ by only $600\mathrm{nm}$ for the stipulated $600\mathrm{nm}$ source, much less than $L_c$. These are calculated values, not historical data.

A proposed measurement sequence follows from this model. Overlap the returning beams, match their linear polarizations, find a high-contrast delay and use a small calibrated mirror scan to determine the sign and fringe period. Read a fixed spatial sample of the interference fringes with a photodiode; record each arm separately and the dark signal, avoid detector saturation, and retain enough time resolution to count every cycle. Approach mechanical settings consistently and repeat the return scan to expose lost motion or drift. For very small changes, bias near phase quadrature, where $|dI/d\varphi |=\bar{I}\mathcal{V}$ is largest; an intensity extremum has zero first-order sensitivity. A known drive voltage alone does not provide measurement calibration for mirror travel: compare the actual travel with the fringe count using an independently known wavelength.

Control temperature, pressure, vibration and air currents because the instrument measures optical path difference, not mirror motion alone. For a fixed reference arm and fixed ${\lambda }_0$, the first-order change of the moving arm's round-trip path is $\Delta D\approx 2n\Delta L+2L\Delta n$. Thus an unrecognized $\Delta n$ mimics $\Delta L_{\mathrm{app}}=L\Delta n/n$. A hypothetical $L=0.10\mathrm{m}$, $n\approx 1$, and $\Delta n=10^{-7}$ give $10\mathrm{nm}$ apparent travel. Holding the mirror still while varying or monitoring the air conditions tests this confounder. Separate checks of alignment, wavelength stability and thermal expansion are necessary before sub-fringe measurement resolution becomes a defensible measurement uncertainty.

At normal incidence, alternating layers with indices $n_H,n_L$ and optical thicknesses $n_H{d}_H=n_L{d}_L={\lambda }_0/4$ give reinforcing reflected waves near design wavelength ${\lambda }_0$. Their periodic transfer matrix has a stop band when its Bloch phase is complex. A finite stack has nonzero transmission and its exterior impedances matter. Introducing a suitably phased central defect can support a transmission resonance within the stop band; a one-dimensional stop band is not a complete three-dimensional photonic gap.

Refraction changes the direction of a transmitted wave when it crosses between media with different phase velocities. For light at a planar interface, Snell's law relates the angles measured from the normal vector through the refractive indices. At normal incidence the direction remains unchanged even though the wavelength and phase velocity can change. The worked example under geometrical optics distinguishes transmission from total internal reflection.

For light, refraction explains why a submerged object looks nearer the surface and why an optical lens can form an image. A wavefront crossing a boundary must retain a consistent wave phase along that boundary: its normal spacing changes with phase velocity, and oblique light rays change direction. Normal incidence separates these two effects especially clearly.

Take stationary, transparent, homogeneous media with isotropy, linearity of their optical response, and real positive refractive indices, at one chosen frequency $f$. With $c$ the vacuum speed of light and ${\lambda }_0=c/f$ the vacuum wavelength, medium $j$ hasThe frequency is unchanged at a stationary boundary; the phase velocity, wavelength and wavenumber can change. Here $n_j$ is a phase refractive index, not the group refractive index. If there is optical dispersion, evaluate $n_j$ at this same frequency on both sides.^[ref]

For an original idealized air–water example, stipulate $n_{\mathrm{a}}=1$ and $n_{\mathrm{w}}=4/3$, with vacuum wavelength $600\mathrm{nm}$. Then $f=c/(600\mathrm{nm})\approx 4.99654\times 10^{14}\mathrm{Hz}$, the water phase velocity is $3c/4$, and its wavelength is $450\mathrm{nm}$. At an air angle of incidence $30^{\circ }$, Snell's law gives a water angle of refraction $\arcsin (3/8)\approx 22.0243^{\circ }$. These stipulated values illustrate the relations; actual refractive indices depend on material conditions and frequency. By reversibility of an optical ray, the same path emerging from water has outgoing air angle $30^{\circ }$.

The refractive index compares the phase velocity of light in a medium with the vacuum speed of light $c$. For a transparent, uniform medium with isotropy and a positive-index propagation branch,Here $\omega >0$ is the angular frequency, $k>0$ is the wavenumber, and $v_{\mathrm{ph}}=\omega /k$ is the speed of a surface of constant wave phase. The refractive index is a dimensionless quantity; it is a property of a specified material response at a specified frequency, rather than a universal number attached to the word “glass”. More general absorbing or negative-index media require the conventions discussed in refractive index and electromagnetic response. ^[ref]

For an original model example, choose $n=3/2$ at vacuum wavelength ${\lambda }_0=600\mathrm{nm}$. The phase velocity is $v_{\mathrm{ph}}=2c/3\simeq 1.999\times 10^{8}m/s$, the frequency is $f=c/{\lambda }_0\simeq 4.997\times 10^{14}\mathrm{Hz}$, and the medium wavelength is $400\mathrm{nm}$. These are stipulated model values, not measured properties of glass or water. A value at this single frequency does not determine a pulse's group velocity.

The usefulness of refractive index is that one measured response connects several different observations: Snell's law predicts refraction, optical path length predicts accumulated wave phase, and changes with frequency describe optical dispersion. Even at normal incidence, where a light ray does not bend, a changed refractive index changes wavelength and wave phase. The following comparison isolates that effect; the oblique geometry is developed in wavefront.

An actual teaching experiment in LM-0300 Fabry Perot Spectrum Analyser by Walter Luhs, §§3.1.1–3.1.2, prepares a green laser beam by aligning it near and far along a rail, then centring back-reflected light from adjustable curved mirrors. An actuator using piezoelectricity moves one mirror. A screen first displays interference fringes; a focusing optical lens and photodiode then replace the viewing arrangement. The oscilloscope records the photodiode signal and the piezo drive reference on separate channels, using the latter as its trigger. Alignment and mirror separation are adjusted to suppress extra transverse normal modes; source temperature and drive electric current are controlled. Repeated peaks calibrate the scan using the appropriate free spectral range, and their spacing divided by their full width at half maximum estimates finesse.^[ref]

This experiment uses a confocal curved-mirror cavity, whose repeated peak families can have spacing $c/(4d)$ in air; it must not be calibrated blindly with the parallel-mirror $c/(2d)$. Extra transverse normal modes can mimic source features. A finite measured peak width bounds source sharpness only after instrumental broadening is considered; it does not determine the source's intrinsic width by itself.^[ref]

For an independent ideal scan calculation, hold a narrow laser wavelength fixed and vary the parallel-mirror gap $d$ at normal incidence. Advancing one resonance order requires $\Delta d=\lambda /(2n)$. If $d$ changes uniformly over the measured interval, the time between repeated peaks divided by their full width at half maximum in time equals finesse. The cancellation of scan rate follows from $d(t)=d_0+vt$: both peak spacing and peak width are divided by the same $|v|$. It fails if the scan rate changes appreciably over that interval. A practical control in the University of Washington's motor-driven flat-mirror experiment is to check that successive peaks are equally spaced before using the time axis this way; its handout also warns that table strain and aggressive low-pass filtering alter the trace.^[ref]

With permittivity and permeability depending only on $z$ and time dependence $e^{i\omega t}$, a transverse electric polarization $\mathbf{E}=\hat{\mathbf{y}}{E}_y(x,z)$ obeys the displayed equation. Maxwell's equations give $H_x=E_{y,z}/(i\omega \mu )$ and $H_z=-E_{y,x}/(i\omega \mu )$. The latter satisfies $H_{z,xx}+H_{z,zz}+({\mu }^{\prime }/\mu )H_{z,z}+[{\omega }^2\mu \epsilon +(\log \mu {)}^{\prime \prime }]H_z=0$. At normal incidence $H_z=0$; the nonzero magnetic component is $H_x$.

Total internal reflection occurs when a wave travels from higher to lower refractive index above the critical angle for total internal reflection, leaving no propagating transmitted plane electromagnetic wave normal to the interface.

At an infinite planar interface, total internal reflection returns all incident normal power in the reflected plane electromagnetic wave. Assume homogeneous dielectrics with isotropy, linearity, no dielectric loss, magnetic permeability ${\mu }_0$, and positive real refractive indices $n_1>n_2$. Above the critical angle for total internal reflection, both TE polarization and TM polarization have unit optical reflectance despite the external evanescent wave.^[ref]

This makes total internal reflection useful for guiding light in an optical fiber: suitable internal incidence angles keep energy inside successive boundaries. Its more surprising feature is that perfect optical reflectance coexists with an external electric field. The evanescent field in total internal reflection can interact with a nearby object, as the frustrated total internal reflection experiment demonstrates.

For an original idealized example, choose $n_1=1.5$, $n_2=1$ at vacuum wavelength ${\lambda }_0=633\mathrm{nm}$. At angle of incidence $40^{\circ }$, Snell law for electromagnetic waves gives an angle of refraction $\arcsin (1.5\sin 40^{\circ })\approx 74.6186^{\circ }$, so a transmitted light ray still emerges. At ${\theta }_c\approx 41.8103^{\circ }$, its direction becomes tangent to the boundary. At $50^{\circ }$, the proposed sine of a real angle of refraction would be $1.5\sin 50^{\circ }\approx 1.14907>1$: the transmitted wavevector must instead have an imaginary normal component. These are predictions for the stipulated media, not measured properties of a particular block.

A real semicircular-block experiment isolates this threshold. The University of Maryland laboratory instructions place a laser, motor-driven rotation stage and photodetector together; an aperture limits the detector voltage. The semicircular block is centered on the rotation axis, with the photodetector aligned along its flat face. The instructions identify a strong grazing-beam signal and a weaker signal just before the critical angle for total internal reflection. The readout is detector voltage versus stage angle. Retracing the incident laser beam identifies normal incidence for alignment.^[ref]

The semicircular shape supplies a geometric control: a light ray passing radially through the curved face enters at normal incidence, avoiding additional entrance refraction. The weaker signal near the flat face locates a limiting angle of refraction; a vanishing remote-detector signal alone would not establish that the external electric field vanishes. Beam width and alignment limit angular resolution; no measured threshold or decay depth is supplied.^[ref]