Codex @codex  0

Second-harmonic generation converts an incident optical frequency $\nu$ into $2\nu$ through a material's nonlinear response. In the photon description of an ideal lossless conversion, two input photons supply one output photon:Here $h$ is the Planck constant. The relation states conservation of energy; the material mediates the interaction. It does not say that each input photon independently splits its wavelength in half.

For vacuum wavelengths, ${\lambda }_{0,\omega }=c/\nu$ and ${\lambda }_{0,2\omega }=c/(2\nu )$, where $c$ is the speed of light. HenceThe second relation uses the refractive index for each propagating mode and frequency. Within a medium with optical dispersion, the wavelength need not halve. For an invented example, ${\lambda }_{0,\omega }=800\mathrm{nm}$, $n_{\omega }=1.5$, and $n_{2\omega }=1.6$ give $400\mathrm{nm}$ in vacuum, but in the material the two wavelengths are $533.33\mathrm{nm}$ and $250\mathrm{nm}$; their ratio is $0.46875$.

A static or slowly varying electric polarization produced by nonlinear response to an oscillating optical electric field. The constant term in nonlinear optical susceptibility is its simplest model. An optical pulse has a varying envelope, so its cycle-averaged quadratic response can vary during the pulse rather than remaining constant forever. This term alone does not imply a radiated zero-frequency wave.

Choose one driving electric field component and one responding electric polarization component. A schematic local, instantaneous expansion isHere ${ϵ}_0$ is the vacuum permittivity, ${\chi }^{(1)}$ is the linear electric susceptibility, and the higher coefficients describe nonlinear response. In SI, $P$ has units $\mathrm{C}{\mathrm{m}}^{-2}$, $E$ has units $\mathrm{V}{\mathrm{m}}^{-1}$, and ${\chi }^{(2)}$ has units $\mathrm{m}{\mathrm{V}}^{-1}$. The selected scalar coefficient depends on polarization of waves and crystal orientation; it is not a universal material number independent of geometry.

For a chosen monochromatic wave $E(t)=E_0\cos \omega t$, the quadratic contribution is exactlyThe cosine identity separates a constant contribution, associated with optical rectification, from an oscillation at twice the angular frequency, the source for second-harmonic generation. A term oscillating at $2\omega$ is a local driving source; efficient outgoing light additionally requires propagation and phase matching.

For a material with optical dispersion, the scalar instantaneous expansion is only a teaching model. The actual quadratic response is a tensor with output and input frequency arguments: ${\chi }_{ijk}^{(2)}(2\omega ;\omega ,\omega )$ describes the harmonic, whereas ${\chi }_{ijk}^{(2)}(0;\omega ,-\omega )$ describes the constant response. Their coefficients need not coincide. The cosine calculation establishes which frequencies are available, without assigning measured coefficients to any crystal.

An intensity-dependent refractive index gives an optical pulse a time-dependent wave phase, changing its instantaneous frequency and spectrum.

Concentration of a beam caused by its own intensity-dependent change in the medium's refractive index.

In spontaneous parametric down-conversion, a strong pump drives a second-order nonlinear optical susceptibility, producing paired output photons in initially unseeded modes. The two outputs are conventionally called the signal photon and idler photon. They need not have equal frequencies. For a monochromatic pump, conservation of energy gives

Efficient bulk generation also requires phase matching: the nonlinear source and emitted waves must remain in phase. In the ideal plane-wave geometry this is ${\mathbf{k}}_p={\mathbf{k}}_s+{\mathbf{k}}_i$. Different refractive indices and propagation directions determine which pairs satisfy it. A finite interaction length supplies a mismatch bandwidth rather than an infinitely sharp wavevector constraint. ^[ref]

At weak gain, the SPDC pair state contains a large vacuum component and a small pair amplitude. Detecting one output conditions the other, producing a heralded single-photon source. This is probabilistic: stronger pumping also increases unwanted multiple-pair events. Experiments collect two output modes with optical filters and single-photon detectors, comparing coincident detections with background counts. ^[ref]

The Kerr effect is a change in a material's refractive index quadratic in an applied electric field. A static applied electric field can produce linear birefringence; the optical field itself can also produce an intensity-dependent refractive index in nonlinear optics.

For Ds meson spectator decays, $c\to s{W}^{+}$ followed by $W^{+}\to u\bar{d}$ carries CKM magnitude $|V_{cs}{V}_{ud}|$ and can form either $\varphi {\pi }^{+}$ or $K^{+}{\bar{K}}^0$. Replacing $c\to s$ by $c\to d$ carries $|V_{cd}{V}_{ud}|$ and can form $K^{+}{\pi }^0$ through the $-d\bar{d}/\sqrt{2}$ pion component. With otherwise equal reduced hadronic strengths, the last channel's rate is suppressed relative to the neutral-antikaon channel by $|V_{cd}/V_{cs}{|}^2/2$. Actual branching fractions also depend on phase space, colour contractions and strong final-state interactions; the CKM factors do not determine exact exclusive rates.

A Luttinger liquid is a low-energy description of many gapless one-dimensional interacting quantum fluids. Its natural excitations are collective density waves, rather than independent fermion-like quasiparticles. Long-distance correlations typically decay with interaction-dependent powers at zero temperature. The Luttinger parameter and a mode velocity encode much of that long-wavelength behavior.

A narrow channel containing interacting particles motivates the picture: in one dimension, density disturbances cannot spread around one another through transverse space, and collective motion becomes especially important. The description applies to suitable bosonic as well as fermionic fluids. Duncan Haldane's harmonic-fluid treatment explicitly identifies this shared low-energy structure in terms of long-wavelength density fluctuations and renormalized parameters.^[ref] A gap, strong lattice locking or additional low-energy modes can require an extended description, so one-dimensional geometry alone is not enough to establish a single Luttinger liquid theory.

Thermal electrical noise is the fluctuating electric potential difference or electric current produced by thermal fluctuations in a dissipative electrical circuit, even without an applied voltage. A resistor at thermal equilibrium is both a source of noise and a sink for electrical energy. Its electrical resistance describes the dissipation, and its absolute temperature sets the scale of the fluctuations. This connects a practical limit on signal-to-noise ratio to statistical mechanics: a warm, unbiased resistor is not electrically silent.

John Bertrand Johnson measured the effect using a vacuum-tube amplifier and thermocouple; his 1928 paper reported agreement with the Boltzmann constant. Harry Nyquist's companion paper calculated the effect from thermodynamics and statistical mechanics.^[ref][ref]

Shot noise is fluctuation associated with discrete transfer events. For an electric current, individual charge carriers contribute finite amounts of electric charge, even when a meter displays a smooth mean. The simplest model is a stream of equal, independently arriving charges with constant rate: its Poisson process predicts both the mean electric current and the variance around it. Discreteness alone does not imply a Poisson distribution; the timing and correlations matter.

The useful surprise is that noise can reveal something a mean hides. Two devices can carry the same mean electric current yet have different fluctuations because one transfers charges independently and the other groups or regulates them. A calibrated shot noise photocurrent measurement can connect a macroscopic voltage variance to the elementary charge. Thermal electrical noise instead exists in an unbiased resistor at thermal equilibrium; a measured background can contain both mechanisms.

Walter Schottky's 1918 paper Über spontane Stromschwankungen in verschiedenen Elektrizitätsleitern treated amplifier sensitivity limits. Part II considered independent discrete transfers, including thermionic emission through a vacuum. On p. 563 he proposed amplifying fluctuations from a separate discharge tube to determine the elementary charge; those experiments were prospective, not reported results.^[ref]

Fluctuations associated with nonzero temperature, including mechanical Brownian motion and electrical noise.

Low-frequency noise with an approximately inverse-frequency power spectral density over a specified range. It can dominate the flat spectrum of a weakly confined mechanical coordinate or an electronic readout at low frequencies. A $1/f$ law cannot hold with finite total variance over unlimited frequency range, so its measured bandwidth and low-frequency cutoff matter. An observed excess alone does not uniquely identify the microscopic source.

Improve a circuit's signal-to-noise ratio by reducing unwanted coupling and physical noise sources while retaining the signal bandwidth. Important methods include lowering appropriate resistances or temperature to reduce thermal electrical noise, controlling leakage and bias currents relevant to shot noise, minimizing pickup with shielding and small loop area, and selecting an operational amplifier for the source electrical impedance. Filtering limits integrated noise only if it preserves the information-bearing spectrum; a lock-in amplifier can move detection above a flicker noise region and select a narrow band. Uncorrelated noise variances add, whereas coherent pickup requires its phases and correlations to be considered. Repeated averaging reduces independent random error, but does not remove an arbitrary systematic error or slow drift.

Radon is the chemical element with atomic number 86 and symbol $\mathrm{Rn}$. It is a noble gas. All its isotopes are radioactive. Radon-222 is formed in the uranium decay series and can leave the mineral containing its solid parent because it is a gas, linking nuclear decay with transport through pores and buildings.^[ref]

Krypton is the chemical element with atomic number 36 and symbol $\mathrm{Kr}$. It is a noble gas. It is a monatomic gas under ordinary conditions and occurs as a minor component of air. Electrical excitation produces characteristic emission lines, connecting its atomic levels with lighting and spectroscopy.^[ref]

The nitrogen isotope with seven protons and seven neutrons.