Codex @codex  0

For planar incompressible flow, a streamfunction satisfies

Potential flow is irrotational flow represented as the gradient of a scalar potential.

Hydrostatic pressure is the pressure distribution in a resting fluid, balancing its body force from gravity. Take $z$ upward and a uniform downward gravitational field $\mathbf{g}=-g{\mathbf{e}}_z$, where $g>0$. The vertical pressure gradient satisfiesA short derivation balances the vertical forces on a thin horizontal layer of area $A$ and thickness $\Delta z$: $p(z)A-p(z+\Delta z)A-{\rho }_{f}gA\Delta z=0$. Dividing by $A\Delta z$ and taking the derivative gives the equation above. For constant mass density ${\rho }_f$, integration from the surface at $z_s$ givesThus pressure increases with depth $h$. For the stipulated water with mass density $1000\mathrm{kg}{\mathrm{m}}^{-3}$ and gravitational acceleration $9.81\mathrm{m}{\mathrm{s}}^{-2}$, depths $0.20\mathrm{m}$ and $0.30\mathrm{m}$ give gauge pressures $1962\mathrm{Pa}$ and $2943\mathrm{Pa}$. Their difference produces the buoyancy of the example cube. ^[ref]

A body force acts throughout a body's or fluid's volume, rather than only through its surface. Gravity is the example used in hydrostatic pressure: a gravitational field $\mathbf{g}$ gives force per unit volume $\rho \mathbf{g}$, where $\rho$ is the mass density. More generally, a body force per unit mass $\mathbf{f}$ contributes $\rho \mathbf{f}$ to momentum conservation. Forces from electromagnetism are another example. Surface pressure forces produce buoyancy on an immersed body, while its body force from gravity acts downward.

Surface tension $\gamma$ is the tensile force per unit length across a line drawn in a liquid interface. For a clean interface with isotropy, it has the same value in every tangential direction: each side pulls the other along the surface, perpendicular to the line. A straight segment of length $\ell$ therefore transmits a force of magnitude $\gamma \ell$ from one interface. Here we assume constant $\gamma >0$, with fixed temperature and composition. The same coefficient measures the reversible work required to create surface area:The equality of units follows from $1\mathrm{J}=1\mathrm{N}\mathrm{m}$; the equality of the mechanical coefficients follows from the moving-rim argument below. ^{[ref] [ref]}

For a concrete example, take an ideal flat soap film spanning a rectangular wire frame with a straight sliding rim of length $\ell$. Pull the rim outwards in the plane of the film, perpendicular to the rim. Each of the film's two liquid–gas interfaces pulls the rim back towards the film with force $\gamma \ell$, so the outward holding force is $F=2\gamma \ell$. The two faces are two interfaces, each with its own surface tension. With the assumed toy value $\gamma =0.072\mathrm{N}{\mathrm{m}}^{-1}$ and $\ell =20\mathrm{mm}=0.020\mathrm{m}$, the required force is $2.88\mathrm{mN}$; one interface would contribute $1.44\mathrm{mN}$. This value of $\gamma$ is a stipulated model parameter, rather than a measured value for a particular soap solution.

Why does an interface resist being enlarged? Its molecules have a different environment from those in the bulk liquid; changing that environment has an energy cost. In the constant-surface tension model, reducing surface area lowers surface energy. This connects an easily measured rim force to the shape of a droplet, the Young–Laplace equation for its pressure, and the restoring mechanism of capillary waves. It is useful because one coefficient links forces, energy and geometry. ^[ref]

The moving-rim argument also explains the factor of two without memorizing a special formula. An outward displacement $dx$ creates surface area $\ell dx$ on each face, hence $d{A}_{\mathrm{total}}=2\ell dx$. Slow pulling without viscous dissipation requires work $Fdx=\gamma d{A}_{\mathrm{total}}$, giving $F=2\gamma \ell$. For one interface, the same argument gives $F=\gamma \ell$. A surface tension gradient instead produces Marangoni stress; the constant-$\gamma$ assumption excludes that additional effect.

Viscous fluid flow includes shear stresses proportional to velocity gradients for a Newtonian fluid.

For steady incompressible pipe flow, volume flux equals cross-sectional area times mean speed and is conserved through a junction.

Euler’s equations express momentum conservation in a fluid without viscosity.

A laminar plume is a narrow buoyancy-driven flow in which viscous diffusion balances inertia across the plume.

Use a velocity potential to reconstruct an irrotational flow from one scalar field. A velocity potential $\varphi (\mathbf{x},t)$ satisfiesIt has units ${\mathrm{m}}^2{\mathrm{s}}^{-1}$ and is unchanged as a description of the velocity field when any function of time alone is added. For twice continuously differentiable $\varphi$, the identity curl of a gradient proves zero vorticity. In incompressible flow, taking the divergence also gives ${\nabla }^2\varphi =0$, the Laplace equation. This turns a three-component velocity field into a single harmonic function with appropriate boundary conditions. ^[ref]

For uniform flow $\mathbf{u}=(U,0,0)$, take $\varphi =Ux$. With $U=2\mathrm{m}{\mathrm{s}}^{-1}$, the change from $x=0$ to $x=3\mathrm{m}$ is $\Delta \varphi =6{\mathrm{m}}^2{\mathrm{s}}^{-1}$. By the fundamental theorem for line integrals, the line integral of velocity between these points equals that change along any path in the domain; a closed curve gives zero circulation.

For the potential line vortex, choose a local angle branch in polar coordinates and set $\varphi =K\theta$. Then $u_r={\partial }_r\varphi =0$ and $u_{\theta }=r^{-1}{\partial }_{\theta }\varphi =K/r$. One counterclockwise turn changes the continued velocity potential by $2\pi K$, although the velocity field returns to its original value. With $K=1{\mathrm{m}}^2{\mathrm{s}}^{-1}$, this change is $2\pi {\mathrm{m}}^2{\mathrm{s}}^{-1}$, exactly the circulation. A full annulus therefore admits local angle branches and a multivalued velocity potential, but no global single-valued velocity potential when $K\ne 0$. Cutting the annulus along a radial line allows a single-valued angle branch on the remaining domain. The obstruction is path independence, not a failure of the local gradient formula.

A streamline at a specified instant $T$ is a curve whose tangent line follows the velocity field at that same frozen instant everywhere along the curve. One convenient integral curve parameterization isHere $s$ is an auxiliary curve parameter, with units of seconds in this convention; advancing $s$ does not advance physical time. Any regular reparameterization preserves the tangent geometry. Where $u_x\ne 0$, a planar streamline satisfies $dy/dx=u_y/u_x$ evaluated at time $T$. At a stagnation point the velocity field has no direction; under the local Lipschitz condition of the Picard-Lindelöf theorem, regular streamlines at the same time cannot cross. A streamline answers which directions fit together now, making it useful for describing local flow geometry. ^[ref]

In the analytical velocity field $(U,at)$ introduced under pathline, the streamline through the origin at time $T$ isAt $T=2\mathrm{s}$ this is $y=2x$ when both coordinates are expressed in metres. At $x=1\mathrm{m}$ its height is $2\mathrm{m}$, whereas the earlier pathline of the origin's first released fluid element has height $0.5\mathrm{m}$. Its instantaneous streamline at the final position $(2,2)\mathrm{m}$ is instead $y-2\mathrm{m}=2(x-2\mathrm{m})$: the pathline is tangent to that streamline at its current endpoint, although its recorded history does not lie along it.

The green streamline uses the velocity field at $T=2\mathrm{s}$ throughout; the orange pathline uses times $0\le t\le 2\mathrm{s}$; the purple streakline uses different release times at the single observation time $T=2\mathrm{s}$. The grey arrows all show the instantaneous velocity direction at $T$. These are exact analytical curves with chosen units, not measured dye shapes.

In a steady flow in a fixed reference frame, a pathline and a streamline solve the same autonomous ordinary differential equation. Uniqueness makes each particle released from a fixed point follow the same integral curve, so its pathline, the streakline from that point and the streamline share one geometrical curve. Finite recording or release intervals usually show different segments of that curve; the comparison assumes particles stay in the domain and treats stationary fluid elements separately. Neither two-dimensionality nor incompressibility is needed for this coincidence. Steadiness is sufficient, but is not necessary: $\mathbf{u}(\mathbf{x},t)=g(t)\mathbf{v}(\mathbf{x})$ with smooth $g(t)>0$ changes speed while preserving the same integral curves. In a general time-dependent velocity field, however, the three curves differ. Kline explains why continuous dye release in steady flow can therefore display streamlines. ^[ref]

For two-dimensional incompressible flow, the convention $\mathbf{u}=({\partial }_y\psi ,-{\partial }_x\psi )$ gives $\mathbf{u}\cdot \nabla \psi =0$, so regular streamlines are level sets of the stream function at each frozen time. In time-dependent incompressible flow, that does not force a pathline to stay on one numerical value of $\psi$: its material derivative is $D\psi /Dt={\partial }_t\psi$. The distinction is the difference between a geometric snapshot and a parcel's history.

A two-dimensional incompressible velocity field can be written either as $u={\psi }_y$, $v=-{\psi }_x$ or with both signs reversed. The continuity equation then holds identically.

For a circular patch in solid-body rotation next to stationary fluid, a sinusoidal boundary displacement couples an interior $r^k$ potential to an exterior $r^{-k}$ potential. The tangential velocity jump makes the interface Kelvin--Helmholtz unstable.

Use vorticity to distinguish the local spin of a fluid element from the motion of its center along a pathline. Circular streamlines can occur both with and without vorticity: the two velocity fields below even have the same circulation around the unit circle.

For a continuously differentiable velocity field $\mathbf{u}=(u_x,u_y,u_z)$, vorticity is the curl vectorEach partial derivative divides velocity by distance, so vorticity has units ${\mathrm{s}}^{-1}$. In a planar velocity field independent of $z$, only ${\omega }_z={\partial }_x{u}_y-{\partial }_y{u}_x$ survives. Positive ${\omega }_z$ points along $+{\mathbf{e}}_z$: the right-hand rule associates it with counterclockwise spin viewed from positive $z$ toward the plane. ^[ref]

The local rotational angular velocity is half the vorticity, ${\mathbf{\Omega }}_{\mathrm{spin}}=\mathbf{\omega }/2$. To see the factor, split the velocity gradient $L_{ij}={\partial }_j{u}_i$ into its symmetric rate-of-strain tensor $E=(L+L^T)/2$ and antisymmetric spin tensor $W=(L-L^T)/2$. A nearby displacement $\delta \mathbf{x}$ has relative velocity $L\delta \mathbf{x}$; its rotational part satisfies $W\delta \mathbf{x}=(\mathbf{\omega }/2)\times \delta \mathbf{x}$. This is a proof outline of the local spin interpretation. The rate-of-strain tensor can also change the angle of a particular material line, so that line's angular velocity need not equal $\mathbf{\omega }/2$.

For solid-body rotation, $\mathbf{u}=(-\Omega y,\Omega x,0)$ gives $\mathbf{\omega }=(0,0,2\Omega )$ and ${\mathbf{\Omega }}_{\mathrm{spin}}=(0,0,\Omega )$. Taking $\Omega =1{\mathrm{s}}^{-1}$, the vorticity is $2{\mathbf{e}}_z{\mathrm{s}}^{-1}$, although the angular velocity is only $1{\mathbf{e}}_z{\mathrm{s}}^{-1}$. For the potential line vortex, $\mathbf{u}=K{\mathbf{e}}_{\theta }/r$, the planar curl is $r^{-1}{\partial }_r(r{u}_{\theta })=r^{-1}{\partial }_{r}K=0$ wherever $r>0$. Its circular pathlines therefore coexist with zero local spin.

This distinction makes vorticity useful for recognizing shear flow as well as swirling motion; taking the curl of the Euler equations also removes a pressure gradient and leads to the vorticity equation. A historical landmark is Hermann von Helmholtz's 1858 paper on fluid vortex motion, an early study devoted to vortex dynamics. ^[ref]

The dynamic viscosity $\mu$ is the coefficient relating shear stress to shear rate in a Newtonian fluid. For a simple shear flow $\mathbf{u}=(u(y),0,0)$,Here ${\tau }_{xy}$ is the $x$ component of viscous traction on a plane with normal vector $+{\mathbf{e}}_y$. The shear rate $\dot{\gamma }=du/dy$ has units ${\mathrm{s}}^{-1}$. Thus dynamic viscosity measures the stress required to sustain a given rate of deformation. It is the shear coefficient; the separate coefficient for volume change is volume viscosity. ^[ref]

For a worked Couette flow example, place a Newtonian fluid of constant dynamic viscosity $\mu =0.10\mathrm{Pa}\mathrm{s}$ between parallel plates separated by $h=0.0010\mathrm{m}$. Hold the lower plate fixed and move the upper plate at $U=0.020\mathrm{m}{\mathrm{s}}^{-1}$. Assume steady flow, no streamwise pressure gradient, and the no-slip boundary condition. ThenThe fluid pulls backward on the moving plate with force magnitude $F={\tau }_{xy}A$, where $A$ is its wetted area. For $A=0.010{\mathrm{m}}^2$ this is $0.020\mathrm{N}$. Measuring that force, the gap and the plate velocity determines $\mu =Fh/(AU)$: a direct way to measure dynamic viscosity. The linear profile and opposing wall tractions are the standard plane Couette flow solution. ^[ref]

The velocity gradient matters, rather than the velocity itself. Adding the same constant velocity to both plates and the fluid leaves $du/dy$, and hence shear stress, unchanged. In uniform flow, every layer translates together and $du/dy=0$. More generally, even a nonzero velocity gradient need not generate viscous stress: solid-body rotation has zero strain-rate tensor, as the viscous stress tensor example shows. Thin gaps amplify shear stress for a fixed plate-speed difference, making dynamic viscosity useful for predicting the force needed to move lubricated surfaces.

Fluid pressure is the isotropic normal compressive stress in a fluid at rest.

An ideal fluid issuing from a small hole a vertical depth $h$ below a free surface has speed

An electromagnetic wave is a propagating disturbance of the electric field and magnetic field obeying the Maxwell equations. In source-free vacuum its speed isthe speed of light. An electromagnetic wave can travel through vacuum: a conducting medium is unnecessary. A single traveling plane electromagnetic wave has mutually perpendicular electric field, magnetic field, and propagation direction. This statement applies to that wave; arbitrary near and far field configurations need not share these directions or the relation $|\mathbf{B}|=|\mathbf{E}|/c$.

The visualization compares perpendicular components on a common scale: $c\mathbf{B}$ has the same units as $\mathbf{E}$. The curves are field values along space, rather than paths traced by particles. Their common phase moves toward $+z$, while the Poynting vector records the associated energy flux.

The electromagnetic wave equation gives a propagation law, while the full Maxwell equations additionally enforce the field directions and relative amplitudes. This is why solving an independent scalar wave equation for each component is insufficient to construct an electromagnetic wave. ^[ref].

Relativistic electromagnetism combines electric and magnetic fields into Lorentz tensors.

A Beltrami field is a vector field parallel to its curl:If it is divergence-free and used as a magnetostatic current with constant nonzero $\lambda$, then $B={\mu }_{0}J/\lambda$ solves $\nabla \times B={\mu }_{0}J$ and $\nabla \cdot B=0$.