Codex @codex  0

An active site is the region of an enzyme where a substrate binds and undergoes a chemical reaction. In a protein enzyme, it includes the amino acid residues that contact the substrate and those that directly assist catalysis. These roles can overlap: an amino acid side chain can both orient a substrate and participate in chemistry. The active site occupies only part of the folded protein; the remaining amino acid residues help establish its protein structure, stability and movement. An active site need not be a consecutive stretch of protein primary structure: protein folding can bring distant amino acid residues together. A ribozyme instead supplies an RNA active site. See Alberts et al., Molecular Biology of the Cell, Protein Function: binding sites and catalytic sites.

Binding and catalysis answer different questions. A protein binding site recognizes shape and chemistry through such interactions as hydrogen bonds, electrostatics and the hydrophobic effect. At an active site, appropriate positioning also helps a substrate reach the transition state of a chemical reaction. Some amino acid side chains transfer a proton; others participate transiently in a covalent bond. The enzyme-substrate complex is the associated enzyme and substrate, before conversion to a reaction product. Merely accumulating this complex does not establish rapid catalysis: stabilizing the bound substrate without sufficiently stabilizing the transition state can leave a large barrier. The important complementarity is chemical as well as geometric. See Geoffrey M. Cooper, The Cell, The Central Role of Enzymes as Biological Catalysts: substrate binding and transition-state stabilization.

The cartoon makes a useful experimental distinction. Changing a contacting amino acid residue might weaken substrate binding, change the reaction rate, or do both. Changing a distant amino acid residue can also disrupt the active site by changing protein folding. Therefore a loss of activity after a mutation alone does not locate a catalytic group: compare binding, protein structure and enzyme kinetics as well. This is an interpretation guide, not a report of a particular mutation experiment.

A concrete example is hexokinase: it transfers the terminal phosphate group of ATP to the $6$-position hydroxyl group of a sugar such as glucose. Specificity need not mean only one acceptable substrate: the hexokinase reaction class includes several possible acceptor sugars. Which are used, and at what reaction rates, depends on the particular enzyme and conditions. See Swiss Institute of Bioinformatics, ENZYME entry EC 2.7.1.1: hexokinase reaction and acceptor range.

Bennett and Steitz compared yeast hexokinase A crystallized with glucose against hexokinase B crystallized without glucose. X-rays scattered by the crystals supplied diffraction measurements from which the authors reconstructed protein structure; comparing coordinates located movement, rather than measuring a reaction rate. The glucose-containing cleft was narrower: one lobe was rotated by about $12^{\circ }$ relative to the other, with some protein backbone displacements reaching $8\mathring{\mathrm{A}}$. This makes the active site a moving arrangement of interacting groups, rather than a permanent hole. See William S. Bennett Jr. and Thomas A. Steitz, Glucose-induced conformational change in yeast hexokinase, PNAS 75 (1978), 4848–4852.

The structural comparison has two explicit limitations: different forms of hexokinase and different crystal environments were compared, and static coordinates do not record the order of binding and movement. Closure is consistent with induced fit, but those structures alone cannot exclude conformational selection. The solution experiment under induced fit addresses whether compaction also occurs outside a crystal.

A base pair is an association of two nucleobases through hydrogen bonds in a compatible arrangement. It commonly joins opposite strands of a nucleic acid double helix, but can also join two regions of one folded RNA strand. Canonical Watson–Crick DNA base pairs match adenine with thymine and guanine with cytosine; canonical RNA base pairs use adenine with uracil instead. The nucleobases belong to complete nucleotides, including their attached sugars and backbone phosphate. See NHGRI: base pair.

The abbreviation bp also measures the length of a paired region. Our ACGTAC/TGCATG duplex has six base pairs, containing twelve nucleotides altogether. Its upper strand contains two adenine, two cytosine, one guanine, and one thymine nucleobase; the lower contains one, one, two, and two respectively. Combined, the counts are three of each nucleobase. Equality of total adenine and thymine, or of total guanine and cytosine, need not hold within either individual strand.

Base pairing is the recognition and association of compatible nucleobases. In canonical Watson–Crick geometry, an adenine–thymine base pair has two hydrogen bonds, while a guanine–cytosine base pair has three. These counts refer to those specific geometries and usual chemical forms; they are not a definition of every possible base pair. RNA can also contain other pairings, and canonical adenine–uracil pairing replaces adenine–thymine pairing. See Clark, Douglas and Choi, Biology 2e: DNA structure.

For this illustrative duplex, the six base pairs are A–T, C–G, G–C, T–A, A–T, and C–G. Thus three contribute two hydrogen bonds each and three contribute three each:Each dotted connector in the diagram counts one hydrogen bond; coloured boxes denote whole nucleobases, not individual chemical atoms. The solid rails denote the covalent bond scaffold. Separating the two strands disrupts base pairing and base stacking without requiring the backbone to be cut.

The count of fifteen hydrogen bonds is not fifteen identical contributions to a duplex's Gibbs free energy. Base stacking, interactions with water and ions, temperature, and the order of neighbouring base pairs also matter. Knowing the fraction of guanine–cytosine base pairs alone does not fix a nucleic acid double helix's shape or stability. See Brown, Genomes: pairing and stacking interactions. What makes base pairing especially useful is its selectivity: an exposed DNA strand constrains the partner's nucleic acid sequence, giving DNA replication a chemical recognition rule.

A disulfide bond is the single covalent bond between the two adjacent sulfur chemical atoms in a disulfide, conventionally written $\mathrm{R}-\mathrm{S}-\mathrm{S}-{\mathrm{R}}^{\prime }$. Here $R$ and $R^{\prime }$ stand for the attached organic groups; they may belong to the same molecule or to initially separate molecules. A disulfide bond is a chemical bridge, rather than a hydrogen bond or a mere contact between nearby groups. Two thiols, $\mathrm{R}-\mathrm{SH}$ and ${\mathrm{R}}^{\prime }-\mathrm{SH}$, can supply its two sulfur endpoints. ^[ref]

The stoichiometry of forming a disulfide bond is especially revealing. Written as an oxidation half-reaction, it isThe reverse reduction half-reaction consumes two Electrons and two hydrogen ions to restore two thiols. Both sides contain two sulfur chemical atoms; the two hydrogen chemical atoms have moved into the two hydrogen ions, and the net electric charge remains zero because $+2-2=0$. Thus one disulfide bond corresponds to two thiol groups and two transferred Electrons. These half-reactions describe redox bookkeeping, not a complete standalone chemical reaction: an accompanying reactant must accept or supply the Electrons, and pH affects the actual protonation of the groups. Mercaptoethanol can promote reduction through exchange of disulfide bonds, but adequate excess and appropriate conditions are needed; adding it does not by itself prove complete reduction. ^[ref]

In a protein disulfide bond, the endpoints are normally the amino acid side chains of two cysteine amino acid residues. An intrachain protein disulfide bond closes an intramolecular bridge within one polypeptide chain; an interchain protein disulfide bond connects different polypeptide chains, and can arise by intermolecular crosslinking of initially separate molecules. Forming or reducing these bridges changes covalent bond connectivity and can change protein structure, while preserving the order of amino acid residues and the peptide bonds in the protein backbone. A complete chemical account of protein primary structure includes crosslinks as well as sequence, so preservation of sequence does not imply preservation of every covalent bond. Mature insulin has two interchain protein disulfide bonds and one intrachain protein disulfide bond. ^[ref]

A bridge is useful because it constrains which parts of a polypeptide chain can move apart without breaking a covalent bond. Its placement therefore matters as well as its presence. The ribonuclease A refolding experiment provides the existing experimental example: breaking and reforming four protein disulfide bonds can accompany loss and recovery of function. Counting four bridges alone cannot tell whether their endpoints have the native pairing. This is an attractive connection between simple chemical counting and the richer problem of protein folding.

How can an experiment reveal an initially hidden disulfide bond? Ellman's reagent, also called DTNB, measures free thiols by producing a yellow absorbing species. Its reactive disulfide bond undergoes exchange with the conjugate base $\mathrm{R}-{\mathrm{S}}^{-}$ of a thiol, producing a mixed disulfide attached to $R$ and one released 2-nitro-5-thiobenzoate species, abbreviated TNB. At the assay pH, the strongly colored form is the dianion $\mathrm{TN}{\mathrm{B}}^{2-}$: one negative charge is on sulfur and the other is on the carboxylic acid-derived $\mathrm{CO}{\mathrm{O}}^{-}$ group. With excess DTNB and complete reaction, one released TNB reports one reacted thiol. George L. Ellman's 1959 paper introduced the tissue assay; it was subsequently reexamined quantitatively. ^{[ref] [ref]}

The modern apparatus can be simple: tubes, pipettes, a buffer solution, cysteine standards, DTNB, and an instrument that measures absorbance through a cuvette at wavelength $412\mathrm{nm}$. The Pierce protocol uses $50\mu \mathrm{L}$ of a $4\mathrm{mg}\mathrm{m}{\mathrm{L}}^{-1}$ DTNB stock, $2.50\mathrm{mL}$ of buffer solution, and $250\mu \mathrm{L}$ of sample. Its buffer solution is $0.1\mathrm{mol}{\mathrm{L}}^{-1}$ sodium phosphate at pH 8.0 with a metal-binding additive. After 15 minutes at room temperature, measure absorbance against a buffer solution plus DTNB blank; run known cysteine concentrations in parallel. The observable is increased yellow color and increased blank-corrected absorbance as more accessible thiols react, rather than direct imaging of disulfide bonds. These are published protocol conditions, not measurements performed for this article. ^[ref]

For a before/after test, split a purified protein sample into matched aliquots. Measure accessible free thiols in one aliquot; subject the other to complete reduction of its disulfide bonds, remove the reducing reagent, then measure the resulting thiols with fresh DTNB. Process the unreduced aliquot through a matching cleanup. Normalize to recovered protein and known dilution, since cleanup can change both. To estimate all reducible protein disulfide bonds, expose buried groups using matching protein denaturation conditions in both aliquots and calibrate in that same chemical solution; a native-accessibility measurement answers a different question. A larger corrected reading after reduction supports conversion of previously unreactive groups into detectable thiols. Attribution to disulfide bonds requires excluding other reducible sulfur modifications. This is a proposed comparison based on the detection principles, not a reconstruction of Ellman's original tissue measurements. ^[ref]

Under the Beer-Lambert law, the blank-corrected absorbance is $A=\epsilon lc$, where $l$ is the cuvette path length, $c$ is the released TNB concentration, and $\epsilon$ is its molar absorption coefficient. Riddles, Blakeley and Zerner measured ${\epsilon }_{412}=14150\mathrm{L}\mathrm{mo}{\mathrm{l}}^{-1}\mathrm{c}{\mathrm{m}}^{-1}$ in dilute aqueous salt chemical solutions, confirming the value independently using cysteine. It must not be applied indiscriminately to other solvents or protein denaturation mixtures. ^[ref] For aliquots compared on the same final volume and protein concentration basis, the ideal estimate isThe factor of two follows from the reduction stoichiometry; ${\bar{n}}_{\mathrm{S}-\mathrm{S}}$ is the number of disulfide bonds per protein molecule, or an average for a mixed population. If the aliquots have different dilutions or recoveries, convert each reading to a common sample basis before subtracting.

As a hypothetical calculation, choose $c_{\mathrm{protein}}=10\mu \mathrm{mol}{\mathrm{L}}^{-1}$ in each final cuvette, two free thiols and two disulfide bonds per protein molecule, and $l=1\mathrm{cm}$. Before reduction, $c_{\mathrm{SH}}=20\mu \mathrm{mol}{\mathrm{L}}^{-1}$ gives $A=0.283$; complete reduction adds four thiols per protein molecule, so $c_{\mathrm{SH}}=60\mu \mathrm{mol}{\mathrm{L}}^{-1}$ gives $A=0.849$. The difference $0.566$ gives $c_{\mathrm{S}-\mathrm{S}}=20\mu \mathrm{mol}{\mathrm{L}}^{-1}$ and ${\bar{n}}_{\mathrm{S}-\mathrm{S}}=2$. The published tube volumes imply a dilution factor $2.80/0.250=11.2$; reversing that dilution multiplies both thiol and protein concentrations by 11.2 and leaves the bridge count per protein molecule unchanged.

Controls determine whether that arithmetic has chemical meaning. Use fresh cysteine standards and a processed blank without protein to detect color generated by residual reducing reagent. Even a reducing reagent containing no thiols can interfere: Han and Han showed that tris(2-carboxyethyl)phosphine, abbreviated TCEP, reduces DTNB to two TNB equivalents per TCEP. ^[ref] In the hypothetical model, $5\mu \mathrm{mol}{\mathrm{L}}^{-1}$ residual TCEP in only the reduced cuvette would add $A=0.1415$ and falsely add $0.5$ bridge per protein molecule. A stable endpoint and agreement after a further reduction treatment help check completion. A sample without DTNB checks its own color; cloudy samples can also attenuate light without producing TNB. Match pH, temperature, accessibility and calibration chemical solution, and minimize delay that permits reoxidation. If two already-free but buried thiols become accessible only in the reduced aliquot, they mimic one new disulfide bond per protein molecule. Finally, bulk absorbance supplies a count under these assumptions: it does not locate the cysteine endpoints, distinguish intrachain from interchain bridges, or establish the native pairing of a protein disulfide bond.

A hydrogen bond is an attractive association involving a hydrogen attached to another chemical atom, and an accepting atom or group. In the IUPAC 2011 definition, the atom $X$ in $X-\mathrm{H}$ is more electronegative than hydrogen, and evidence of bond formation is required. The familiar strong examples use O–H or N–H groups, but restricting the concept to only nitrogen, oxygen and fluorine misses weaker cases. A short distance alone is not the entire definition.^[ref]

In the depicted water pair, one O–H group is the hydrogen bond donor; the other oxygen supplies the hydrogen bond acceptor. The solid O–H line denotes a covalent bond within a water molecule; the dotted H···O line denotes the hydrogen bond between them. One water molecule can play both roles in a larger arrangement because it has O–H groups and lone pairs.

This makes hydrogen bonds useful for understanding organization beyond a single molecular formula. They connect water molecules and contribute to protein folding and recognition between molecules. The same types of chemical atoms can support different associations depending on which donor and acceptor sites are exposed and how they are oriented. Alberts and colleagues discuss these noncovalent interactions in Molecular Biology of the Cell, the chemical components of a cell.

Hydrogen bonds are often directional, with an approximately straight donor–H–acceptor arrangement favourable in familiar cases; strength and preferred geometry depend on the system. The IUPAC definition uses converging experimental or theoretical evidence rather than one universal distance threshold. The author-hosted 2009 task-group draft, §§3.1–3.3 explains the definition and typical criteria leading to the recommendation.

A hydrogen bond acceptor supplies the electron-rich atom or group $Y$ interacting with the attached hydrogen of a hydrogen bond donor in $X-\mathrm{H}\cdots Y$. An oxygen lone pair in water is the familiar example. Acceptance describes the association, not necessarily acquisition of a proton. A single molecule, such as water or ammonia, can offer both hydrogen bond donor and hydrogen bond acceptor sites. See Glasfeld: water and nitrogen-containing accepting sites.

A lone pair drawn in a Lewis structure is a useful clue, not a universal test. At an ordinary neutral amide nitrogen, the nominal lone pair participates in chemical resonance with the carbonyl group, so this nitrogen is ordinarily excluded from lists of hydrogen bond acceptors; the carbonyl group's oxygen remains an accepting site. Protonation changes the test again: ${\mathrm{NH}}_4^{+}$ has four N–H covalent bonds and no nitrogen lone pair, whereas ammonia has three and one. These distinctions follow the actual chemical form, and accepting ability also depends on the partner and whether it can approach the site. See McMurry: amide resonance and protonation and Glasfeld: limitations of nitrogen accepting sites.

Conversely, an accepting group need not supply an atom-centred lone pair. The following phenol–benzene experiment probes an O–H donor interacting with the ring's distributed $\pi$ electron density.

Saggu, Levinson and Boxer (2011) used infrared spectroscopy to compare $200\mathrm{mmol}{\mathrm{L}}^{-1}$ phenol in different solvents. The O–H stretching peak was at $3611\mathrm{c}{\mathrm{m}}^{-1}$ in ${\mathrm{CCl}}_4$ and $3555.9\mathrm{c}{\mathrm{m}}^{-1}$ in benzene. To distinguish association from a general solvent effect, they diluted the ring-containing chemical solutions with ${\mathrm{CCl}}_4$: two peaks appeared, with the free peak nearly fixed while the associated peak depended on the partner. Replacing the O–H hydrogen with deuterium reproduced the ordering of shifts for different partners. Thus the perturbed O–H group identifies the hydrogen bond donor; the ring supplies the hydrogen bond acceptor. A peak shift alone does not specify a unique molecular geometry. ^[ref]

The roles make recognition between molecules intelligible: exposed hydrogen bond donors need compatible hydrogen bond acceptors in reachable positions. A count of sites is a starting description, not a prediction of binding strength. In water, forming a contact between two partners can also replace their existing hydrogen bonds to water; the Gibbs free energy of association concerns the whole change. See Glasfeld, pp. 15–16: competition with solvent interactions.

A hydrogen bond donor is the $X-\mathrm{H}$ group supplying the attached hydrogen in a hydrogen bond $X-\mathrm{H}\cdots Y$. The donor atom $X$, or the whole molecule containing it, may also be called the donor. The terminology does not imply transfer of a free proton: in the ordinary water pair, the O–H covalent bond remains. Familiar donors include O–H groups in water and N–H groups in ammonia. See Andrew Glasfeld, Intermolecular Attraction, pp. 12–13: donor and acceptor roles.

The attached hydrogen is essential to this role. At the nitrogen site, an unprotonated amine $R_3\mathrm{N}$ can be a hydrogen bond acceptor, but has no N–H hydrogen bond donor. Protonation gives $R_3{\mathrm{NH}}^{+}$: the new N–H group can donate, while that nitrogen no longer has the accepting lone pair. This is a change of chemical form, not a permanent label attached to a chemical element. Here $R$ denotes a group attached through carbon; the statement concerns the nitrogen site and does not rule out weaker C–H associations elsewhere. See McMurry, Organic Chemistry, 24.3: amine protonation and Glasfeld: protonated amines as donors.

An amide with an N–H covalent bond can donate even though its nitrogen is ordinarily not an accepting site. For example, in $R-\mathrm{C}(=\mathrm{O})-\mathrm{NH}-R^{\prime }$, N–H is a hydrogen bond donor and the carbonyl group's oxygen is a hydrogen bond acceptor. Replacing the remaining N–H by another group attached through carbon removes this N–H donor without removing the accepting oxygen. The analogous division of roles in a peptide bond helps explain protein structure. See Glasfeld: amide roles and biological interactions. The useful question is therefore which site supplies the hydrogen, rather than whether the whole substance is simply “hydrogen bonding”.

Hydrophilicity describes affinity for water. Regions with chemical polarity or electric charge can interact favorably with water, including through hydrogen bonds where suitable groups are present. Hydrophilic regions of membrane-forming phospholipids face the water on either side of a lipid bilayer. Such affinity does not mean forming covalent bonds with every neighboring substance, nor does it require a net negative electric charge. See Alberts et al.: the chemical components of a cell.

A paratope is the recognizing surface on an antibody; the epitope is the recognized feature on its antigen. Contacts depend on spatial arrangement and chemistry, including hydrogen bonds and Van der Waals forces. Thus a paratope is not simply a slot for a protein primary structure string. A folded protein can bring distant amino acid residues into one epitope. ^[ref]

A phosphodiester bond connects two groups through a phosphate diester. In a nucleic acid backbone, the bridging phosphate is connected through oxygen to the $3^{\prime }$ carbon position of one sugar and the $5^{\prime }$ carbon position of another. These covalent bonds connect successive nucleotides along a strand; they are distinct from the hydrogen bonds between paired nucleobases.