The principle of transmissibility states that moving a force along its line of action preserves its external mechanical effect on an ideal rigid body. The force vector is unchanged, and its torque about every reference point is unchanged. The statement concerns external rigid-body motion or equilibrium; it does not assert unchanged internal deformation.
For an original proof, a nonzero force is applied at . Move it to , where and is a signed distance. The new moment is
The last cross product vanishes because its vectors are parallel. This is the same moment geometry used in the primary torque definition.[ref]
For a numerical example, let act at . Its moment is . Moving the application point to preserves that moment because the displacement follows the force direction. Moving it instead to gives . The second move needs an additional compensating couple to preserve the original wrench.
A one-dimensional elastic counterexample shows the rigid-body limitation. Consider a uniform bar along , fixed at the left end, with a rightward axial force applied to a cross-section at . In a small-strain axial model, internal force is on and zero on . Its right-end displacement is
where is Young's modulus and the section area. Applying the same force at instead gives , although both applied forces share one line of action and give the same external resultant and moment.
With stipulated , , and , the end displacement is for and for . The linear stress–strain relation underlying that calculation is described in the primary elasticity section.[ref]
A proposed comparison therefore measures support reaction and body deformation separately when changing load position along a common line. Equal reactions and moments can coexist with different local stress and displacement. The external free-body diagram may be equivalent while the internal loading model differs.
Prony brake Created 2026-10-14 Updated 2026-11-05
A Prony brake measures shaft power using a resisting band: its force difference gives torque , and rotation gives , where is angular velocity. The Stirling engine experiment above uses this independent load measurement to distinguish shaft output from gas-cycle work.
Pseudobulge 2026-11-05
A pseudobulge is a central stellar concentration in a disk galaxy whose structure and dynamics indicate growth through internal disk evolution rather than only rapid merger-driven assembly. A central brightness excess alone does not establish this origin.
Disk-like flattening, appreciable ordered rotation, nuclear spiral arms, galactic bars and ongoing star formation provide complementary diagnostics. A bar can torque gas and move it inward, feeding central star formation over a long timescale. Individual diagnostics are imperfect, so classifications combine imaging and kinematics instead of equating every low-index brightness profile with a unique history.[ref]
Pulley 2026-10-24
A wheel guiding a rope or cable so that it can redirect a tension force. An ideal fixed pulley changes the force direction without multiplying its magnitude. A freely rotating pulley with negligible moment of inertia and friction has equal rope tensions on its two sides; a finite moment of inertia instead relates their difference to its angular acceleration through the net torque.
A hanging mass pulls the centre of a uniform disc of mass up an incline of angle , using a light string and light frictionless pulley. If the disc rolls without slipping and the string is parallel to the slope, its effective translational mass is . With downward hanging acceleration , . Static friction has signed downslope component and supplies the rolling torque. The acceleration threshold is unchanged from a sliding block, although rotational inertia reduces the magnitude.
Pure torsion of an incompressible cylinder Created 2026-10-25 Updated 2026-11-05
A deformation map twisting every cross-section of a cylinder through an angle proportional to its reference axial position, without radial or axial extension. In the local current and reference cylindrical coordinate systems, the deformation gradient is . Its determinant is one. The twist per unit reference length is ; an end separation gives end rotation . The physical torque is .
This convention defines the gyrotactic reorientation time by an aligning rate . Multiplying the torque balance by and perturbing about the upward direction gives . For an incompressible flow, its horizontal divergence is , because . The parameter is half the reorientation parameter used in the convention with aligning rate ; writing the governing equation prevents a factor-of-two ambiguity.
Rack and pinion 2026-11-05
A rack and pinion is a meshing gear pair that converts between rotation and straight-line motion. The pinion is the circular gear and the rack has teeth along a straight path. The ideal motion is described using the gear pitch circle, rather than the outer tips of the teeth. Manufacturer diagrams compare rack travel over one full pinion revolution and show how tooth spacing affects that travel.[ref]
For a fixed pinion axis and a guided rack, let be the pitch-circle radius and choose consistent positive directions. With angular displacement in radians,
where and are angular velocity and angular acceleration. For an original example, and a quarter-turn give . A rotation rate of2revolutions per second gives .
Ideal lossless work transfer also gives
Thus a1newton-metre torque at the same20millimetre pitch radius corresponds to50newtons of tangential rack force. This is a kinematic and energetic model; it omits tooth deformation and friction. Backlash makes reversal especially important: a small rotation can take up clearance before the rack moves. The manufacturer's catalogue explicitly describes backlash adjustment through mounting geometry.[ref]
In a flywheel-based inerter, a rack and pinion makes relative terminal translation rotate the flywheel. The motion conversion then changes the apparent mechanical inertance without requiring the translating assembly to have that same physical mass.
Radius change at constant angular momentum Created 2026-10-14 Updated 2026-10-18
Place two equal point masses of each on opposite sides of a fixed origin, at equal radius , and let them share a signed angular velocity in a plane. Their total mass is and their moment of inertia about the perpendicular axis is . Radial pulling forces have zero torque about that origin, so
Take an initial radius and angular velocity , and a final radius . Then
and
These are endpoint states with . During the pull, the full kinetic energy also contains radial motion: . Assume the pulling apparatus supplies all net work to the two point masses; the work-energy theorem then fixes its net work at , including any radial acceleration and braking. Each mass spirals inward during the pull, allowing its inward force to do positive work. Conservation of angular momentum therefore predicts the final angular velocity without requiring kinetic energy conservation. For an apparatus included in a larger system, its stored energy supplies the increase consistently with conservation of energy. OpenStax uses the same mechanism to explain a skater pulling her arms inward. [ref]
A reference-point transformation of a pitching moment coefficient changes the location about which the aerodynamic torque is reported while leaving the physical loads unchanged. The pitching moment coefficient therefore requires a reference point as well as a sign, axis and normalization.
Let point from the old reference to the new reference , with force and moment vectors expressed in common axes. The wrench translation law is
It follows immediately by replacing each old force arm with before summing their cross products. The primary Drake spatial-force documentation gives the same old-to-new offset convention and unchanged force component.[ref]
For a planar example, choose positive aft, positive upward and the right-handed pitch axis so positive moment is nose-up. Write and . Dividing the pitch component by gives
Here is dynamic pressure, the reference area and the reference chord. The equation assumes those normalizations remain the same.
In a constructed case, , and an aft shift at the same height give . Adding an upward shift with changes it to 0.064. The aerodynamic loading has not changed between these reports.
A chordwise zero-moment point, when , satisfies
This is a center of pressure construction, not the definition of an aerodynamic center. If the normal force vanishes while the moment does not, no finite chordwise shift removes that moment. NASA distinguishes the force-plus-moment representation from placing a resultant at the center of pressure.[ref] Replacing by a lift coefficient additionally requires transforming between chord-normal and freestream-normal axes; changing a reference point alone performs no such rotation.
Resistive-force theory Created 2026-09-24 Updated 2026-11-05
Resistive-force theory approximates the local viscous force on a moving slender elastic filament by separate drag coefficients along and across its tangent. Let be the unit tangent and the material velocity relative to the ambient fluid. The force per unit length on the elastic filament is
The positive parallel and perpendicular drag coefficients of a slender filament are defined per unit length; for a sufficiently slender isolated body, their leading logarithmic ratio is .
The directional difference can generate propulsion. For example, take a straight element with and impose transverse velocity . Direct substitution gives
A transverse motion of a tilted element therefore has an axial force component. In a propagating flagellum deformation, the correlation of tilt and transverse velocity can produce nonzero mean thrust. For a freely swimming body, the unknown translation and rotation follow by imposing zero total external force and torque, including the resistance of the head if present.
This is a local Stokes flow approximation. It neglects the nonlocal hydrodynamic interactions retained by slender-body theory, so nearby boundary conditions, tightly spaced elastic filaments and detailed end effects can require a more complete model.
The leading second-order specific torque on a collisionless distribution from a weak steadily rotating perturbation with and . The sum includes conjugate harmonics. Linear response in action-angle variables gives the finite-time kernel ; its integrated long-time resonance kernel selects orbital resonances. This limit assumes a smooth continuum, regular resonant surfaces and negligible secular redistribution during the response calculation.
Resultant force 2026-10-31
The vector sum of applied forces. To replace a force system on a rigid body by a single force, its line of action must also reproduce the original torque; a nonzero force couple cannot be replaced by one force.
Rheology Created 2026-09-24 Updated 2026-11-05
Rheology studies how matter deforms and flows under applied stress, including the dependence on loading history and observation time. Its central task is to connect a measured stress to strain, strain rate and relevant internal state through a constitutive equation. A Newtonian fluid has an instantaneous proportional response to strain rate; an elastic solid responds to strain; a viscoelastic material retains information about previous deformation.
These differences can be exposed by changing the experiment rather than only changing the load. Holding stress fixed measures material creep; holding strain fixed measures stress relaxation; small-amplitude oscillatory shear separates storage modulus from loss modulus. A rheometer supplies controlled motion and measures the resulting force or torque. Such measurements help predict whether a paste will remain in place, how much pressure is needed to drive a fluid flow, and whether a material will recover after loading.
Rheometer Created 2026-09-24 Updated 2026-11-05
A rheometer imposes a controlled stress or deformation and measures the complementary response. In a rotational instrument, a sample fills a gap between surfaces such as concentric cylinders, parallel disks or a cone and plate. The directly controlled or measured quantities include torque, angular displacement and angular velocity; the geometry converts these into shear stress, shear strain and shear rate.[ref]
For example, a small-angle cone-and-plate rheometer produces approximately uniform shear rate and shear stress , with cone angle , radius , rotation rate and measured torque . A parallel-plate rheometer instead has a radius-dependent shear rate. The conversion therefore requires the appropriate flow model. Wall slip, edge failure, temperature drift and the instrument's own inertia can mimic a material response, especially for very weak or rapidly varying signals.
For two perpendicular rods of length joined at one endpoint, the slender-body force density gives translation resistance , rotation resistance , and translation–rotation block . The opposite block is its transpose. Here is the torque about the joint and the force on the fluid. Integrating along each rod proves the entries and makes the symmetry and positivity of a rigid-body resistance matrix explicit.
Robert R. Filler 2026-11-05
Robert R. Filler is a coauthor of experimental mechanical-engineering work on face gear transmissions. The2002 report with Gregory F. Heath and Jie Tan identifies all three with The Boeing Company in Mesa, Arizona. Their report documents design, manufacture and testing of a scaled250-horsepower proof-of-concept split-torque transmission.[ref]
The experiment made load balance measurable. The input pinions were slow-rolled under torque supplied through weights, pulleys and cables, while tooth-root strain gauges recorded deformation associated with load. Measurement calibration was needed to convert those indications into an estimate of the torque division. The reported full two-pinion/two-idler configuration gave approximately48% and52% at the upper and lower input-pinion meshes.[ref]
For an illustrative normalization to100N·m total input torque, those fractions correspond to48 and52N·m. The larger branch is4% above an ideal50N·m equal share, even though the two branches differ by4N·m. The distinction matters when comparing a measured torque split with the load intended for each path. Filler's documented contribution is as a coauthor of the experimental transmission study; the result depends on the complete tested arrangement.
Robotics 2026-11-05
Robotics studies the design, modelling and control of machines that interact with their surroundings through sensing and motion. A robot combines sensors, actuators, computation and a mechanical structure. A robot arm must relate joint motion to the position and orientation of its end effector; a mobile robot must also estimate where it is relative to its environment.[ref]
Kinematics asks which motions a mechanism permits. Dynamics determines the forces and torques needed to produce them, while feedback control corrects deviations using measurements. A desired path is useful only when the mechanism can realize it within constraints such as motor effort, contact and obstacles. These connections make robotics a meeting point of mechanics, geometry, statistical inference and control theory.
A rigid pendulum tilted from the upward vertical and driven at fixed azimuthal angular velocity has effective potential . With , its upright equilibrium loses linear stability when passes . At equality the leading restoring torque is cubic and the potential has a positive quartic minimum. This gives a stable quartic oscillator with zero infinitesimal harmonic frequency, rather than a freely drifting neutral state.
Rotational diffusion Created 2026-10-14 Updated 2026-10-18
Rotational diffusion is the random change of a particle's rigid body orientation through Brownian motion. A suspended ellipsoid can turn while its centre hardly moves; translational diffusion instead spreads its position. Random molecular collisions supply fluctuating torques as well as forces. The rotational diffusion coefficient measures how quickly angular uncertainty grows, rather than a steady spin speed. Its units are , often written to distinguish angular spreading from translational spreading, whose diffusion coefficient has units . The radian is dimensionless, but writing angular variance in remains useful.
First identify what the image can reveal. A marked end of an elongated particle defines an arrow: turning it through reverses that arrow. An unmarked ellipsoid with identical ends reveals only its long axis, a director: angles and describe the same visible state. An unmarked perfect sphere has no visible rigid body orientation at all. Tracking its centre cannot measure its rotational diffusion; a surface mark or another identifiable internal direction is needed.
This distinction makes rotational diffusion useful: it measures how long a particle remembers its pointing direction. For an elongated particle, turning also changes which laboratory direction is easiest for translational diffusion. Randomization of rigid body orientation can therefore erase directional preferences in the observed displacement, even though the particle's shape has not changed.