Section compression 2026-11-05
Section compression is shortening of a cut section relative to the corresponding specimen-block dimension, usually measured parallel to the cutting direction in ultramicrotomy. It is a physical deformation introduced during preparation, so an accurately calibrated microscope can still measure a distorted specimen. Manufacturer guidance for polymer sectioning connects reduced compression with smaller knife wedge angles, while noting the resulting greater sensitivity of the cutting edge.[ref]
Let be a reference length in the block and its recovered section length along the same direction. Define a positive compression fraction
The corresponding engineering strain is . State this sign convention: a reported positive percentage compression and a negative longitudinal strain can describe the same shortening.
For an original geometrical model, a feature recovered as has . If transverse dimensions are unchanged and the shortening is uniform, an originally circular feature becomes an ellipse with axis ratio . Its area becomes of the original, not : only one direction was shortened. Under the additional assumption of volume conservation, a nominal layer would have thickness
Neither transverse constancy nor volume conservation is automatic. Material loss, cracking, relaxation and nonuniform deformation can invalidate the model; section length alone cannot establish recovered thickness.
A useful materials check compares recognizable features in the block face and collected section, recording cutting direction, knife wedge angle, knife clearance angle and specimen conditions. Repeating the comparison at several positions tests whether one compression fraction is adequate. Under the simple model above, expanding the shortened coordinate by would reverse the geometrical shortening, but this is a model-based correction rather than an extra observation. Image registration can align features without proving that it has recovered their original shapes.
Semilatus rectum Created 2026-10-07 Updated 2026-10-25
The distance from a focus to a conic section along a line perpendicular to its symmetry axis. In focus-centred polar coordinates, an ellipse may be written , where is its eccentricity of a conic.
The distance from a focus of a conic section to the curve measured perpendicular to its principal axis. In the focus-based polar coordinates equation it is the length , where is the eccentricity. For an ellipse, . For a Newtonian Kepler orbit, with the specific angular momentum.
Semi-major and semi-minor axes Created 2026-10-14 Updated 2026-10-20
The semi-major and semi-minor axes are the larger and smaller half-axis lengths of an ellipse. In principal-axis coordinates the ellipse has equation with . The same terminology is used for a hyperbola , where is half its transverse axis and half its conjugate axis. Orbital semiaxes apply these geometric quantities to conic sections.
Signed swept area 2026-10-14
Signed swept area counts the area traversed by a position vector, positively or negatively according to its direction of turning. For a continuously differentiable planar trajectory, its accumulated value relative to is the line integral
A short segment contributes the oriented triangle area ; taking its time derivative gives areal velocity. Repeated turns count repeated area; a reversal subtracts it. Thus this quantity need not equal the area of the union of all previously swept regions. The origin matters: the relevant origin for Kepler's second law is the attracting focus of the ellipse, rather than its geometric centre.
Simple harmonic motion Created 2026-09-24 Updated 2026-10-14
Simple harmonic motion is motion in which the acceleration is proportional to the displacement from equilibrium and points back towards it:
Here is measured from equilibrium, and is the constant angular frequency. For a point mass attached to an ideal spring, Hooke's law gives the restoring force , with stiffness , and Newton's second law yields . The minus sign matters: for the force is negative, and for it is positive. A restoring force need not oppose velocity; on the return towards equilibrium it increases speed.
The general solution is
The amplitude and oscillation phase encode the initial conditions. We use for the oscillation period to distinguish it from kinetic energy . For , the oscillation period is independent of amplitude, the property of isochronous harmonic motion. At the body remains at equilibrium. [ref]
Choose , , and release the mass from rest at displacement . Then , , and . Writing time in seconds,
At the velocity vanishes, but the acceleration is : a turning point is not a state of rest that persists. At , the body crosses equilibrium with velocity and zero acceleration. At it reaches the opposite turning point, .
Taking potential energy zero at equilibrium, the same solution gives
At each turning point all mechanical energy is potential energy; at each equilibrium crossing it is kinetic energy. Both repeat twice during one complete position cycle because squaring removes the sign. At , for example, each contributes .
Figure 1.
Position, velocity, phase ellipse and energy exchange for a mass of 0.5 kg on a spring of stiffness 2 N/m
. Details.
The physical position trace covers a line segment, in metres. In the phase plane, the paired position and velocity instead trace the ellipse
This is precisely , rewritten: the single conserved mechanical energy fixes the amplitude and the whole ellipse. It does not fix the starting oscillation phase. At both and lie on it; position alone cannot distinguish them. Replacing by momentum gives the equivalent phase-space trajectory. The arrows show increasing time, clockwise in coordinates.
This closed ellipse assumes a time-independent spring and no damping or applied drive. Adding a resisting force , , gives and . An underdamped damped harmonic oscillator spirals inward in the phase plane, crossing successively smaller energy contours. The ideal harmonic oscillator is also useful beyond springs: near a smooth potential energy minimum with , its Taylor expansion begins with . For sufficiently small displacements, this gives the same restoring force to leading order, explaining why small oscillations share one solvable pattern.
Singular value decomposition Created 2026-09-24 Updated 2026-10-14
The singular value decomposition separates any matrix into input directions, stretching factors, and output directions. Every complex matrix admits
Here are unitary matrices, is the conjugate transpose, and is a rectangular diagonal matrix. Its diagonal entries are the singular values, ordered . We use the conventional letters: contains the right singular vectors , while contains the left singular vectors . Writing instead merely swaps these two matrix names; it requires swapping their roles consistently. For real matrices, choose orthogonal matrices and replace the conjugate transpose with the transpose.[ref]
Reading from right to left, expresses the input in an orthonormal basis, stretches or annihilates those coordinates, and assembles the output in another orthonormal basis. Unlike matrix similarity, the input and output bases can differ, and even have different sizes. A matrix has full factors of sizes , , and . If its matrix rank is , one can retain only the active columns, giving sizes , , and for ; the full additionally describes an unused output direction.
For a fully computed nonsymmetric example, take
Multiplication gives . The right singular vectors are and ; their images are and . Thus, parametrizing the unit circle by gives . Its image is the ellipse . The two singular values are its semiaxis lengths, and the left singular vectors point along its axes. The singular value decomposition finds precisely the perpendicular input directions whose images stay perpendicular.
Figure 1.
The unit circle becomes an ellipse: and
. Details.
For compression, write the matrix as a sum of outer products and retain the largest terms:
where is the matrix rank. Among all matrices of matrix rank at most , minimizes the Frobenius norm error; this is the Eckart-Young-Mirsky theorem. The operator norm error is for . These statements concern specified norms, rather than guaranteeing that discarded details are visually or scientifically unimportant.[ref]
Consider an brightness matrix , with
and , . The broad bright patch and alternating checkerboard have orthogonal row and column directions: . Their singular values are and . This low-rank approximation keeps the first outer product, giving , with Frobenius norm error and relative error . For example, becomes , and becomes : every entry changes by in magnitude. The discarded pattern is small but entirely lost.
Figure 2.
An matrix, its rank-one approximation, and the discarded checkerboard
. Details.
For this illustrative image compression, storing one normalized left singular vector, one normalized right singular vector, and one singular value requires scalars instead of . This counts scalars at equal precision, before storage overhead. In general, scalars beat only for sufficiently small , and small error requires a small discarded sum of squared singular values. The usefulness comes from measuring the tradeoff before throwing information away.[ref]
In the circular-Earth-orbit, unpowered patched conic approximation, the least Earth-relative excess speed for direct solar-surface contact lowers the heliocentric tangential speed to that of an ellipse with apocentre and pericentre . The vis-viva equation gives , so the retrograde excess magnitude is and the terrestrial surface launch speed is the title expression. Cancelling all heliocentric angular momentum instead produces radial fall to a point Sun and the larger estimate . Rotation, planetary gravity assists and atmospheric drag are outside this direct-flight model.
Specific orbital energy Created 2026-09-24 Updated 2026-11-05
The specific orbital energy is the relative mechanical energy per unit reduced mass in the Newtonian two-body problem. For total mass , gravitational parameter , separation and relative speed , it is
The gravitational potential is taken to vanish at infinite separation. The last equality uses a signed semi-major axis : positive for a bound ellipse and negative for a hyperbolic Kepler orbit. A parabolic Kepler orbit has and no finite semi-major axis. For nonradial attractive Kepler orbits, these signs distinguish the three orbit classes.[ref]
For a circular orbit, gives . For an escaping hyperbolic Kepler orbit, taking gives the hyperbolic excess speed . Multiplication by the reduced mass gives the two-body orbital energy; dividing by a different mass would mix conventions. The units of specific orbital energy are .
Spheroid 2026-10-14
A spheroid is an ellipsoid of revolution obtained by rotating an ellipse about a principal axis. Rotation about the shorter axis gives an oblate spheroid; rotation about the longer axis gives a prolate spheroid. Thus the oblate form is a member of the general family.
Steiner inellipse Created 2026-10-20 Updated 2026-10-25
The Steiner inellipse of a nondegenerate triangle is the unique ellipse of largest area contained in the triangle. Its center is the centroid, and it touches each side at its midpoint.
For , the Joukowski map maps the exterior unit circle to an ellipse of horizontal and vertical semiaxes and . The Milne-Thomson circle theorem gives for a uniform flow inclined by . The chain rule produces the displayed complex velocity in the physical plane. Since , the far-field flow retains its speed and direction. Its two stagnation points are
obtained from . The map derivative is nonzero on and outside the unit circle, so these zeros are preserved without introducing a boundary singularity.
The University of New South Wales documents an undriven, visitor-started Foucault pendulum. A fixed vertical wire and wall line define its initial north–south swing plane. The documented comparison one hour later shows reduced amplitude and about nine degrees of anticlockwise precession. The apparatus swings for several hours without an electromagnetic drive.[ref]
Figure 1.
Functional Foucault pendulum apparatus, fixed sighting reference, and predicted latitude dependence; schematic with no historical dimensions
. Details.
To turn that demonstration into a quantitative experiment, the following is a proposed measurement protocol. Establish a rigid support with no preferred horizontal swing direction, measure the wire length to the bob's centre, and mark two perpendicular horizontal axes fixed to the building. Start with a small displacement along the sighting plane, then release with as little transverse velocity as possible. Record the actual launch method; burning a fine restraining thread is one possible proposed release, not a claim about the documented UNSW launch. Keep people clear of the bob and avoid touching the suspension during the observation.
Record the horizontal position from above with a stationary, calibrated camera, or sight the bob against the wire and wall line at recorded times. Fit the long axis of each short group of swings to estimate its orientation ; use the extrema on both sides rather than following the bob's rapidly reversing velocity. A swing line has orientation modulo , so unwrap successive small direction changes continuously. Rotate no camera or reference between measurements. Record the fast oscillation period separately, and compare the slope of with the Latitude law of Foucault precession. Repeat launches along different directions and monitor ellipses, pivot motion, and air currents before attributing the slow change to Earth's rotation.
Virial theorem on a Kepler ellipse Created 2026-10-14 Updated 2026-10-20
Consider the exact two-body problem with masses . In the inertial centre of mass frame, its internal kinetic energy is , where is their relative position, is the reduced mass, and with . Take a noncollision elliptic Kepler orbit with semi-major axis and orbital eccentricity . Write for eccentric anomaly, to avoid confusing it with total energy . With mean motion and orbital period , Kepler's equation and the orbit geometry give
The time origin is periapsis. Since , the time average of over one orbital period is exactly . Therefore and , independently of orbital eccentricity. Equal steps in eccentric anomaly are not equal time steps; unweighted averaging of a drawing of the ellipse gives the wrong answer.
Figure 1.
Instantaneous kinetic energy and potential energy, their orbital period averages, and the finite-window virial residual on an eccentric Kepler orbit
. Details.
The original dimensionless example in both diagrams has and . At periapsis, , , ; at apoapsis, , , . Both have , but is respectively and . Only the orbital period averages are and . The instantaneous zero of occurs at , not at every point of the orbit.
Figure 2.
Relative orbit of the same two-body problem, with equal-time markers, the attracting focus, and periapsis and apoapsis energies
. Details.
The endpoint term can also be evaluated exactly: . Starting at periapsis, a window ending at eccentric anomaly has
At , Kepler's equation gives and a positive residual . At or , returns to zero and the residual vanishes exactly. The lower panel shows the running residual and its endpoint expression coinciding; the shaded quarter-orbital period window explains why a short observation need not satisfy the infinite-time theorem.
Virtual basal ring 2026-11-05
The virtual basal ring is the geometric reference formed from the lowest attachment points of the three aortic valve leaflets. It specifies a basal plane of the aortic root; it is not the entire crown-shaped tissue attachment represented by the anatomical aortic annulus.[ref]
Three noncollinear landmarks determine a plane. For landmark position vectors , a normal is
The reference plane then obeys . Near-collinear landmarks make small, illustrating geometrically why landmark identification affects orientation. These equations construct a reference, not a ring of newly discovered tissue.
A plane alone also supplies no unique anatomical outline. Three points can define a circumcircle, but choosing that circle is a modeling convention; the actual lumen outline in that plane can be noncircular. For an original ellipse with semiaxes 15 and 10 mm, the enclosed area is mm and the equal-area circular diameter is mm. Neither the 30 mm major diameter nor the 20 mm minor diameter equals that number.
The virtual basal ring is useful because it gives different images a specified basal reference. A measurement must still identify its landmarks, outline, cardiac cycle phase and diameter or area convention. It should not silently substitute the sinotubular junction or the longer three-dimensional leaflet attachment path for this basal reference.
Weighted Euclidean inner product Created 2026-10-14 Updated 2026-10-18
A symmetric positive-definite matrix defines an inner product on real coordinate vectors by
For diagonal , positive diagonal entries weight the squared coordinate errors. This is the finite-coordinate version of a weighted inner product; the positive-definite matrix example appears in Francis Narcowich, Inner Products and Norms, standard inner products, example 8.
For , the squared norm of is . A first-coordinate error of one costs as much as a second-coordinate error of two. The unit sphere is the ellipse , and orthogonality means . Thus “closest” and “perpendicular” depend on the chosen inner product. The orthogonal projection residual example shows how this changes a best approximation.