Thermodynamic cycle Created 2026-09-24 Updated 2026-11-05
A thermodynamic cycle returns a working substance to its initial thermodynamic state. Every state function, including internal energy, has zero net change over the complete cycle. With heat entering and work done by the substance taken positive, the first law of thermodynamics gives .
For a quasistatic simple compressible system, is the signed area enclosed in its pressure-volume diagram. Clockwise traversal gives positive net expansion work in the usual axes, while reversed traversal changes the sign. A heat engine accepts heat at higher temperature and rejects some at lower temperature; a refrigerator uses work to reverse that transfer. Returning the working substance to its initial state does not require its reservoirs or surroundings to return to theirs. A cycle can therefore produce net entropy even though the substance's net entropy change is zero.
Thermodynamic entropy flux Created 2026-10-14 Updated 2026-10-20
Local equilibrium associates the outgoing heat flux with outgoing entropy flux at positive temperature . Its divergence appears in the Lagrangian entropy inequality, with the appropriate nominal flux in reference coordinates.
Thermodynamic equilibrium 2026-10-14
A thermodynamic system is in thermodynamic equilibrium when its macroscopic state has no spontaneous tendency to change through any exchange allowed by its constraints. For an isolated system, stable thermodynamic equilibrium maximizes entropy over the accessible states at fixed total energy and conserved material inventories. A wall can forbid an exchange, so always specify what can cross or move. Thermal, mechanical and chemical conditions answer different questions about that same constrained state. [ref]
For example, two compartments separated by a rigid, impermeable wall that transmits heat can reach thermal equilibrium while retaining different pressures and compositions. Allowing an unloaded piston to move adds a mechanical equilibrium condition. Allowing one chemical species to cross adds chemical potential equality for particle exchange; allowing a chemical reaction adds its chemical equilibrium condition. A fixed barrier can therefore support a constrained thermodynamic equilibrium that ceases to be an equilibrium when the barrier is removed.
Uniformity is not the definition of thermodynamic equilibrium. An isothermal atmosphere in hydrostatic equilibrium can have a common temperature while its pressure and mass density vary with height: the pressure gradient balances gravity. In an external field, the exchange condition must include the relevant potential energy; for charged matter this leads to the electrochemical potential. Relativistic gravitational corrections to thermal equilibrium are described separately by the Tolman temperature law.
A steady state only says that the macroscopic description is constant in time. A bar maintained between hot and cold thermal reservoirs has steady heat flux and produces entropy, so it is not in thermodynamic equilibrium. Even matching temperatures at one perfect-contact interface can coexist with heat transfer through the surrounding material; matching those two local values does not establish equilibrium of the whole apparatus. See thermal conduction for that spatial transport problem.
The useful simplification is that equilibrium conditions predict an endpoint without computing every collision or flow during relaxation. The first law of thermodynamics supplies the conserved quantities, and the Second law of thermodynamics supplies the direction of change. For a system held at fixed temperature and volume, the corresponding criterion is minimization of Helmholtz free energy; at fixed temperature and pressure, it is minimization of Gibbs free energy, with the material and exchange constraints still imposed.
Thermodynamic free energy Created 2026-10-14 Updated 2026-10-18
A free energy is a thermodynamic potential that compares possible states under specified environmental constraints. For a closed system of fixed composition, treated as a simple compressible system with only pressure-volume work, stable thermodynamic equilibrium minimizes Helmholtz free energy at fixed temperature and volume, or Gibbs free energy at fixed temperature and pressure. The choice follows the experiment: a rigid sealed vessel and a sealed cylinder with a freely moving loaded piston impose different constraints. Both may exchange heat with a thermal reservoir. See W. C. Carter, MIT thermodynamics notes, sections 2-1.14 and 2-1.19.
Choose Helmholtz free energy for fixed temperature and volume, or Gibbs free energy for fixed temperature and pressure
. Original schematic of two closed vessels in contact with a thermal reservoir. Composition is fixed, and only pressure-volume work is allowed. The right piston permits the volume to change. Details.The useful insight is that internal energy alone cannot rank these alternatives: exchanging heat also changes the surroundings' entropy. Subtracting packages that accounting into a property of the chosen system. Adding additionally accounts for displacing the surroundings at fixed pressure. A free energy is a state function; supplied heat describes a transfer during a process. Under the stated constraints, supplied heat is at fixed volume or at fixed pressure, whereas neither nor generally equals .
A lower free energy identifies a thermodynamic preference, without specifying a timescale. A barrier can trap a system in a local minimum, producing metastability although a lower global minimum exists. The enzyme example illustrates the corresponding distinction for chemical reactions: changing the route can change the reaction rate while preserving the endpoint Gibbs free energy difference and chemical equilibrium.
Thermodynamics Created 2026-09-24 Updated 2026-10-13
Thermodynamics studies energy transfers and the constraints on macroscopic changes. Its vocabulary connects internal energy, entropy, temperature, pressure and volume to heat and work. The first law of thermodynamics balances energy; the Second law of thermodynamics decides which changes can occur spontaneously and limits how much work a heat engine can deliver. These principles let us bound performance before choosing a material or a detailed machine design. Applications include power generation, propulsion and refrigerators. [ref]
https://web.mit.edu/16.unified/www/FALL/thermodynamics/notes/node10.html. MIT, What thermodynamics describes
Start by choosing a system boundary. A closed system can exchange energy but no matter; an isolated system exchanges neither. A state function, such as internal energy or entropy, depends on the equilibrium state. A process specifies how that state changes. Thus a body's temperature is a property it has, whereas heat records energy crossing its boundary during a process. A body contains internal energy, rather than a stored quantity of heat.
Two insulated bodies initially at different positive temperatures approach thermal equilibrium when brought into thermal contact. Their combined energy is conserved, but their combined entropy increases. They do not spontaneously separate again into a hotter body and a colder one. This familiar asymmetry makes thermodynamics interesting: conserving energy leaves many imaginable changes available, and entropy supplies a further constraint. The same distinction underlies both entropy maximization under thermal contact and the thermal efficiency limit in Carnot's theorem.
Primary-paper scan: www.appliedpolymertechnology.org/uploads/1/0/8/8/108867241/jchemphys_10_51.pdf
Thermodynamic stability Created 2026-10-18 Updated 2026-11-05
Thermodynamic stability means that allowed small perturbations do not lower the appropriate thermodynamic potential from an equilibrium state. The constraints select that potential: an isolated system maximizes entropy, a system at fixed temperature and volume minimizes Helmholtz free energy, and one at fixed temperature and pressure minimizes Gibbs free energy.
For an unconstrained scalar order parameter , a stationary state has , and positive curvature gives local stability. A distant lower minimum can still make it metastable rather than globally stable. In an ordinary additive fluid, positive isothermal compressibility expresses resistance to density perturbations: increasing pressure should reduce volume. Loss of the corresponding curvature can mark a spinodal. These statements depend on the ensemble and permitted perturbations; mechanical equilibrium alone does not establish thermal, chemical or global stability.
Thermoelasticity with a temperature-dependent constraint Created 2026-10-14 Updated 2026-11-05
The admissible rates obey . A reaction multiplier in the reversible nominal stress tensor therefore has an accompanying specific entropy contribution:Their reaction contributions cancel in the Clausius-Duhem inequality on admissible rates. Omitting the entropy term would generally violate the constraint's power balance.
Thermoelastic Maxwell relation for a stretched band Created 2026-10-20 Updated 2026-10-31
Let be reversible work supplied to stretch a band. Its Helmholtz free energy obeys . Equality of mixed derivatives gives the displayed relation. An entropy decrease on stretching therefore corresponds to increasing tensile force on heating at fixed extension. The sign follows the force/work convention; a restoring force exerted by the band has the opposite sign.
Thermoelectric cooler energy balance 2026-10-18
The chosen steady-state model isHere is the terminal voltage drop along positive electric current through the module. Its Seebeck effect term opposes the cooling supply. The cold Peltier effect term removes heat; Joule heating and returning heat conduction reduce the available cooling. At zero electric current, : the passive leak warms c and removes heat from h, consistent with the stated signs. Subtracting the two face equations cancels heat conduction and gives the electrical power, an independent conservation of energy check.
The factor one half is an ideal-model result, not a universal rule for every contact. To see its origin, let run from cold to hot along a uniform equivalent leg of length , cross-sectional area , electrical resistivity and thermal conductivity . With constant coefficients, insulated sides and no Thomson effect, steady conservation of energy givesThe Fourier's law heat current in the positive direction is . At it equals , and at it equals , using and . Adding the local transported heat current gives the two face equations. Summing equivalent legs preserves this accounting. Nonuniform material properties, side losses or asymmetric contact dissipation require a revised model.
For an original toy module, stipulate , , , and . At ,The coefficient of performance is defined here only for refrigeration with and . The hot-side assembly must remove , not just the extracted . These are stipulated calculations, not measurements or a commercial module specification.
At the same fixed face temperatures but , the same boundary definitions give , , and . The formerly cold face is now heated; the formerly hot reservoir supplies . Still . Reversal changes the linear terms, while and the leak at fixed temperatures remain unchanged. Holding the old labels fixed makes this check meaningful.
The corresponding steady entropy production of the module is the outgoing reservoir entropy minus the incoming reservoir entropy:The Peltier effect terms cancel because they carry the same entropy at each end. This cancellation explains the reversible coupling; it does not make finite-resistance operation reversible. In the toy example the two positive contributions are approximately and , giving for either current direction. In cooling operation, combining this inequality with the energy balance gives the Carnot refrigerator limit , equal to for these reservoir temperatures. A coefficient of performance above one would describe transported heat per electrical work, not the creation of energy.
Third law of thermodynamics Created 2026-09-24 Updated 2026-11-05
The third law of thermodynamics constrains equilibrium entropy as absolute temperature approaches zero. For a system with a unique ground state and an appropriate equilibrium limit, the thermal population concentrates in that state and . This explains why a classical fixed equipartition contribution cannot persist unchanged down to zero temperature in an ordinary quantum material.
Ground-state state degeneracy matters. A finite system with equally populated ground states instead has residual entropy in that ensemble; extensive degeneracy or failure to equilibrate needs careful separate treatment. Ordinary equilibrium heat capacities tend to zero in the standard third-law regime, because fewer excitations remain thermally accessible. The related unattainability formulation says that absolute zero cannot be reached by a finite sequence of physical cooling operations under its assumptions. It should not be confused with the false claim that all microscopic motion must disappear at zero temperature.
Time integrability of an entropy-dissipation product Created 2026-10-06 Updated 2026-11-05
If finite nonnegative entropy is locally absolutely continuous and decreases, its limit exists. The fundamental theorem of calculus applied to proves the displayed absolute-integrability identity. This product conclusion does not require a zero limiting entropy.
Torsional strain 2026-11-05
Torsional strain is an increase in the energy of a molecule associated with an unfavourable torsion angle, relative to a stated reference conformation. Rotation about a bond can change the relative orientations of substituents without changing which atoms are bonded. The IUPAC definition of strain explicitly includes unfavourable dihedral angles alongside bond-length and bond-angle distortions.[ref]
Compendium of Chemical Terminology (Gold Book), second edition. Strain, entry S06037, DOI10.1351/goldbook.S06037
Consider ethane viewed along its central carbon–carbon bond. An eclipsed conformation aligns projected carbon–hydrogen bonds, whereas a staggered conformation places them between one another. An idealized threefold potential energy model iswith chosen eclipsed. It gives and : a finite rotational barrier separates equivalent minima. The model is a teaching parametrization; must be obtained independently rather than read from the drawing.
The 1937 paper by J. D. Kemp and K. S. Pitzer explicitly connected the entropy of ethane and the third law of thermodynamics with hindered methyl-group rotation.[ref]
The Entropy of Ethane and the Third Law of Thermodynamics. Hindered Rotation of Methyl Groups by J. D. Kemp and Kenneth S. Pitzer. Verified original title, JACS59, pp.276–279
This historical connection shows why internal rotation is a measurable molecular degree of freedom, not simply unrestricted motion around a single bond. In a ring, geometric closure can restrict accessible torsion angles; ring strain can therefore include torsional strain as well as other contributions. Assigning a separate torsional energy is model-dependent, rather than a complete account of every electronic interaction. Translational entropy Created 2026-10-20 Updated 2026-11-05
Translational partition function Created 2026-10-20 Updated 2026-11-05
For a free molecule of mass in a large three-dimensional volume , replacing the translational state sum by an integral gives the displayed partition function. For identical classical molecules the many-molecule canonical partition function is , not simply . Differentiating its Helmholtz free energy at fixed volume gives the ideal-gas translational entropy.
Triple point Created 2026-10-14 Updated 2026-10-20
A triple point is a temperature–pressure pair at which three distinct bulk thermodynamic phases of a one-component substance coexist in thermodynamic equilibrium. In the familiar solid–liquid–gas case, their three phase coexistence curves meet. Other combinations, such as two crystal polymorphs and a liquid, also qualify: “triple” counts thermodynamic phases, rather than states-of-matter categories.
For the same substance, the chemical potential in each thermodynamic phase must agree:There are two independent equality conditions for two controls, temperature and pressure. Generically they select an isolated pair ; the third pairwise equality follows from the first two. Equivalently, the phase rule gives . This counts independent intensive controls, not phase fractions: changing the amounts of the three thermodynamic phases need not change the ideal bulk temperature and pressure, provided all three remain present. Different sets of crystal polymorphs can give different triple points for the same substance.[ref]
Gibbs Phase Rule (MIT 10.213 course material). Gibbs Phase Rule, three-phase count and pressure–temperature diagram discussion
At a liquid-gas critical point, the two fluid thermodynamic phases instead merge, and their mass density difference and latent heat vanish. It is the endpoint of the liquid–gas phase coexistence curve, rather than a meeting of three distinct thermodynamic phases. The regular independent-equality count used for a triple point cannot explain this merger. A triple point can retain finite mass density and entropy differences between all three thermodynamic phases.[ref]
Statistical Physics by David Tong. §5.1.2, printed p. 141: vanishing liquid–gas discontinuity at the critical point; Figure 41 separates it from the three-phase junction
Two-fluid model of superfluidity 2026-10-18
The two-fluid model of superfluidity gives the normal component of a superfluid and the superfluid independent velocities.
An elementary uniform-flow example makes the distinction operational. Write the mass flux per unit area and the ideal entropy flux asHere is specific entropy, in , and are response mass densities. The mass density used here gives the three-dimensional phase stiffness coefficient when is substituted into the kinetic energy density . For a stipulated , and along a channel, zero net mass flux requires . Yet is positive. Opposing velocities can therefore transport entropy while transporting no net mass.
This example explains why excellent apparent heat transport need not be ordinary diffusion of heat through a stationary liquid. In the ideal zero-net-mass-flux limit, the heat flux associated with this entropy transport is . Viscous losses, quantum vortices and external heat exchange require additional terms. The model also supports second sound.
Two-level paramagnetic cooling model Created 2026-10-18 Updated 2026-10-20
Use the independent spin-one-half two-level system with fixed distinguishable sites and Hamiltonian levels , where is the magnitude of the field-axis magnetic moment and is a uniform externally controlled magnetic field. Assume positive temperature, no interactions between sites, and no appreciable lattice or load entropy. The two levels differ by . With inverse temperature , the canonical ensemble gives the one-site and total partition functionsHere the minus subscript denotes the lower energy . Factorization of the partition function requires additive energy and independent sites; there is no particle-exchange factor for these fixed distinguishable sites.
Differentiate the partition function, holding fixed when differentiating with respect to . The internal energy, Helmholtz free energy, total field-axis magnetic moment , and magnetic entropy areThe extensive moment is distinct from magnetization, the moment per unit volume. Direct substitution of into the Gibbs entropy gives the same independently of the free-energy derivative.
At fixed , the magnetic heat capacity isStrict decrease makes invertible on . Constant magnetic entropy therefore fixes , not or separately:The partition function may be used to label these equilibrium states even though the isolated cooling leg has no external heat bath. Actual thermalization of the lattice and load additionally requires a sufficiently fast spin-lattice relaxation; perfectly uncoupled spins by themselves cannot refrigerate an attached object.
The limiting cases are instructive. For , , , and . The moment response reproduces Curie's law. For , and the upper-state occupation is exponentially small. Taking at fixed gives ; taking at fixed gives . The origin has a path-dependent limit. Extrapolating a line of constant to does not construct a usable zero-temperature state or prove that a real material retains independent degenerate spins there.
Two-qubit entropy from the reduced determinant Created 2026-10-20 Updated 2026-11-05
For a unit-trace two-dimensional reduced state of a bipartite pure state, determinant gives eigenvalues . Their binary entropy quantifies entanglement. Natural logarithms give a maximum ; base-two logarithms give one bit.
Take a closed system consisting of one mole of a classical monatomic gas, idealized as an ideal gas with constant heat capacity at constant volume . Stipulate amount of substance and molar gas constant for this calculation. Set initial temperature and volume , and define and . The specified equilibrium endpoints areThus has volume , temperature and pressure . The fixed material inventory and ideal gas law make these complete endpoint specifications for this model. All numbers below are calculated values, rather than measurements of a particular gas.
Use a frictionless piston, ignore bulk mechanical energy changes, and allow only pressure-volume work. Each step is the limit of a reversible thermodynamic process: adjust loads by infinitesimal pressure differences, and supply heat through infinitesimal temperature differences. Heating with changing temperature requires a succession of matching thermal reservoirs; contact with a single hotter heat bath would give an irreversible finite difference. On a fixed-volume leg the piston is locked. These assumptions justify using the actual equilibrium path's pressure inAn endpoint chord is not the path; substituting a guessed straight line would compute a different thermodynamic process.[ref]
Thermodynamics and Propulsion. Thermodynamics and Propulsion, §1.3.3, Figures 1.10–1.11: external pressure versus equilibrium gas pressure in boundary work
The upper route heats at fixed volume from to , then undergoes isothermal expansion at to . The lower route undergoes isothermal expansion at from to , then heats at fixed volume to . The tuples use the same ordering as the endpoints. Vertical legs do zero expansion work, and the two curved legs have different pressures at every shared intermediate volume.
Two reversible ideal gas paths connect the same equilibrium endpoints
. Original idealized pressure-volume diagram. The upper route is and the lower route is ; the shaded gap is the difference in work, not an experimental uncertainty. Both are reversible thermodynamic processes under the stated piston and thermal reservoir assumptions. Details.The internal energy of an ideal gas gives the same endpoint difference for both routes:On either fixed-volume heating leg, and . On each isothermal expansion, , so the first law of thermodynamics gives . The ideal gas law and the integral of then giveHere is the natural logarithm. Rounded to , the upper route has and the lower route has . Subtracting separately rounded entries can differ by ; the unrounded balances are exact in the stipulated model.
The shaded area between the curves explains the entire difference:Following the upper route forward and the lower route backward makes a thermodynamic cycle with this positive net work and matching net heat. Its internal energy change is zero. The two open routes themselves are reversible, so their different work outputs should not be mistaken for a loss caused by entropy production: they receive different heat transfers at different temperatures.
Two other state functions provide independent endpoint checks. With enthalpy in this model,To obtain the entropy change along either route, integrate on its heating leg, giving , and on its isothermal expansion, giving . Reordering the legs changes their heat totals but leaves the sum of their entropy changes unchanged. In particular, neither route's total divided by its final temperature equals , and neither total equals : both routes include an isothermal expansion, rather than a single fixed-pressure heating step.


