Use the point and the orthonormal basis of directions in the cutting plane
Both vectors are orthogonal to the normal vector , so every point of the plane has unique coordinates
Substituting into the cone equation gives
Consequently the intersection has equation
Because these are orthonormal coordinates, their lengths are the actual lengths in the plane. Thus this is an ellipse with semi-major axis and semi-minor axis , not merely a projected ellipse. By a, its eccentricity is
For a fixed point not on a fixed line , the ellipse with focus of a conic , directrix of a conic and eccentricity is the locus of points satisfying
Set and . One matched focus of a conic and directrix of a conic pair is
Indeed the squared distance condition is
Expanding and cancelling the terms linear in gives
which is exactly . Both sides of the unsquared distance condition are nonnegative, so squaring introduces no extra points. Reflecting across the -axis gives the other matched pair: and , with the same eccentricity.
The value is twice the signed area of the triangle traversed in that order; it is positive for counterclockwise orientation. Choose points on the parabola
For , subtracting the first row in the determinant and factoring gives
Each of the three factors is positive, proving the required property for every integer .
Subtracting the first row from the other two in the determinant gives
This vanishes exactly when the two displacements and are linearly dependent. If , that means for some real number . Thus all three points lie on the line
Conversely, putting three points on any one line makes their displacements linearly dependent, so the determinant vanishes.
The equivalence remains true without distinctness. If exactly two points coincide, the two distinct locations determine a line containing all three, and two rows of the original determinant coincide. If all three points coincide, any line through that point works and the determinant is again zero. Existence persists, although uniqueness of the line can fail.
For vectors , the scalar product, cross product and scalar triple product are respectively
Expanding the dot product gives
Interchanging and changes the sign of their cross product, so its dot product with is also zero. Thus the cross product is orthogonal to both vectors, including when it is the zero vector.
The displayed scalar triple product is a determinant. A square matrix has nonzero determinant exactly when its rows are linearly independent. Hence
Start with . At stage , form the midpoint . If , stop; for a sequence defined for all later indices, repeat forever. Otherwise retain the half-interval with opposite endpoint signs: set if , and otherwise. This is the bisection method.
If it never stops, the closed intervals are nested, retain , and have lengths
By the nested interval theorem, there is a unique real in their intersection. In particular, , , and the sequence of midpoints satisfies
Since is continuous, . All these products are negative, so their limit of a sequence is nonpositive. Therefore , forcing . We have proved that the sequence is a convergent sequence whose limit of a sequence is a zero of a function:
The error bound applies at every stage before exact termination; after termination the error is zero. The intermediate value theorem also guarantees a zero of a function in each retained interval, but the nested-interval argument identifies the particular one to which the sequence of midpoints converges.
For a uniform solid cylinder, set in the moment of inertia formula, giving
For the hollow cylinder, makes the denominator larger:
on a downward incline with . Thus the solid cylinder accelerates faster, assuming rolling without slipping for both. More of the hollow cylinder's mass lies far from the rotation axis, increasing its moment of inertia relative to .
Choose positive downhill and positive in the corresponding rolling direction, with initially. For rolling without slipping, the contact point has zero velocity, so . Integrating the rolling constraint gives
Let be the uphill static friction. Along the inclined plane, Newton's second law for the centre of mass gives
The weight passes through the centre of mass, and the normal reaction has its line of action through it. Thus only static friction supplies torque about . The angular velocity is along the cylinder's symmetry axis, so the inertia tensor gives angular momentum in that direction. The torque equation is therefore
Eliminating static friction and inserting gives
The extra term represents the rotational inertia that must be accelerated along with the translational mass.
By symmetry, the centre of mass is . Choose horizontal axes through and the vertical symmetry axis as the third axis, writing . With uniform mass density , the inertia tensor has entries
Reflection in each coordinate plane makes all the mixed integrals , , and vanish. Rotational symmetry about the vertical axis gives . Thus these are principal axes and
The axial moment of inertia of a hollow cylinder is
Its mass is . Dividing and factoring the difference of squares gives
In terms of the positive cylindrical radius , the conserved mechanical energy becomes
The effective potential tends to infinity at both ends of for , and . Thus its two turning points enclose the allowed radial motion. At a turning point, , so
Besides , the positive root of a polynomial is
the other root of a polynomial is negative. The quadratic polynomial is negative at zero and has just one positive root of a polynomial. Since , we have when , and when .
Height is , so its maximum occurs at the smaller positive turning point. Hence
Indeed, the initial vertical acceleration is
Below the critical speed the particle first rises to ; above it the particle initially descends, and its initial height is already its greatest height. At the turning points merge and the particle follows a horizontal circular orbit at . For zero initial speed the radial conservation of energy gives motion to the apex level ; if the hole excludes the apex itself, zero is the supremum of the heights before arrival at the hole.
These are the heights under the maintained mechanical constraint used in part (a). A unilateral contact with only one side of a cone would additionally require checking the sign of the normal reaction; the ideal constrained equations alone do not impose that condition.
Use as the gravitational acceleration, so the weights are and , consistently with the requested equations. The printed introductory phrase calling a force magnitude omits the factor .
For the particle on a cone coupled to a hanging mass, write and use the cylindrical coordinates unit vectors . The ideal string segment from the cone particle to the hole has length and direction . If is the downward length of the hanging segment and the fixed total length, then
The light ideal string and smooth hole give the same tension on both sides. Applying the vertical component of Newton's second law to the hanging particle gives
Write the normal reaction on the cone particle as , allowing to be signed according to the side of the ideal constraining surface. The acceleration in cylindrical coordinates and Newton's second law give
There is no azimuthal force. Multiplying the middle equation by proves
where the positive angular direction is chosen along the initial velocity. This is conservation of angular momentum about the vertical axis.
Subtract the radial equation from the vertical equation to eliminate the normal reaction. Since , this gives
Substitute the tension and the conserved angular momentum, using :
Multiplication by now gives an exact time derivative:
Initially and , because the initial velocity is horizontal. Therefore
This is also total mechanical energy divided by , with an irrelevant constant removed: the two particles contribute to the radial and vertical kinetic energy, while their combined gravitational potential energy is plus a constant.
Measure as horizontal displacements from the respective downward equilibrium positions; the absolute horizontal coordinates are and . Each vertical displacement is of second order in its small angle. Thus the spring is horizontal to first order, its extension is , and Hooke's law gives horizontal forces and . Combining these with the linearized simple pendulum restoring force yields
For the normal modes of two spring-coupled equal pendulums, add and subtract these ordinary differential equations. The normal mode coordinates and satisfy
Hence the two natural angular frequencies and displacement patterns are
Ordinary frequencies are and . In the first normal mode, both particles swing together with equal amplitudes and the spring is unextended to first order. In the second normal mode, the particles swing in opposite directions with equal amplitudes, so the spring adds a restoring force and increases the angular frequency.
Figure 1.
The two normal modes: equal displacements together and equal displacements in opposite directions
. Details.
Take the pivot as origin, with horizontal and vertically upward. For the simple pendulum, put
The velocity and acceleration are
The forces are the tension and gravity . Taking the dot product of Newton's second law with eliminates the tension and gives
Near the downward stable equilibrium , the small-angle approximation gives to first order. Since , its linearization is
This is simple harmonic motion with angular frequency ; the restoring sign confirms the stable equilibrium.
Use the polar radius as the parameter of the Archimedean spiral. Its angle in polar coordinates is . The radial and angular contributions to its arc length are orthogonal, so
There is no need to evaluate this integral. The simple bounds imply
The squeeze theorem therefore gives the scaled length of an Archimedean spiral:
Geometrically, the radial contribution becomes negligible after multiplying the arc length by ; the remaining contribution is the area under the function graph on .
The partial derivatives of this parametrized surface are
Their cross product is
The mixed terms cancel in its squared Euclidean norm:
Since , the surface area element is . There is no repeated coverage: recovers , and then recovers . Therefore the surface area is
A nondegenerate hyperbola centred at the origin has a quadratic equation
There are no linear terms because the origin is its centre. Its asymptotes are the zero set of the homogeneous quadratic form . Requiring the directions and gives , hence and . Since the conic section is nondegenerate, and are nonzero. Thus all such hyperbolas with prescribed asymptotes are exactly
For these rectangular hyperbolas open along the -axis, and for along the -axis. Conversely, each displayed hyperbola has the required centre and asymptotes. Two distinct members have different values of , so they cannot intersect.
For the second pair of asymptotes, the same argument gives , . The intersections of concentric hyperbolas therefore satisfy
If both right sides are positive, there are four independent sign choices. If precisely one is zero and the other is positive, there are two points. If either is negative there are none; both cannot vanish because . Each possibility occurs: take for four, for two, and for none. Hence

Pinned article: Introduction to the OurBigBook Project

Welcome to the OurBigBook Project! Our goal is to create the perfect publishing platform for STEM subjects, and get university-level students to write the best free STEM tutorials ever.
Everyone is welcome to create an account and play with the site: ourbigbook.com/go/register. We belive that students themselves can write amazing tutorials, but teachers are welcome too. You can write about anything you want, it doesn't have to be STEM or even educational. Silly test content is very welcome and you won't be penalized in any way. Just keep it legal!
We have two killer features:
  1. topics: topics group articles by different users with the same title, e.g. here is the topic for the "Fundamental Theorem of Calculus" ourbigbook.com/go/topic/fundamental-theorem-of-calculus
    Articles of different users are sorted by upvote within each article page. This feature is a bit like:
    • a Wikipedia where each user can have their own version of each article
    • a Q&A website like Stack Overflow, where multiple people can give their views on a given topic, and the best ones are sorted by upvote. Except you don't need to wait for someone to ask first, and any topic goes, no matter how narrow or broad
    This feature makes it possible for readers to find better explanations of any topic created by other writers. And it allows writers to create an explanation in a place that readers might actually find it.
    Figure 1.
    Screenshot of the "Derivative" topic page
    . View it live at: ourbigbook.com/go/topic/derivative
  2. local editing: you can store all your personal knowledge base content locally in a plaintext markup format that can be edited locally and published either:
    This way you can be sure that even if OurBigBook.com were to go down one day (which we have no plans to do as it is quite cheap to host!), your content will still be perfectly readable as a static site.
    Figure 5. . You can also edit articles on the Web editor without installing anything locally.
    Video 3.
    Edit locally and publish demo
    . Source. This shows editing OurBigBook Markup and publishing it using the Visual Studio Code extension.
  3. https://raw.githubusercontent.com/ourbigbook/ourbigbook-media/master/feature/x/hilbert-space-arrow.png
  4. Infinitely deep tables of contents:
    Figure 6.
    Dynamic article tree with infinitely deep table of contents
    .
    Descendant pages can also show up as toplevel e.g.: ourbigbook.com/cirosantilli/chordate-subclade
All our software is open source and hosted at: github.com/ourbigbook/ourbigbook
Further documentation can be found at: docs.ourbigbook.com
Feel free to reach our to us for any help or suggestions: docs.ourbigbook.com/#contact