Symmetry-axis equation of a heavy symmetric top Created 2026-10-20 Updated 2026-10-31
Writing the unit symmetry axis as and axial spin momentum as , angular momentum is . Taking its derivative and applying gravitational torque gives .
Third-class lever Created 2026-10-31 Updated 2026-11-05
A third-class lever places the applied effort between the fulcrum and the load. For perpendicular loads on a straight ideal lever, the effort lever arm is shorter than the load arm . Static torque balance gives , so its mechanical advantage is less than one.
The arrangement trades a larger required force for a larger load-end travel and speed. Tweezers provide a familiar model: the fingers press between the joined end and the gripping tips. For a small rotation, tip displacement is proportional to its distance from the pivot, so the displacement ratio is inverse to the force ratio. An ideal lever therefore conserves work while changing the force and motion scales.
Tidal deformation 2026-10-14
Tidal deformation is the change in a body's shape caused by differential gravity across it, that is, by a tidal force. The familiar two-bulge picture represents an elongated response along the companion direction, rather than a separate force pulling only the nearest surface. If spin and orbital motion differ, the forcing sweeps through the body's material. With tidal dissipation, the response is out of alignment with the instantaneous forcing, allowing a net torque. [ref].
Tipping of a rigid body 2026-11-05
Tipping of a rigid body begins when a supported configuration can no longer balance its applied forces and torques with admissible contact forces, and rotation about a support edge becomes possible. For gravity alone on a horizontal surface, the center of mass projection must lie in the support polygon. A boundary projection marks incipient unloading of contacts; it is not a general guarantee about subsequent dynamics. The unilateral-contact and force/torque conditions are explicit in the primary robotics treatment.[ref]
A planar horizontal pull gives a useful distinction between tipping and sliding. Let the gravitational weight be , the inward distance of the center of mass projection from the candidate tipping edge be , and the pull's application height be . Taking torque about that edge gives the limiting balance
The contact forces elsewhere on the base then unload. With coefficient of static friction , the horizontal sliding limit in this same model is . Tipping can occur first only if ; the geometric support polygon by itself does not decide this competition.
For an original example, choose , , , and . The tipping threshold is . With , sliding would require , so tipping is the first predicted loss of this planar static configuration. With , sliding starts at instead. Equal thresholds require a coupled contact analysis rather than a strict choice between the two labels.
A bench comparison can use a rigid box, a horizontal force gauge at a known height, and a slow force increase while observing the first loss of full-base contact or translation. Include the box's actual combined center of mass, not just its visible geometric centre. The static tipping margin measures the gravity-only geometric reserve; a pull, anchoring, changing contact set, or nonhorizontal ground changes the governing balance problem. The full friction constraints must then be retained.[ref]
Torque Created 2026-09-24 Updated 2026-10-14
Torque measures a force's turning effect about a specified origin. The geometry in the angular momentum diagram applies with force replacing momentum: transverse forces give positive or negative torque, while a radial force gives zero. A longer perpendicular lever arm makes the same force more effective, explaining why pushing near the end of a handle is useful.
For a force applied at position from a fixed origin in an inertial frame, its torque, or moment of force, is
Here , is the angle between position and force, and is the perpendicular lever arm. Direction follows the right-hand rule; in the plane , positive counterclockwise as viewed from . The International System of Units unit is . Although torque and energy have the same physical dimensions, torque is an axial vector and energy is a scalar; their roles differ.
For and , . Applying the same force at gives ; reversing it gives a negative torque; directing it along gives zero. More generally, sum to find the total torque about one common origin.
For a constant-mass point mass, the product rule and Newton's second law show why net torque changes angular momentum:
The first cross product vanishes because its factors are parallel. For a collection with canceling internal torques, the remaining sum is external torque, giving conservation of angular momentum when it vanishes.[ref]
A nonzero torque can turn the direction of angular momentum as well as change its magnitude. Indeed, the dot product gives : a perpendicular torque changes direction without instantaneously changing the magnitude. This is the geometry behind gyroscope precession. For a rapidly spinning symmetric top with a fixed tip, centre of mass distance from the tip, mass , and spin-dominated angular momentum magnitude , the slow steady precession approximation gives , where is gravitational acceleration. [ref] This is an approximation with ; the uniform precession of a heavy symmetric top retains contributions omitted by the spin-dominated estimate.
Torque-controlled homopolar dynamo equilibrium Created 2026-10-20 Updated 2026-11-05
For steady rotation at nonzero current, the electromagnetic braking torque is and balances applied torque . Thus , while the circuit requires . With , these give the displayed field and . This is a steady energy balance, not a general nonlinear stability claim.
Assume a constant positive mass , a twice differentiable trajectory in the fixed plane, a fixed origin in an inertial frame, and Newton's second law for the net force. The product rule gives the short proof
The term vanishes. This is the planar angular momentum balance written in area language.[ref]
On a connected time interval, areal velocity is constant if and only if throughout. Since both position and acceleration lie in the fixed plane, the net torque has only that normal component. For , zero net torque is therefore equivalent to net force parallel to : its instantaneous direction is central, possibly inward, outward or zero. This diagnoses the net force along this motion, not its dependence on position or time elsewhere. Opposing transverse forces may cancel.
A central force about a fixed origin gives conservation of angular momentum, irrespective of its radial dependence: an inverse-square law is sufficient but unnecessary. With nonzero conserved angular momentum, fixes the orbital plane. Zero angular momentum gives radial motion and zero areal velocity; it does not select a unique orbital plane. The converse needs the fixed-plane assumption: a constant projected areal velocity in three dimensions only constrains one torque component. Also, makes the instantaneous torque vanish regardless of force and makes plane polar coordinates singular. A moving origin or changing plane requires additional terms.
A path along a circle can have variable areal velocity. As an illustrative controlled trajectory, keep a point mass on a circle of radius with angle
Its acceleration in polar coordinates and the required net force are
where and are the radial and transverse unit vectors. A circular guide can supply the radial force, while a tangential drive supplies . Hence
For in illustrative units, the three equal time intervals , and sweep areas , and . Their difference comes from the transverse force's positive torque, even though the radius and path shape stay fixed. The area under each areal velocity graph segment equals the corresponding swept area.
Figure 1.
A transverse force gives increasing areal velocity and unequal swept areas in equal times
. Details.
Torque-free precession of a symmetric top Created 2026-10-18 Updated 2026-10-20
For an axially symmetric rigid body with and , no external torque means that angular momentum is fixed in an inertial frame. The axial angular velocity is constant by Euler equations for a torque-free rigid body, and the symmetry axis obeys
Its angle to is constant and it precesses in space at . The transverse angular-velocity components instead rotate in body coordinates at signed rate . These are different frame descriptions and must not be substituted for one another.
For a sphere of radius with prescribed surface slip and zero external torque, the Lorentz reciprocal theorem for Stokes flow gives
where points from the sphere into the fluid. Use an auxiliary rotating sphere in Stokes flow with arbitrary angular velocity and traction . The actual torque-free cross-work vanishes. Substituting the boundary velocity into the other cross-work leaves . A possible translation contributes zero because the auxiliary net force is zero.
Torque transport of energy in a steady accretion disk Created 2026-10-14 Updated 2026-11-05
For a steady Keplerian accretion disk with inward accretion rate and vanishing inner torque, the outward angular-momentum torque is . It transports energy outward at rate . The binding-energy acquisition rate between radii and is . Integrating the vertical viscous dissipation and then the annulus gives
Since , subtraction proves the displayed energy balance. Far from the inner edge , whereas the boundary torque powers vanish for the complete disk and . Local dissipation is therefore not supplied solely by local changes in orbital binding energy.
Torsional measurement of a complex shear modulus Created 2026-10-18 Updated 2026-10-20
A thin uniform circular rod of radius and length undergoing a small end twist of complex amplitude has shear-strain amplitude . A complex viscoelastic modulus gives shear-stress amplitude . Integrating the restoring torque gives
The area integral is the polar second moment of the cross-section, not a mass moment of inertia. For a disc of moment of inertia and negligible rod inertia, harmonic angular motion satisfies in a free-mode calculation, or equals the external torque amplitude in a driven measurement. The complex stiffness is a frequency-domain constitutive representation; a general real-time response has memory and cannot be described by putting an arbitrary frequency-dependent complex number into an instantaneous real equation.
Torsional stiffness 2026-10-25
The derivative of an axial torque with respect to relative end-rotation angle, evaluated at the operating configuration. In a linear torsion spring, .
Torsional stiffness per unit twist Created 2026-10-25 Updated 2026-11-05
For a uniform rod of length and twist per unit length , the end-rotation angle is . The chain rule gives , where is the torsional stiffness. If a source defines a normalized torque , its derivative is .
Torsional waves in a solid circular rod Created 2026-10-18 Updated 2026-10-20
For small torsional displacement , the transmitted torque is . A slice of length receives net torque and has axial moment of inertia . Its angular equation therefore gives the displayed wave equation, with wave speed . The same geometric factor cancels from inertia and stiffness, making this ideal torsional speed independent of rod radius. This long-wave circular-rod model neglects additional elastic modes and dissipation.
Torsion balance 2026-10-13
A torsion balance measures a weak torque by suspending a body from a thin fiber and reading its twist angle. The fiber supports the body's gravitational weight while permitting rotation about the suspension axis. In the range of linear elasticity, a twist in radians, measured from the untwisted reference orientation, produces a restoring torque
The torsion constant sets the sensitivity. At static equilibrium with an applied torque and no other axial torque, . A perpendicular force at lever arm therefore gives . The torsion balance measures a turning effect: a force whose line of action passes through the suspension axis gives no axial torque. The Cavendish torsion balance is the gravitational application; Coulomb's law supplies an electrical one. [ref]
Figure 1.
Torsion balance readout: fiber twist, force geometry, and returning the body to a fixed angle
. Details.
The original schematic separates two ways of reading the same torque. In deflection operation the top attachment stays fixed and the body rotates. In null operation the experimenter rotates the top attachment by while returning the body's laboratory angle to its original value. If the initially untwisted configuration has , the fiber twist is , not alone. Thus
For a positive applied torque, holding requires . Keeping the body at the same angle keeps the lever arm and source geometry fixed, making comparison of different applied forces easier. Either readout still requires a calibrated torsion constant and a stable reference orientation.
An illustrative calculation shows the amplification: with , , and , the applied torque is and the equilibrium twist is . These are stipulated values, not measured data. Reducing the torsion constant tenfold increases this twist tenfold, provided the fiber remains in its calibrated linear elasticity range. The cost is a slower response, explained by the oscillation period in torsion constant.
A concrete laboratory experiment is PASCO's Coulomb balance: level its counterbalanced rod, discharge both conducting spheres, and set the unloaded zero. Charge the spheres at maximum separation; switch off the charging supply. Move the second sphere to a known center separation , then turn the suspension dial until the rod returns to its index mark. Record the dial change and , recharge, and repeat at several separations. The manual recommends a draft-free room, clean insulating supports, and recharging before each reading: leakage, especially in humid conditions, otherwise changes the electric charges during the sequence. At close separations the conducting spheres redistribute charge, so the point charge approximation needs correction. [ref]
For constant electric charges and a fixed perpendicular lever arm, the Coulomb's law prediction is . Plotting the logarithm of twist magnitude against the logarithm of separation gives , so the predicted slope is . Absolute force measurement additionally needs the torsion constant; comparing ratios can eliminate it if it remains stable. Repeating a reference separation between other settings distinguishes a separation effect from a changing signal. A declining reading at the reference separation would invalidate the assumption of unchanged electric charges, even if a distance plot looks smooth.
The historical electrical example is Coulomb's first memoir of 1785. His apparatus enclosed a suspended needle with a small ball and a second ball; an adjustable head twisted the suspension. After charging the balls by contact, he reported angular separations , , and with head settings , , and . The total twists were approximately , , and : fourfold restoring torque accompanied approximately halved separation. These are his reported observations, not data from our diagrams. [ref] A precise reconstruction must use center distances and the changing lever arm, rather than identify angular separation exactly with distance; Alberto A. Martínez's replication explicitly analyzes that geometry. [ref]
Sensitivity also exposes changes of the apparatus itself. Fleischer and colleagues' cryogenic torsion balance used a temperature-controlled enclosure to reduce vacuum-vessel top-plate temperature fluctuations to approximately , limiting changes in suspension geometry from thermal expansion. They used a mild bake-out near to speed initial fiber relaxation and reduce slow zero motion. Their optical readout compared the pendulum mirror with an internal reference mirror to reject shared optical motion. Room-temperature thermal radiation entering through the optical opening heated the pendulum; a cold filter reduced that load. The authors could not directly measure the pendulum's temperature without disturbing it, and explicitly distinguished the cold shield's temperature from the body's. Cooling therefore requires checking the actual noise and thermal environment, rather than assuming that the fiber and body share the shield's temperature. [ref]
A useful control strategy is to record unloaded readings and temperature before and after each signal sequence, recalibrate the torsion constant under the same conditions, and compare forward and reverse settings. The algebra of torsion balance zero drift shows precisely which offsets such comparisons can cancel. A fine angular scale alone does not establish a small measurement error.
Torsion balance zero drift is slow motion of the unloaded reference angle during a measurement. If the torsion constant remains fixed, a constant applied torque gives . For two equal and opposite applied torques measured at the same reference zero, their equilibrium angles differ by . A stable offset cancels; a changing zero contributes and does not cancel automatically.
A simple symmetric sequence makes the limitation explicit. Let be settled equilibrium angles for applied torques at equally spaced times . If the unloaded zero is linear in time, , and and remain fixed, then
The arithmetic average of the outer zero values equals the middle zero, so both the constant offset and linear drift cancel. Curved zero motion, unequal time spacing, changing torsion constant, changing signal strength, or unsettled oscillations violate these assumptions. This is an algebraic control example, not a claim that every torsion balance follows a linear drift law.
Torsion constant Created 2026-10-14 Updated 2026-10-18
The torsion constant, or torsional spring constant, is the positive restoring torque per unit twist angle of a complete suspension in its linear elasticity range:
Its SI unit is . The minus sign describes restoration toward the untwisted orientation. The derivative specifies a local stiffness if the response is not globally linear; using one constant over a finite range additionally requires a straight calibration curve. Return to the same zero after unloading tests recoverable elastic deformation; repeat loading in both directions to check whether the response depends on its previous loading. Staying below permanent deformation is necessary, but does not alone prove proportionality between torque and twist.
For an ideal uniform circular wire of length , radius , and shear modulus , the filament torsional stiffness is , with polar second moment of area . Uniform twist gives as the twist per unit length, so
Here is stored elastic energy. Doubling the wire's radius multiplies the ideal torsion constant by ; doubling its length halves it. This explains why a long thin fiber is useful for weak torque measurement. The formula assumes linear elasticity with uniform material and circular section; it does not calibrate arbitrary ribbons, clamps, or a compound suspension. Within this ideal model, the equipartition theorem predicts an equilibrium thermal mean-square angular displacement , where is the Boltzmann constant and the uniform absolute temperature. A softer suspension magnifies both the signal and its thermal fluctuations.
Static calibration supplies known torques without assuming the unknown interaction being measured. Apply a known perpendicular force at lever arm , record the change from the unloaded twist, and use
Several positive and negative settings test proportionality; fit the slope of applied torque against twist and retain a possible intercept. A nonzero intercept must not be silently absorbed into the slope. Convert degrees to radians before reporting . PASCO's procedure turns the Coulomb balance on its side and adds small known masses to generate a gravitational weight at the sphere's lever arm, returning the rod to its index mark by turning the dial. Its tabulated coefficient is force per degree: multiply by the lever arm and to obtain our torsion constant. [ref]
Figure 1.
Toy torsion calibrations: static slope and a period corrected for viscous damping
. Details.
The figure's ideal static calibration uses : an applied torque of gives . Both signs lie on the same straight line. The plotted points are calculated examples, not experimental observations; they cannot demonstrate a real fiber's linearity.
Dynamic calibration instead measures the oscillation period with known total suspended moment of inertia . For negligible damping, small free oscillations about a fixed reference obey simple harmonic motion:
Include the rod, mirrors, and any attachments in unless their contributions are demonstrably negligible. Keep the applied torque absent or independent of angle. If an external torque has derivative at equilibrium, linearization gives effective stiffness : timing alone then measures that combination, and stability requires . A constant applied torque merely shifts equilibrium. Non-negligible damping changes the measured period; damped torsional oscillation gives a correction under a specified damping model. Agreement between static and dynamic calibrations is a useful check on the assumed moment of inertia, reference stability, and restoring law, rather than a reason to ignore their assumptions.
Torsion dynamometer 2026-10-14
A torsion dynamometer compares an applied torque with the restoring torque of a twisted elastic element. Returning the lever to its zero position allows a current-loop torque experiment to hold the test orientation fixed while reading the compensating torque.
Torsion of a solid circular shaft Created 2026-10-18 Updated 2026-11-05
A circular shaft twisted uniformly through small end angle over length has local engineering shear strain at radius . Its shear stress is , so the integrated torque is , using the polar second moment of area. The restoring torque has the opposite sign to the imposed twist. The stored elastic energy is . The circular cross-section is important: general noncircular sections can warp and have a different torsion constant.