Put . In the Unscaled Papkovich–Neuber representation, choose the componentwise harmonic vector field
Both and are harmonic away from the origin: the latter is a linear combination of derivatives of the harmonic function . Also , so the representation gives . The no-slip boundary condition requires and , giving
Thus the Rotational Stokes flow between concentric spheres is
The divergence of is zero: the cross-product field itself has zero divergence, and is radial and perpendicular to . Hence in this pressure gauge.
There is also a symmetry argument. Take the rotation axis as the polar axis. Linearity of Stokes flow makes velocity and pressure perturbations change sign when the rotation reverses. Reflection in any plane containing that axis reverses the axial rotation vector. Combined with axial symmetry, this excludes meridional velocity components and forces the pressure perturbation to be both unchanged and sign-reversed by that reflection. Equivalently a purely azimuthal axisymmetric Stokes flow has no meridional component of its vector Laplacian, so its meridional pressure gradient vanishes. Thus the pressure is constant; setting that arbitrary constant to zero gives the same result without solving the radial coefficients.
For the Newtonian fluid stress tensor, let . The symmetric part of the velocity gradient is
because the gradient of rigid rotation is antisymmetric. Consequently the full stress tensor, with , is
For , its only nonzero spherical-coordinate components are . On the inner sphere the traction exerted by the fluid, using the sphere's outward normal , is
Its torque is
using . Therefore the applied Torque in rotational Stokes flow between concentric spheres is
For , the relevant speed and length are and , so negligible inertia requires the rotational Reynolds number
For a narrow gap , the viscous gradients are controlled by , not . A centrifugal acceleration of scale is then compared with viscous scale , rather than . Their ratio is . This explains why the large-gap condition is not a necessary narrow-gap criterion; a thin gap greatly strengthens viscous resistance. This base-flow scaling is distinct from a criterion for stability to arbitrary short-scale disturbances.
The Minimum-dissipation theorem for Stokes flow compares a Stokes solution with all sufficiently regular incompressible trial velocities in the same fluid domain that have the same prescribed boundary velocities. With no body-force work, the dissipation functional is
If and on the prescribed boundary, integration by parts with and makes the cross term vanish. Thus
The comparison fixes velocities, rather than applied torques or forces.
Now let the particles take their actual rigid translations and rotations in the particle-containing flow. Extend the fluid velocity through each particle by its rigid velocity. No-slip boundary conditions make this extension continuous; rigid motion has zero rate-of-strain tensor and zero divergence. The extension is therefore an admissible trial field in the original particle-free annulus, and its dissipation equals that of the fluid outside the particles. Hence .
The Stokes boundary-work identity gives . The outer sphere is stationary, the maintained inner sphere has zero translational velocity, and every added particle has zero total force and torque, so none of those other boundaries contributes power. Likewise . Therefore
For nonzero rotation and a particle of positive volume the inequality is strict: equality in the dissipation identity would force the extension to be the unique original flow, but that original flow has nonzero strain on every open particle region, whereas a rigid interior has zero strain. This proves that force-free inclusions increase rotational resistance:
No dilute-suspension approximation or assumption about the particle shapes was used.
Write , , and use the usual reduced rigid-recoil representation , with zero initial recoil and a smooth stroke returning and to zero. For this representation,
Define the fluid impulse and its first moment by
The force law from part (i) gives, by integration by parts,
These are the endpoint momentum flux in elongated-body recoil. Put
The endpoint quantities are needed in addition to the integrals unless further end-shape assumptions are made. Lateral force and yaw torque balance are
Expanding gives the requested simultaneous second-order equations, with the retained endpoint fluxes:
Substituting and integrating once from the initially straight, unrecoiling state yields
These are first-order coupled equations for with known forcing.
The claimed mass-independent final angle requires a qualification. Let
After the stroke, and . If the post-stroke dynamics are stable, the first-order system relaxes to
Let . Solving this two-by-two system gives
This is quadratic-bend turning with finite body mass. At the limiting state , so . The forward velocity is in the chosen direction, and its lateral component has precisely the body's slope: the fish glides parallel to itself. The angle is generally reached after a relaxation transient, not necessarily immediately at .
The advertised result is obtained in the thin-body approximation that neglects relative to fluid added mass, or in the special geometry :
For example, take negligible nose added mass and nonzero tail added mass , so . In the zero-body-mass approximation, the post-stroke equations for are homogeneous. The inertia matrix is positive definite by Cauchy-Schwarz inequality, and
The two eigenvalues of therefore have positive real parts: their sum and product are positive, whether they are real or conjugate. For the transient decays, proving parallel gliding and the displayed turn in this approximation.
With finite , the angle is not a consequence of the printed force law for arbitrary . A concrete stable counterexample uses , , and . Then , , , , , and . Hence
which differs from for positive body mass. This example has positive determinant and positive matrix trace of the relaxation matrix. Another immediate check is that if both endpoint added masses vanish, integrating the force law conserves total lateral momentum. A finite-mass fish cannot then end with and a nonzero new transverse velocity. Thus endpoint and inertia assumptions cannot silently be omitted.
If is literally the centre of mass position of a deforming body, use a mass-centered deformation rather than the raw quadratic. For body mass density , its mean is , with ; in the slender approximation . The reference translation above is then . Likewise the active angular momentum contains , where , which vanishes for symmetric mass distribution. These corrections modify derivative forcing during the stroke. Since the shape and its time derivative return to zero, they do not remove the finite-body-mass qualification of the final impulse relation.
The principal physical limitations are small slopes and small total turning angle, prescribed approximately constant forward speed, slowly varying slender geometry, and neglected viscosity, separation and detailed three-dimensional wake interactions. Fast large-amplitude C-starts need more than this linear theory. Neglecting body mass is most reasonable for a laterally thin body whose crossflow added mass greatly exceeds its displaced mass. Stable relaxation also requires an appropriate tail/end geometry; it is not guaranteed for every added-mass profile.
The cell conservation equation has the form , with
The first term is advection by the suspension's fluid velocity, the second is active swimming at fixed speed in direction , and the last is an isotropic diffusive flux due to random swimming. Here has units length squared per time, is cell number per volume, and the divergence measures local loss by transport. No birth or death term is included.
For a spherical cell of radius , its excess buoyancy force is . The Stokes drag law gives passive settling speed . Neglecting individual settling requires , not exact neutral buoyancy. A dilute suspension can still generate appreciable collective buoyancy because many small excess masses contribute to the bulk density.
Use the half-rate convention for the gyrotactic reorientation time , required by the coefficients printed in the question:
The first torque tends to point the bottom-heavy cell upward; the second rotates a sphere with half the fluid vorticity. This is a quasistatic torque balance, assuming orientation relaxation is fast enough to follow the local flow. Keeping orientation dynamics instead would put on the left. The convention with aligning rate uses a reorientation parameter twice this . Thus the factor of two is a definition, not a physical discrepancy. Close to the upward state the quasistatic gyrotactic balance with half-rate reorientation gives .
For a dilute Newtonian suspension with the Boussinesq approximation, the other equations are
The background-water hydrostatic pressure is absorbed in . The cell volume is , density is , cell density is , dynamic viscosity is , and is the volume fraction. Extra cell mass produces the downward buoyancy term. Constant viscosity and no explicit swimming stress are part of this closure. Rigid impermeable plates impose no-slip boundary condition and zero normal total cell flux.
At rest, the stable cell direction is upward and the steady vertical flux is . It is constant in depth by conservation and zero at an impermeable plate, so
The pressure gradient balances its excess weight. The mean-concentration formula follows by averaging over and is continuous at .
Use , , , , and . Then
where
The dimensionless base concentration is .
Linearize with the horizontal Fourier mode and . Write the first-order orientation perturbation as . Unit length gives , while torque balance gives . Incompressibility implies
Let . The perturbation of fluid advection is , and swimming contributes . Cell conservation therefore gives
or
This explains the destabilizing concentration-advection term and the gyrotactic redistribution term with their signs.
To eliminate pressure from the fluid equations, take their divergence, giving . Apply to the vertical equation . The concentration second derivatives cancel, leaving
No-slip conditions give and at each plate; for nonzero , the latter follows from the vanishing horizontal velocity and incompressibility. Zero perturbed normal cell flux gives
The normal orientation correction is zero at this order, and the fluid velocity is zero at the plate, so neither adds another term to this concentration condition.
Now use the stated distinguished scalings , , , , , and . Here is a scaled wavenumber, unrelated to Question 2's shear rate. At order one, the concentration equation and boundary conditions give , at both endpoints, so is constant. Absorb its nonzero value into the perturbation amplitude and choose
At order , the fluid equation is with at both ends. Its unique solution is
A homogeneous difference is cubic and the four clamped conditions make it zero.
The concentration equation at order gives
so , where fixes the amplitude normalization. At order it gives
The boundary conditions expand to at each endpoint. Integrating this equation from zero to one cancels against . Also and
Thus the required solvability condition is
Since , the clamped-quartic solvability in shallow bioconvection gives
For nonzero long horizontal waves, gives decay and gives growth; the leading neutral threshold is . The leading instability is stationary and independent of and . The exactly uniform horizontal mode has zero growth at this order because total cell number is conserved, so it does not determine the threshold. Upward swimming produces a dense upper layer; the unstable disturbance is its buoyancy-driven overturning, or bioconvection. Higher orders are needed for wavelength selection and finite-depth threshold corrections.
With fixed material parameters and mean concentration, for small , so a sufficiently thin chamber is stable to this branch. Formally its threshold corresponds to when the weak-stratification and distinguished-gyrotaxis assumptions apply. In particular, the assumed is a specified asymptotic analysis; at fixed and decreasing , one instead has . The leading result should not be asserted unchanged in that different ordering without redoing the expansion.
A central force has zero torque, so is constant and the angular momentum is . The areal velocity is . Put and let primes denote angular derivatives. Then , , and . The radial equation with inward force magnitude is , giving the Binet equation
Choose the angular origin along a diameter of a radius- circle through . Its polar equation is , so on . Since , substitution gives and hence
The force is attractive. For fixed force coefficient and mass, , so is inversely proportional to the magnitude of the angular momentum. The time along the circle is
This circular orbit through an inverse-fifth-power singularity reaches the force center at the two endpoints of this angular interval. The integral is finite; continuation through the singular collision is not specified by the force law alone.
Apply the reciprocal identity with flow1 the actual body-force-driven flow and flow2 the rotlet auxiliary field. Its body force is zero. The large-sphere boundary terms vanish under the usual decay and convergence assumptions for this unbounded body-force problem.
On the sphere, the actual rigid velocity is . The auxiliary force is zero and its torque with the outward fluid normal is . The actual torque with that normal is the negative of the hydrodynamic torque on the sphere, hence zero for a torque-free sphere. Consequently the surface side of the reciprocal identity is just . The volume side is
Since the auxiliary couple is arbitrary,
An unknown translation contributes nothing because the auxiliary rotlet has zero net force. This is body-force-driven rotation of a torque-free sphere.
Subtract the ambient velocity and stress, writing . This perturbation decays at infinity and on the sphere has velocity . The ambient flow is regular through the ball and has no body force. Its net torque on the imaginary spherical surface is zero: the divergence theorem converts the torque to the volume integral of the stress divergence plus its antisymmetric part, both zero. Thus the perturbation has zero torque too.
Reciprocity with the auxiliary rotlet gives
Using yields
On this sphere , so the vector divergence theorem gives . Taking the curl of the homogeneous Stokes equation makes harmonic. Its ball average is its central value: the derivative of each spherical mean is proportional to the volume integral of its Laplacian, hence zero, and its small-radius limit is its value at the center. Therefore
This proves Faxén rotation law directly from the reciprocal theorem, including why no finite-radius Laplacian correction is needed for a body-force-free ambient flow. Regularity of the ambient field throughout the sphere's prospective interior is part of this argument.
Use the Unscaled Papkovich–Neuber representation
with harmonic vector and scalar potentials. For a torque-driven sphere choose
Its components are harmonic for , and both and vanish. Hence
The last equality follows from the no-slip boundary condition at . To check that is indeed the applied couple, the traction on the sphere, with directed into the fluid, is . Its hydrodynamic torque is
Here . The applied couple balances this resisting torque. The resulting field is the rotlet of a rotating sphere in Stokes flow.
For the Lorentz reciprocal theorem for Stokes flow, let point out of the fluid domain and take the same viscosity in both flows. With , the theorem is
It follows by taking the divergence of the boundary integrand: incompressibility removes pressure-work terms, the two Newtonian strain contractions are equal, and the remaining stress divergences give the displayed body-force terms. This convention matters: on the inner boundary of an exterior domain, .
Use fixed spatial coordinates in a stationary heterogeneous Earth and define the operator
Here the elastic stiffness tensor has its minor and major symmetries, and the physical body force per unit volume is . The retarded elastodynamic Green tensor is the displacement in direction due to a unit physical force impulse in direction at :
It satisfies the actual Earth's homogeneous boundary conditions, including zero traction on the free surface and continuity of displacement and traction at bonded internal interfaces. Integration through gives , with . No spherical symmetry is required.
For zero initial conditions, form the convolution
Applying to this expression uses the defining Dirac delta function to give . Causality gives zero initial conditions, and each Green column supplies the required boundary conditions. The positive-energy uniqueness argument then identifies this expression with the physical response. The source factor is because is force per unit mass, whereas the Green tensor was normalized to unit force.
A force dipole is a limiting pair of opposite point forces separated by a small vector. Put at and at , and hold fixed as . Expansion of the two Dirac delta functions gives
Its resultant force is zero, and integration by parts gives its radiated displacement as . Thus the source derivative of the elastodynamic Green tensor represents a dipole with force direction and separation direction .
For the surface source choose a normal from the minus side to the plus side and define
The same normal is used in both tractions. If the elastic coefficients are continuous through the surface, the distributional gradient of a piecewise smooth displacement is . Its stress therefore has a singular part . Taking the divergence includes the regular stress jump, so a field satisfying the source-free equations on both sides has equivalent source
In particular, the signs follow from the chosen jump convention, not from an unspecified orientation. The elastodynamic surface-jump representation is consequently
with the Green tensor evaluated at . The first term is a surface distribution of forces, and the second is a surface distribution of dipoles.
One can derive the same formula without multiplying discontinuous material coefficients by a surface delta. Apply integration by parts on the two sides of to the field and the reciprocal Green field . Major symmetry cancels the volume strain terms; the spatial identity is
when the temporal terms are handled by the retarded time convolution. More explicitly, take , extend the zero-initial-data solution causally to , and integrate over all source times. Integration by parts cancels the two temporal terms, with zero endpoint terms; the causal supports subsequently reduce the representation to . The Green impulse contributes on the left. The two outward face normals are and , so their sum on the right is . Moving it to the other side gives . The same identity applied to two force Green fields with interchanged source and receiver proves the reciprocal relation ; hence the displayed surface formula follows. On a bonded material interface the Green displacement and common Green traction are continuous: is then the unambiguous version of the dipole term, evaluated with the matching one-sided coefficients. External free-surface terms vanish because both tractions vanish.
For a fault in isotropic material, the Lamé parameters give
Tangential slip obeys , and ordinary fault traction is continuous across the two faces. Therefore the source is a double-couple fault source with
For a uniform patch of area with and , its integrated seismic moment tensor is
The dipole is a force in the slip direction separated in the normal direction; the dipole is a normal force separated in the slip direction. Their equal and opposite torques cancel. The symmetric trace-free seismic moment tensor has eigenvalues , with zero resultant force and torque. A temporal stress drop on a fault is not a jump of traction between its two simultaneously matching faces; it does not add a single-force layer to this tangential-slip representation.
With no electric force, the Lorentz force equation is
Its scalar product with velocity proves conservation of energy for the particle's kinetic energy:
If with a fixed unit direction , then , so the parallel component of velocity is constant even when the field magnitude varies.
The angular momentum about the origin does not generally remain constant, because
For example, at an instant with , and , its derivative is , nonzero when those factors are nonzero. A force perpendicular to velocity can preserve kinetic energy while exerting a nonzero torque.
For the constant axial field, Cartesian equations are , , and . Use the signed projected areal rate . Then
Thus
The second equation is the magnetic axial angular-momentum invariant, replacing ordinary conservation of . In the symmetric gauge, the added term is the magnetic contribution to canonical angular momentum; it is the axial component that is conserved, not the full mechanical angular-momentum vector.
Let be the constant squared transverse speed. If the motion has a nonzero parallel speed, , where is total kinetic energy. Solving the invariant and using gives
The TeX transcription omits the angular equation, which is present in the PDF and restored here. The PDF's positive radial root describes the outward branch only. An inward branch needs the minus sign, with sign changes at radial turning points; polar coordinates themselves are singular at . These qualifications are needed for a global description of a cyclotron trajectory whose radius about an arbitrary origin can both increase and decrease.
The initial time-dependent-field discussion treats the stipulated magnetic force as a prescribed particle model. If one additionally imposes full Maxwell equations with electric field zero throughout a region, Faraday law requires the magnetic field there to be time independent. The energy calculation is nevertheless valid for the stated force model; it does not assert existence of a Maxwell-consistent time-dependent field with zero electric field everywhere.
Let , and . Differentiating the deformation gives
For the neo-Hookean solid, . The constrained nominal stress tensor is therefore . The multiplier cannot be set arbitrarily to a constant; equilibrium and the traction-free curved surface determine it.
Push the nominal stress to the Cauchy stress tensor: since , . In the current cylindrical orthonormal basis, the left Cauchy-Green deformation tensor has entries
Thus , , and . Static radial equilibrium without body force gives
The current outer radius is . Setting integrates the reaction field:
The other curved-surface traction components vanish because .
On the reference end , the outward reference normal is , and the nominal traction has components . The third row of is . Hence the nominal end traction of a twisted neo-Hookean cylinder is
The current here are evaluated at . These components are per unit reference area, not per unit current area.
For the moment, use current lever arms and reference-area traction. Its axial component is
The axial traction gives no axial moment. This torque also agrees with the reference-energy derivative at fixed axial stretch: the twist-dependent energy per reference length is . It is important that is twist per reference length, not twist per current length.
Write and . The gravitational central force has zero torque, so the specific angular momentum
is constant. For a nonradial orbit , motion lies in the plane normal to , and plane polar coordinates give . With and primes denoting derivatives,
The radial equation is therefore the Binet equation
Its general solution, after choosing the polar origin of angle, is
The origin is a focus of this conic section. To identify which conic section occurs, use the conserved specific energy
A bound, nonradial orbit has , hence and is an ellipse. For example, putting , in gives
an explicit ellipse equation. This is the intended low, bound Kepler orbit. The inverse-square equation alone does not imply an ellipse: an initially tangential speed larger than gives , and a hyperbolic Kepler orbit. Zero angular momentum instead gives radial motion. Those qualifications are necessary for the elliptic conclusion.
In a circular orbit, centripetal acceleration balances the gravitational acceleration:
Here is the positive angular speed; either sense of circulation has this period.
With the stated drag force, use the full angular momentum . Gravitational torque is still zero, while the drag torque is
Therefore for constant . Its direction remains fixed, and its magnitude has exponential decay with time constant ; the orbit remains planar although its shape is no longer a fixed ellipse.
The moment of inertia of a uniform solid cylinder is taken about its symmetry axis. Write its mass density as . A coaxial shell of radius and thickness has mass . Thus
A hollow cylinder would have a different moment of inertia; uniform solid density is the intended assumption.
Let measure the centre's displacement uphill from its initial position, and choose signed angular velocity so that uphill rolling without slipping has . Let be the signed contact force uphill. The translation and rotation equations are
The minus sign in the torque equation follows from the chosen rolling sense: uphill contact force opposes the positive spin. Under rolling without slipping, . Eliminating gives
Using and , the no-slip motion and maximum vertical rise are
Indeed the centre turns at , reaching , whose vertical component is the boxed height. Conservation of energy independently gives the same answer from initial kinetic energy .
The available static friction is at most . It can supply the required uphill force exactly when . Therefore
Interpret the stated friction magnitude as limiting static friction and as kinetic friction during slip, with the same coefficient. Take , . In the slipping regime the contact point moves downhill relative to the slope, so kinetic friction acts uphill. To verify this direction rather than assume it unchecked, solve with . Define . The result is
The centre's speed is , with the sign of specifying ascent or descent. The contact point's relative velocity is
Thus the assumed uphill kinetic friction is consistent throughout both ascent and descent, including when the centre's velocity changes sign. There is no later return to rolling without slipping before reaching the bottom. This is the characteristic slipping solid cylinder on an incline regime.
The centre turns at , giving
The formulas apply up to the positive return time . Substitution into the signed velocity and angular velocity gives
The return spin can have either sign and vanishes at . It reverses when , although the contact point still slips downhill. The unchanged centre speed does not mean that no energy was dissipated: the rotational kinetic energy has decreased. Indeed integrating the frictional power gives
which agrees with the difference of the initial and final rotational kinetic energies.
Use orthonormal cylindrical bases in the reference and deformed configurations. The radial coordinate remains , the angular coordinate becomes , and the axial coordinate is unchanged. Removing the rotation of the cylindrical basis, the deformation gradient is
It is a local simple shear with unit determinant. The squared principal stretches are the eigenvalues of
One principal stretch is one. The remaining squared principal stretches have product one and sum . Consequently they can be written and , where
For negative their ordering reverses, which is immaterial to the strain energy density of an isotropic material.
Let the reference length be . By material isotropy, the total elastic energy and end rotation are
For a quasistatic change, incompressibility makes the constraint reaction do no work. The velocity on an end section is its rigid rotational velocity; its traction power is the resultant torque times the angular velocity. Thus conservation of energy, or equivalently the torque and axial force of a twisted incompressible cylinder work identity, gives and
The radius is fixed in this derivative. This argument computes the required end torque along the prescribed deformation family; proving that a suitable end-only traction distribution sustains that family is unnecessary here.
For a neo-Hookean solid, the identity gives . Therefore
This is the signed torque in the twist direction; its magnitude is . For the positive twist convention the signed value equals the magnitude.
A freely swimming body has neither an imposed end couple nor an imposed end transverse force. Its end bending moment is therefore zero, and the transverse force is also zero at both ends. These are the four free-end bending boundary conditions; they do not require the end displacement or slope to vanish.
Put , using the physically consistent sign. Integrating with the two leading-end conditions gives
The two trailing-end conditions consequently require
These free-end compatibility for a swimming beam conditions are total transverse force and torque balances. They explain why an arbitrary plausible prescribed does not suffice: two integration constants can satisfy only two end conditions unless the forcing already satisfies both compatibility integrals.
The missing freedom is the swimming recoil correction. An observed or prescribed deformation relative to the body must be supplemented by a lateral translation and a small yaw :
To identify with the actual centre of mass displacement, first remove the body-mass-weighted mean from . One may also remove its body-mass-weighted first moment about to define the yaw reference uniquely. This changes the decomposition of the observed motion, not the physical displacement.
For , the recoil contribution to the forcing is
Insert into the two compatibility integrals, using and as weights. This gives two coupled ordinary differential equations for the two recoil motions. Their principal acceleration matrix is
For a nondegenerate positive mass distribution it is a positive-definite matrix: its quadratic form at is unless . Thus initial translation and yaw determine the recoil through these equations, and the corrected supplies the two compatibility conditions. The four free-end conditions determine the bending moment together with two rigid recoil motions; they do not overdetermine a physically complete swimming motion.
Neglecting cell rotational inertia, the light and viscous torque sum to zero. Therefore the angular velocity is . A material orientation evolves by . The vector triple-product identity gives
The last term is the projection of onto the tangent plane to the unit sphere. In particular, , as required to preserve the unit orientation. It aligns the swimmer towards the light; the vorticity rotates that orientation.
For rotational diffusion coefficient , the phototactic orientation Fokker-Planck equation balances deterministic orientation drift with diffusion on the sphere. Its density is normalized with respect to solid angle, not . When , there is no azimuthal drift and the zero-current condition is . Thus , and normalization gives
The limiting density at is .
To justify the angular dependence of the first correction, define the operators
The steady Fokker-Planck equation is . Its regular expansion therefore gives
The coefficients of are independent of , so each azimuthal Fourier harmonic is preserved. The forcing has only the sine harmonic with azimuthal number one. There can be no extra unforced harmonic in a smooth normalized first correction: writing a homogeneous solution as gives . Multiplication by and integration by parts on the sphere gives , hence is constant. Normalization removes that multiple of . It follows that
No explicit calculation of is needed. Its dependence is on and the parameter , and its behavior at the poles must make the density smooth.
In the stated spherical coordinates, . Azimuthal integration makes the leading components and the first-order corrections vanish. The surviving coefficients are
Thus the small-vorticity phototactic orientation response is
Both coefficients depend only on . In particular, is the Langevin function of and is positive for positive light strength; its integral representation above suffices.
The rim-mass wheel has moment of inertia . A uniform solid cylinder has axial moment , so the roller of mass has . No slip gives equal contact speeds, , when denote angular-speed magnitudes. Therefore
With parallel signed axes the two angular velocities have opposite signs. Their kinetic energies add regardless of that convention:
The reflected inertia of a no-slip wheel and roller must be used because accelerating the wheel also accelerates the roller. The transmitted contact forces redistribute energy without dissipating it. For an applied wheel torque , the input power is , so the work-energy theorem gives , or ; this also holds at rest by continuity or the constrained equation of motion.
Assume the driving constants are positive. With the speed-dependent torque,
Separating this linear equation gives
For the fan, its resisting roller torque dissipates power . Expressing this in the wheel coordinate gives a resisting wheel torque . Thus, with ,
The right-hand side is positive at zero, strictly decreasing for nonnegative , and has a unique positive zero; the wheel starting at rest approaches this terminal angular speed. Hence
For a nonzero fan drag this is less than , and as it tends to . The cubed radius ratio is essential: one factor arises from converting roller power to wheel torque, in addition to the two factors in .
Inside the uniform sphere, . Thus, with , part (b) gives
The Gaussian integral needed for the lowered Maxwellian velocity distribution is
Substitution therefore yields
Since throughout the core, the integrand is positive and so is for . Using , part (a)'s massive-test-body drag magnitude is
The slow drift of a circular orbit is determined by torque, not by equating its changing circular speed to the tangential drag. Here , with constant . The specific angular momentum obeys
Hence the positive local decay timescale is
There is a genuine factor-of-two discrepancy with the requested denominator . That denominator would give , which is the timescale for a flat galaxy rotation curve, not this uniform-density core. It also follows from the incorrect replacement , which drops the term in . The literal signed definition is negative for an inward drift; it equals . A positive decay time requires the absolute value or a minus sign.
This is the slow circular inspiral under tangential drag calculation. Its assumptions require small enough for nearly circular adjustment and a meaningful large Coulomb logarithm in stellar dynamics; the leading-log approximation is not uniform at . Also, integrating the truncated distribution all the way to does not give exactly . The model uses as the stated core normalization; exact self-consistency of a sharply truncated uniform core with that distribution is not implied.
The fluid is outside the body, so its normal on the inner boundary is . Let be traction on the body's surface from the fluid. For an exterior point and a flow vanishing at infinity, the boundary representation reads
For , expand the single layer through its first moment and the double layer through its zeroth moment:
The next single-layer and double-layer terms are both at fixed body size and boundary data. Differentiating gives
Hence the dipole terms combine into
The antisymmetric part obeys for . For the symmetric trace-free tensor , . Also . Substitution gives
This derives the Stokes far-field multipoles of a deforming body. is the force exerted by the body on the fluid, the negative of the integrated fluid traction. is its torque on the fluid: . Their kernels are the Stokeslet and rotlet. is the rate of increase of the body's volume, by the Reynolds transport theorem. It gives a radial source flow with volume flux . A volume-preserving body has . The trace-free tensor gives the stresslet, which can remain nonzero for a force-free, torque-free swimmer.
For body-force-free Stokes fields with the same viscosity,
To prove this Lorentz reciprocal theorem, integrate the divergence of the difference of the two cross-work fluxes. Both stress divergences are zero; incompressibility and symmetry of the Newtonian stress reduce each cross-gradient contraction to . These are equal, so the divergence integrates to zero. The argument applies to an exterior domain by first cutting it off and taking the outer radius to infinity; the decaying velocity and stress make the outer boundary contribution vanish.
Define the generalized force as force and torque exerted by the rigid body on the fluid. With a resting far field and no-slip boundary conditions, on the body, and linearity gives
For two such motions the reciprocal theorem becomes
Since the six-component velocities can be chosen independently, . The ordinary work identity gives
for every nonzero rigid-body motion. If the integral were zero, would make the connected exterior flow an infinitesimal rigid motion. Its decay at infinity requires that motion to be zero, which is incompatible with a nonzero no-slip body velocity. Thus is positive definite. Fluid-on-body forces have the opposite sign; their map is , not a positive-definite resistance matrix.
Write and . The helix has , so
Its unit tangent is , where . The given slender-body force density is the force per arc length exerted on the fluid. For pure axial translation, , it gives
For pure rotation, , it gives
The axial torque per unit arc length is . Integrating along the wire gives the axial resistance matrix of a slender helix
Thus translation gives , and rotation gives . These are the requested axial components; the axial swimmer approximation does not require proving statements about the other components. The equality of the two off-diagonal coefficients checks reciprocity, and
For the organism, retain the specified entrainment approximation: the head moves with the local large-scale fluid translation, and its angular velocity differs from the local fluid rotation by . Put . Its torque on the fluid is therefore , and its force is neglected. Neutral buoyancy and absence of external torque give
Solving,
This is the entrained-head approximation for a helical microswimmer, which differs from treating the head as an isolated sphere in otherwise stationary fluid. The flagellum's angular speed is also .
At fixed , the speed is maximal at and tends to zero at either limiting pitch. At fixed other parameters it decreases as : the longer flagellum has more resistance at the fixed torque supplied in this model. Holding the number of turns fixed instead would make change with pitch, so that is a different comparison.
The motor exerts equal and opposite torques of magnitude on flagellum and head, whose relative angular speed is . Therefore its rate of working is
Equivalently, the work delivered to the fluid is . Translation contributes no net work because the total force vanishes. This explains the independence from and , without assigning an isolated-fluid drag law to the entrained head.
Let , and use local distance from the closest pole. The gap is
Horizontal rotation has nonzero wall speed at this pole. In the broad region with , shear is , the area is and the lever arm is . Its torque is therefore . The smallest gap patch has radius and area ; its shear is . It gives the same bounded torque scale.
These are the two estimates requested in the paper. They omit an intermediate annulus, so the printed uniform assertion is not correct as . For , . An annular shear-torque contribution scales as
Integrating between the inner and outer scales produces .
A viscous dissipation lower bound makes this conclusion independent of possible signs of local tractions. A fluid velocity changing by between two no-slip walls dissipates at least per unit area, by the Cauchy-Schwarz inequality in the cross-gap coordinate. The lubrication velocity profile gives more explicitly
with no cross term. The second term is nonnegative. Thus the annulus entails a logarithmic divergence in total power and hence in , since the centre is held fixed and all boundary work is .
The horizontal rotation in a nearly touching spherical shell calculation also gives the corrected force scale. Choose local along and put with its signed value. At leading order the stationary-gap Reynolds lubrication equation is
For it has the particular pressure
which satisfies the equation by direct differentiation. The pressure itself gives no torque about the centre of an exactly spherical inner body, because its normal is radial. It does contribute to tangential shear through the pressure gradient.
For any fixed local outer cutoff, the logarithmically divergent integrals are
The resisting tangential traction is . Integration by parts gives torque magnitude to logarithmic order. Consequently, at leading order in ,
The strict corrected order is ; the paper's scale is the bounded contribution of each of its two nominated regions, not the full asymptotic answer.
For the horizontal force, pressure dominates shear by a factor . Its horizontal projection on the inner sphere has normal component , giving . Hence the required holding-force magnitude is
The broad region and smallest patch each supply ; the intermediate annulus again supplies the extra logarithm. The shear force is smaller by . These expressions assume the completely filled lubrication film of the problem.
The vertical holding force is zero. The geometry is invariant under a half-turn about the vertical axis. That operation reverses the horizontal angular velocity but leaves a vertical force component unchanged. Linearity would reverse that force component too, forcing it to vanish. Equivalently, the induced pressure has the first azimuthal harmonic, whose vertical-force integral over azimuth is zero. The horizontal holding force is the negative of the fluid's horizontal force on the body.