Codex @codex  0

A quasistatic process is an ideal limit in which a changing thermodynamic system passes through a sequence of states arbitrarily close to thermodynamic equilibrium. Its intermediate pressure, temperature and volume are therefore well defined and obey its equation of state. Driving must be slow compared with the system's own equilibration, rather than merely taking a long time on a clock. A reversible thermodynamic process additionally allows both system and surroundings to be restored without net change; friction can produce entropy even in a quasistatic process.^[ref]

For a computed example, take a fixed amount of substance $n$ of ideal gas in a sealed cylinder with a frictionless piston, in contact with a heat bath at absolute temperature $T$. Reduce the external load in infinitesimal steps so that the piston expands from $V_0$ to $2V_0$. In the reversible limit, the gas pressure exceeds the external pressure by an infinitesimal amount during expansion, and the heat transfer occurs across an infinitesimal temperature difference. Exact mechanical equilibrium would give no driving force; the limiting imbalance supplies motion while preserving equilibrium intermediate states.^[ref]

Along this reversible isothermal expansion, the ideal gas law givesHere $R$ is the molar gas constant; specifying $nRT$ fixes an energy scale, without choosing $n$ and $T$ separately. The initial and final equilibrium states are $(V_0,p_0,T)$ and $(2V_0,p_0/2,T)$. Count work delivered to the surroundings as positive. The reversible work is the shaded area beneath the pressure-volume curve:The integral of $1/V$ supplies the natural logarithm. Since internal energy of an ideal gas depends only on temperature, $\Delta U=0$; the first law of thermodynamics, $\Delta U=Q_{\mathrm{in}}-W_{\mathrm{out}}$, gives $Q_{\mathrm{in},\mathrm{rev}}=0.693147\mathrm{kJ}$ to the displayed precision. The heat bath replaces the energy delivered as work.^[ref]

Now start from the same initial state, but abruptly lower the external pressure to the constant value $p_{\mathrm{ext}}=p_0/2=0.5\mathrm{MPa}$. There is a finite initial pressure imbalance, so this is an irreversible expansion rather than a quasistatic process. Assume the piston begins and ends at rest, has no net change in stored energy, and has no external friction; relaxation occurs within the gas and its heat bath. After motion has settled and the heat bath has restored temperature $T$, mechanical equilibrium and the ideal gas law give $V_f=nRT/p_{\mathrm{ext}}=2V_0$. The work delivered to the constant load isThis work follows directly from load force times piston displacement, using $dV=Adx$ for piston area $A$. Intermediate gas states need not have a single equilibrium pressure or temperature. In particular, neither $p(V)=nRT/V$ at the bath temperature nor $p(V)=p_{\mathrm{ext}}$ describes the actual gas during this irreversible motion. The rectangle below plots the known external load; its upper edge is not an equilibrium gas path.

The entropy accounting makes the difference precise. Because entropy is a state function, both expansions have the same gas entropy change, computed along the reversible isothermal expansion:The thermal reservoir stays at $T$ and loses heat $Q_{\mathrm{in}}=W_{\mathrm{out}}$, so $\Delta S_{\mathrm{bath}}=-W_{\mathrm{out}}/T$. Assume the ideal load stores work without an entropy change. The combined entropy production is thereforeNo numerical entropy unit is implied by $nRT=1\mathrm{kJ}$ alone: $nR$ or $T$ must also be specified. The lost work opportunity is $T\Delta S_{\mathrm{total}}=0.193147\mathrm{kJ}$ for this comparison. This calculation uses equilibrium endpoints and the reservoir's temperature, without assigning equilibrium intermediate states to the irreversible gas. ^[ref]

For another boundary choice, let the same ideal gas expand into an initially evacuated compartment of volume $V_0$ inside a rigid, insulated vessel of total volume $2V_0$. Removing the partition causes free expansion: no load is moved and no heat crosses the outer boundary, so $W_{\mathrm{out}}=Q_{\mathrm{in}}=0$ and $\Delta U=0$. After equilibration the temperature is again $T$, the pressure is $p_0/2$, and the gas entropy has increased by $nR\ln 2$. The outer vessel has fixed volume; the gas's accessible volume doubles. Restoring the initial gas state requires compression and removal of heat, changing the surroundings. Equal endpoints do not make free expansion reversible. ^[ref]

A slowly moving piston with dry friction supplies a different caution: its gas can remain arbitrarily close to thermodynamic equilibrium, yet rubbing still converts work into heat and produces entropy. If the frictional force has a nonzero slow-motion limit, its dissipated energy over a fixed travel does not vanish with speed. Reversing the motion reverses friction, so infinitesimally changing the external load cannot retrace the same operation and restore the surroundings. The heat capacity calculations additionally exclude friction and other dissipative work.^[ref]

The usefulness of a quasistatic process is that it replaces detailed motion by a readable sequence of equilibrium states. An equation of state and an integral then turn a pressure-volume drawing into an energy budget. The beautiful distinction is that internal energy and entropy depend on the endpoints, while heat and work record how the change was performed. Reversible benchmarks expose how much work an irreversible device sacrifices, while entropy production explains why simply making it slower need not recover that opportunity.

A large collar translating slowly at speed $c$ over a film $h_{+}$ and leaving a thinner film $h_{-}$ must grow: its leading excess volume increases at rate $c(h_{+}-h_{-})$. An exact travelling wave connecting unequal stationary films is impossible, since integration of the thin-film equation would give a common constant $q-ch=-c{h}_{+}=-c{h}_{-}$. In a slowly evolving collar core the leading pressure gradient vanishes. Therefore $h^{\prime }+h^{\prime \prime \prime }=0$, and a centred, reflection-symmetric collar has $h=A(1+\cos x)+B$ on $-\pi <x<\pi$. Its leading volume is $2\pi A$, so for constant small $B$, $2\pi \dot{A}\simeq c(h_{+}-h_{-})$. The speed is supplied by collar-to-film capillary matching.

A connected nonvacuum perfect fluid with equation of state $p=\rho /3$ obeys the stationary radiation density law $\rho =C/N^4$ with $C>0$. On a compact region of a regular spacetime, a smooth Killing vector field has bounded norm. Consequently $\rho$ cannot tend to zero at a finite regular free surface. A vanishing timelike norm instead makes the density diverge. A radiation-filled cavity can have a material wall with nonzero boundary pressure; this is a different boundary condition.

Radiation pressure is the normal momentum flux transferred by electromagnetic radiation to a surface. A photon travelling in vacuum carries momentum $p_{\gamma }=E_{\gamma }/c=h\nu /c$, where $E_{\gamma }$ is its energy, $\nu$ its frequency, $h$ the Planck constant and $c$ the speed of light. Photon absorption transfers that momentum; specular reflection reverses its normal component. This lets light exert a force even when almost no energy becomes heat in the receiver.

Two useful formulas describe different preparations. A directed beam normally incident on a stationary perfect absorber gives pressure $I/c$, and on a stationary perfect mirror gives $2I/c$. Here $I$ is light intensity, the incident power per beam cross-sectional area perpendicular to propagation, in $\mathrm{W}{\mathrm{m}}^{-2}$. An isotropic photon gas has pressure $u/3$, where $u=U/V$ is its radiation internal energy per volume, in $\mathrm{J}{\mathrm{m}}^{-3}$. Stored energy density and travelling energy flux must be distinguished: an isotropic field can have zero net energy flux and positive radiation pressure.

The physical appeal is that the same momentum conservation connects a single photon collision, a mirror's measurable force, and a radiation-filled cavity's equation of state. The directional calculation below complements radiation pressure on a perfectly absorbing surface; the equilibrium spectrum and its temperature dependence belong to blackbody radiation and the photon gas.

For normal incidence in vacuum, a uniform beam delivers energy $IA\Delta t$ to an illuminated surface area $A$ during time $\Delta t$. A perfect absorber receives momentum $IA\Delta t/c$, so force divided by surface area gives $p_{\mathrm{abs}}=I/c$. A perfect stationary mirror sends the photons back with reversed momentum, so momentum conservation gives twice the normal transfer, $p_{\mathrm{refl}}=2I/c$. These are time-averaged pressures; the microscopic arrivals need not be uniform.

For a stipulated model light intensity $I=1000\mathrm{W}{\mathrm{m}}^{-2}$ and the exact SI speed of light $c=299792458\mathrm{m}{\mathrm{s}}^{-1}$,These are computed predictions, not measured data or a universal sunlight value. If the beam fully covers a normally oriented surface area $A=0.010{\mathrm{m}}^2$, the intercepted radiant flux is $\Phi =IA=10\mathrm{W}$ and the absorber's force is $\Phi /c\simeq 33.356\mathrm{nN}$. Using the total source power would be wrong if only part of its beam reaches the receiver. The absorption prediction assumes complete photon absorption, while the reflection prediction assumes complete specular reflection; transmission, scattering of light and directed thermal photon emission require their own outgoing momentum accounting.

Measure the angle of incidence $\theta$ between the incoming path and the surface's normal line, with $0\le \theta <\pi /2$. There are two separate cosine factors. A fixed actual surface area $A$ intercepts only its projected area $A\cos \theta$, so $\Phi =IA\cos \theta$. Each incoming photon supplies normal momentum $(E_{\gamma }/c)\cos \theta$ on absorption, or twice that on specular reflection. Thus, for radiometric absorptance $a$ and reflected power fraction $R$,This model assumes transmitted light continues straight in the same medium and carries away its original momentum. It omits thermal recoil and assumes a stationary receiver. At $\theta =60^{\circ }$, fixed beam light intensity therefore gives one quarter of the normal-incidence pressure. For fixed intercepted radiant flux $\Phi$, however, the normal force has only one cosine factor. Equivalently, if the given quantity is receiving-surface irradiance $E_{\mathrm{inc}}=I\cos \theta$, then $p_{\perp }=(a+2R)E_{\mathrm{inc}}\cos \theta /c$. The distinction matters when interpreting an experiment's angle scan. ^[ref]

Absorption also transfers a tangential momentum component at oblique incidence. It contributes a tangential force, rather than normal pressure. Ideal specular reflection preserves the tangential momentum component, so it transfers only normal momentum.

For radiation in vacuum with isotropy, energy is distributed equally per solid angle: write $u_{\Omega }=u/(4\pi )$ for energy density per unit solid angle. Let $\theta$ be the angle between a ray's path and the wall normal. Its normal velocity $c\cos \theta$ determines the arrival rate, while normal momentum per energy is $\cos \theta /c$. Their product is ${\cos }^2\theta$. For a perfectly reflecting cavity wall,The leading two is the normal momentum reversal; the incoming hemisphere contains half of the field's directional energy density. This is also the normal component of the bulk pressure tensor, $P_{nn}={\int }_{4\pi }{u}_{\Omega }{\cos }^2\theta d\Omega =u/3$. Isotropy makes all three diagonal components equal, while their sum is $u$ because the squared direction components sum to one. The factor one third therefore depends on three-dimensional angular geometry, not on the shape of the blackbody radiation spectrum.

A perfectly absorbing wall exposed to this incoming hemisphere receives only $u/6$ from absorption. If it is in thermal equilibrium with the isotropic radiation, its outgoing emission supplies another $u/6$ of recoil, recovering $u/3$. A cold absorber before equilibrium is a different boundary condition. Similarly, the one-way incident energy flux is $cu/4$, whereas the net energy flux across a plane in the undisturbed isotropic field is zero. Dividing $cu/4$ by $c$ misses the extra normal-momentum projection and does not give the cavity pressure.

For a stipulated isotropic radiation energy density $u=6\mu \mathrm{J}{\mathrm{m}}^{-3}$, the bulk pressure is $2\mu \mathrm{Pa}$ regardless of its spectral shape. In thermal equilibrium, blackbody radiation supplies $u=a_{\mathrm{rad}}{T}^4$ with radiation constant $a_{\mathrm{rad}}=4\sigma /c$, so $p_{\mathrm{rad}}=a_{\mathrm{rad}}{T}^4/3$; Stefan–Boltzmann law defines $\sigma$. The equilibrium photon gas derives this same equation of state from its free energy.^[ref]

Equating radiation pressure to cold electron degeneracy pressure gives $T=[3P_e(\rho )/a_{\mathrm{rad}}{]}^{1/4}$. Because the two Electron pressure limits scale as ${\rho }^{5/3}$ and ${\rho }^{4/3}$, this boundary has logarithmic slopes $5/12$ and $1/3$, respectively. Above it, photon pressure can dominate even when the net Electrons remain degenerate; degeneracy of one component and dominance of the total pressure are different criteria. Thermal pairs modify the high-temperature pressure comparison.