Take the unit normal to point outwards. The divergence of the field is
The divergence theorem turns the closed surface integral into a volume integral over :
For a direct check of the surface integral, on the outward component is , contributing . On it vanishes. On both and , . On , , whereas on the field component is and the outward normal is , giving a contribution . The six face contributions are therefore , again totaling 2. The positive bottom-face contribution is a consequence of its outward orientation.
The second fundamental form records the normal component of second-order bending of the surface. For a surface curve , the terms containing and are tangent and therefore
Thus on a unit tangent direction it gives the normal curvature; for a general coordinate direction the normal curvature is the ratio of the second to the first fundamental form. Equivalently the quadratic part of displacement out of the tangent plane is one half of this form. Reversing the chosen unit normal changes its sign.
Now suppose . Differentiate . This gives
Also differentiation of gives . The parametrization is regular, so form a basis of three-dimensional space. Both normal derivatives are orthogonal to this basis and hence vanish:
The parameter ball is connected; integrating these derivatives along a straight segment between parameter points shows that is constant. Finally both derivatives of vanish, because are tangent. Thus the zero second fundamental form implies planar image statement is
The PDF has in the second derivative equality; the apparent in the TeX is not a distinct coordinate.
Parametrize the surface by . Its tangent vectors are and . Choose the upward unit normal
The first fundamental form coefficients are
Since and , the second fundamental form coefficients are and . The determinant of the shape operator gives the Gaussian curvature:
Changing the normal's sign changes both second-form factors and leaves this determinant unchanged. Although the question calls the surface a hyperboloid, is a hyperbolic paraboloid; the calculation uses the stated surface equation.
For a regular parametrized surface , the first fundamental form is the induced metric
Choose the unit normal . With the convention , the second fundamental form is
The Gaussian curvature, the product of the principal curvatures, is
For a compact smooth embedded surface without boundary, the Gauss-Bonnet theorem gives
where is the Euler characteristic. The no-boundary condition is needed for this form; a smooth embedded surface with boundary has the additional boundary geodesic curvature integral.
For the surface of revolution, use
The parameters are periodic, with local open parameter rectangles providing the coordinate charts. Put and . Since and , both and are positive. The tangent vectors are
Their inner products are , , and . Thus
Their cross product is , so its normalization gives the outward unit normal
Next,
Taking their inner products with yields , , and . Hence the fundamental forms of an elliptic ring torus give
Choosing the inward unit normal changes both displayed coefficients of to their negatives and leaves and unchanged. As a consistency check, ; its integral over the torus is zero, since cancels under . This agrees with in the Gauss-Bonnet theorem.
Write for the induced metric and lower the shift vector with it, . In the stated negative-shift convention the four-dimensional components and inverse components are
Multiplying the given future unit normal by this metric tensor gives . In particular the tangential normal components vanish, but their covariant derivatives do not:
The relevant Christoffel symbol is
For the second equality, the last parenthesis is , so its contraction subtracts the two spatial connection terms in the symmetrized derivative of . Therefore
This is extrinsic curvature with a negative shift. Both the future-normal orientation and the definition matter: replacing the threading by reverses the shift terms. The spatial induced metric is generally a function of time as well as position; restricting it to time-independent data would simply make the displayed time derivative vanish.
The product rule gives
Apply the divergence theorem, with outward unit normal , and use the vanishing Laplacian of the harmonic function :
The boundary value of is one. Another application of the divergence theorem therefore gives
This is the gradient pairing with a boundary-constant function and a harmonic function, obtained directly from Green's first identity. The harmonic function must be regular throughout the volume; an interior singularity can supply an additional boundary flux.
Away from the origin the gradients are and . The improper volume integral is therefore
The function is a harmonic function only off the origin. It is singular inside the integration volume, so it does not meet part (a)'s regularity hypothesis. On the punctured ball, Green's first identity has outer flux and inner flux : the inner outward unit normal is , so . Their sum is , exactly the integral before taking the limit. Equivalently the distributional Laplacian of is , rather than zero throughout the ball. This is boundary flux from a singular harmonic potential; it explains why applying part (a) across the origin would be invalid.
The vector triple product removes the nested cross products:
Since is constant, the divergence is
The cube has volume . With the outward unit normal, the divergence theorem therefore gives
Set . The two tangent vectors to the Enneper surface are
Their cross product is . Since , its length is , proving regularity and giving the unit normal
For the first fundamental form, direct dot products give and . The second derivatives are , , and . Taking their dot products with gives the second fundamental form coefficients , , . Therefore the Gaussian curvature is
Here curvature means Gaussian curvature; the opposite signs of the second-form diagonal entries also give zero mean curvature, as expected for this minimal surface.
Take to be the unit normal, so is orthogonal projection onto . With the Euclidean Levi-Civita connection, the proposed derivative is
It is a smooth tangent field, and independence of the extensions is given. Linearity follows from linearity of and . Moreover, for , take local extensions of to obtain
since . Thus it is an affine connection on .
For tangent fields , the normal component of pairs to zero with . Differentiating the ambient inner product along gives
Hence it is a metric connection for the induced Riemannian metric. The ambient torsion vanishes, so
Here the restriction of the ambient bracket is the intrinsic bracket and is tangent to : derivations of functions restricted to give the same bracket, or this follows in submanifold coordinates. Thus the projected derivative is also a torsion-free connection. Uniqueness now proves
This is the projected ambient connection. The projection formula requires a unit normal. If a nonunit normal is used, its normal term must instead be . For example, on the unit circle, taking and differentiating its unit tangent along itself gives ; the unnormalized printed expression would be , which is not tangent. Normalizing the normal removes that ambiguity.
Assume the level set is regular and non-null. The latter hypothesis is necessary: a null hypersurface has a degenerate induced metric and hence no ordinary intrinsic Levi-Civita connection determined by that metric. Normalize the normal vector and define the non-null hypersurface projection by
Here denotes the induced metric restricted to tangent vectors, while its ambient extension annihilates . The intrinsic covariant derivative is for tangent vector fields. Projection of the ambient torsion-free connection and metric compatibility shows that is the Levi-Civita connection of . Define the extrinsic curvature by , or . It is symmetric: differentiating the defining function twice and projecting removes the derivative of its normalization, leaving a multiple of its symmetric Hessian. This sign convention makes the scalar second fundamental form .
Let be the tangent linear map characterized by . Differentiating and gives the Gauss formula
Fix the Riemann curvature tensor convention
Applying the Gauss formula twice gives
Subtracting the expression with interchanged, and then subtracting the bracket derivative, proves
Thus the Gauss–Codazzi equations for a non-null hypersurface give the intrinsic Riemann curvature tensor as
All free indices here are tangent to the hypersurface. The normal component of the same calculation is
After antisymmetrizing and using , this yields the curved-ambient Codazzi equation
The extrinsic curvature measures how tangent planes turn in the ambient manifold; the Gauss equation says that this turning contributes to intrinsic curvature even when the ambient Riemann curvature tensor is zero.
For the quadric in Minkowski spacetime, write its position vector as . On the hypersurface, and differentiating this identity in a tangent direction gives . Hence is a unit normal and a spacelike vector, , and in flat Cartesian coordinates. Therefore . The ambient Riemann curvature tensor vanishes, so
This is unit-radius de Sitter spacetime. Reversing the normal changes to but does not change this curvature. An opposite overall convention for the Riemann curvature tensor would reverse both curvature signs below.
To retain a four-dimensional Lorentzian metric while reversing the curvature, take a flat ambient metric with two negative directions and the quadric
Now the position vector is a unit normal with negative squared norm, so while remains true. The Gauss equation gives
This is unit-radius Anti-de Sitter spacetime. If a positive-definite induced metric is acceptable, an even simpler alternative is to keep the original one-time ambient Minkowski metric and change the quadric level to . Each sheet then gives four-dimensional hyperbolic space with the same negative curvature, but its induced signature differs from that of de Sitter spacetime.
The shape operator is the self-adjoint tangent map , using a locally chosen unit normal. Its eigenvalues are the principal curvatures, and their eigenvectors give the principal directions. At an umbilical point they coincide, so and every tangent direction is principal. Reversing the normal changes both curvature signs but does not change the principal directions or umbilicity.
The Theorema Egregium states that Gaussian curvature is determined by the first fundamental form, and therefore preserved by local isometries. For a local surface parametrization , write , choose a unit normal , and set . Decomposing the second derivatives into tangent and normal parts gives
Commute the third partial derivatives of and take tangent components. The terms involving derivatives of are normal; the tangent terms give the Gauss equation
where is computed from derivatives and products of the displayed Christoffel symbols, using . For example the tangent term from differentiating is , which produces exactly the difference of the two products on the right. Consequently
The last expression depends only on and its derivatives. Pulling back under a local isometry therefore preserves , proving the theorem.
Use signature and write for the spatial induced metric, for its spatial covariant derivative, and . The negative shift vector convention gives and . Decomposing the scalar field derivative gives
Varying the scalar field matter action with respect to the inverse metric tensor, including the variation of , gives the stress-energy tensor
Raising both indices gives the requested . Contracting with the unit normal twice, or once with the spatial projection tensor, gives
Projecting both indices of the stress-energy tensor onto the spatial hypersurface gives
Two printed identifications require correction. The canonical momentum of the displayed density is , not : explicitly and differentiation with respect to supplies . Thus is the normal scalar-field momentum. Also, the printed trace-free stress has an extra factor and uses where the general spatial induced metric requires . In an orthonormal spatial frame the latter becomes , but the coefficient is still one. For a gradient in that frame, direct projection gives , rather than the printed . The PDF's energy-density gradient is spatial ; the TeX aid's spacetime index there is an OCR defect.
We prove finite propagation speed using a shrinking cone energy argument. Fix and , and suppose the Cauchy data vanish on . For , define the local wave energy
The homogeneous wave equation gives the local conservation law
Differentiate the integral over the moving ball. Its boundary moves inward with speed one, so the divergence theorem gives
Here is the outward unit normal, the normal derivative, and the component of the gradient tangent to the boundary. Since and , we have . Hence both and vanish inside the backward light cone. Integrating from the zero initial displacement gives ; continuity then gives .
Applying the same energy estimate to the difference of two solutions proves the domain of dependence assertion. If , the initial ball misses , and the preceding argument proves the stated support bound. No disturbance propagates faster than one.
The two displacement vectors and lie in the required plane. Because the three points are non-collinear, their cross product
is nonzero and is a normal vector to that plane. A point with position vector lies in the plane exactly when
Expanding the cross product gives
The terms and vanish, so the equation of a plane through three points becomes
Non-collinearity is important: it ensures this is a genuine plane equation with nonzero normal, rather than the vacuous equality .
For the specified coordinates,
Their sum is , with Euclidean norm . Consequently either orientation of the unit normal is valid:
As a check, the scalar triple product is , so the plane equation simplifies to , which all three supplied points satisfy. The normal direction is .
The chosen unit normal points toward the plane from the origin, so the plane equation is
To locate the circle centre, project onto this plane. Put
Then , so lies in the plane. For any other point of the plane, is perpendicular to . The Pythagorean theorem therefore gives
Restricting the sphere equation to the plane consequently gives a circle centred at . Thus , proving that the displacement of its centre is purely normal:
The same Pythagorean theorem gives , and hence
The sign of is fixed by which side of the plane contains ; and alone determine only its magnitude. Substituting the signed offset yields the sphere-plane intersection radius
A genuine circle requires ; equality gives tangency and , while a larger distance gives no intersection. The signed distance from a point to a plane in the direction is ; the ordinary distance from a point to a plane is its absolute value.
The product rule for the divergence gives
Subtracting cancels the two gradient products. Therefore
To obtain the requested order of terms, apply this identity with interchanged and use the divergence theorem on the spherical shell. On the outer sphere the shell's outward unit normal is ; on the inner sphere it is . Write on both spheres. Then the resulting Green second identity is
The minus sign records the inward radial direction of the shell's normal on its inner boundary. Thus the normal derivatives in the displayed difference are outward from each individual ball; using shell-outward normals instead would put a plus sign between the two boundary integrals.
The curl is constant:
Orient the spanning planar disk by the unit normal and orient its boundary by the right-hand rule, equivalently counterclockwise when viewed from the side towards which points. Stokes theorem converts the line integral to a constant flux integral through a disk of area . With this orientation
Reversing the orientation changes the sign. The centre of the circle does not enter because the curl is constant.
The Hopf boundary point lemma requires an interior sphere condition, strictness of the boundary maximum, and quantitative control of the uniformly elliptic operator near the contact point. Assume that , that and , and that . After shrinking the tangent open ball, we may suppose that the coefficients are bounded there and that, for constants and ,
The coefficient matrix may be replaced by its symmetric matrix part because the Hessian matrix is symmetric. Assume also that throughout the tangent open ball. In the usual statement, one assumes throughout ; when is connected, the strong maximum principle for elliptic operators supplies this strictness from a nonconstant solution attaining its global maximum at .
Put , the outward unit normal of the tangent open ball. With only the given continuity at , the precise conclusion is
If the outward normal derivative exists, it is strictly positive. In particular, if is continuously differentiable up to and the domain has this outward unit normal, then . The stated boundary regularity alone does not assert existence of a normal derivative.
For the proof, use the annulus and the barrier for the Dirichlet problem
Writing , direct differentiation gives
Choose , so that on . On the inner sphere, compactness and the strict maximum give . Choose with . On the outer sphere and , including at by continuity. Consequently has and nonpositive boundary values. The allowed comparison principle, or the weak maximum principle for elliptic operators, yields in .
Along the inward radius this gives
This proves the Hopf boundary point lemma. There is no sign restriction on here, because the operator has no zeroth-order term.