Efficient convection keeps the interior at nearly uniform specific entropy. For the fully ionized monatomic gas, the heat capacity ratio is , so the adiabatic process gives , with spatially constant. The ideal gas relation then implies
The constant is spatial, not temporal: loss of specific entropy during contraction changes it. This is a stellar polytrope with polytropic index . We neglect radiation pressure and take the thin photosphere as an atmospheric matching layer rather than a significant fraction of the stellar mass.
For a fixed dimensionless profile of the Lane-Emden equation, the stellar homology relations have the form
where are positive dimensionless structure constants. More explicitly, write and with and fixed dimensionless profiles. Mass conservation gives . Integrating the hydrostatic pressure support equation, with negligible surface pressure on the interior scale, gives . Both integrals are fixed positive numbers, proving the two central scalings. Substituting these relations into gives
Thus the same polytropic index fixes throughout this homologous sequence, while the dimensional stellar polytrope constant changes.
At the photosphere, whose optical depth is , identify the temperature with the effective temperature . The ideal gas relation and the interior adiabat give . With the prescribed opacity and stellar surface boundary condition,
Eliminating therefore proves
Using the Stefan–Boltzmann law, with , gives the luminosity
The gravitational energy of a stellar polytrope is for . The stellar virial theorem for a monatomic gas gives , and hence the total energy is . With no appreciable stellar nuclear fusion or accretion, energy conservation gives
Combining the two expressions for yields
Multiplication by and integration proves the contraction law with density-linear fourth-power stellar opacity:
When the accumulated contraction term dominates the initial-radius term, . Substitution into the central ideal gas relation gives
which has the stated behavior when the time origin is negligible. This late-time approximation still requires the assumed fully convective star, fixed composition and opacity law to remain applicable.
The event rate counts unordered pairs of reacting nuclei. For unlike species there are pairs per unit-volume normalization; for identical species there are approximately pairs, since counting ordered pairs counts each collision twice. The Kronecker delta therefore supplies exactly the required divisor . It is the event rate, not the destruction rate of identical nuclei: one identical-pair reaction destroys two nuclei.
The temperature dependence combines the high-energy tail of the Maxwell-Boltzmann distribution with quantum tunnelling through the Coulomb barrier. The principal exponential factor in the energy integral is . Its stationary point, the Gamow peak, has and exponent . Integrating around this peak gives a prefactor proportional to , or , when the nuclear factor varies slowly. Thus the supplied thermonuclear reaction rate is locally proportional to . The slow weak interaction in the proton-proton reaction also makes its overall coefficient very small; its local thermal slope follows the supplied formula.
At fixed number densities, define the local temperature exponent of a thermonuclear reaction by a logarithmic derivative. Since ,
For proton-proton reactions, and . At , and . For two helium-3 nuclei, and , giving and . For helium-3 with helium-4, and the same charge product gives and . Hence
These are local powers near the specified temperature, not constant exponents over an arbitrarily large range. The greater reduced nuclear mass in the reaction increases its tunnelling exponent and its thermal sensitivity.
For the effective proton-proton reaction network, denote the event rates by
The short-lived beryllium intermediate can be eliminated, so production through feeds , representing predominantly lithium-7. This rapid conversion is electron capture. Count the nuclei consumed and produced in each reaction: consumes two protons and makes one deuterium; consumes a proton and a deuterium and makes one helium-3; consumes two helium-3 and makes one helium-4 and two protons; consumes one of each helium isotope; consumes a proton and lithium-7 and makes two helium-4. It follows that
For closure, . These nuclear terms conserve , providing an independent stoichiometric check. They describe a fixed local volume; compression or mixing would add transport terms.
The roughly one-second destruction time of deuterium is negligible compared with the proton-burning and helium-3 evolution times. Its abundance rapidly adjusts to the slowly evolving production rate. Set , giving the deuterium quasi-equilibrium in proton-proton burning
Substitution, without setting , gives
The helium-3 relaxation time of about years is likewise short compared with the central proton-burning time and the age of the Sun. On this relaxation time the proton and helium-4 abundances, and the background temperature, can be treated as fixed. Put , , . Then , and its nonnegative equilibrium is
The other root is negative and unphysical. Write and subtract the equilibrium equation. Exactly, for a fixed background,
Dropping the quadratic displacement gives
Thus small displacements decay exponentially. A slowly moving equilibrium introduces an additional term, negligible to leading order when is short compared with background evolution.
To estimate the temperature for helium-3 freeze-out, use the cooler pp-I-dominated region and neglect compared with . Then and . With the local powers just obtained and fixed proton number density, and . Adopting gives
This is an order-of-magnitude extrapolation of local exponents. Keeping the supplied exponential factors gives the helium-3 freeze-out estimate with Gamow factors
which yields about with the same normalization and fixed-density approximation. Thus the robust estimate is several million kelvin. The supplied data do not fix the local density, composition or pp-II fraction away from the centre, so they cannot determine an exact transition temperature or radius. In particular, using alone would omit the temperature dependence of the equilibrium helium-3 abundance.
The solar hydrogen and helium-3 abundance profiles follow from burning, finite equilibration time and convection. Central hydrogen has been consumed, so is lowest in the centre and increases toward its much less processed outer value. In the hot centre, rapid destruction keeps helium-3 small. Moving outward initially raises its equilibrium abundance because rises strongly as temperature falls. Further out, equilibration is no longer reached within the solar age, and still farther out even production is slow. Hence has an off-centre maximum and then declines toward its small outer abundance. The outer convective envelope mixes each abundance toward a constant value.
Figure 1.
Present solar hydrogen depletion and the off-centre helium-3 abundance maximum
. Details.
The sketch shows these qualitative shapes; the helium-3 ordinate is scaled to its own maximum. The illustrated amplitudes, peak radius and envelope boundary are schematic, not a numerical solar-model solution.
A solar-type main sequence star has a radiative interior and an outer convection zone. Rotating convection and differential rotation continually regenerate its magnetic field by dynamo action. The field is therefore not simply an initially stored field undergoing passive magnetic diffusion. In an alpha-Omega dynamo, the Omega effect winds a poloidal magnetic field into a toroidal magnetic field, while the alpha effect associated with helical motions can regenerate poloidal flux. In a solar dynamo, the Babcock-Leighton mechanism provides another poloidal source through the emergence and dispersal of tilted active regions. Shear near the tachocline and transport through the convection zone help organize the cycle; no single dynamo model is needed to claim that rotation and convection are essential ingredients.
Rotation acts on convective motions through the Coriolis force, altering their correlations and helicity. A useful activity measure is the stellar activity Rossby number, , where is a convective turnover time. At a given stellar structure, faster rotation ordinarily increases rotational influence and produces greater magnetic activity in the unsaturated regime. Young solar-type main sequence stars commonly rotate rapidly and show strong sunspots, flares, and chromospheric and coronal emission, although their initial rotation rates have substantial scatter. Very rapid rotators enter a saturated regime, so activity does not increase without limit as rotation increases. The saturation mechanism is not uniquely fixed by the correlation itself. The observed unsaturated correlation and saturated regime are documented in primary rotation–activity measurements.
The reverse interaction is wind-driven magnetic braking of a solar-type star. An ionized stellar wind is coupled to the star's open magnetic field. Matter carries angular momentum, and the Maxwell stress tensor also transmits a torque. Magnetic coupling provides an effective lever arm comparable to the Alfvén radius, rather than only the stellar radius. Writing for the outward mass-loss rate, a schematic angular-momentum equation is
where a geometry factor can be absorbed into an effective . This lever-arm interpretation follows from the angular-momentum invariant of a magnetized wind; it is the central result of the original magnetized solar-wind calculation. Magnetic braking can be effective despite a small mass-loss rate, because can greatly exceed the stellar radius.
One can derive the familiar rotation-age scaling in a simple unsaturated model. For a radial open field, take , , and . Eliminating gives
If the unsaturated large-scale field satisfies and the other factors vary slowly, this gives with positive K. Approximating I as constant on this part of the main sequence, integration yields
Thus in the late-time part of this approximation. This Skumanich rotation law captures the classic observed secular decline of rotation and magnetic activity; its observational basis is the original rotation and chromospheric-emission analysis. It is a scaling model, not an exact trajectory for every star. With a saturated field, the same simplified wind model instead gives a torque approximately proportional to , so initially rapid rotation can decay more nearly exponentially until the unsaturated regime is reached.
Over the main sequence lifetime, wind loss therefore generally makes the star rotate more slowly, increases its stellar activity Rossby number, and reduces its unsaturated mean activity. Later changes of moment of inertia, wind properties and open-field topology alter the simple power law. Internal transport of angular momentum can also feed the braked envelope from the radiative interior, so surface rotation is not automatically a measure of the entire star's angular momentum. In a star with weak braking, this secular history differs from the ideal cubic-torque model; an age law alone is not a fundamental dynamo equation.
The stellar rotation-activity feedback also acts on shorter time scales. A growing magnetic field exerts a Lorentz force that changes differential rotation and convective motions, extracting kinetic energy and limiting further growth through dynamo quenching. Conversely, varying shear and poloidal regeneration change the magnetic cycle. The present solar-like regime can sustain repeated solar cycles, with polarity reversals and activity modulation superposed on the much slower rotational evolution. Rotation promotes dynamo activity; dynamo-generated fields brake rotation through the wind and react back on the motions that generate them. This coupled feedback explains the broad progression from young, rapidly rotating, strongly active stars toward older, more slowly rotating, less active solar-type stars, while allowing cycles, irregular modulation and different initial histories.
Buoyancy and the convective criterion. Consider a small fluid parcel displaced outward by . Assume that sound waves keep its pressure equal to the ambient pressure, while heat exchange is slow enough that its displacement is an adiabatic process. Composition is uniform, so the parcel and its surroundings have the same mean molecular weight. For an ideal gas, , and an adiabatic parcel obeys . If is the pressure change on moving outward, then
The density excess of the parcel at its new location is therefore
If , this excess is negative: the outward-displaced parcel is lighter and accelerates farther outward. A downward displacement similarly continues downward. Conversely, a smaller gradient gives a restoring buoyancy force. The Schwarzschild criterion is thus stability for and instability for , where the adiabatic temperature gradient is . For a monatomic gas,
A composition gradient would require the additional density effect in the Ledoux criterion; it is absent in this calculation.
Opacity and pressure. The supplied opacity is characteristic of a cool hydrogen-rich stellar atmosphere dominated by negative hydrogen ion opacity. Mostly neutral hydrogen can attach electrons supplied by partially ionized metals; bound-free and free-free absorption involving the resulting ions produces a steep positive temperature dependence. The weak density dependence and strong temperature sensitivity can be represented by local power-law fits. At fixed composition the given pressure form is equivalent to , because . This is an approximate fit over the relevant cool-atmosphere regime, not an exact opacity law at all temperatures; molecular opacity or hydrogen ionization eventually changes the regime.
For a geometrically thin atmosphere take the surface gravity of a star to be constant, . Combining with gives hydrostatic equilibrium in optical depth,
The grey atmosphere relation gives . With negligible external pressure, , integration yields
An imposed nonzero external pressure would add ; the boundary assumption is what fixes the integration constant here.
The factor in parentheses is . Hence
The grey-atmosphere convection onset with eighth-power temperature opacity occurs when this reaches , so
The radiative continuation below this boundary would be unstable. Efficient convection instead keeps the deeper star approximately adiabatic.
Matching to the convective interior. Write . Eliminating density using the ideal gas law gives
at fixed composition. Since is a fixed number, the matching temperature is proportional to , while the matching pressure satisfies . Consequently
The polytropic mass-radius relation for index gives . Raising the matching relation to the ninth power and using therefore gives
Finally the Stefan–Boltzmann law yields the Hayashi relation with eighth-power temperature opacity,
Composition and the opacity normalization are fixed in this comparison. The entropy coefficient is spatially constant in each convective model, but need not be the same for stars with different masses or radii.
The magnetic vector potential gives the upper poloidal magnetic field , and is its toroidal magnetic field; play the same roles below. This representation automatically satisfies . Diffusion acts in both regions. Above the interface the alpha effect converts toroidal magnetic field into poloidal magnetic field, while below it a mean shear converts the poloidal component into toroidal magnetic field. Separating these source regions still allows an alpha-Omega dynamo through diffusion across the interface.
For electromagnetic matching, keep the closure actually represented by these equations. Its retained turbulent mean-field electromotive force is above and zero below: only toroidal-to-poloidal alpha generation is retained. Let the mean velocity be , continuous at the interface, and write the mean electric field as
This yields the specified scalar equations with above and below. In particular, the upper tangential electric component is
where is the scalar toroidal-field amplitude. The other tangential component is .
Assume equal permeability, no imposed singular surface current and ordinary electromagnetic matching. Continuity of the normal magnetic field gives , and tangential magnetic continuity gives and . For the nonzero horizontal Fourier wavenumber used below, normal-field continuity is equivalent to ; the spatially constant potential difference is a gauge freedom. Continuity of , with continuous and , gives the final condition. Thus electromagnetic matching for an alpha-Omega interface is
Continuity of follows from and their time evolution, rather than supplying a fifth independent amplitude condition. A full isotropic mean-field electromotive force would add toroidal alpha induction and an alpha contribution to ; that would be a different bulk and interface problem. Retaining it only in a boundary condition would be inconsistent with the equations being solved here.
Set , without loss of generality for a real wave and its conjugate, and write . Define the two complex vertical wavenumbers and so the upper fields decay as and the lower fields as . The original PDF has a lowercase in the lower phase. The homogeneous upper and lower equations give
Both and have positive real part. Since their squares agree, they must be equal, rather than opposite. Put
so and follow from the equations rather than being assumed in advance.
Suppress the common factor and write
The identity gives the upper forcing equation, while the same operator on gives . Hence
The first and third interface dynamo matching give , . The derivative conditions then give
Thus and . Eliminating the nonzero amplitudes produces the dispersion relation of an equal-diffusivity interface dynamo:
In terms of ,
Each branch has a square root with positive real part and is therefore compatible with vertical localization. The branch with the plus sign is the potentially growing one:
The minus branch has . At the first branch is neutrally oscillatory. The frequency sign follows from the stated convention: positive give propagation in the negative direction. Reversing the coupling sign reverses propagation, while the threshold for the conjugate sign depends on the magnitude of the dynamo number.
Figure 1.
Separated interface-dynamo source layers and the growth threshold at dynamo number 32
. Details.
The equal-diffusivity interface dynamo idealizes a solar configuration in which helical convection regenerates poloidal magnetic field above the tachocline and differential rotation generates strong toroidal magnetic field in or below it. Diffusion communicates the fields between the two regions, closing the feedback loop. This separation is the mechanism emphasized by Parker's interface-wave model. An oscillatory traveling mode gives migrating magnetic patterns and polarity reversals; buoyant toroidal flux can appear as sunspot belts. If is a local latitude coordinate, the direction of their migration depends on the alpha–shear sign and the coordinate orientation.
The magnetic period of this branch is ; polarity reverses after half a period, and activity that depends on field strength rather than sign can repeat on that half-period. This is the qualitative relation between the magnetic solar cycle and its activity cycle. The model does not itself predict the observed period or guarantee equatorward migration: those require actual geometry, transport coefficients and shear signs. Real stars also have diffusivity contrasts, meridional transport, spatially varying regeneration and nonlinear feedback. The kinematic exponential mode describes onset, while saturation and a maintained finite-amplitude cycle require further physics.
For the Schwarzschild criterion, displace a small gas parcel upwards. Assume its composition is unchanged, it remains in pressure balance with its surroundings, and it moves quickly enough that heat exchange is negligible. The parcel obeys the adiabatic equation of state . Combining this with the ideal gas equation gives , so its adiabatic temperature gradient is .
Let the surrounding temperature gradient be . For an upward displacement , the parcel's temperature relative to its new surroundings is
If , this is negative: the parcel is cooler and, at equal pressure and composition, denser than its surroundings. It therefore sinks back; a downward displacement likewise gives a restoring buoyancy force. If the inequality is reversed, the displaced parcel continues to rise. The stability condition is thus
Equality is the neutral boundary. There is no composition-gradient term because the ideal-gas parcel and the background have the same mean molecular weight.
In the thin upper stellar atmosphere, take a plane-parallel approximation with constant , optical depth increasing inward, and zero overlying pressure . Hydrostatic equilibrium in optical depth gives . The ideal gas equation converts the stipulated opacity into
Define , so the given grey atmosphere relation is . Integrating from the surface gives
This proves the required pressure law. In particular times a function only of and .
For the grey-atmosphere convection onset with density-linear opacity, differentiate the two profiles to obtain the radiative temperature gradient:
It increases monotonically from zero, since , and first reaches the adiabatic temperature gradient at . Therefore
Below this point the radiative stratification is unstable and convection must transport some of the outward energy flux.
At the outer convection boundary, depends only on , so and for fixed . The matching constant in is . Consequently
This temperature form of the polytropic relation follows from an ideal monatomic adiabat; its is not the density-polytrope coefficient in Question 3.
For the deep radiative boundary beneath a power-law-opacity convective envelope, negligible envelope mass and absent local energy generation give and . Divide the radiative temperature equation by the pressure equation to get the stellar radiative temperature gradient
This is the gradient that would be needed if radiation alone carried , and it is the quantity to compare with even while the actual region is convective. The deeper Kramers' opacity law gives . Substituting yields
As rises inward this decreases, so the transition back to a stable radiative interior is at
Thus . Using the outer matching and the Stefan–Boltzmann law,
The mass and radius cancel. Hence, at fixed opacity coefficients and composition,
This uses the same adiabat through the convection zone and distinguishes its inner transition temperature from its outer onset temperature.
Magnetoconvection is the competition between thermally driven convection and the force and transport of a conducting fluid's magnetic field. An imposed magnetic field resists motions that bend its field lines through magnetic tension, while magnetic diffusion permits slippage. The competition changes the onset threshold, preferred spatial scale, temporal behaviour and finite-amplitude organization. The geometry matters: a disturbance nearly invariant along a horizontal imposed magnetic field can avoid much of its tension, whereas an impermeable layer with a vertical imposed magnetic field cannot generally avoid bending it.
A useful quantitative example is a nonrotating Boussinesq layer of depth , heated from below with temperature drop and threaded by a vertical magnetic field . Let , , denote kinematic viscosity, thermal diffusivity and magnetic diffusivity. In thermal-diffusion units define the Rayleigh number, Prandtl number, magnetic-to-thermal diffusivity ratio and Chandrasekhar number by
Use stress-free impermeable boundaries, fixed temperature perturbation zero, and magnetic boundary conditions keeping the field vertical. More explicitly, the normal modes below satisfy at . For a horizontal wavenumber , take , , and put . The linear temperature and resistive induction equation give and . Applying the solenoidal projection to the magnetohydrodynamic momentum equation removes pressure; the magnetic coupling is , and the vertical projected buoyancy has coefficient . Substituting the temperature and magnetic responses gives the vertical-field magnetoconvection dispersion relation
These stated boundary conditions make the single vertical mode exact in this model; other boundaries change numerical thresholds.
For steady marginal convection, set . The threshold curve is
The imposed magnetic field adds a positive penalty. Differentiating with respect to shows that the minimizing wavenumber obeys
At this gives and . With increasing , the root moves to larger because the left-hand side is strictly increasing for . The strong-field wavenumber selection in magnetoconvection limit is
Thus a strong vertical imposed field raises the steady threshold and selects narrower convection cells. At small horizontal wavenumber the incompressibility constraint makes a given vertical motion require large horizontal displacement and magnetic bending. Increasing horizontal wavenumber reduces this magnetic penalty, but increases viscous and thermal diffusion. Their balance selects the narrow cells. This statement is specific to the vertical-field geometry: wavenumber selection in oblique-field magnetoconvection can instead favour nearly field-invariant motions.
Oscillatory marginality in vertical-field magnetoconvection occurs because magnetic and temperature perturbations need not relax at the same rate. To exhibit the phase balance, substitute with and write the neutral condition as
The imaginary part must vanish because is real. Dividing that imaginary part by gives
so
A nonzero oscillation consequently requires and a sufficiently strong imposed magnetic field. In this regime thermal diffusion can erase the temperature anomaly faster than magnetic diffusion relaxes bent field lines. The magnetic restoring force can outlast the buoyant anomaly, reverse the motion, and maintain the phase lag needed for oscillatory instability. The real part gives the oscillatory neutral curve
Only its portions with are physical. The first onset is the lower of the minimized steady and admissible oscillatory thresholds; the existence of an oscillatory neutral solution at a given wavenumber alone does not establish that it is first. For example, at fixed and , both minimizing wavenumbers grow like for large , while and with . At those oscillatory minima, the positive order- contribution to dominates its order- negative contribution, so the oscillatory branch is genuinely admissible and becomes the lower threshold. An overstability therefore precedes steady onset in this limit. More generally nonlinear convection can oscillate even when linear onset is steady; the linear calculation is not a classification of every time-dependent state.
Figure 1.
Vertical-field scale selection and a schematic subcritical convective branch
. Details.
The nonlinear regime introduces a different feedback. The magnetic Reynolds number measures induction relative to diffusion for a finite convective velocity . At large but finite , persistent convection rolls can redistribute magnetic flux. In a two-dimensional incompressible roll, a flux function obeys
Circulation repeatedly stretches the flux pattern, building gradients on which even small magnetic diffusivity acts efficiently. Over the flux-rearrangement time this permits flux expulsion: the interior of a vigorous roll becomes weakly magnetized, while magnetic flux is concentrated near its edges. The weak-field interior then suffers less magnetic inhibition and can support broader, stronger convection than the linear narrow-cell prediction for the original uniform magnetic field. Exact zero resistivity would preserve material flux and cannot by itself justify the relaxed flux-expelled state.
The weak interior field also follows from a steady leading-order balance for a coherent two-dimensional roll. Let be its streamfunction and suppose its interior streamlines are nested closed curves with . In the small-diffusivity interior, implies . Integrate the full steady flux equation over the region enclosed by one streamline. Because there, the advection integral vanishes; the divergence theorem then gives . In a regular interior expansion this requires . The normal derivative of has one nonzero sign around a regular nested streamline, so . Hence the leading interior flux function is constant, and its spatial gradient, which gives the two-dimensional magnetic field, vanishes. The mismatch with external flux is accommodated by magnetic boundary layers. This argument assumes the coherent steady roll and a regular interior; it does not prove that every turbulent flow expels flux.
The mean imposed vertical magnetic flux is conserved for horizontally periodic boundaries. In a schematic two-region picture, let a fraction have weak field in vigorous convection and the remainder have field . Then
The intensified field outside the active cells inhibits surrounding convection. This gives magnetic flux separation: vigorous weak-field patches coexist with strong-field regions whose motion is small or occurs on a finer scale. The redistribution is a consequence of nonlinear induction and back reaction, rather than disappearance of the net imposed flux.
This feedback can permit subcritical magnetoconvection. Infinitesimal perturbations decay below the conductive state's linear threshold because they encounter the full imposed field. A finite-amplitude roll can nevertheless persist by first expelling enough flux to reduce its own magnetic restraint. A sufficient finite disturbance can then switch between the stable conductive state and a convective state, producing hysteresis. A schematic amplitude equation makes the distinction between local linear stability and finite-amplitude persistence explicit:
Here measures distance from linear onset; this is an illustrative normal form, not a claim that these coefficients have been derived for every magnetic layer. Writing , the nonzero equilibria satisfy
They appear at a saddle-node bifurcation at . For , the zero state is stable, the lower radial-amplitude branch is unstable, and the upper branch is stable because its radial derivative has sign . Thus finite-amplitude convection can coexist with a linearly stable conductive state below the onset threshold. Large facilitates the flux-expulsion mechanism but is not a universal sufficient condition: geometry, the imposed magnetic field, the capacity to form coherent recirculating cells, and magnetic back reaction all matter. The broad nonlinear cells in weak-field regions can coexist with much narrower cells in magnetically dominated regions, linking the nonlinear flux distribution back to scale selection.
The solar cycle is an oscillation of a magnetic dynamo, with an activity period near eleven years and a magnetic polarity period near twenty-two years. The observational task is to explain a structured, variable cycle rather than a perfectly periodic reversal of one uniform field. Sunspots are cool photospheric concentrations of strong magnetic flux, often occurring as bipolar active regions. Their number rises and falls through successive solar cycles. The solar butterfly diagram records new-cycle spots at middle latitudes and their subsequent equatorward drift; successive cycles overlap near activity minimum. Cycle lengths and amplitudes vary, and the two hemispheres need not evolve in exact synchrony.
Magnetic observations impose stronger constraints than the spot count alone. Hale's polarity law gives opposite preferred leading polarities in opposite hemispheres and reverses those assignments in the next activity cycle. Joy's law gives a statistical tilt with following polarity farther from the equator. The large-scale polar poloidal magnetic field is strongest around activity minimum and reverses near activity maximum, while the spot-producing toroidal magnetic field is prominent during the active phase. Poleward transport of dispersed active-region flux accompanies these polar reversals. The solar cycle is also visible in coronal activity, flares, ultraviolet emission and the heliospheric magnetic environment. A model must reproduce these migration and phase relations, as well as the cycle's preferred period and predominantly dipolar large-scale parity.
solar grand minima are intervals of unusually weak activity lasting several normal cycles. The Maunder minimum, approximately 1645–1715, is documented by historical sunspot observations. Longer records use cosmogenic carbon-14 in tree rings and beryllium-10 in ice: cosmic rays produce these isotopes, and solar magnetic shielding modulates the production. Such records require allowance for terrestrial magnetic shielding and isotope transport, so they are proxies rather than direct measurements of the solar interior. Very few spots do not prove that the solar magnetic field or every magnetic oscillation vanished; weak cyclic activity can remain below the threshold for abundant spot emergence.
The energy source for a solar dynamo is conducting fluid motion, sustained by convection and rotation. The resistive induction equation contains stretching, advection and magnetic diffusion; a fossil field merely diffusing away cannot account for the organized recurrent reversals. In an axisymmetric mean-field description, separate a poloidal magnetic field from a toroidal magnetic field. Differential rotation stretches poloidal flux into toroidal flux through the Omega effect, with source proportional to . This alone cannot complete a self-sustaining regeneration loop. Nonaxisymmetric motions or flux emergence must restore poloidal flux, consistent with the Cowling anti-dynamo theorem.
The averaged induction equation is
A local isotropic illustrative closure is ; solar rotation and stratification generally require more general tensor coefficients. Helical motions can provide an alpha effect, with the kinematic short-correlation estimate . Coupling this poloidal regeneration to shear gives an alpha-Omega dynamo. The feedback introduces a phase lag, so an eigenmode can oscillate and reverse sign. Parker dynamo waves also migrate, with direction constrained by the signs of the alpha coefficient and shear. Producing equatorward rather than poleward migration is therefore a physical test of the chosen source and rotation profile, not an automatic consequence of any oscillatory solution.
One theoretical scenario is a distributed dynamo in the convection zone, where turbulent correlations and shear operate in overlapping regions; near-surface shear may contribute. Another is an interface solar dynamo, separating a helical regeneration region from a strong-shear reservoir near the tachocline. The rotational transition and stable layer offer possible toroidal-field amplification and storage, but transporting field between separated regions is essential. Flux-tube or magnetohydrodynamic instabilities can supply alternative regeneration processes. Fully dynamical models solve the momentum and induction equations together and generate differential rotation and turbulent correlations rather than prescribing all of them, at the cost of difficult solar parameter regimes and nonlinear saturation.
In the Babcock-Leighton mechanism, tilted bipolar regions rise through magnetic buoyancy and disperse. Their systematically separated polarities undergo different cancellation and transport: following-polarity flux reaching the poles helps reverse and rebuild the polar field. This makes the observed tilt a source of poloidal regeneration and links surface processes to interior toroidal flux. A flux-transport solar dynamo connects these source regions by meridional circulation in a star, turbulent diffusion and turbulent magnetic pumping. Poleward surface transport and an assumed equatorward deep return can help explain the opposite migration of polar and spot-bearing fields. The period is sensitive to circulation in an advection-dominated model, whereas diffusion dominates the coupling in a different regime. Thus similar observed cycles may arise from different transport assumptions.
A linear growing dynamo must be saturated. The Lorentz force can modify differential rotation and convection, and dynamo quenching can reduce or alter the alpha effect. Magnetic-helicity constraints couple the large-scale and fluctuating fields; transport of helicity can matter for avoiding excessively strong quenching. Random variations of active-region tilts or turbulent coefficients produce amplitude fluctuations. Nonlinear mode competition and deterministic modulation can also produce weak epochs, while stochastic or internally generated intermittency can move a dynamo close to or below its excitation threshold. These are competing explanations for solar grand minima. A successful scenario must explain recovery as well as suppression: a poloidal source that depends entirely on large emerging spots becomes weak precisely when those spots disappear, so recovery may require a residual weak-field regeneration mechanism. Observed hemispheric asymmetry and persistence or loss of cycle phase during a weak epoch offer ways to distinguish the scenarios. The observations establish an organized magnetic cycle; they do not select one unique combination of source location, transport and nonlinear modulation.
A planetary magnetic field is evidence about electrical conductivity, fluid motion and thermal evolution, but its presence alone does not identify a present planetary dynamo. One must separate internal global fields, crustal remanent magnetization and currents driven by the solar wind. The following discussion uses the observational picture available by 2009, including the early MESSENGER flybys and the Voyager, Galileo and Cassini results.
Outside a planet's internal electric currents, the internal component is approximately a potential magnetic field. Its spherical harmonic of degree decreases as . Measurements at different positions and altitudes can therefore distinguish a deep, low-degree source from localized crustal anomalies and external magnetospheric currents. Repeated observations, radio emissions, aurorae and particle measurements supply complementary evidence for a magnetosphere, while slow secular variation and records of past reversals test the internal field's evolution.
For Earth, ground observatories and satellite measurements reveal a predominantly dipolar field of several tens of microtesla at the surface, tilted relative to the rotation axis and changing with time. Magnetic minerals in rocks record a much older field and repeated geomagnetic reversals. These observations, together with seismic evidence for a liquid outer core, support an operating planetary dynamo in conducting iron alloy. Core temperatures exceed the relevant Curie temperatures, so ordinary permanent remanent magnetization cannot explain the main field. Thermal convection, cooling and compositional convection associated with inner-core growth supply buoyancy; the Coriolis force organizes the motion. The observed nonaxisymmetric components and time dependence are consistent with a dynamic source, rather than a fixed bar magnet.
Mariner 10 and the first two MESSENGER flybys established a weak but coherent intrinsic field at Mercury, with roughly dipolar structure closely aligned with its rotation axis. It is much weaker than Earth's surface field, but its global character favors a deep source over an explanation solely by localized crustal patches. A planetary dynamo in a fluid part of Mercury's large iron-rich core is the natural interpretation, supported by evidence for a molten core component. Light elements can depress the alloy's freezing temperature, and thermal or compositional buoyancy can maintain motion. Slow rotation is not enough to rule out dynamo action. The limited pre-orbital measurements do not uniquely determine the detailed core structure or the mechanism responsible for the field's weakness.
For Venus, spacecraft including Pioneer Venus found no appreciable internally generated global field. Nevertheless its ionosphere interacts with the solar wind, producing magnetic draping, a bow shock and an induced magnetosphere. Those external signatures are not evidence for an internal planetary dynamo. Venus is comparable to Earth in size and may possess a substantial conducting core; the absence of a detectable dynamo therefore need not mean that all of its core is solid. Insufficient core heat loss or stable stratification can prevent the required convection. Its slow rotation can affect flow organization, but rotation rate by itself is not a sufficient explanation of the contrast with Earth or Mercury.
For Mars, Mars Global Surveyor found strong, spatially localized crustal anomalies, especially in ancient southern terrain, rather than an appreciable present global dipole. This is remanent magnetization, indicating that an ancient field magnetized the crust while it formed and cooled. The distribution of anomalies and weakly magnetized major impact basins constrain when that ancient planetary dynamo operated; crustal magnetization is a record of past activity, not a present global dynamo. Modern interaction with the solar wind also produces an induced magnetosphere. Cooling and changes in core heat extraction can explain the cessation of dynamo-driving convection; the observations alone do not prove complete solidification of the core.
For Jupiter, radio emissions, its intense radiation belts and measurements by Pioneer, Voyager and Galileo demonstrate a strong global intrinsic field and an enormous magnetosphere. The field is broadly dipolar but tilted and contains higher multipoles. It is generated in a deep conducting fluid rather than by a permanent solid magnet: the principal conducting region is metallic hydrogen in the high-pressure interior. Cooling and gravitational energy release maintain convection, while rapid rotation organizes the flow. Plasma supplied by Io and currents in the magnetosphere strongly modify the observed external field, but cannot account for the internally sourced planetary component. Jupiter's large magnetic moment also reflects its large size; a moment ratio should not be confused with the ratio of local surface field strengths.
For Saturn, Pioneer, Voyager and Cassini measurements likewise show an intrinsic field and a magnetosphere, with a dipole strikingly close to the rotation axis. A planetary dynamo in conducting metallic hydrogen is supported by the same broad interior argument as for Jupiter. Interior cooling and differentiation can provide power, including energy associated with helium separation. The near alignment does not invalidate the Cowling anti-dynamo theorem: that theorem excludes an exactly axisymmetric isolated dynamo field, not a predominantly axisymmetric exterior with undetected nonaxisymmetric structure in its source region. A stably stratified conducting layer above the active region is one possible way to attenuate the observable nonaxisymmetric components; it is a model, not a uniquely established consequence of the observations.
For Uranus, Voyager 2 in 1986 observed an intrinsic field with a dipole tilted by about to the rotation axis and significantly displaced from the centre. Higher multipoles are substantial, so a centred dipole is an inadequate description. The field and associated magnetosphere indicate an active planetary dynamo, despite the planet's small intrinsic heat flux. That low luminosity constrains its thermal evolution and may indicate inhibited deep mixing; it does not demonstrate an absence of all conducting-fluid motion. A conducting, volatile-rich fluid shell is a plausible source region. The term ice giant describes bulk composition, not a claim that the dynamo region is ordinary frozen ice.
For Neptune, Voyager 2 in 1989 also found a highly non-dipolar, displaced intrinsic field, with a dipole tilt near . Its field, radio emissions and magnetosphere imply another active planetary dynamo. Its larger intrinsic heat flux than Uranus supplies evidence for substantial continuing interior energy transport. Electrically conducting water-ammonia-rich mixtures at high pressure, with ionic or otherwise mobile charges, can supply the conducting region without requiring the metallic hydrogen layer characteristic of gas giants. Numerical dynamos in convecting shells surrounding more stably stratified interiors can produce strongly nonaxisymmetric, multipolar fields resembling those of the two ice giants. Such models show that their unusual field geometry is compatible with dynamo action, but field measurements do not uniquely identify the shell's composition or thickness.
The maintenance mechanism is governed by the resistive induction equation,
A conducting fluid needs a sufficiently large magnetic Reynolds number and a flow geometry that regenerates magnetic flux rather than merely amplifying one component temporarily. Three-dimensional stretching and twisting can couple poloidal and toroidal fields; strictly planar regeneration and a strictly axisymmetric magnetic field are restricted by the relevant anti-dynamo theorems. Rotation influences this regeneration through the Coriolis force, but does not provide an inexhaustible power source merely by being present.
Without regeneration, the characteristic magnetic diffusion time is . For a terrestrial core scale of order metres and diffusivity of order one square metre per second, this is of order – years, far shorter than geological ages. Long-lived global fields therefore require continual energy input. A schematic magnetic energy balance is
when boundary energy fluxes vanish. Mechanical work against the Lorentz force density supplies the energy lost as Ohmic heating. Thermal cooling, latent heat release, compositional convection and differentiation supply that mechanical power. Magnetic feedback eventually changes the flow and saturates the field. Strong conductivity without an adequate energy source is not sufficient for a dynamo.
The 2009 observations support active global dynamos in Mercury, Earth, Jupiter, Saturn, Uranus and Neptune; Venus has no detected appreciable intrinsic dynamo field, and Mars preserves evidence of an extinct earlier dynamo in its crust. Induced fields and surviving remanence explain why planets without a current global dynamo can still display magnetic phenomena. The diversity of field geometries and strengths constrains, rather than uniquely solves, the diversity of planetary conducting regions and their convective histories.
Efficient convection makes the interior follow a nearly adiabatic process and maintains uniform specific entropy. For the fully ionized monatomic ideal gas, the specific-heat ratio is , so the adiabatic temperature gradient gives . Integrating at a fixed time gives
The coefficient is spatially constant because the composition and specific entropy are uniform. It can change as the star loses energy. Equivalently the gas is an adiabatic stellar polytrope with and polytropic index ; and the pressure-temperature coefficient are different quantities.
This fixes the dimensionless Lane-Emden equation profile throughout a stellar homology sequence. Writing in the mass integral gives , with a fixed positive shape constant . Integrating the stellar hydrostatic equation through the same profile, with negligible surface pressure compared with central pressure, gives . Hence
These are homology scalings of central stellar pressure. Substituting the central quantities into yields
Thus is constant for the fixed stellar polytrope family.
At the approximate photosphere, take and use the ideal gas relation . The prescribed opacity gives
The stellar surface boundary condition and surface gravity of a star therefore imply
This is the temperature-four special case of convective contraction with power-law opacity.
Using the Stefan–Boltzmann law, the luminosity is
For , the supplied gravitational-energy formula is . The stellar virial theorem for a monatomic gas gives , so the total energy is . During Kelvin-Helmholtz contraction, with constant mass and no significant nuclear source, . Thus
Multiplying by and integrating gives
The sign makes the radius decrease as time increases.
When the accumulated contraction term dominates the initial-radius term, this yields . Combining it with the central ideal gas temperature gives the late-time central-temperature scaling
Replacing by gives the stated late-time form. The asymptotic step also requires a time long enough to forget the initial radius, not merely a choice of zero for the age.
The helium mass fraction is . For the two compositions, and . The mean molecular weight is therefore
At fixed mass and with the same prescribed opacity coefficient, part (a) gives and . Eliminating radius gives
This is the composition shift of a convective pre-main-sequence track. The higher-helium mass fraction case is hotter at a given luminosity, lying to the left of the case in a Hertzsprung-Russell diagram. Its fixed-luminosity temperature ratio is .
Both stars contract, so both and decrease in this particular opacity model. Their nearly vertical Hayashi tracks therefore run downward and slightly to the right, with arrows in that direction:
Figure 1.
Composition-dependent pre-main-sequence tracks with contraction arrows
. Details.
The plotted luminosity and effective temperature are normalized to arbitrary common references; no opacity normalization or absolute age was specified. The comparison holds the given opacity coefficient fixed.
These paths cease to apply when their assumptions fail. Deuterium-burning energy-generation rate can temporarily slow contraction; sustained hydrogen burning ends the purely gravitational phase. Formation of a radiative core breaks the fully convective adiabat and can lead to a Henyey track toward hotter effective temperature. Partial ionization, a changing atmospheric opacity, and electron degeneracy pressure alter the equation of state or boundary relation. Accretion luminosity, changing mass, and magnetic inhibition of convection can also modify a young star's path.
In stellar homology, the dimensionless radial profiles are the same after scaling radius, enclosed mass, pressure, temperature and luminosity. At corresponding radii let , , , and . The printed is understood as this local radial scaling, with surface radius .
Let and keep composition, opacity coefficient and nuclear coefficient fixed first. Mass conservation gives , and hydrostatic equilibrium gives . The ideal gas law then gives . Scaling the stellar energy-generation rate equation and the stellar radiative temperature gradient gives respectively
The second follows from , not from energy production. Equating the two luminosity scalings gives
This assumes the denominator is nonzero and a consistent homologous family exists. If the mean molecular weight differs by , then and
Ratios of the opacity and energy-generation coefficients multiply the right-hand side. Thus fixed composition is a real restriction, not an automatic property of every stellar sequence.
Use the Stefan–Boltzmann law to locate the family on a Hertzsprung-Russell diagram. It implies and
For proton–proton chain burning take the usual local approximation , with Kramers' opacity law , . Then
For the CNO cycle with electron-scattering opacity, , so
A conventional local choice gives and slope . Choosing instead gives slope . The source specifies no numerical nuclear exponents, and the effective exponent changes with temperature; the general expression is the unambiguous answer.
Figure 1.
Idealized radiative homology branches on a Hertzsprung-Russell diagram, with pp exponent 4 and CNO exponent 16
. Details.
The Hertzsprung-Russell diagram places hotter stars to the left. Its branches rise toward higher luminosity and mass, and the CNO cycle/electron-scattering opacity branch has the steeper logarithmic slope. Their illustrative joining point and normalization are arbitrary because the proportional opacity and reaction laws do not specify absolute stellar scales. These are the fully radiative ideal-gas homology predictions, not exact observed main sequence relations: convection and increasing radiation support limit those assumptions in real stars.
Let increase outward and define the inward optical depth by . With constant outward internal radiative flux , radiative diffusion gives
The constant is a boundary condition; diffusion alone does not determine it. For an unirradiated grey atmosphere with the Eddington closure approximation and Eddington surface boundary condition, , so
The internal effective temperature of a planet is defined by its intrinsic cooling flux, not by its incident stellar heating. Since and , temperature decreases outward. Towards the thin upper layers, ; if the density and optical-depth gradient vanish there, . This is the upper nearly isothermal atmosphere. The diffusion approximation itself fails at small optical depth: the grey boundary closure supplies the approximate continuation. Small irradiation perturbs this intrinsic-flux solution.
Young, self-luminous gas giants at wide orbital separations can have intrinsic cooling dominate their photospheric budget. They are favorable for exoplanet direct imaging, especially in the infrared, where their own thermal radiation is easier to separate from the host light. A strongly irradiated hot Jupiter instead has a large stable outer radiative region set mainly by stellar heating; it can be nearly isothermal over a broad pressure range or develop an atmospheric thermal inversion if stellar light is absorbed sufficiently high. Inversion is not inevitable for every strongly irradiated planet. Deep convection begins below its radiative-convective boundary.
Figure 1.
Intrinsic grey-atmosphere cooling profile compared with illustrative irradiated hot-Jupiter profiles
. Details.
The intrinsic curve follows the grey formula. The irradiated curves illustrate possible shapes only; they are not solutions for a specified opacity model. Smaller optical depth corresponds to greater altitude.
Use a dry ideal gas of fixed composition with specific gas constant and constant specific heat capacity at constant pressure . For a fixed-mass parcel, constant and imply
Along a hydrostatic adiabat, ; hence the dry adiabatic lapse rate is
For an actual pressure-balanced parcel rising in an ambient atmosphere, instead gives . The usual lapse-rate expression is exact for a hydrostatic adiabatic column and is the local first-order result at the launch point where , as needed in a linear stability test. Treating an already much hotter parcel as an exact copy of the ambient hydrostatic column would be an extra approximation.
After a small upward displacement from temperature equilibrium, its temperature excess is
At equal pressure, warmer gas is less dense and continues to rise. Thus the Schwarzschild criterion in altitude form is
The supplied non-strict inequality includes the marginal case; strict growth requires the strict inequality. A downward displacement gives the same stability conclusion. Efficient convection normally adjusts an initially superadiabatic gradient to a nearly adiabatic one.
Deep envelopes of gas giants and ice giants commonly transport intrinsic heat by convection, as do the planetary tropospheres of many weakly irradiated atmospheres. Earth's dry troposphere provides another approximate example, with moisture changing the lapse rate. Strongly irradiated hot Jupiters can still have deep convective interiors, while their upper radiative regions need not be convective. Composition gradients can modify the homogeneous-gas criterion and inhibit overturning even in an interior.
In local thermodynamic equilibrium, thermal intensity samples the Planck function near an optical depth of order unity. The Eddington-Barbier relation makes this explicit: . A molecular band has greater opacity than its adjacent continuum and therefore samples a higher layer. A band in emission relative to the continuum implies that this higher layer is hotter: the line-forming region has an atmospheric thermal inversion under the assumed LTE, thermal interpretation.
The continuum is thermal radiation from an optically thick, deeper photosphere, with comparatively smooth opacity. In an H/He hot Jupiter, collision-induced absorption by H2-H2 and H2-He collisions supplies an important continuum; weak overlapping molecular lines and opaque exoplanet clouds can contribute too. It is not a separate blackbody emitter floating above the gas. A strongly isothermal layer would erase LTE molecular contrast rather than generate emission peaks.
In the emitting inversion, , whereas the dry adiabatic lapse rate has . Therefore
which lies on the stable side of the Schwarzschild criterion. An upward-displaced parcel cools and becomes denser than the ambient hot upper gas. The region can thus carry and redistribute thermal energy by radiative transfer, not by unstable thermal convection. Winds may transport energy horizontally; stability rules out the specified buoyant vertical convection, not every possible motion.
For typical well-mixed structures, the dominant processes are:
Representative temperatures must specify the level: Earth has about at the surface (about effective emission temperature); Jupiter has about near one bar (about effective temperature); hot Jupiters commonly have photospheric temperatures of order –; and the Sun's photosphere is about . Upper layers, nightsides, deep interiors and the solar corona have different temperatures. These are characteristic values, not constant temperatures throughout each atmosphere.
The pressure axis increases downward in the sketches. Solid red segments indicate efficient convection; blue segments indicate mainly radiative transfer. The boundaries are nominal examples, since radiative-convective boundary pressure depends on opacity, gravity and intrinsic flux.
Figure 1.
Qualitative solar-system, irradiated hot-Jupiter and isolated young-giant temperature profiles with radiative-convective boundaries
. Details.
For Earth, the convective troposphere lies beneath a radiative stratosphere, with the transition near -- bar. The larger solar-system planets likewise have deep convective regions beneath largely radiative upper atmospheres; their tropopause/upper radiative-convective boundary is commonly of order -- bar. Their temperatures differ greatly from Earth's, and detached radiative layers can occur deeper down.
For an irradiated hot Jupiter, absorbed stellar flux maintains a hot, extended, relatively shallow-gradient radiative atmosphere. In models with a weak old-planet intrinsic flux, the deep radiative-convective boundary can lie around -- bar, with a useful wider model-dependent range of tens to thousands of bars. A thermal inversion can appear at low pressures if visible/UV absorption heats the upper atmosphere. Below the deep boundary the profile joins a convective adiabat.
A young, directly imaged exoplanet on a distant orbit is primarily heated from within. Its photosphere commonly joins the convective interior at order -- bar, illustrated here at one bar. The temperature generally rises monotonically with pressure over the infrared-forming layers. Strong stellar heating is absent, so a broad stellar-heated isothermal layer is unnecessary.
Two differences in thermal inversions are their absorbers and their formation conditions. Earth's ozone layer and solar-system hydrocarbon absorption can heat upper layers; the proposed hot-Jupiter absorbers include refractory titanium monoxide/vanadium monoxide or other strong visible absorbers, since ozone and methane-rich cold-planet chemistry are unsuitable at very high temperatures. Hot-Jupiter inversions depend strongly on irradiation, atmospheric cold traps and atmospheric transport, and can occur at mbar-to-sub-bar pressures; Earth and the solar-system giants have cooler, established stratospheres above their shallow tropospheres.
Two differences between the hot Jupiter and distant young-giant profiles are external versus internal heating, and the depth/shape of the radiative zone. The former can have a broad warm radiative layer, a much deeper convective boundary and sometimes an inversion; the latter typically has a steeper outward decrease toward a photosphere, a shallower boundary and no irradiation-driven inversion. These are class trends, not a unique temperature profile for every planet.
The three basic modes are radiation, convection and thermal conduction. Radiative transfer dominates transparent atmospheric layers; convection carries heat through sufficiently unstable fluid regions; thermal conduction matters especially in solids or highly conducting dense material.
Consider a chemically homogeneous ideal gas atmosphere and a small, dry parcel displacement, with rapid pressure equilibration and negligible heat exchange during the displacement. The parcel's first law of thermodynamics per unit mass is
For an adiabatic process, . Using hydrostatic equilibrium, , the parcel follows
After an upward displacement , its temperature relative to its new surroundings is
Here is the specific heat capacity at constant pressure, and is the buoyancy frequency. At the same pressure, a warmer parcel has lower density and accelerates upward. Thus strict instability requires . Equivalently, the parcel equation is , with
Negative gives growing displacements. The printed non-strict inequality includes the onset boundary: equality is neutrally stable, not a strictly growing instability. This dry parcel buoyancy in a homogeneous atmosphere is the dry Schwarzschild criterion; condensation and composition gradients require modified criteria.
For an old, approximately solar-composition H/He object with no strong irradiation or ongoing heat input, the cold mass-radius relation reaches a broad maximum of order one Jupiter radius, nominally about --, at a few Jupiter masses. This is a property of that composition and low-entropy sequence, not a composition-independent theorem from hydrostatic equilibrium alone. Young isolated substellar objects can be larger while cooling; strict thermal steady state of a non-burning isolated body would require its internal luminosity to vanish.
Figure 1.
Schematic mass-radius sequence from ice giants to low-mass stars with composition and degeneracy slope guides
. Details.
At low mass, an incompressible fixed-composition approximation gives , so . Ice giants contain dense heavy material and modest H/He envelopes, so real radii depend strongly on composition and are not obtained by extending a pure-hydrogen curve through them.
Gas giants approach a regime in which Coulomb interactions, compression and partial electron degeneracy pressure compete. An approximate index-one stellar polytrope, , gives at fixed , explaining the broad Jupiter-sized plateau. In the nonrelativistic degenerate limit, is an index- stellar polytrope, giving at fixed composition. This is a limiting slope; finite-temperature brown dwarfs do not follow that exact power law over their entire observed mass range.
The general polytropic mass-radius relation displays both limits:
At roughly , deuterium burning becomes possible, with a composition-dependent threshold. This is a conventional planet/brown-dwarf division rather than a unique formation definition. At roughly --, about --, sustained hydrogen burning can support a low-mass star. Its nuclear energy supply maintains a specific entropy that prevents indefinite cooling onto the cold substellar sequence; its approximate main-sequence relation is over a limited low-mass interval.
Ice giants chiefly lose formation heat and some gravitational/radiogenic energy, with convection in fluid regions and thermal conduction or inhibited convection where composition stratifies the interior. Gas giants and non-burning brown dwarfs radiate stored heat and contraction energy; their deep interiors are largely convective, with radiative photospheres. Helium separation can supply extra gravitational energy in mature giant planets, while brown dwarfs above the deuterium threshold have a temporary nuclear contribution. Low-mass stars are powered primarily by hydrogen fusion and are largely or fully convective at the lowest stellar masses. The transition to sustained fusion is the essential change from a cooling body to a long-lived thermal balance.
Take positive downwards from the roof. Write , , and . The cooled magma follows the decreasing liquidus from towards ; the initially superheated liquid starts at above that liquidus. The solid has zero solute concentration. At each temperature in the mushy layer, a horizontal tie line joins the pure solid to the residual liquid on the liquidus. The lever rule gives the liquid fraction from the bulk concentration. Since , this path stops before the eutectic temperature and does not cross the eutectic composition.
Figure 1.
Liquid cooling, residual-liquid enrichment and a solid–liquid tie line in the stagnant magma mush
. Details.
The porosity denotes the liquid fraction, so is the solid fraction. Equal phase mass densities remove volume-change flow; the stable density stratification suppresses convection. In the stagnant mushy-layer model, define bulk specific enthalpy and bulk solute concentration by
The arbitrary reference of specific enthalpy has been omitted. The two conservation laws in are
Here is the thermal diffusivity, with the thermal conductivity. The positive term records increased specific enthalpy on melting; during freezing it supplies latent heat. In the liquid , the heat equation and solute diffusion equation are
where is the solutal diffusivity. Neglecting solute diffusion inside the mushy layer does not permit dropping in the liquid at this stage.
Use , liquid and as , and initially , , for . These are the half-space boundary conditions appropriate before cooling reaches the bottom of the chamber. For a closed chamber of finite depth , replace the far-field conditions by the specified bottom conditions, for example at an insulated impermeable floor; the half-space similarity solution then ceases to apply when the thermal penetration depth approaches .
At , let and be the common liquid concentration and temperature, and let be the limiting porosity on the mush side. Continuity of , the Rankine-Hugoniot condition for solute, and the interfacial conservation of energy give
The first condition has the sign of solute rejection into the liquid. For the sharp-edge stagnant mushy-layer model with nonzero liquid solutal diffusivity, close the free-boundary problem by marginal equilibrium at a mush-liquid boundary:
This prevents constitutional supercooling immediately ahead of the mushy layer. A small solid fraction jump at its edge is allowed: imposing as well as these finite- conditions would generally overdetermine the reduced model. At the roof, follows from the liquidus, and no additional solute-flux boundary condition is needed in the diffusion-free mush.
To obtain the large-concentration similarity solution, put
The positive superheat specifies the physically intended liquid initial state. On a similarity solution, are constant, so every newly incorporated level leaves the same constant . Write and . Then throughout the mushy layer
For , , and , the effective heat capacity is constant to relative error . Thus set
Integration of the similarity solution ordinary differential equation gives the leading analytical profiles
The temperature is . In the mushy layer, the concentration and porosity are the displayed ; in the liquid,
These retain the liquid solutal boundary layer. For completeness, finite- values of are determined analytically, to the same large- order, by setting
and solving
The solute jump gives exactly; replacing by on the right of the last equation retains that jump's next-order factor, but does not make the linearized thermal profiles exact at finite . The branch has , . All these profiles are leading asymptotic expressions, not exact solutions of the nonlinear finite- heat equation.
For at fixed positive , the complementary error function asymptotic gives , hence , , , and . The result simplifies to
In particular, and . There is no finite interfacial latent heat jump in this limit: the latent heat is released continuously throughout the mushy layer. Matching the two temperature gradients gives
The printed final equation is missing the square on in the exponential. The corrected exponent follows directly from differentiating and is consistent with . The positive root is unique: the mush-side gradient decreases from infinity to zero with , whereas increases. The zero-superheat limit is singular and is not described by a finite positive in this two-region construction.