Axisymmetric rotation about the offset axis gives wall velocity . Its azimuthal Couette flow has no pressure-driving divergence, so pressure remains constant. The fluid-on-inner-sphere tangential traction is . Multiply it by the moment arm and integrate:
Putting and using the second supplied identity with its generic parameter equal to gives the axial rotational resistance of eccentric nested spheres:
The continuous limit at is , consistent with a concentric narrow spherical shell. At , the torque tends to : it remains finite because the rotational wall speed vanishes at the closest pole.
Let the tangential velocity scale be , gap scale and along-gap length . The tangential Stokes equation balances with , while wall shear is . Therefore
This is lubrication pressure dominates shear stress; pressure force projections may nevertheless be small in a particular direction or may give no torque on a spherical surface.
Write the signed centre displacement along the downward axis as . A point on the inner sphere has distance from the outer centre. The leading normal gap to radius is consequently
The local-curvature corrections are smaller by . This approximation also follows by solving the outer-sphere intersection along the ray from the inner centre and expanding its positive root.
Write . The original PDF contains the cross product ; the TeX aid drops its velocity dot. Since , differentiation and the equation of motion give
The radial restoring force contributes no torque. The vector triple-product identity yields
Meanwhile
The derivatives cancel, proving
This is the magnetic axial angular-momentum invariant. Its first term is the negative of the ordinary angular momentum projected on ; retaining that sign is essential.
About a fixed inertial origin, the total angular momentum is . Differentiation gives
because . Separate the external and internal contributions. The combined torque of an internal pair is
The first equality uses Newton's third law, and the second uses the given central-force condition. All internal torques therefore cancel, leaving
An equal-and-opposite pair which is not central need not have zero combined torque; this explains why both internal-force hypotheses matter.
Use a steady axisymmetric flow governed by ideal magnetohydrodynamics and take the Newtonian gravitational potential to be axisymmetric. Work locally on connected regular magnetic flux surfaces with nonzero poloidal flow. As usual for a wind without an imposed toroidal loop voltage, ; regularity on an included rotation axis guarantees this condition. It is needed to exclude steady cross-field flow in an annular domain.
Since , the poloidal magnetic flux function gives
The poloidal magnetic field is divergence-free. The zero toroidal electric field, with , gives . Define by . Steady mass conservation then gives
Thus is the magnetohydrodynamic mass loading, the mass flux per unit poloidal magnetic flux. Subtracting from the full velocity leaves only an azimuthal component. The cross product is
The steady ideal magnetohydrodynamic induction equation requires . Consequently the field-line angular velocity is and
Neither gas pressure nor axisymmetric gravity exerts an azimuthal torque. Multiplying the azimuthal momentum equation by combines the cylindrical curvature terms into angular-momentum transport:
Insert and use . It follows that
so the magnetohydrodynamic angular-momentum invariant is
The two terms account respectively for matter and Maxwell stress tensor transport of angular momentum.
Finally, subtracting times the logarithmic mass density equation from the logarithmic pressure equation gives . The specific entropy of a fixed-composition ideal gas is a function of . Steadiness and axisymmetry reduce its advection to . Hence
These flux-label functions are local on connected regular surfaces; disconnected components with the same numerical label need not share constants without an additional matching condition.
Reflection symmetry gives . In a vertically stable thin disk, expand the vertical force as , where is the vertical epicyclic frequency squared. For local hydrostatic equilibrium and height-independent isothermal sound speed, and
Thus with . Integrating the pressure and mass density through the disk gives the vertically integrated pressure of an isothermal disk:
The force expansion is approximate in , while is exact for a height-independent sound speed.
In a nearly Keplerian disk, the vertical oscillation and radial epicyclic motion frequencies are close to the orbital frequency. The exact leading orbital differences are and , so
Thus is the nodal precession rate of a slightly tilted orbit, and is the apsidal precession rate of a slightly eccentric orbit. Their signs distinguish prograde from retrograde precession. This also agrees with the sign convention in the complex tilt: a freely precessing ring obeys .
For exactly Keplerian motion, , so and . In the local approximation, freeze the slowly varying coefficients and take . The inviscid warp equations of a nearly Keplerian disk become
Eliminating gives . Hence
These are bending waves of a Keplerian disk, carrying changes in orbital tilt. The local approximation needs wavelength small compared with ; the secular thin-disk warp equations also describe the long-vertical-wavelength regime .
For a nonspinning hole, gives . A steady disk warp then satisfies . The zero inner torque forces throughout, and the second warp equation, with positive , forces . The outer orientation fixes everywhere. An apsidal precession term by itself therefore does not require a tilt warp.
For nonzero spin, set the time derivatives to zero. The two equations give
Eliminating the internal torque yields
Use , , , and . The first coefficient becomes and the second becomes . Therefore
This is the stationary disk warp equation under the stated weak-precession approximations. The inner condition is when its coefficient is finite and nonzero, because .
Let , so , and impose , . Converting both radial derivatives carefully to and dividing out the common positive factor gives
or . For , introduce
Since is proportional to , the first-derivative term cancels exactly, leaving . Thus .
The outer boundary is , giving . The specified inner-radius relation is exactly . The inner zero-torque condition then gives . Hence the stationary bending warp of a Kerr disk is
The tilt magnitude is . Far out it tends to the imposed tilt. Moving inward, it decreases to zero at
then grows again with opposite signed tilt, reaching . All tilt vectors lie on the same line in the complex plane. Their azimuth is outside the node and differs by inside; azimuth is undefined at the aligned node itself. The tilt vector remains smooth there. Thus this is an oscillatory standing bending warp, with equal outer and inner tilt magnitudes and reversed inner orientation, rather than monotone inner alignment.
The prescribed real inner radius assumes : for , its square root is not real, so that particular boundary prescription does not apply. With a separately chosen positive inner radius and negative spin, put . The equation becomes , and the same outer tilt and zero inner torque give
This negative-spin solution decreases smoothly toward the inner disk without a sign reversal. The specified positive-spin solution is the cosine profile above; the case is the flat solution already derived.
Put and use reference cylindrical coordinates and current coordinates . The deformation map is , , . In the associated orthonormal bases its deformation gradient is
Its determinant is one, as required by incompressibility. The radial principal stretch is . The other two squared principal stretches are the eigenvalues of the tangential-axial block of :
Writing , they are
The positive square roots give , and .
The strain energy density is per reference volume, so the energy per height is
The work rates per height are from the end torque and from the inner pressure. The outer surface contributes no work because it is traction free, and the fixed height has zero axial work. Thus the virtual work identities for twist and inflation of an incompressible tube are
For a neo-Hookean solid, an irrelevant energy constant can be omitted:
Differentiating under the finite integral gives
An antiderivative divided by is . With , the neo-Hookean tube pressure under twist and inflation is therefore
It vanishes for an untwisted undeformed tube, and the twist contributes the last term at fixed radii.
Choose the helix handedness so its unit tangent is . Let ; the body rotates at , while the flagellum rotates at in the laboratory, since its relative motor rotation is . Both translate at . Thus the relative fluid velocity on a flagellar element is .
Low-Reynolds-number resistive-force theory gives force per unit length on the flagellum
Its axial and azimuthal components are
Define the integrated axial resistance matrix of a slender helix coefficients
The sphere has translational resistance by the Stokes drag law and rotational resistance . Its hydrodynamic force is and its torque . Integration of and gives the zero total force and torque conditions
Dividing the first by and expanding the coefficients gives exactly the two requested balances. The internal motor torque cancels in the total torque balance; it is not an external applied torque.
Eliminate and use . The effective flagellar rotational resistance is , so
The determinant of helical resistance in resistive-force theory is , hence the denominator is positive. Opposite handedness changes the sign of the translation-rotation coupling and reverses the swimming direction.
For , , and , the coefficients are , , . Therefore
Equivalently, with , . These are positive speed magnitudes for the selected handedness; the translational velocity is .
This helical microswimmer with a spherical head approximation neglects head-tail hydrodynamic interactions as permitted, treats the flagellum as slender and rigid, and averages away transverse forces associated with finite helical ends. The flow is quasistatic Stokes flow, so neither body inertia nor fluid inertia enters the balance.
Let and , with for the upward-stable orientation. Cell conservation in a swimming suspension gives radial flux
Regularity at the axis and impermeability at the wall imply , hence . Axial advection has no divergence in this fully developed, axially uniform state.
The fluid is incompressible. Use dynamic stresslet strength and dynamic viscosity first, so the swimming contribution to its stress is . The isotropic part can be absorbed into the effective pressure. With the ordinary fluid hydrostatic pressure removed, the axial momentum equation is
The final term is the downward excess weight of the cells. Sedimentation is neglected in their swimming flux, not in this buoyancy force. Fluid convective inertia vanishes for the specified fully developed velocity even before a low-Reynolds-number approximation is invoked.
There is a dimensional convention to make explicit. The printed definition of contains the extra fluid density . All the printed coefficients are consistent if this question uses density-normalized pressure, kinematic viscosity and stresslet strength:
Then generates the stated background Poiseuille flow. If and instead mean dynamic viscosity and a physical force-dipole strength, the correct buoyancy parameter is , without a further density denominator. The following derivation retains the consistent density-normalized interpretation of the printed parameters.
The bottom-heavy spherical-cell orientation dynamics is
Its scalar tilt equation is . Steady gravitational-viscous torque balance therefore gives . This equilibrium is stable on the branch and exists only when .
Put , , . Subtract the background pressure-driven balance and divide by . The governing system is
where
The last parameter contains , as in the PDF, not the diffusivity substituted by the converted TeX. Boundary and normalization conditions are
The wall cell-flux condition is already incorporated in ; there is no prescribed wall concentration or additional fixed-volume-flux condition. The radial divergence of the stresslet stress can be balanced by a radial pressure depending only on . It neither produces radial flow in this ansatz nor changes the imposed axial pressure gradient, so it is eliminated from the axial problem, not assumed to vanish.
For , , let , . The leading tilt has
The supplied ensures this leading orientation remains on the stable branch. Put . Integrating the concentration equation and imposing the average concentration gives the gyrotactic focusing in a downward pipe flow profile
At the continuous limit is .
At first order the axial equation is
Integrate from the regular axis, where both boundary terms vanish:
Since , the stresslet correction to gyrotactic pipe flow is
with its regular limiting value at , and
The orientation and concentration corrections, if needed to complete the expansion, follow without another differential boundary problem:
These enforce .
For , write the two positive integrand coefficients as and . Then
Thus throughout the interior for , and at any given radius a positive correction is possible only if
A simple sufficient condition for negativity is : indeed
When , the stresslet contribution vanishes and the buoyancy correction is negative regardless of .
Physically, downward shear tilts upward swimmers toward the axis, concentrating excess weight there and enhancing the downward flow. Positive in the specified stress convention reinforces this effect; sufficiently negative opposes it. A positive means reduced downward velocity, not necessarily reversal of the total pipe flow. The deterministic orientation closure fails at excessive shear, and scalar diffusivity neglects directional and shear-dependent dispersion.
From part (i), the steady mean has . Hence gives . Part (ii) gives the same mean as . Thus
Both limiting distributions concentrate weakly at the upward pole. A common limiting mean does not identify their finite-time distributions or the order in which the limits are taken.
Time scales must be compared at a specified accuracy. The exact deterministic solution approaches the limiting mean with deficit : its alignment scale is , with exponential late scale . For weak but nonzero diffusion, linearize about the upward direction using the two transverse tilt components . They obey the Ornstein-Uhlenbeck process
The stationary angular variance is , and nearby axisymmetric variance perturbations decay on to leading weak-noise order. This is weak-noise relaxation of gyrotactic alignment: the aligning torque, not the pure rotational-diffusion time , controls the weak-noise alignment rate.
Nevertheless the full relaxation times are not identical. Finite diffusion leaves mean deficit approximately , whereas deterministic alignment has no such floor. Starting from isotropy, reducing the transient deficit to that tiny floor requires , or
with smaller logarithmic corrections. The two limits have the same mean and the same order- weak-noise alignment mechanism, but not identical transients or accuracy-dependent settling times. No finite time achieves the exact deterministic point-mass limit; positive diffusion never gives that exact point mass at all.
Let be the uniform mass density. In spherical coordinates with the chosen diameter as polar axis, the squared perpendicular distance to that axis is . The moment of inertia is therefore
This derives the moment of inertia of a uniform solid sphere about any central axis by spherical symmetry.
Put . The center of mass follows the circle of radius , with position . Let and . Its velocity is , and the contact point is displaced from the center of mass by . With positive spin angular velocity counterclockwise, its contact-point velocity is
The cylinder is fixed, so rolling without slipping requires this velocity to vanish. Consequently . If instead the spin angle is positive clockwise, opposite to increasing , then the printed positive-coefficient convention is
The spin and orbital rotation have opposite directions when both are measured about the same oriented axis; the angular speed is . This specifies the sign convention in the printed expression.
The instantaneous contact point is at rest, so the normal reaction and static friction do no work. Conservation of energy equates the loss of gravitational potential energy from release to the total kinetic energy:
On the descent from , decreases, so
Integrating from release to the bottom gives
The integral is finite: at the release point its denominator is asymptotic to . Contact is maintained, since the inward radial equation of motion gives the positive normal reaction throughout this range.
For frictionless sliding, the normal reaction passes through the sphere's centre and produces no torque; Newtonian gravity also exerts no central torque. With initial zero spin, the sphere remains nonrotating. All the lost gravitational potential energy becomes translational kinetic energy, so
A hollow spherical shell of the same mass and radius places its material farther from the centre, giving a larger moment of inertia. Under rolling without slipping, a given centre speed therefore requires more rotational kinetic energy; the same gravitational drop yields a smaller speed. Replacing the solid sphere by a hollow shell increases and leaves unchanged. The sliding case remains nonrotating and has the same center of mass path and gravitational drop. This is the general comparison for rolling inside a fixed circular cylinder.
Assume an axisymmetric, geometrically thin disc in a fixed Keplerian rotation field, neglecting the disk's self-gravity. Write positive outwards and let
The ring supplies the local specific angular momentum. Its source per unit area is
where the Dirac delta function is normalized so that . Define the positive outward viscous torque in an accretion disk by
The height-integrated conservation of mass and conservation of angular momentum equations are
Subtract times the mass equation. Since is time-independent, this gives
The last term is zero as a distribution, because the source is supported where . Since , substituting the torque gives
Inserting this into the mass equation proves the Keplerian disk evolution with a ring source:
The viscosity may be a prescribed function or a function of the local disk state; the conservation derivation is the same.
To track signs in the steady problem, define the inward mass flux
Then . Away from the source is constant, with on the inner side and on the outer side, where both loss rates are positive. Integrating through the source gives . Therefore
The outward angular momentum flux is . The steady angular-momentum equation gives . At the two torque-free boundaries its values are and . Integrating across the disk therefore yields
Eliminate and use . The two-boundary mass split of a ring-fed disk is
The complementary outward fraction is . Both fractions lie between zero and one for a source strictly between the boundaries.
As a local check, integrating the steady mass flux from each zero-torque boundary gives
Continuity of this quantity at gives the same split. The split depends on boundary and source angular momenta, rather than on the detailed viscosity law.
The conserved total angular momentum is , and the black-hole spin magnitude is
The initial hole is noncollinear with the total vector, so persistent positive alignment torque leads to the positive direction. The final vectors are
The final disk magnitude is , smaller than its initial magnitude one, and its direction is parallel to the hole. Their sum remains .
Here the conserved total angular momentum is , while the black-hole spin magnitude remains . The hole again aligns with the positive direction in the persistent-torque regime. Thus
Since , the disk points in the negative direction and has magnitude . This realizes counteralignment of a black hole and accretion disk even though the hole itself is aligned with the conserved total vector. The black hole and disk do not always finish with aligned spins.
Each annulus has a torque proportional to , so its scalar product with is zero. Summing over annuli preserves this property even when the proportionality coefficient varies with radius. Therefore for the total torque due to Lense-Thirring precession.
The torque specified is the torque on the disk. Assuming a closed disk-plus-hole angular-momentum budget with no external torque, its reaction on the black hole has the opposite sign:
Thus . The term describes precession, because it is perpendicular to both spins. Since , the hole precesses about the fixed total vector. The term changes the spin directions dissipatively. Writing for the disk component perpendicular to the hole, the vector triple product identity gives
A positive removes this component from the disk and transfers it into the hole's changing direction. This is black-hole and disk alignment under internal torque.
Since is perpendicular to ,
Hence , even if the torque coefficients vary in time.
Now differentiate the scalar product with the conserved total vector. The precession term contributes zero, and the vector triple product identity gives
Also , so constancy of gives
Finally, is constant. Differentiating proves
Thus the disk's spin magnitude decreases while the hole's magnitude is fixed; their vector sum remains fixed as well.
For the alignment conclusion, assume and let . Since ,
For a noncollinear initial state, , this integrates exactly to
Consequently a fixed positive , or more generally a positive coefficient of divergent integrated strength, gives . In this persistent dissipative evolution, : the hole aligns asymptotically with the total angular momentum. The exactly antiparallel configuration is a stationary, nongeneric exception; when there is no total-vector direction to align with.
If the phrase allows arbitrary time dependence, positivity alone does not logically force complete eventual alignment. The persistent-torque criterion for asymptotic spin alignment is the needed qualification. For example, take , , and . The same torque equations give , with limit . The final configurations below use the intended persistent-torque regime, including constant positive .
Once the hole has aligned, conservation of angular momentum fixes the disk without any additional torque calculation:
The disk and hole therefore finish parallel only if . If , they finish antiparallel: this is counteralignment of a black hole and accretion disk. In terms of the initial disk-hole angle , squaring shows that counteralignment occurs when
If , the final disk angular momentum vanishes and has no spin direction. Thus alignment of the hole with the total vector does not imply alignment of both component spins.
For a force acting on an unbounded incompressible fluid, the Stokeslet and its pressure are
They solve and . Approximate a slender body by a line distribution of these point forces on its centreline. At a point labelled by arclength ,
To extract the large logarithm, write and approximate , , where is the unit tangent vector. The near-line contribution has kernel . Cut it off at the wire radius and a macroscopic length . The two sides of the line give
The far contribution and changes in the cutoff add terms without the leading logarithm. Since , inversion proves the leading slender-body force density
This is force on the fluid; the fluid's force on the wire has the opposite sign. It gives twice the resistance to transverse motion as to tangential motion at this order.
The stated arclength describes the circular helix . The PDF omits the second in the coordinates, so the literal printed curve and its arclength are inconsistent unless . First use the circular interpretation consistent with the given arclength. Put and . Then
Rotation about has velocity , so . The axial force density is . Integrating over one turn gives
For translation, and . Only the tangential term contributes to axial couple. Since , its density is , giving
These are the off-diagonal coefficients of the axial resistance matrix of a slender helix. Their equality does not depend on this particular geometry: with symmetric local resistance , the rotation-induced axial force is , whereas the translation-induced axial torque is . They agree pointwise by symmetry of . The full Stokes-flow statement is the Lorentz reciprocal theorem.
For completeness, retaining the literal elliptic helix instead gives and the axial coupling of an elliptic helix
Thus reciprocity holds for the literal curve as well; only the geometric coefficient and arclength change. In all these formulas the equal and opposite force or couple on the wire reverses the displayed sign.
For the complete uniform disc, the surface density is . An annular strip of radius and thickness has mass , so its contribution to the axial moment of inertia is . Hence
This derives the moment of inertia of a uniform disc rather than assuming it.
Removing a concentric disc of radius at the same density removes mass and inertia . The remaining annulus therefore has mass and
The moment of inertia of a uniform annulus gives the same value directly.
Let be the downhill centre-of-mass acceleration and let denote the magnitude of the uphill static friction. Translation, rotation about the centre, and rolling without slipping give
Thus . Eliminating gives the rolling acceleration with rotational inertia
Substitution gives the contact forces
The normal force balances the perpendicular component of gravity because the centre remains at a constant distance from the plane. Although the annulus accelerates downhill, friction must act uphill to supply the torque that increases its rolling angular speed. For a plane with , the assumed no-slip motion requires a coefficient of static friction satisfying . With that condition, contact friction does no work because the instantaneous contact point is stationary; it redistributes the gravitational energy between translational and rotational kinetic energy.
The particle's angular momentum about the force centre is . A central force exerts zero torque about that centre, so
By conservation of angular momentum, is a constant vector. If it is nonzero, the identity places every point of the orbit in the fixed plane through the centre perpendicular to :
If , position and velocity are parallel. Away from the force centre, , so the motion is radial along a fixed line, which lies in any plane containing that line. Thus the zero-angular-momentum case also gives planar motion. As usual, these assertions apply while the force law supplies a regular orbit; continuation through a singular force centre is a separate issue.
Since the donor fills its Roche lobe, use and substitute its equilibrium mass-radius relation into the lobe approximation:
Kepler's third law then gives
so the Roche-lobe period-mass relation for a linear donor radius law is
The total binary mass cancels, rather than being assumed equal to the white-dwarf mass.
The orbital radii about the center of mass are and . Summing the two orbital angular momenta gives
With transferred matter retained by the accretor, total mass is fixed. Logarithmic differentiation gives
For , the separation response is . Since at fixed total mass,
The second relation uses the supplied equilibrium donor sequence. As the donor loses mass, . If , its Roche lobe shrinks fractionally faster than this donor radius, so the excess filling increases and drives more transfer: it is positive feedback. If , infinitesimal loss instead reduces overfill on that assumed sequence, so some continuing driver is needed to retain contact.
There are two limits to the literal dynamical interpretation. The given initial range is , so is an extrapolated instability test, not a state inside that range. Also, a true dynamical stability of binary mass transfer test needs the donor's adiabatic stellar radius response exponent , rather than its thermal-equilibrium exponent. In general,
Thus is the result for the assumed response. A fully convective idealized donor has , giving a dynamical threshold , already below . The equilibrium radius law alone should not be used to assert a universal dynamical threshold.
One continuing driver is magnetic braking of a binary star. A magnetized wind carries away the donor's spin angular momentum; tides that maintain near-synchronous rotation replenish that spin from the orbit, removing orbital angular momentum. With an external , the lobe response becomes
Equating this to the donor response proves the binary mass-transfer contact equation in this model:
A negative torque therefore drives mass loss while maintaining contact for , subject to the chosen donor response and braking assumptions.
To obtain the specified expansion, use the usual nova-ejection prescription: the escaping material is expelled isotropically from the white dwarf and carries its specific orbital angular momentum, with no additional torque. This is isotropic re-emission from a binary star. Circularity alone does not determine the angular momentum carried by the ejecta; the prescription is an additional physical assumption.
The accretor's orbital radius is , so its specific angular momentum satisfies
During ejection, take , and , where . Consequently
Differentiate to first order:
Using yields
The same lobe law now has changing total mass but unchanged donor mass, so
The donor radius is unchanged on the short eruption timescale, whereas its lobe expands. It therefore falls inside the lobe and Roche-lobe overflow stops in this idealized model. This is nova-induced binary detachment.
The need for the ejection prescription can also be seen algebraically. If the ejecta instead have mean specific angular momentum , the same circular-orbit differentiation gives
The requested coefficient is obtained only when . Other prescriptions can produce a different expansion or a contraction; the stated circularity condition does not rule them out. The ejection may be short compared with the transfer time while remaining slow compared with an orbit, consistent with circularity. If truly impulsive, an eccentricity is generally excited unless an additional circularization assumption is made.
Now put for the constant external torque. Keep the masses, mass ratio and torque coefficients fixed to leading order over one small- cycle; corrections in those coefficients affect the calculated times only at the next order. During detachment there is no transfer, so fixed component masses give
The fractional lobe gap closes in time
During the semi-detached accumulation phase, use the same external torque and the equilibrium donor contact equation derived in (a):
Accumulating the next layer therefore takes
Division cancels the layer mass, torque and angular momentum:
The result uses for a positive steady accumulation rate, unchanged donor structure during the eruption and the same external torque in the two phases. Here the given ensures a positive denominator. It describes an idealized nova cycle; extra frictional loss, irradiation-driven donor changes or a different ejection angular momentum would change the ratio.