The fluid is outside the body, so its normal on the inner boundary is . Let be traction on the body's surface from the fluid. For an exterior point and a flow vanishing at infinity, the boundary representation reads
For , expand the single layer through its first moment and the double layer through its zeroth moment:
The next single-layer and double-layer terms are both at fixed body size and boundary data. Differentiating gives
Hence the dipole terms combine into
The antisymmetric part obeys for . For the symmetric trace-free tensor , . Also . Substitution gives
This derives the Stokes far-field multipoles of a deforming body. is the force exerted by the body on the fluid, the negative of the integrated fluid traction. is its torque on the fluid: . Their kernels are the Stokeslet and rotlet. is the rate of increase of the body's volume, by the Reynolds transport theorem. It gives a radial source flow with volume flux . A volume-preserving body has . The trace-free tensor gives the stresslet, which can remain nonzero for a force-free, torque-free swimmer.
Let point out of the drop, and use for the interior and for the exterior. The interfacial velocity is continuous. Define ; for a sphere of radius it is . With constant surface tension, the interfacial stress balance with variable surface tension reduces to
Use the exterior-viscosity kernels to define and . The interior viscosity is , so its velocity kernel is , while its stress kernel is unchanged. The interior boundary equation is
For the decaying exterior flow, the inner boundary's fluid-domain normal is , so
Add these equations and use the traction jump. The required capillary boundary integral equation for a viscous drop is
The formula uses the drop-outward normal consistently in both integrals. If , the double-layer term cancels. A spherical drop of constant curvature has zero velocity: a constant Laplace-pressure jump is balanced without motion. A prescribed ambient flow would add its known far-boundary contribution; none is present for the surface-tension-driven flow here.
Potential-vorticity conservation makes the evolving PV distribution a set of parcel-carried labels. In the ideal model it can be rearranged into filaments and complicated geometry, but it is not created or destroyed by advection. Apparent homogenization, such as that assumed for the shallow-water experiment, describes a coarse-grained mixed distribution rather than pointwise destruction of materially conserved PV.
Within a balanced regime, potential-vorticity inversion turns those labels and the boundary data into a velocity field. This makes understanding a flow a coupled geometric problem: determine how PV is rearranged, invert the resulting distribution, and use the recovered velocity to find the next rearrangement. Inversion is nonlocal, so a compact PV anomaly influences fluid well outside its support, as the spherical example explicitly demonstrates.
The quasi-geostrophic potential-vorticity equation has only one time derivative:
An initial PV field and the inversion data determine the balanced evolution; an independent initial acceleration is not needed. Pressure, buoyancy and the leading velocity are diagnosed from that field at each instant. This reduced initial-data requirement reflects the removal of freely oscillating inertia-gravity waves, which in the full fluid equations require additional initial information. The principles are consequently powerful for slow large-scale flow, but do not recover every unbalanced motion or remove the need to state boundary conditions and the balance approximation.
Relative vertical vorticity is the horizontal Laplacian of the streamfunction, not its full stretched three-dimensional Laplacian. Inside the spherical potential-vorticity anomaly, the quadratic solution gives
Outside, in the equatorial plane , let and . The azimuthal velocity is , so
The opposite signs thus follow directly from solid-body rotation inside and the exterior velocity's rapid radial decay. The azimuthal velocity itself has the same rotational sense on both sides; its radial derivative makes the exterior relative vorticity negative.
There is no contradiction with the zero exterior PV anomaly. At the exterior solution has , so . The stratification/stretching contribution compensates the horizontal relative vorticity. Inside it contributes , supplementing to give the prescribed excess .
Let denote the small excess PV in the spherical region, with for quasi-geostrophic consistency. Let its stretched radius be and set . Spherical symmetry of the source and uniqueness of the decaying inversion imply a radial streamfunction. Its equations are
Regularity at the origin removes the interior term. Decay removes the exterior constant. Integrating gives and . Since the source has no surface delta function, and match at . Their matching fixes and . Therefore the spherical potential-vorticity anomaly has
Its induced horizontal flow is
This flow is azimuthal about the vertical axis, so it is tangent to the PV level surfaces and advects no part of this axisymmetric distribution across its spherical boundary. The example is therefore steady under the quasi-geostrophic PV evolution. In physical coordinates the stretched sphere is the ellipsoid , with vertical semiaxis .
Potential-vorticity inversion is the diagnostic recovery of the balanced flow from the instantaneous PV distribution, together with appropriate boundary or far-field data. In the unbounded constant- case the mathematical problem is the Poisson equation
Require a regular solution, with interface continuity in a piecewise-smooth case. For a compactly supported bounded anomaly, the unique decaying solution is the Newtonian-potential integral
The sign follows from . A nonzero total anomaly gives a far-field streamfunction, which is allowed by the stated decay condition. The measure is in stretched coordinates; converting to physical coordinates introduces their volume Jacobian.
Two regular solutions with these data differ by a harmonic function tending to zero, which must vanish by the maximum principle. This also excludes imposed uniform currents or shear fields encoded by nondecaying harmonic additions and fixes the irrelevant additive pressure gauge. Once is found, , and follow. The smaller vertical and ageostrophic velocities require the next-order balance equations.
PV is not by itself an inversion variable for arbitrary unbalanced fluid motion: the quasi-geostrophic approximation supplies the diagnostic geostrophic and hydrostatic relations, filtering the independent inertia-gravity-wave motions. In bounded domains, boundary buoyancy or equivalent pressure data are additional indispensable inputs.
For the Boussinesq approximation, subtract the resting background buoyancy and denote its perturbation by . With constant nonzero and constant , the leading geostrophic flow and hydrostatic balance define the quasi-geostrophic streamfunction
The leading horizontal flow is nondivergent. At the next order, its relative vertical vorticity is stretched by the small vertical velocity, while the background buoyancy is advected vertically. Thus the curl and buoyancy equations give
These follow from with and , retaining the geostrophic advection of the first-order anomalies. Vertical advection of those anomalies is of higher quasi-geostrophic order.
Differentiate the buoyancy equation in . It is important not to assume without justification that commutes with . Their commutator on is
by hydrostatic balance and thermal wind. Hence . Adding times this equation to the vorticity equation eliminates , yielding
This is the quasi-geostrophic potential-vorticity equation on an -plane. The additive makes equal to the first-order normalized Ertel PV of total buoyancy ; using a PV anomaly instead removes that constant and does not change the dynamics.
For stretched coordinates for quasi-geostrophic inversion, put
Then , and the potential-vorticity relation becomes
Stable stratification makes this operator elliptic. Uniform and nonzero are essential to this simple constant-coefficient stretching.
Let be absolute vorticity, where is constant. Let be density and a materially conserved stratifying scalar, so . For the incompressible density-stratified ideal fluid one may choose the advected density itself; in a thermodynamic description one may use an entropy-like scalar with . The Rossby–Ertel potential vorticity is
Ertel's theorem states that it is conserved following a parcel under inviscid, adiabatic motion with conservative body force and the stated stratifying-scalar condition.
Start from the rotating momentum equation
Here includes gravity and any conservative centrifugal potential. Taking its curl gives
Mass conservation is , specializing to here. Combining these equations yields
Differentiating the material conservation of gives . Dotting these two equations, the velocity-gradient terms cancel after relabelling their indices. Therefore
If , the triple product vanishes immediately. More generally, an equation of state makes a linear combination of and , so it also vanishes. Hence
This proves the conservation law and specifies why must be a suitable stratifying scalar: an arbitrary unrelated passive tracer need not annihilate the baroclinic triple product. No viscosity or scalar diffusion is permitted in this theorem.
For disturbances varying only along the imposed magnetic field, set and . The steady horizontal-field magnetoconvection dispersion relation becomes
Expand it in powers of :
Its derivative and second derivative are
Because diverges as and , the unique minimum is determined by
For large Chandrasekhar number, this equation first gives and hence the requested strong-field steady magnetoconvection varying along the field selection law:
For the threshold through order unity, the leading contribution at its optimum is . More precisely, the stationary equation gives
The correction to has no first-order contribution because that expression is already stationary at its leading minimizer. Also and . Therefore
The constant term must be retained. This restricted family bends magnetic field lines, so its large stationary threshold is compatible with the unrestricted field-aligned minimum in the preceding part.
Set in the horizontal-field magnetoconvection dispersion relation. With positive and nonzero , cancellation gives the stationary neutral curve
At fixed , the Chandrasekhar number contributes a nonnegative penalty proportional to . It can be eliminated by choosing . It remains to minimize for :
The function diverges at both endpoints and has its unique minimum at . Thus the magnetic-field-aligned rolls evade steady magnetic inhibition:
independently of . If higher vertical sine modes are included, replacing by gives minimum , so the displayed first vertical mode also gives the smallest steady threshold.
Physically, these convection rolls have axes along the imposed magnetic field. Their perturbations are independent of , so in the resistive induction equation and no growing magnetic perturbation is generated. The flow does not bend the field; consequently magnetic tension cannot inhibit these rolls, however large the field strength. This conclusion concerns the requested steady disturbances.
Put and . The plane-layer poloidal-toroidal decomposition supplies the assumed poloidal fields as
Since and , potentials proportional to have the required vertical components. Their horizontal components are proportional to , satisfying the stress-free boundary conditions and the horizontal-field boundary conditions. The double-curl representation automatically enforces incompressibility and the solenoidal magnetic-field constraint.
Let be the amplitudes of . The temperature and resistive induction equations immediately give
Eliminate the total-pressure perturbation by applying to the vertical momentum equation and subtracting times its divergence. The resulting vertical equation is
In particular, shows explicitly that magnetic tension opposes the displacement.
Taking the determinant of these three amplitude equations gives the horizontal-field magnetoconvection dispersion relation:
This cubic polynomial includes all roots of the assumed poloidal coupled system; using its determinant form avoids discarding possible roots by dividing by or . As a check, factors off magnetic diffusion and leaves the standard stress-free Rayleigh-Bénard convection growth equation.
Let be the reference mass density, the kinematic viscosity, the thermal diffusivity, the magnetic diffusivity, and the coefficient of thermal expansion. The conductive state of Rayleigh-Bénard convection is . For the Boussinesq approximation, density variation is retained only in buoyancy. Linearizing about this state and the imposed magnetic field gives
Here and is the perturbation of magnetohydrodynamic total pressure. The gradient part of the Lorentz force has been absorbed into ; the remaining term is magnetic tension. The sign in the temperature equation follows from .
Use the thermal-diffusion scaling of a convection layer: length , time , velocity , temperature perturbation , field perturbation , and total-pressure perturbation . Dropping dimensionless-variable decorations gives
with
These are respectively the Rayleigh number, Chandrasekhar number, Prandtl number, and magnetic-to-thermal diffusivity ratio. In particular, the magnetic coefficient is , not alone, in these thermal-time units. At , the boundary conditions are , , and .
There is a minor operator misprint to resolve first. Interpreting as composition, the Cartesian formula for the angular Laplacian is
The last term is missing from the printed Cartesian expression. For example, its truncated expression maps to , whereas a degree-one spherical harmonic must have angular eigenvalue two. In what follows, use the stated angular spectrum and the supplied poloidal-energy identity; these are consistent with the corrected operator.
The divergence theorem and the solenoidal magnetic-field constraint imply zero magnetic flux through every sphere. Consequently has zero angular mean and no component. Expand in orthonormal spherical harmonics:
By angular orthogonality, with
the gradient norm and the supplied poloidal-toroidal decomposition identity become
Since , this proves the poloidal magnetic energy bound by the radial scalar gradient:
Equality holds when the radial scalar contains only degree-one angular components.
Define the poloidal and total magnetic energies by and . Combining the radial-flow dynamo energy bound with gives the necessary condition
It has the same temporal interpretation as the bound in the preceding part; statistically steady versions use the corresponding time-averaged energies. It quantifies why dynamo action with a substantial poloidal fraction requires radial motion, while a purely tangential flow has .
Set , , , and . The confined flow satisfies the impermeability condition , so at . Multiplying the radial magnetic induction scalar equation by and integrating, the advection term vanishes by the divergence theorem:
The same integration by parts, using , gives
For diffusion, Green's first identity in the sphere gives . In the exterior, and the normal on its inner boundary is , so
The infinity term vanishes for the isolated decaying field. The insulating boundary condition for the radial magnetic scalar permits matching the two traces, and therefore the exterior contribution is essential: it turns the diffusive term into . Altogether,
Applying the pointwise Cauchy-Schwarz inequality and then its integral version,
Thus a nonzero field with stationary or growing must satisfy the radial-flow dynamo energy bound:
The temporal qualification matters. For general time-dependent dynamo action, nondecay does not make at every instant; the boxed bound applies at nondecreasing instants, to a marginal or growing mode, or in an appropriate long-time sense. A uniform strict violation, with , gives . The whole-space Sobolev inequality and Holder inequality give , forcing exponential decay of . Alternatively, for a bounded statistically steady field, time averaging the energy balance and applying Cauchy-Schwarz once more gives , where . Sustained dynamo action cannot have a uniform negative dissipation gap.
Write for the material derivative. The resistive induction equation, together with the solenoidal conditions on both fields, is
Since , the product rule gives
Also . Substitution proves the radial magnetic induction scalar equation:
In the insulating exterior the quasistatic magnetic field is current-free, so and . Thus and for , with decay at infinity for an isolated field. This is an instantaneous exterior Laplace equation, rather than a diffusion equation with the interior value of .
Use the usual nonmagnetic-interface assumptions: equal magnetic permeability on both sides and no surface current. The electromagnetic boundary conditions then make and the tangential magnetic field continuous. Hence is continuous. In spherical coordinates, the solenoidal magnetic-field constraint reads
where the last term is the angular divergence on the unit sphere. Its right-hand side is also continuous, giving the insulating boundary condition for the radial magnetic scalar:
Equivalently, the decaying exterior degree- spherical harmonic is proportional to , so its boundary amplitude satisfies .
First consider a genuinely one-dimensional, time-independent collisionless stellar system with Hamiltonian . Choose . For bound vertical oscillations, a phase-mixed population has equal occupations of the upward and downward branches of each orbit. By Jeans theorem, its stationary distribution is a function of the conserved vertical energy, . Equivalently, the one-dimensional Collisionless Boltzmann equation makes constant along the energy curves. Branch-dependent incoming and outgoing populations or time-dependent waves would not satisfy this assumption.
Integrate both signs of and change variable to :
The density is thus an Abel transform of the vertical-energy distribution. To invert it without simply quoting an inversion rule, apply a second integral and exchange its order:
The inner integral is , as follows by setting . Writing before differentiating avoids an artificial infinite endpoint term. Under sufficient differentiability and decay,
The vertical-energy Abel inversion of a stellar distribution is therefore
This proves the normalization, including the factor from the two velocity signs. The additive origin of merely changes the origin of energy.
For this expression to define a physical phase-space distribution function, must be expressible as a single-valued function of , the integrals and differentiated integral must converge, and the resulting must be nonnegative. Reflection symmetry and a potential increasing with provide the usual single-valued relation on either side of the disk. A sufficiently smooth decreasing is a sufficient condition for nonnegativity; it is not asserted to be necessary for every positive energy distribution. If there is a finite escape energy, replace the infinite limits by that energy and impose the appropriate cutoff and boundary conditions. The displayed infinite-limit formula presumes either a confining potential or a distribution extended by zero above its allowed energy, with no omitted boundary population.
A three-dimensional galactic disk does not automatically meet these hypotheses. Exact separation makes an integral of motion. If the full galactic distribution function factorizes into an in-plane factor and a vertical factor , integrating the in-plane velocities gives the required one-dimensional distribution after its normalization is absorbed into . More generally the vertical marginal must depend only on in the sample being analysed. Near the solar radius, approximate separation can be useful when the sampled heights and radial excursions are small relative to the scales over which the vertical force changes with . If only a slowly varying vertical action is conserved, replacing it by one fixed requires an additional controlled local approximation.
The population must be sufficiently stationary and phase mixed, with negligible mean vertical flow, and the data must measure a well-defined tracer population with a known selection function. Radial coupling and the tilted velocity ellipsoid must be negligible or modelled. In the full vertical Jeans equation, that coupling is ; it cannot generally be discarded merely because a mixed moment vanishes at the midplane. The tracer number density is not the mass density producing the potential.
To infer the local mass, measure the tracer density as a function of height and its vertical velocity distribution near the midplane. With , the latter directly samples . Insert that measured distribution into the forward integral for , and match it to the observed to infer . Equivalently, for trial potentials compute away from the plane, apply the inversion, and require agreement with the measured velocities. Density data alone do not determine both an unknown potential and an unknown energy distribution.
Once the vertical force is known, use the full axisymmetric Poisson equation for Newtonian gravity, rather than identifying every vertical derivative with density in isolation:
At the midplane, , so
In terms of the circular-orbit Oort constants, and , the radial term equals . It vanishes for a locally flat rotation curve, not for an arbitrary rotating disk. An integrated version gives the dynamical surface density from vertical stellar motions:
Here the actual vertical acceleration is . The sign of the radial correction follows directly from the Poisson equation for Newtonian gravity.
For an illustrative isothermal tracer with constant vertical velocity dispersion , take
The velocity integral gives , hence . For a locally flat rotation curve this yields
This example shows explicitly how a measured tracer scale and velocity scale constrain the gravitating density; using the tracer's own density as the mass source would instead impose an unjustified self-gravitating model.
The inferred density includes luminous and faint stars, gas and dark matter. Comparing it with an independently estimated baryonic census tests for extra gravitating mass. An excess need not be a dark disk: a dark matter halo also contributes to the local force. Conversely, agreement with the baryonic density locally does not exclude a halo at other radii or heights. Vertical disequilibrium, radial mixing, errors in selection or tracer populations, and neglected velocity tilt can mimic a mass discrepancy, so the one-dimensional equilibrium assumptions must be tested when interpreting such an inference.
In an axisymmetric cylindrical coordinate system, the steady Collisionless Boltzmann equation is
Let and . Multiply by and integrate over velocities. The spatial terms give . Integration by parts in supplies , and the derivative supplies . The force term vanishes because does not depend on . This assumes sufficient decay of the galactic distribution function to discard all velocity boundary terms. The radial Jeans equation is consequently
Reflection symmetry about makes even and odd. At the midplane the latter vanishes, and . Multiplying by proves
All quadratic velocities here are population moments, not individual stellar velocities. In particular, symmetry does not make the midplane tilt contribution to asymmetric drift disappear: an odd mixed moment can have a nonzero derivative at zero.
For application to the Milky Way, assume negligible mean radial and vertical flows, and define the circular speed by . Write and . Rearranging gives the exact stress-support relation
Thus the stellar asymmetric drift is the right-hand side divided by . For , this denominator is approximately . If and locally, the bracket becomes , making the density and dispersion-gradient contributions explicit.
A radially declining random-motion stress supplies some of the force needed to support a galactic disk, so its stars need less ordered azimuthal motion than a population on circular orbits. Hotter, often older, stellar populations therefore generally rotate more slowly than cold populations in the same gravitational potential; this is the observed stellar asymmetric drift. It is a stress-support effect, not a frictional slowing of each orbit. For a velocity ellipsoid aligned approximately with spherical coordinates, , and the midplane tilt term contributes rather than zero.
Local measurements of mean rotation and all components of the velocity dispersion, combined with tracer-density and dispersion gradients, can therefore constrain and the radial Newtonian gravitational field. A hotter sample's mean rotation must not be identified directly with the circular speed. The tracer number density need not be the gravitating mass density. Nonaxisymmetric streaming, a nonstationary disk, poorly measured radial gradients, or a neglected tilt term can bias this inference; these are assumptions of the derivation rather than extra free corrections to the circular force.
Write for the gravitational parameter of the relative Kepler orbit, and use specific orbital energy and momenta per unit reduced mass. The Hamiltonian is
If physical momenta rather than these specific momenta are used, multiply the actions by the reduced mass. This only introduces a constant factor into the phase space measure and leaves the eccentricity fractions unchanged. The formulas in the question adopt the specific-action convention.
Here is an explicit local canonical transformation. A separated complete integral of the Hamilton-Jacobi equation is
Choose branches along an orbit and take , , , . Then
whose exterior derivative proves preservation of the canonical symplectic form. Thus these variables are canonical, and the absolute Jacobian determinant is one. The angular separation gives and , including the sign of the angular momentum along the reference axis.
For clarity, the radial action can be evaluated rather than assumed. Let , with the eccentric anomaly. Then , and
In the integral, use and . The polar action is , while the signed azimuthal action is . The separated angular coordinates have the usual Delaunay variables interpretation: is the argument of periapsis, and is the longitude of ascending node. In particular,
with a suitable origin at periapsis, so is the mean anomaly. We have therefore recovered
not merely assigned names to the new coordinates.
For nondegenerate bound Kepler orbits, the ranges are
The boundaries describe circular, coplanar or radial degeneracies, where some angles cease to be defined; they have zero measure in the present calculation. The actions are canonical coordinates with nested bounds, rather than three independently unrestricted Cartesian coordinates. The square of alone would miss the distinction between prograde and retrograde inclinations.
By the canonical transformation, the population measure becomes
At fixed , the condition is . Integrating all three angles and then gives
Consequently the Delaunay phase-volume proof of the thermal eccentricity distribution yields
The PDF's dependence must be interpreted as a cumulative distribution function, not an eccentricity probability density function or the value of the original six-dimensional phase-space distribution function. A finite value of at every energy also does not suffice to make the total population finite: on all bound energies gives the divergent integral . The fractions are well defined at each fixed energy, over a finite allowed energy range, or for an energy distribution with a finite total integral.
A Boltzmann distribution is therefore unnecessary. Any normalizable energy-only distribution has the same eccentricity marginal, although such a distribution is a collisionless steady state by Jeans theorem. The marginal alone does not even prove stationarity: for ,
is a positive time-dependent solution of the Collisionless Boltzmann equation and has exactly the same eccentricity marginal after integration over . An observed cumulative law establishes neither thermal relaxation nor the age of the system or Universe.
A local stellar relaxation time depends on the number density of scatterers. Calling a total number, as the PDF does, leaves the displayed expression dimensionally wrong: has units of time per volume. The intended local expression must use , or for a homogeneous sample of volume . We shall also make the normalization of the stellar relaxation time explicit, since an unspecified representative one-dimensional velocity dispersion does not fix an exact numerical coefficient.
In a small-angle gravitational encounter, approximate the relative trajectory by a straight line of speed and impact parameter . The perpendicular acceleration of one star due to the other is . Its impulse is therefore
A star encounters scatterers per unit time in this interval of impact parameters. Independent deflections have random directions, so their variances add as in a random walk. Hence the accumulated squared velocity change has rate
The Coulomb logarithm in stellar dynamics arises because each logarithmic interval of impact parameter contributes equally. The lower cutoff is approximately the strong-deflection scale, for equal masses, or the physical collision scale if larger. The upper cutoff is a scale on which the local density and straight-line encounter approximation cease to apply, such as the local disk thickness. Thus is dimensionless; it is not a number density or an arbitrary dimensional argument of a logarithm.
To display the normalization issue, use the representative relative speed and define by . This gives
Choosing recovers precisely the printed coefficient after repairing to :
This is an explicitly defined convention, not a uniquely derivable normalization from the supplied data. If instead relaxation means a mean-square change equal to the full initial random-speed variance, , the same encounter approximation gives . Averaging the encounter speed distribution instead of using one representative changes the coefficient again. The robust result is the scaling .
For a transparent solar-neighbourhood estimate, take , , and . With , one obtains , , and
These illustrative parameters give an order -- year stellar relaxation time, much longer than a galactic lifetime of order years. The solar neighbourhood is consequently a collisionless stellar system with respect to encounters between individual stars. Scattering by massive clouds and collective structure is a different process; the estimate does not assert that every mechanism of disk heating is negligible.
The numerical fractions describe physically very different components. Use so that pressure and energy density have the same units. The stress-energy conservation equation for a homogeneous component, together with its equation of state , gives
Nonrelativistic baryons and cold dark matter have and dilute as ; radiation has and dilutes as ; vacuum energy has and remains constant. The curvature term scales as in the Friedmann equation but is a geometric contribution, not an additional material fluid.
There is consequently a coincidence in the present mixture. Normalize . Then
At early times vacuum is negligible, while at late times it dominates overwhelmingly. Observing order-unity matter and vacuum fractions during their comparatively recent crossover motivates the cosmic coincidence problem: why should this crossover occur near our observing epoch?
The absolute scale gives a second puzzle. Restoring SI units, yields
Its energy density is . Quantum vacuum contributions associated with ordinary particle-physics scales can be far larger than this observed value. Explaining the tiny net value, including cancellations among contributions, is the cosmological constant problem. The required negative pressure also differs qualitatively from ordinary dilute matter.
The matter budget supplies another explanatory gap: only is baryonic, while must be nonbaryonic matter in this benchmark. Together with in vacuum energy, most of the cosmic density is in components whose microscopic explanation is not supplied by fitting their fractions. Finally, near-zero curvature raises the flatness problem. For nonzero ,
During radiation domination , so ; during matter domination , so . Near-flatness today therefore requires extremely small early curvature in an unmodified decelerating history. Cosmic inflation offers a mechanism that reduces this curvature fraction through accelerated expansion.
The apparent contrivances are the recent matter-vacuum coincidence, the tiny vacuum-energy scale, the near-flat initial geometry and the unexplained microscopic dark components. Their observationally inferred values impose concrete requirements on a deeper physical account.

Pinned article: Introduction to the OurBigBook Project

Welcome to the OurBigBook Project! Our goal is to create the perfect publishing platform for STEM subjects, and get university-level students to write the best free STEM tutorials ever.
Everyone is welcome to create an account and play with the site: ourbigbook.com/go/register. We belive that students themselves can write amazing tutorials, but teachers are welcome too. You can write about anything you want, it doesn't have to be STEM or even educational. Silly test content is very welcome and you won't be penalized in any way. Just keep it legal!
We have two killer features:
  1. topics: topics group articles by different users with the same title, e.g. here is the topic for the "Fundamental Theorem of Calculus" ourbigbook.com/go/topic/fundamental-theorem-of-calculus
    Articles of different users are sorted by upvote within each article page. This feature is a bit like:
    • a Wikipedia where each user can have their own version of each article
    • a Q&A website like Stack Overflow, where multiple people can give their views on a given topic, and the best ones are sorted by upvote. Except you don't need to wait for someone to ask first, and any topic goes, no matter how narrow or broad
    This feature makes it possible for readers to find better explanations of any topic created by other writers. And it allows writers to create an explanation in a place that readers might actually find it.
    Figure 1.
    Screenshot of the "Derivative" topic page
    . View it live at: ourbigbook.com/go/topic/derivative
  2. local editing: you can store all your personal knowledge base content locally in a plaintext markup format that can be edited locally and published either:
    This way you can be sure that even if OurBigBook.com were to go down one day (which we have no plans to do as it is quite cheap to host!), your content will still be perfectly readable as a static site.
    Figure 5. . You can also edit articles on the Web editor without installing anything locally.
    Video 3.
    Edit locally and publish demo
    . Source. This shows editing OurBigBook Markup and publishing it using the Visual Studio Code extension.
  3. https://raw.githubusercontent.com/ourbigbook/ourbigbook-media/master/feature/x/hilbert-space-arrow.png
  4. Infinitely deep tables of contents:
    Figure 6.
    Dynamic article tree with infinitely deep table of contents
    .
    Descendant pages can also show up as toplevel e.g.: ourbigbook.com/cirosantilli/chordate-subclade
All our software is open source and hosted at: github.com/ourbigbook/ourbigbook
Further documentation can be found at: docs.ourbigbook.com
Feel free to reach our to us for any help or suggestions: docs.ourbigbook.com/#contact