For short times, survival under unitary time evolution is . Dividing a fixed time into intervals and projecting back after each gives survival approaching one as . This suppression of departure by repeated projective measurements is the quantum Zeno effect.
For measurement-guided Zeno transfer, rotate the measured basis gradually to transport a known state. Let
Measure in these orthonormal bases successively for . Starting in , the probability to follow the outcome at every step is
Its final state is . If every outcome is retained without postselection, the final probability for is , also approaching one; histories with two switches can return to that branch. These two finite- probabilities should not be confused.
For a general unknown input, the same slowly turning measurements first resolve its amplitudes into the two branches, then drag each branch separately. In the large- limit, after discarding the records,
The first basis approaches the computational one as grows. Inserting an initial computational measurement makes this branch decomposition exact at the outset, without changing the limiting result. Relative phase is lost, so this procedure transports a known basis state with high probability rather than implementing a coherent Pauli X gate on an arbitrary qubit.
Type-I phase matching requires , because both pump photons are ordinary and the harmonic is extraordinary. Apply the direction-dependent index equation to the harmonic, not to the pump. Solving gives
For the ruby-laser data this is , whereas the shorter-wavelength data give . Therefore
The second calculation uses the supplied indices as rounded harmonic data: the exact half-wavelength of is . The index dispersion between those two ultraviolet values was not supplied.
For an extraordinary wave, its Poynting vector makes an angle with the optic axis satisfying . Thus the spatial walk-off angle relative to the wave vector is
Both angles refer to the harmonic. The ordinary pump does not have this angular walk-off. For beam radius , the approximate overlap length is , so the shorter-wavelength geometry has about times the walk-off-limited interaction length.[ref]
To compare coupling, take propagation azimuth and ordinary unit polarization . Its quadratic source is . Projection onto an extraordinary displacement direction with component proportional to gives , up to the small anisotropic normalization correction. The optimal azimuth is . At equal beam area, interaction length, input power and approximately equal nonlinear coefficients, the shorter pump has both stronger angular coupling and the favorable frequency-squared factor:
Here in the small-conversion, equal-area model, with harmonic index phase-matched to the pump. Its smaller spatial walk-off further favors the pump in a walk-off-limited geometry. Equal input power alone does not determine an absolute efficiency ranking: ultraviolet absorption, wavelength-dependent , beam size, crystal length and coatings are unspecified. For example, a sufficiently strongly absorbing output can reverse the ideal ranking. The stated preference is conditional on comparable transparent crystals and comparable focusing, not a prediction independent of those parameters.
For a fundamental electric field in the plane, . The specified tensor then gives
Writing and yields
The source electric polarization is therefore along and is largest along the in-plane diagonals. A radiated wave also needs a transverse component of this source: propagation along would not generate a propagating -polarized output. Propagation in the plane provides the simple strictly transverse example. For a tilted extraordinary wave, the electric displacement, rather than generally the entire electric field, is perpendicular to the wave vector; the tensor source must be projected onto that wave's allowed polarization. This distinction matters when using the type-I geometry below.
For bulk electric-dipole second-harmonic generation, the crystal must lack inversion symmetry and have a nonzero relevant component of its second-order nonlinear optical susceptibility. It should transmit both pump and harmonic, tolerate the required intensity, and allow phase matching by suitable birefringence or another phase-compensation mechanism. A large nonlinear coefficient, low optical loss and good optical quality are desirable. Noncentrosymmetry permits a response but does not guarantee one in every chosen geometry.
In the undepleted plane wave limit, contributions from successive layers give a harmonic amplitude proportional to , where . Hence
Tune orientation, temperature and pump polarization to maximize the nonlinear coupling and cancel phase mismatch. For continuous operation, an impedance-matched enhancement optical resonator, or intracavity doubling, raises the circulating intensity. Focus the Gaussian beam to balance intensity against diffraction and spatial walk-off; arbitrarily tight focusing shortens the useful overlap. Antireflection surfaces, stable resonance locking and efficient heat removal reduce avoidable loss and drift.
The raised-index region has , whereas . Therefore its numerical aperture factor is . With the printed rounded cutoff,
Thus
Slower scanning increases the written radius and makes the guide multimode; faster scanning makes it single-spatial-mode in this idealization, provided a physically meaningful positive core radius remains. Using gives . This numerical threshold extrapolates the supplied empirical radius law; its experimental range is not given.
The contrast is weak: . Use a scalar weak-guidance Helmholtz equation for a transverse field component, with longitudinal wave number and vacuum wave number . Separating variables as gives
A bound mode requires . Define
The step-index fiber normalized frequency is ; is a dimensionless core transverse wave number. Regularity at selects the Bessel function of the first kind, while decay at infinity selects the Modified Bessel function of the second kind:
In this scalar approximation, continuity of the field and its radial derivative gives
At cutoff the evanescent wave extends arbitrarily far into the cladding, so , and . For the first azimuthally varying family , the recurrence relations reduce the last equality to
As , and , making the right side tend to zero. Thus the onset is at the first positive zero of :
The scalar fundamental family has no positive cutoff. The first additional spatial family is the family just found; the next radial and first families require the larger zero . This establishes the first multimode boundary rather than merely finding one possible cutoff. The two polarizations of the fundamental family are not counted as two spatial modes. Exact vector interface conditions split some higher-mode degeneracies at finite contrast; the displayed condition is the weak-guidance result intended by the supplied scalar equations.
The incident intensity radius is , half the quoted diameter. For an ideal collimated Gaussian beam focused by a thin lens, the diffraction-limited waist is
The incident Rayleigh range is much larger than , justifying this approximation. The pulse energy is . Taking its duration as an effective energy-to-peak-power width gives . Since has integrated power ,
If denotes the temporal intensity full width at half maximum of a Gaussian pulse, the time integral instead gives , and . The pulse shape is unspecified, so the estimate's order-one convention is explicit. Aberration, clipping and propagation through glass were excluded from this calculation as stipulated.
Use mode locking to phase-lock many longitudinal cavity modes; their repeated constructive interference produces short optical pulses. A saturable absorber can select this pulsed operation. A fundamental repetition rate corresponds to a round trip, or an optical round-trip length ; a linear air-filled cavity would therefore be about long. A compact alternative is a faster mode-locked oscillator followed by pulse selection and, if required, amplification. Ordinary Q-switching alone generally does not provide pulses.[ref]
The annihilation operator eigenvalue property gives
This is a classical monochromatic electric field: the modulus of fixes the wave amplitude, while its argument fixes the wave phase relative to the chosen mode convention. Direct normal ordering also gives , independent of . Hence the fluctuation divided by the peak mean-field amplitude is , small in the bright coherent state limit. A relative fluctuation evaluated exactly at a field zero is not a useful classicality test.
The photon number probabilities of a coherent state form a Poisson distribution with mean . Alternatively normal ordering gives . Thus
The last ratio is defined only for nonzero . At large the absolute fluctuation grows but its size relative to the mean becomes negligible. This is the deterministic intensity limit within quantum optics; it does not assert the disappearance of vacuum-scale quadrature noise.
Orthogonality of the number states makes the coherent state norm an exponential series:
Using and reindexing ,
It is not an eigenstate of the creation operator. Indeed its supposed eigenvalue would have to be , from its expectation, whereas
This nonzero residual holds even at .
Put , allowing to be complex. The Hermitian electric field is . The annihilation operator and creation operator change photon number, so their diagonal matrix elements in a Fock state vanish. Since and ,
The terms containing or connect orthogonal number states and contribute zero. Even as grows, there is no definite oscillating mean electric field; its quadrature fluctuations grow instead. A Fock state can represent fixed field energy, but not a classical sinusoidal wave of prescribed wave phase. This is distinct from representing a classical field with a randomly averaged phase.
A double heterostructure laser places a lower-band gap active layer between wider-band gap layers with suitable type-I band alignment. The band offsets confine injected electrons and electron holes in the same small volume, increasing their overlap and reducing escape. Usually the active layer also has larger refractive index, so the same sandwich forms an optical waveguide. Optical confinement increases the gain-overlap factor , while carrier confinement lowers the injection needed to reach the required quasi-Fermi-level splitting. These two distinct mechanisms reduce threshold current and heating. A band gap difference alone does not establish the sign of both confinement barriers; suitable band offsets are essential.
Adjacent longitudinal cavity modes obey . Neglecting optical dispersion in estimating their spacing,
Hence the gain interval accommodates
possible longitudinal cavity modes. The exact integer depends on the positions of the interval endpoints and resonances. This counts available resonances; mode competition and actual laser threshold can reduce the number that oscillates. More accurately, the spacing uses the group refractive index instead of .
A broad multimode spectrum suffers differential delay through optical fiber group velocity dispersion, broadening transmitted pulses. Near , ordinary silica optical fiber attenuation is also larger than in the long-distance windows near and . These limitations concern this short-wavelength, simple multimode device: suitably engineered single-frequency semiconductor lasers at telecommunications wavelengths are useful communication sources.
For a vertical interband transition, the crystal momentum is effectively unchanged because the photon momentum is small. A stimulated downward transition needs an occupied upper state and an empty lower state, with factor ; upward photon absorption has factor . The two matrix elements agree by microscopic reversibility. Their difference is therefore
A common slowly varying transition-strength factor is implicit. Broadening replaces the sharp transition by a convolution; multiple valence bands contribute separate terms.
For one isotropic pair of parabolic energy bands, write
Thus . Including the usual twofold spin degeneracy, the number of paired states per volume inside a sphere of radius is . Differentiating with respect to transition energy gives the three-dimensional parabolic interband joint density of states
For density per angular frequency, . Stating the density convention avoids a missing factor of ; other degeneracies multiply the formula.
At a common carrier temperature, the Fermi-Dirac distribution is a strictly decreasing function of . The direct-gap semiconductor gain condition follows:
The lower inequality denotes a transition above the ideal band edge, where the displayed joint density of states is nonzero. Thus quasi-Fermi-level splitting must exceed the transition photon energy. Equality is transparency, rather than net amplification; at zero temperature an allowed transition must also lie within the occupied-electron and empty-valence windows.
A forward-biased p-n junction injects electrons from its n-type semiconductor and electron holes from its p-type semiconductor into an active region. A direct band gap allows radiative transitions without a compensating phonon, so stimulated emission can compete effectively with nonradiative processes. At thermal equilibrium there is one Fermi level; forward injection instead establishes separate electron and valence-electron quasi-Fermi levels and . Sufficient injection makes conduction states more occupied than the corresponding valence states, producing optical gain.
Two parallel cleaved facets supply an optical resonator. At normal incidence their approximate intensity reflectance follows the Fresnel equations:
A resonant normal mode grows when its round-trip amplification exceeds its losses. For length , material optical gain , overlap factor , internal intensity loss and facet reflectances ,
The pump supplies the emitted energy; the facets provide feedback and let some output escape. Positive optical gain alone does not establish laser threshold.
Figure 1.
Injected laser diode levels and the first additional guided spatial mode
. Original schematic: the left panel uses stipulated energy units to distinguish equilibrium and injected quasi-Fermi levels, with an allowed downward optical transition. The right panel plots , whose first zero fixes the weak-guidance spatial-mode cutoff. The separate panels do not represent a shared spatial coordinate. Details.
The optical success probability of a fourfold GHZ source depends on the photon-number statistics of the assumed two-pair input. Let be the probability that arm contains one and one , given two pairs. The beam splitter then puts one of the two photons into each output with probability , and the final polarization-parity selection succeeds with probability . With ideal photodetectors,
For the normalized, fully overlapping two-pair component of polarization-entangled down-conversion used above, , so the squared norm of the accepted component gives . Treating the two emissions instead as independently labelled Bell pairs gives the commonly used bookkeeping estimate and . This is a different pair-statistics approximation; it must not be obtained by dropping labels from an input state without renormalizing it. Genuine GHZ state coherence additionally requires erasing information about the pair of origin.
Let be the two-pair probability per pulse and the pulse repetition rate. The coincidence rate is . With the usual order-of-magnitude estimate , the supplied and give . The fully overlapping model gives , about one event per twelve seconds; independent-pair bookkeeping gives , about one per eight seconds. Thus the estimate is of order under these idealizations.
An exact prefactor cannot follow from the single-pair probability alone. For example, the pair-number statistics of polarization-entangled down-conversion in a single collected mode pair give at weak gain, and hence with . Multiple temporal or spectral modes change those statistics. Real collection losses and detector efficiencies further reduce the rate; they are excluded by the ideal calculation.

Pinned article: Introduction to the OurBigBook Project

Welcome to the OurBigBook Project! Our goal is to create the perfect publishing platform for STEM subjects, and get university-level students to write the best free STEM tutorials ever.
Everyone is welcome to create an account and play with the site: ourbigbook.com/go/register. We belive that students themselves can write amazing tutorials, but teachers are welcome too. You can write about anything you want, it doesn't have to be STEM or even educational. Silly test content is very welcome and you won't be penalized in any way. Just keep it legal!
We have two killer features:
  1. topics: topics group articles by different users with the same title, e.g. here is the topic for the "Fundamental Theorem of Calculus" ourbigbook.com/go/topic/fundamental-theorem-of-calculus
    Articles of different users are sorted by upvote within each article page. This feature is a bit like:
    • a Wikipedia where each user can have their own version of each article
    • a Q&A website like Stack Overflow, where multiple people can give their views on a given topic, and the best ones are sorted by upvote. Except you don't need to wait for someone to ask first, and any topic goes, no matter how narrow or broad
    This feature makes it possible for readers to find better explanations of any topic created by other writers. And it allows writers to create an explanation in a place that readers might actually find it.
    Figure 1.
    Screenshot of the "Derivative" topic page
    . View it live at: ourbigbook.com/go/topic/derivative
  2. local editing: you can store all your personal knowledge base content locally in a plaintext markup format that can be edited locally and published either:
    This way you can be sure that even if OurBigBook.com were to go down one day (which we have no plans to do as it is quite cheap to host!), your content will still be perfectly readable as a static site.
    Figure 5. . You can also edit articles on the Web editor without installing anything locally.
    Video 3.
    Edit locally and publish demo
    . Source. This shows editing OurBigBook Markup and publishing it using the Visual Studio Code extension.
  3. https://raw.githubusercontent.com/ourbigbook/ourbigbook-media/master/feature/x/hilbert-space-arrow.png
  4. Infinitely deep tables of contents:
    Figure 6.
    Dynamic article tree with infinitely deep table of contents
    .
    Descendant pages can also show up as toplevel e.g.: ourbigbook.com/cirosantilli/chordate-subclade
All our software is open source and hosted at: github.com/ourbigbook/ourbigbook
Further documentation can be found at: docs.ourbigbook.com
Feel free to reach our to us for any help or suggestions: docs.ourbigbook.com/#contact