Conditional on , the future Bernoulli random variable is independent of the observed statistical sample and has success probability . Its posterior predictive probability is therefore the posterior mean of . Put and . Then
using the beta-gamma identity and the Gamma function recurrence. Hence
The whole posterior predictive distribution of is the Bernoulli distribution with this success probability.
Let . The Bernoulli distribution likelihood function is . Multiplication by the beta distribution prior density and Bayes' theorem give
Recognizing the normalized beta distribution,
This is Beta-binomial conjugacy; the same update applies whether the data are recorded as the individual Bernoulli trials or their success count.
Under the null hypothesis, the full model has two free positive statistical parameters and the constrained model has one. The Wilks theorem therefore gives
as both sample sizes tend to infinity, with tending to a number strictly between zero and one. For the observed , calculate
The large-sample p-value is the upper-tail probability
where is the cumulative distribution function of the standard normal distribution. The last equality uses the fact that the square of a standard normal random variable has a chi-squared distribution with one statistical degree of freedom. Values of on either side of are already included by the transformation to .
Put , and . Independence gives the likelihood function
The unrestricted maximum-likelihood estimators are and . Under the null hypothesis, the common mean maximizes at . These are maxima because each one-parameter score function has the sign of its observed sum minus its sample size times its proposed mean.
Define the generalized likelihood ratio to be the constrained maximum divided by the unrestricted maximum. The exponential factors cancel, giving
Since and ,
It has maximum one at , when the two fitted means agree, and is small toward either endpoint. A likelihood-ratio test rejects for small , or equivalently large . This is the likelihood-ratio test for equality of exponential means.
Write and , with . Two exact facts about a normal sample are
and independence of the normal sample mean and sample variance holds. A chi-squared distribution with statistical degrees of freedom is a sum of independent variables, each with mean one and variance two. The central limit theorem therefore gives
For , the derivative at is because . The delta method gives the asymptotic normality of a normal sample standard deviation:
The exact independence of and makes their limiting normal distributions independent. Consequently,
Thus
This has the same leading asymptotic variance as . The weights and are those in the optimal asymptotic combination of a normal sample mean and standard deviation. This does not require to be an exactly unbiased estimator of .
Let be the standard normal quantile. Since is a consistent estimator, Slutsky's theorem gives
Its estimated standard error is , giving the approximate Wald confidence interval
For each fixed , this procedure's coverage probability tends to . Intersecting with the positive parameter space preserves coverage of the true positive value.
Put , and . The normal distribution model gives
and, up to a constant independent of , its log-likelihood function is
The score function and its zero equation are
For , this quadratic equation has exactly one positive root, giving the maximum-likelihood estimator
The numerator of the score function is positive between its negative and positive roots and negative above its positive root. Thus the likelihood function increases up to and decreases afterwards: this is its unique global maximum on . Also, at both ends. The all-zero observation vector has probability zero; on that exceptional vector and there is no attained maximum.
The second derivative and the relevant moments are
Therefore the expected Fisher information is
The support of a probability distribution is the whole real line, independent of the positive statistical parameter. The law of large numbers gives and in probability, so the displayed maximum-likelihood estimator is a consistent estimator. The regular asymptotic normality of a maximum likelihood estimator now yields
Thus the requested leading asymptotic variance on the unscaled estimator's scale is . The normal mean proportional to standard deviation model provides a reusable version of this calculation.
For a Bernoulli distribution with fixed , the mean and variance are and . The odds transformation has derivative . Applying the delta method from part (ii),
More precisely, converges to a normal distribution of mean zero and variance , after defining the statistic arbitrarily on . That exceptional event has probability , so this extension does not change the limit. The unextended ratio is undefined there and has no finite exact variance if interpreted as infinite. At it is zero almost surely; at the denominator is always zero. This is the delta method for Bernoulli odds.
For , the central limit theorem gives
If is differentiable at , the delta method applies to the first-order expansion
where the remainder notation means that its product with tends to zero in probability. Hence
The useful nondegenerate normal approximation requires . When , the first-order limit is zero and a higher-order expansion may be needed.
For the independent statistical sample, write the likelihood function and log-likelihood function as
The expected Fisher information in the whole statistical sample is
Under the regularity conditions that permit differentiation under the integral sign, the score function has expected value zero and
For an interior statistical parameter, assuming identifiability and , the regular asymptotic normality of a maximum likelihood estimator states
Thus the large-sample normal approximation is . The inverse information is the leading sampling variance approximation; the displayed convergence specifies its precise asymptotic meaning.
For this homogeneous motion, suppose the matrix is symmetric. Put . The acceleration potential of a homogeneous motion is
where is arbitrary. When taking the spatial gradient, , , , and are fixed. Symmetry gives
This verifies the potential directly and also proves sufficiency of the symmetric matrix condition within the static-family setting. Its dimension is , so the pressure correction has the dimension of stress. Combining with part (b)(ii), the corresponding dynamic Cauchy stress tensor is
where . Substituting its divergence into the Cauchy momentum equation reproduces , as required.
Take two time derivatives at fixed reference position :
The constraint ensures that the deformation gradient is invertible, so . Thus the spatial material acceleration is the affine vector field
Its spatial gradient is , and its curl is
Part (b)(iii) therefore requires
Equivalently, multiplying on the left by and on the right by gives
The translation contributes no spatial curl and is unrestricted by this condition. A useful equivalent first integral is
the antisymmetric matrix in parentheses must be constant, and need not vanish. The separate constraint is still required; differentiating it also gives .
The condition is understood in the setting of part (b), where a static family already exists under the prescribed body force. For a homogeneous elastic deformation gradient, the elastic stress is spatially constant. Static balance of linear momentum consequently gives , ensuring that has a scalar potential. If the static-family assumption were dropped and an arbitrary time-independent body force allowed, the general necessary condition would instead be .
For a twice continuously differentiable scalar potential, mixed second partial derivatives commute. Taking the spatial curl of the equation from part (i) gives
For example, its first component is . The curl acts on the spatial representation of the material acceleration, not directly on its expression in reference coordinates.
This is a necessary local condition. It is sufficient locally, and sufficient globally on a simply connected domain under the usual smoothness assumptions. On a domain with holes, a global scalar potential additionally requires every closed-loop line integral of the material acceleration to vanish. The homogeneous motion in part (c) admits an explicit global scalar potential, so this topological qualification causes no obstruction there.
The pressure adjustment from part (i) can be written
Indeed, since , the difference of the two Cauchy momentum equations is
Thus is constant in space on each connected component. The function is fixed by any prescribed pressure or surface traction datum. In terms of the usual compressive pressure multiplier, . The plus sign in therefore does not identify with the compressive multiplier itself.
Restore the particle label suppressed in the question, writing the static family as . At each fixed , its Cauchy stress tensor satisfies
This dynamic continuation of a static incompressible elastic deformation sets to form a motion. At every time its deformation gradient is the same as that of the corresponding static member. For an elastic material the elastic part of the Cauchy stress tensor depends on that deformation gradient, while incompressibility leaves an arbitrary scalar constraint reaction in hyperelastic stress. Therefore write
Here is the identity matrix. Subtracting static balance of linear momentum from dynamic balance of linear momentum gives
Since the homogeneous incompressible material has constant mass density, define . Necessarily
Conversely, suppose this acceleration potential exists. Choose . Then
The added isotropic stress is symmetric, so angular momentum conservation remains satisfied. This proves both directions for the field equations and the elastic constitutive equation. The surface tractions for the motion are those of the adjusted stress; identical prescribed static tractions would impose an additional boundary restriction on .
For general , put . The reduced strain energy density and its derivative are
The same factorization as in part (i) yields
This form removes the apparent singularity at : its limit is , finite for every fixed . Thus only the upper endpoint can obstruct convergence of the improper integral.
As , , giving
For , the comparison test with a power integral implies convergence exactly when . Therefore
is precisely the range with finite critical pressure, the cavitation criterion for power-law strain energy. At the divergence is logarithmic; for larger it is a power divergence. These materials require an unbounded tensile loading magnitude in this ideal model. The qualification excludes the degenerate zero-energy material.
The neo-Hookean solid corresponds to , with positive shear modulus . Substitution of the principal stretches gives
The identity simplifies the integrand:
The two improper integrals are elementary:
Thus the critical tensile stress magnitude is . As a check on the finite-sphere limit, part (c) gives
which tends to as the cavity radius tends to zero.
Take the inner surface to be free of traction, as appropriate to an empty cavity with no surface tension. At the outer surface the imposed pressure is compressive when positive. The outward normal vectors are at and at , giving
Integrating the ordinary differential equation from part (ii) between the two surfaces gives
The outer stretch follows from incompressibility:
Hence an expression entirely in terms of the inner stretch and the reference radii is
Equivalently . For an expanding shell, ; when on this range, , correctly describing an outward tensile loading. If an inner pressure were present, the same derivation would give on the left. Thus the empty-cavity condition specifies the pressure reference needed for the requested answer.
Let denote derivatives of the strain energy density with respect to its three principal stretches. The principal stress formula for incompressible hyperelasticity is
It follows by applying in principal axes. Equal tangential principal stretches and material isotropy give at . Differentiating the reduced strain energy density by the chain rule gives
The unknown pressure cancels in this difference. Substituting in part (i), and then using the supplied derivative of , gives
Consequently the desired ordinary differential equation is
For completeness, the supplied derivative follows from : , and differentiating gives . At the undeformed value the division must be interpreted by a limit; the spherically symmetric deformation with has and should be handled directly by the radial equilibrium equation.
The Cauchy momentum equation in static elastic equilibrium, with zero body force, is . The Cauchy stress tensor is symmetric. Material isotropy and the equal tangential principal stretches imply , so its radial equation is
All stresses and spatial derivatives in this equation are measured in the current configuration.

There are unlisted articles, also show them or only show them.