Sodium export cost from a capacitive vesicle Created 2026-10-25 Updated 2026-11-05
Start at sodium electrochemical equilibrium with internal ions. Exporting ions changes the membrane potential by and the internal number density to . Subtracting the initially balanced chemical and electrical contributions gives the displayed incremental cost. An initial zero potential further implies for an ideal fixed external reservoir. Nonzero initial equilibrium potential permits unequal concentrations, so that latter equality is an additional assumption.
Solid electrolyte Created 2026-10-14 Updated 2026-10-20
A solid electrolyte carries electric current through mobile ions while remaining a solid. The distinction between ionic and electronic electrical conductivity matters: different charge carriers serve different roles in electrochemistry.
Solubility 2026-10-14
Solubility specifies the amount that can remain dissolved at chemical equilibrium under stated conditions; it is different from how quickly a sample dissolves. Separating ions from an ionic crystal costs energy, but solvation establishes new interactions with the solvent. In water, hydration of ions couples charged ions to polar water molecules. The net enthalpy of dissolution can have either sign; entropy and concentration also enter the Gibbs free energy balance. Consequently, being a salt does not guarantee high solubility in water or any other solvent.[ref]
Low solubility must also be distinguished from weak electrolyte behavior. A small amount of an ionic compound can dissolve essentially completely as ions, giving few charge carriers because little material dissolved. Calling that a weak electrolyte solely because its chemical solution conducts poorly would conflate two different questions.[ref]
Solubility product 2026-10-14
The solubility product is the equilibrium constant for dissolution of a specified solid into its dissolved ions. For a pure bulk AB solid at the chosen temperature, pressure and standard states,
The pure bulk solid's thermodynamic activity is one in this convention. Coexisting solid and chemical solution at chemical equilibrium give this equality. If all available solid dissolves, the final chemical solution may instead be undersaturated; do not impose equality merely because a salt was initially added.[ref]
Using the thermodynamic activity definition , with activity coefficients and reference molar concentration , gives the independent conversion
Thus is dimensionless, while the conditional concentration form has units for this one-to-one model. Treating as constant requires a justified fixed or approximately fixed activity coefficient product. Changing ionic strength can change that product even at fixed temperature; changing temperature can change the equilibrium constant itself. Specify the solid thermodynamic phase too: different crystal polymorphs need not have the same solubility product.
A solubility product constrains a product of thermodynamic activities; the available inventories determine which combinations of concentrations are possible. Their intersection determines the molar solubility. Consider an original, abstract AB solid, with the preceding one-to-one dissolution chemical equation. Stipulate , and at fixed temperature and pressure. Thus is dimensionless. These are chosen model parameters, not data for an identified material.
Initially, a completely dissociated soluble XB salt supplies B anions at molar concentration and X cations at the same molar concentration; A is absent. All three ions have unit electric charge magnitude. X remains a spectator ion, and only AB can form a solid. Assume constant volume, no additional chemical reactions, and negligible contributions from self-ionization of water. Dissolving AB raises both reacting-ion concentrations by the same :
Charge neutrality is satisfied: . Adding B alone without its accompanying cation would omit the initial electric charge balance.
In the plane of the two reacting-ion concentrations, this inventory constraint is the line . Saturation supplies the hyperbola for . Their positive intersection solves a quadratic equation:
The quadratic formula supplies two roots of a polynomial; only the positive one is a physical concentration. Uniqueness also follows because strictly increases for , starting at zero and growing without bound. The second expression, obtained by multiplying by the conjugate, avoids subtraction of nearly equal numbers at large .
Figure 1. . Original stipulated AB model with and unit activity coefficients. Intersections of the saturation hyperbola with inventory lines give the pure-water and common-ion chemical equilibrium compositions. The dashed projections read the intersection; these curves are calculated constraints, not measured data or a time evolution. Details.
For pure water, gives . For ,
Their product is , although neither concentration equals the pure-water value. This is the useful geometrical distinction: an inventory line and an equilibrium constant specify different constraints.
Check the solid inventory before imposing saturation. If the initially added AB has amount of substance in volume , the saturated branch requires for excess solid to remain. For example, choose and . In pure water, dissolves and the same amount of substance remains as solid. At , approximately dissolves, leaving as solid. In this model, an insufficient supply instead gives
If , all AB dissolves and the ion product is below the solubility product. At , the last solid disappears exactly at saturation.
Solute Created 2026-10-13 Updated 2026-10-14
A solute is a component of a chemical solution distinguished from its solvent, typically present in a smaller proportion. There can be several solutes. A concentration must name both what is counted and the denominator: molar concentration uses amount of substance per final chemical solution volume; a solute-to-solvent mass ratio has another denominator.[ref]
“Added sodium chloride” and “dissolved sodium cations” describe different levels of the same inventory. Dissociation of an ionic compound changes the grouping of the particles; it preserves their chemical elements. A dissolved ion remains an ion, and dissolved sucrose remains molecular unless a separate chemical reaction occurs. Thus the name of the weighed solute need not be the name of every dissolved chemical species.
Solution (chemistry) Created 2026-10-13 Updated 2026-10-14
A chemical solution is a homogeneous mixture in which designated solutes are distributed in a solvent. Representative equal-volume samples have the same composition after mixing. Individual molecules and ions remain distinguishable. The solute/solvent labels describe their roles in this mixture.[ref]
A dissolved solute is dispersed as molecules, chemical atoms, or ions, rather than as the larger solid particles of a particle suspension. For example, sucrose retains its molecular formula during dissolution in water; a chemical reaction is not required. Dissolved sodium chloride supplies sodium cations and chloride anions, surrounded by water molecules through solvation. Dissolved does not mean chemically destroyed or converted into water.[ref]
Figure 1.
Dissolution disperses particles while preserving their chemical elements
. Original schematic with invented particle positions, not a microscopy image. Top: four generic neutral molecules retain their identity. Bottom: four sodium cations and four chloride anions separate from an ionic crystal. Pale dots represent water molecules; sizes, spacing, and counts are explanatory, not measured. Solvation surrounds each dissolved species; the diagram does not specify a hydration shell geometry. Details.
This makes a useful connection between microscopic identity and laboratory sampling. If a chemical solution is well mixed, the amount of substance in a measured portion follows from its concentration and volume. A scoop from a poorly mixed particle suspension need not represent the whole vessel. Visual clarity alone cannot establish composition or exclude a fine dispersion; the quantitative claim needs representative sampling.
Solvation Created 2026-10-14 Updated 2026-10-20
Solvation is stabilization through interactions between a solute and its solvent. It involves both the solute's surroundings and reorganization of the solvent: neighbors move, orientations change, and existing interactions compete with new ones. Electric forces, Van der Waals forces, and specific interactions such as hydrogen bonds can contribute. Solvation can also occur at groups on an insoluble material, so it does not require complete dissolution.[ref]
Solvation by water is called hydration. Hydration of ions is the charged special case, but neutral molecules such as sucrose can also interact with water without becoming ions. A hydrated cation retains its positive net electric charge; orienting neutral water molecules around it does not supply an extra electron. Dissolution, desolvation, and ionization describe different changes, as the examples below show.[ref][ref]
The useful question is therefore not just whether a solute attracts a solvent, but how much the whole system gains after paying for the rearrangements. Solvation free energy describes a specified transfer into a solvent; solvation thermodynamic balance explains why even cooling during dissolution can accompany favorable mixing. The existing solubility discussion concerns how much remains dissolved at chemical equilibrium.
Solvation shell Created 2026-10-14 Updated 2026-10-20
A solvation shell is the region of solvent constituents surrounding a solute, with local arrangements influenced by their interactions. The first solvation shell contains the closest neighbors under a stated distance or interaction criterion. A coordination number counts those neighbors; it requires such a criterion and can fluctuate. Neither a drawn ring nor a few illustrated molecules determines a measured coordination number.
In a liquid, a solvation shell is an evolving neighborhood: solvent molecules reorient and exchange with the surroundings. Different ions can produce different local dynamics. Spectroscopic measurement of hydration dynamics provides an experimental way to distinguish some of those environments without pretending that a shell is a fixed cage.
Solvent-specific stabilization means that the same species need not have the same solvation free energy in different solvents. Chemical polarity, hydrogen bonds, and the cost of reorganizing each solvent all matter. Water can stabilize ions by ion-dipole attractions; a favorable isolated attraction alone still cannot decide the total dissolution balance.[ref]
With a common gaseous reference and compatible dissolved standard states, subtraction removes that reference:
A negative result favors solvent B under those reference conventions. This comparison assumes the same species : if protonation, ionization, or formation of ion pairs changes its identity, include a chemical equilibrium for each corresponding chemical reaction.
Space focusing 2026-11-05
Space focusing in time-of-flight mass spectrometry reduces differences in arrival time caused by the initial positions of otherwise equivalent ions. An ion starting farther from the exit of an accelerating region spends longer there but can acquire greater kinetic energy, allowing it to catch up during the drift. Electrode geometry and electric fields are chosen so that these effects compensate at the detector.[ref]
A simple idealized derivation makes the compensation explicit. Consider positive ions of mass and electric charge , initially at rest, with distance remaining in a uniform accelerating electric field . Let be the field-free distance beyond its exit. Their total flight time is
The first term is acceleration time; the second is drift time. Setting the derivative to zero at a reference position gives
For example, gives a first-order space focus at in this simplified single-field model. Nearby position errors then affect arrival time only at higher order in the Taylor expansion. Practical two-field sources allow the focus to be placed at more useful drift distances. Initial velocity spread is a separate contribution to peak width, motivating time-lag focusing.
What separates a hydration shell from the surrounding water experimentally? Electrical conductivity addresses a different question. The documented lamp demonstration immerses metal electrodes in a chemical solution, rinses them between samples, and records brightness; adding sodium chloride to distilled water makes it conductive. A water blank and dissolved sucrose comparison test whether dissolved material alone explains the signal. Fixed geometry, temperature, and stated concentrations are additional proposed controls. This reveals mobile electric charge, with limits from contamination, electrode interfaces and detection threshold; it supplies no shell positions. Conductivity experiment on salt solutions explains the apparatus and controls in detail.[ref]
In the authored study Influence of ions on the hydrogen-bond structure in liquid water by Anne Willem Omta and others, pump-probe spectroscopy uses tunable mid-infrared pulses traversing a sample. The probe's wave polarization is set at to the pump; after the sample, splitting and polarizers select parallel and perpendicular transmission. Measuring each transmission with and without the pump gives and , the respective logarithms of the transmission ratios. Their dimensionless anisotropy is
Its decay probes reorientation rather than merely loss of vibrational excitation. Dilute semiheavy water in heavy water separates the O–H and O–D bands. Varying the semiheavy water concentration checked that transfer of excitation between nearby O–H groups did not determine the decay. These apparatus and control details are from the inspected author-uploaded article, not a new experiment.[ref]
The related thesis chapter documents two O–H absorption bands in a sodium perchlorate chemical solution: approximately for groups forming hydrogen bonds to water, and for groups forming hydrogen bonds to the anion. Selecting pump and probe bands, then a later delay window, separated their responses. The anion-associated anisotropy decayed more slowly; the water-bonded component showed no resolved change in decay time across the tested sodium perchlorate concentrations. The chapter also used O–D excitation to extend observation beyond the shorter O–H vibrational lifetime. These results support distinct local dynamics rather than a permanently fixed hydration shell. Spectral overlap, finite observation windows, and the selected salts limit the inference: this does not prove that every ion leaves all distant water properties unchanged.[ref]
Spin-one-half paramagnetic magnetization Created 2026-10-18 Updated 2026-11-05
For independent localized two-state moments of projections along a field, the one-ion partition function is . Its thermal mean gives . A ion has , so the special value additionally assumes . At weak field the SI volume susceptibility is , neglecting demagnetizing corrections.
Sputtering 2026-10-18
Sputtering ejects surface chemical atoms from a solid through bombardment by energetic incident particles, often ions.
Stern layer Created 2026-10-20 Updated 2026-11-05
The compact interfacial region associated with finite ion closest approach and specifically adsorbed charge. A diffuse electrolyte layer lies beyond it.
Stern model Created 2026-10-20 Updated 2026-11-05
A model separating a compact interfacial layer from a diffuse ion distribution. Specified adsorption and boundary conditions determine the potential at the outer compact-layer boundary; a diffuse-layer equation alone does not determine specific adsorption.
For a neutral formula unit, let count ions of type with electric charge , where is the elementary charge. The stoichiometry must satisfy
For and , the smallest positive counts are . For and , they are , giving calcium chloride : . The formula counts ions, not the number of nearest neighbours. A counterion is the oppositely charged partner needed to balance a charged species; its identity can change solubility and other properties without changing the identity of that species.[ref]
Strong acid Created 2026-10-13 Updated 2026-10-20
In water, a strong acid transfers its available proton essentially completely to water under the dilute conditions considered here. For the pH example, each initial chemical acid unit supplies one hydronium ion. “Strong” describes this conversion, rather than a high concentration. See 14.3 Relative Strengths of Acids and Bases.
Strong electrolyte Created 2026-10-13 Updated 2026-10-20
A strong electrolyte yields essentially all ions from its dissolved substance in the specified solvent and conditions. Strength does not specify concentration.
For dissolved sodium chloride in dilute water, one dissolved formula unit supplies one sodium cation and one chloride anion. For hydrogen chloride in water, ions instead arise by proton transfer to the solvent, giving hydronium and chloride. Thus separating existing ions by dissociation of an ionic compound and producing ions from neutral molecules by ionization can both give a strong electrolyte.[ref]
The denominator in “essentially all” is the dissolved inventory. Solubility asks how much enters the chemical solution; electrolyte strength asks what happens to the part that enters. A sparingly soluble ionic compound can therefore have an essentially fully dissociated dissolved portion. Undissolved solid does not count as neutral dissolved chemical species, and low electrical conductivity alone does not establish a weak electrolyte.[ref]
Figure 1.
Electrolyte strength and dissolved amount of substance answer different questions
. Original schematic inventories in equal volume of a specified solvent. Each symbol represents the same chosen amount of substance, not one literal microscopic sample. A two-unit strong electrolyte inventory produces two cations and two anions; a twenty-unit weak electrolyte inventory with a stipulated one-quarter converted fraction produces five of each ion and fifteen neutral units. A twenty-unit nonelectrolyte inventory remains neutral. The solvent and its background ions are omitted. These are chosen inventories, not measured material data. Details.
The diagram's weak electrolyte has the smaller converted fraction but more ions in the same volume: ten charged symbols versus four. Even at equal total ion concentrations, different ion drift velocities can give different electrical conductivities. Strength is useful for predicting dissolved chemical species in chemical equations; concentration and transport properties are additionally needed to predict electric current.
An inspected motivating experiment is Harvard Natural Sciences Lecture Demonstrations' Conductivity of Solutions by Harvard Natural Sciences Lecture Demonstrations, Setting it Up. Separate labeled beakers hold aqueous sodium chloride, sucrose, acetic acid and hydrochloric acid samples specified at , with about in beakers; distilled water supplies a blank. Metal electrodes enclosed in tubing connect to a lamp. The readout is lamp brightness; the page reports that an ionic chemical solution lights the lamp. A separate deionized-water rinse station limits carryover between samples.[ref]
For a controlled interpretation, keep electrode spacing and immersed area fixed, compare at the same temperature, and recheck the blank after rinsing. These are additional controls: the page supplies no numerical electrode geometry, temperature or calibration. Brightness supports the presence of mobile ions; it cannot alone measure the converted fraction because concentration, ion mobility and circuit response also matter. Its classification of insoluble compounds as weak should not replace the dissolved-inventory distinction above.[ref]
Strontium 2026-10-20
An alkaline-earth element whose divalent ions can substitute for calcium in suitable crystal hosts. Radioactive strontium isotopes are relevant fission-product constituents.