Rotational order 2026-11-05
A rotational order expresses a signal’s frequency relative to a specified reference shaft’s rotational frequency:
Thus means one oscillation per reference revolution and means one oscillation per two reference revolutions. A rotational order is dimensionless and need not be an integer. It is especially useful when a machine changes speed: a shaft-synchronous feature can keep the same rotational order while moving through many frequencies in an ordinary frequency spectrum.[ref]
The reference is essential. Suppose shaft A turns at and shaft B at . The same signal has rotational order relative to A and relative to B. Changing the reference has changed the dimensionless label, not the measured vibration. Likewise, a 24-tooth gear turning at has a gear mesh frequency of . Its mating 8-tooth gear turns at , giving the same gear mesh frequency but rotational orders and relative to the two shafts.
For a component with unwrapped phase and reference angle , the instantaneous version is
where the reference angular velocity is nonzero and both angles use the same units. A constant rotational order gives . This explains why angular resampling makes a speed-following component periodic as a function of shaft angle. A vibration fixed at instead changes from rotational order to when the reference shaft accelerates from to .
An order tracking measurement therefore pairs a vibration sensor, such as an accelerometer, with a shaft-angle or speed reference, such as a tachometer. An order peak identifies a speed relationship; it does not by itself establish which part is damaged. A resonance can greatly change the amplitude as speed changes even when the excitation’s rotational order stays fixed.
If the otherwise force-free second sphere is held against rotation, its angular velocity relative to the incident fluid is . The rotlet reflected back to the first sphere adds
This follows by evaluating the rotating sphere in Stokes flow at displacement and using the vector triple-product identity. The holding couple does no work because the held sphere's angular velocity is zero.
Sagnac area law 2026-10-18
For a rigidly rotating prescribed vacuum path, use spatial coordinates attached to the apparatus and laboratory time . At a path point , the local apparatus velocity is . A light displacement has instantaneous laboratory displacement , up to the common rotation of the spatial axes. The null condition is therefore
Write . To first order in , the positive root is
Reversing the path reverses the dot product term but leaves the leading path-length term unchanged. Subtract the two return times and use the scalar triple product identity:
This is a line integral version of the Sagnac area law; the vector area identity also follows from Stokes theorem. For a mirror-defined polygon the actual ray paths move slightly as the mirrors rotate; the stationary optical path at zero rotation gives the same first-order result. The prescribed-path calculation is an idealization, not an exact finite-speed formula for every moving-mirror layout.
The dot product explains the geometry: only the projection of the oriented vector area along the angular velocity contributes. A planar loop whose normal vector is perpendicular to has zero leading delay. For repeated traversals with the same orientation, the signed vector areas add; oppositely oriented lobes can cancel even when the total unsigned area is large. Equal perimeter alone does not imply equal response. A constant translational velocity contributes nothing to this leading closed-path line integral, since .
Sagnac effect 2026-10-18
The Sagnac effect is a difference in return times, or an associated interference fringe displacement, for light sent in opposite directions around a closed optical path in a rotating apparatus. The light leaves one beam splitter, travels around the same loop in opposite senses, and returns to the rotating beam splitter and readout. For a slowly rotating apparatus in flat spacetime, the leading laboratory arrival-time difference is
Here is the vacuum speed of light, is the apparatus's angular velocity relative to an inertial frame, and is the vector area oriented by the chosen positive direction around the closed curve . With positive rotation about the upward normal vector, the counterclockwise beam is labelled and arrives later. Reversing rotation, or reversing the orientation convention alone, changes the sign of .
The surprise is that a small loop can reveal its rotation by comparing two beams locally, even though each local vacuum speed of light measurement gives . A rotating reference frame is not a single inertial frame: a beam must catch the moving receiver after a full circuit. The Sagnac area law makes this difference a practical way to measure angular velocity, while the Relativistic Sagnac delay on a circular ring distinguishes laboratory coordinate time from the receiver's proper time.
For a stationary rotating apparatus driven by a source with optical coherence and proper frequency , define . The source wave phase advances by between the emission times of the two contributions that meet at one readout spacetime event. Define the signed phase lag of the contribution and the corresponding displacement in units of one interference fringe by
The sign of a photographed spatial displacement also depends on the imposed fringe orientation; this definition fixes the theoretical sign through the delayed beam. In an equal-amplitude output, a representative light intensity is , where sets the chosen spatial interference fringe spacing . Moving by shifts the pattern by one fringe. A fixed output exactly at a bright or dark fringe has zero first-order intensity slope, so a known phase bias or a spatial fringe readout is useful for determining a small signed delay.
Choose a square of side , a rectangle by , and , with angular velocity parallel to the positive normal vectors. Both perimeters are , but the areas are and . Using , the leading predictions are
These are original model choices and predictions, not measured points. The square has times the response despite the equal path lengths. Reversing from to gives : the displacement magnitude between opposite rotations is twice the displacement magnitude from rest. Confusing these two comparisons introduces a factor-of-two error.
Figure 1.
Independent path-segment calculation of the predicted fringe displacement for two equal-perimeter loops
. The generator sums along each straight segment, rather than inserting the enclosed area into the answer. Both loops are oriented counterclockwise. Lines and marked values are leading-order vacuum model predictions; no historical measurements are plotted. Details.
In 1913 Georges Sagnac mounted a lamp, collimator, beam splitter, four mirrors and photographic plate on a horizontal rotating platform. The mirrors defined a closed polygon; the two beams traversed it in opposite senses. A slight beam splitter adjustment produced visible interference fringes. A motor brought the platform to steady rotation, and switching the lamp exposed the plate. Comparing opposite senses of rotation revealed a reversing displacement. Changing the beam splitter adjustment supplied a further check against optical deformation. The report compared measured and calculated displacements. Georges Sagnac interpreted this as evidence for a luminiferous aether; the relativistic derivation below reproduces the delay without that hypothesis.[ref]
The readout measures a relative wave phase, not two stopwatch readings separated by an optical transit time. Reversal isolates a contribution odd in angular velocity: if a signed interference fringe position is to leading order, then cancels the fixed offset . Changes of alignment or temperature correlated with reversal can survive this subtraction. Thus the experimental inference concerns a reproducible rotating-loop phase difference, with controls for disturbances; it is not by itself a unique test of an underlying propagation hypothesis.
Screw pitch (mechanics) 2026-11-05
The screw pitch of a rigid-body twist is its signed axial translation per unit rotation angle about the instantaneous motion axis. For angular velocity and linear twist component in the same reference frame,
The units are length per radian. This mechanics convention differs from using the word pitch for an axial distance per complete revolution.[ref]
To derive the formula, write the instantaneous velocity field as . At a point on the instantaneous axis, the velocity is parallel to , so . Taking its scalar product with removes the cross-product term and gives the displayed result. A suitable closest axis point is
which verifies directly.
Although depends on the chosen origin, does not. Translating that origin by replaces by ; the added term is perpendicular to . A common rotation of the coordinate axes preserves the scalar product and the norm as well. Multiplying the entire rigid-body twist by a nonzero scalar changes the motion rate but preserves .
For an original mechanism with constant axial advance per full turn,
At five revolutions per second, and the axial speed is . The advance per revolution is , which corresponds to screw lead. In a multiple-start screw thread, the spacing between neighbouring threads need not equal that lead, so a thread's engineering pitch must not silently replace the twist parameter.
When and , the instantaneous motion is pure rotation about an axis, even if points away from that axis have nonzero linear velocity. When and , the motion is pure rigid-body translation and the displayed quotient is undefined; an infinite-pitch convention can describe that limiting case. A finite nonzero constant pitch produces a screw motion, with off-axis point paths following helices.
Secular tidal torque 2026-10-14
A secular tidal torque is the torque remaining after averaging the changing tidal interaction over fast orbital and rotational motion. The misaligned tidal deformation lets the companion's gravity change the spin angular momentum; the orbit receives the opposite torque. Tidal dissipation converts mechanical energy into heat, while total angular momentum is conserved in an isolated system. Thus the spin-orbit coupling exchanges angular momentum rather than destroying it. [ref].
For intuition near synchronous rotation on a circular orbit, hold mean motion and moment of inertia fixed and adopt the illustrative linear dissipative law
Here is spin angular velocity, is a marked surface direction in an inertial frame, and is a response coefficient, not a universal material constant. A faster spin is slowed and a slower prograde spin is accelerated. The solution and the associated mechanical power loss are
The orbital contribution to this power is , and the spin contribution is ; their sum becomes heat. Holding fixed is a local approximation to the coupled evolution. Actual secular tidal torque depends on the deformation response and orbital eccentricity, so this simple law does not establish which spin-orbit resonance an eccentric body captures into.
For a spherical pendulum with nonzero conserved vertical angular momentum , eliminate the azimuthal angular velocity using . The polar effective potential is . A conical pendulum at is a minimum satisfying . Linearization at fixed yields polar angular frequency , where is the conical revolution frequency squared. Holding fixed during the perturbation would describe a different, externally driven constraint. The polar perturbation is a nutation; the exactly planar limit requires separate treatment.
Solid-body rotation Created 2026-10-06 Updated 2026-10-07
In solid-body rotation the angular velocity is independent of distance from the rotation axis, so tangential speed is proportional to cylindrical radius. A galactic region with this galaxy rotation curve has radial epicyclic frequency .
Spin-orbit resonance 2026-10-14
A prograde spin-orbit resonance relates mean spin angular velocity to mean motion by a ratio of small positive integers, : the body makes turns in orbital periods. Synchronous rotation is ; Mercury's spin-orbit resonance is nonsynchronous. The relevant combination of spin and orbital angles must stay bounded around a preferred orientation, not merely have a near-integer frequency ratio. For an elongated body on an eccentric orbit, the companion's gravitational torque on the permanent shape can sustain the resonance while tidal dissipation permits capture. [ref].
Spin-rotation coupling 2026-10-18
The spin-rotation coupling contribution to a rotating-frame Hamiltonian couples angular velocity to angular momentum. When discussing spin alone, identify which part of the total angular momentum enters the effective model.
Spur gear 2026-11-05
A spur gear is a cylindrical gear with straight teeth parallel to its rotation axis. A conventional external pair transmits motion between parallel axes. Unlike the inclined teeth of a helical gear, the ideal straight-tooth geometry produces no axial thrust from the tooth-normal contact force; there are still tangential and separating loads that the mounting must carry.[ref]
For compatible spur gears, reference diameter is , where is gear module and is tooth count. Standard reference axis separation is . Two external spur gears have signed angular velocity relation : they rotate in opposite directions. Matching gear module alone is insufficient; tooth profiles and gear pressure angles must also be compatible.
For an original example, take gear module and tooth counts 20 and 60. Reference diameters are and , so standard axis separation is . Driving the smaller spur gear at revolutions per minute gives the larger one revolutions per minute in the opposite direction. In a steady ideal transmission, an input torque of becomes at the output. The corresponding input gear tangential force is ; multiplying this same force by the output reference radius recovers the output torque.
A simple bench demonstration marks one tooth on each spur gear and counts complete turns, testing the three-to-one gear ratio. Measuring transmitted torques and rotational speeds additionally tests gear efficiency. Observing the rotation ratio alone cannot establish a tooth's allowable load or the losses caused by friction and backlash.
State variable 2026-11-05
A state variable is a coordinate used to describe the instantaneous condition of a dynamical system sufficiently completely to determine its future evolution under a specified model and input. For a simple pendulum, its angle and angular velocity form a state; angle alone generally does not, because the same position can be traversed in either direction.
A second-order ordinary differential equation becomes a first-order system by setting : and . The choice of state variables therefore reflects the memory required by the model, and differs from merely listing measured outputs.
Static friction Created 2026-10-05 Updated 2026-10-14
Static friction is the tangential contact force that maintains zero contact slip. “Static” describes the contact state: both surfaces can move together in the chosen inertial frame. In the ideal dry-contact model, the actual static friction adjusts to the equations of motion, subject to a bound, rather than always taking its maximum value.[ref]
Here is the magnitude of the normal force and the coefficient of static friction. Equality means limiting static friction; it is a threshold, not an instruction to replace every unknown contact force by .
For a stipulated example, place a nonrotating block initially at rest on a stationary horizontal surface. Take gravitational acceleration and coefficient of static friction , with no other vertical force. The vertical force balance gives , so the largest allowed static friction magnitude is . Choose right as positive and apply a horizontal force . Remaining at rest requires Newton's second law to give
At , the static friction is ; at , it is . Both states have zero acceleration. At , balancing would require , outside the bound, so this initially resting block cannot remain at rest. Its subsequent acceleration requires a kinetic friction law; setting after contact slip begins would still use the wrong contact state. At exactly , the ideal inequality still permits rest at the threshold. These are model calculations, not measured material properties.
Figure 1.
Static friction adjusts to the applied force within its admissible bound
. Original signed horizontal model for the stipulated block: the shaded band is the allowed static friction, the solid line satisfies force balance, and the dashed line shows the demand outside that band. The crossed points at are impossible static demands, not sliding forces. Details.
The toy model used in kinetic friction makes the contact-state distinction explicit: , , and coefficient of kinetic friction . On stationary ground, an initially resting box pushed right with has . At it cannot remain at rest; once it slides right, and . At , rest is allowed with , whereas an already right-sliding box has and . The applied force alone does not specify the friction branch: contact slip and motion history matter.
For a flat contact with two tangential directions, the bound applies to a vector norm, not separately to each component:
For the stipulated bound, balancing horizontal components and requires a force magnitude , which is allowed. Components and require , which is forbidden even though each component separately is below . This circular bound assumes the same coefficient of static friction in every tangential direction. Near impending contact slip, the limiting static friction opposes the relative contact motion that would otherwise begin. Once actual contact slip exists, kinetic friction instead opposes its tangential relative velocity, which need not have the direction of the body's center of mass motion.
The normal force must also come from the equations of motion. On horizontal ground, an upward pull of magnitude at angle above horizontal gives, for a block remaining at rest with no other forces,
The sine component unloads the contact and the cosine component demands tangential support. These equations require ; if the supporting contact opens, this dry-contact model cannot supply a negative normal force. For the stipulated block and , the positive threshold is , with and . A downward pull increases instead. An inclined plane gives another reason why is not always .
To solve a new problem, impose zero contact slip, find the required static friction and normal force from the equations of motion, then check the bound. A demand inside it permits that contact state; a demand outside it rules the state out. For an ideal driven tire undergoing rolling without slipping on stationary ground, a forward static friction can accelerate the vehicle. Its role is to prevent contact slip, rather than to oppose all motion of the whole body.
Nor does the word “static” by itself make friction do zero work. The contact power delivered to a body is , a dot product with its material contact-point velocity in the chosen inertial frame. At an ideal contact undergoing rolling without slipping on stationary ground, , so this power is zero. For a rigid body, adding the translational and rotational contributions gives , where is the contact torque about the center of mass and its angular velocity. Counting only the first term omits the rotational contribution.
At a moving contact with zero contact slip, the two material contact points share a velocity that can be nonzero. For instance, a nonrotating block moving with an accelerating belt receives positive contact power when the belt's rightward velocity and rightward static friction are positive. The belt receives by Newton's third law. These contact contributions sum to zero in the ideal no-slip model, while the block's kinetic energy can increase. Zero contact slip and zero work on each body are different conditions.
Use the rotating frame and positive gyromagnetic ratio convention of free induction decay. Let be each component's fixed detuning, and normalize its magnetization by the equilibrium value. An instantaneous resonant pulse along rotates through about , preparing . A second pulse along rotates through about . These ideal pulses require a drive much stronger than the relevant detunings and negligible relaxation during either pulse. The corresponding rotation matrices, acting on column vectors, are
Here is free Larmor precession in the rotating frame, before including transverse relaxation. Define a calibrated complex signal so the prepared component has . The pulse sends to its negative complex conjugate, hence sends to . Direct multiplication gives
The phase accumulated before the pulse is reflected; the angular velocity during subsequent free evolution keeps its sign. At every fixed detuning has zero residual phase. Equivalently, , so . This is not the identity on arbitrary three-dimensional magnetization: it returns the prepared component because . The two transverse pulse axes specified here also fix the receiver sign of the echo.
Figure 1.
How a 180° pulse refocuses a static spread of Larmor precession frequencies
. Original Bloch vector projections and accumulated phases for five illustrative detunings, with no relaxation. A rotation about prepares ; a rotation about reflects transverse phases at . Colors identify the same components throughout. Their subsequent free angular velocities are unchanged. Details.
For an original ensemble example, let the static detunings have a Gaussian distribution with mean zero and standard deviation , independent of a common homogeneous . Averaging uses the characteristic function of that Gaussian distribution:
Choose , and . Immediately before the refocusing pulse the normalized signal is only , yet . A one-pulse free induction decay at 80 ms would instead be about . These chosen numbers describe a calculation, not a measured trace. Increasing narrows the echo without changing in this ideal model. Because this Gaussian distribution produces a Gaussian factor rather than an exponential decay, its inhomogeneous decay is not characterized by a unique exponential .
Figure 2.
Synthetic Gaussian distribution ensemble: a vanished free induction decay and a recovered spin echo
. Left: the stated instantaneous and sequence, ensemble magnitude, one-pulse comparison and homogeneous envelope. Direct sums over weighted detunings agree with the analytic curve. Right: samples at exact refocusing times for a series of separate sequences, with and without the diffusion model below. No panel reproduces an experimental trace. Details.
The exact phase-refocusing time is . A slowly falling transverse relaxation envelope moves the maximum of this particular echo shape slightly earlier: differentiating after the pulse gives , or here. Measuring consistently at avoids confusing this small envelope effect with a failure of refocusing. A series of such measurements gives only when the assumed homogeneous exponential decay, pulse quality and negligible additional attenuation are appropriate.
Stellar bar Created 2026-10-25 Updated 2026-11-05
An elongated nonaxisymmetric stellar structure in a galaxy, often approximated as a rotating perturbation of an axisymmetric or spherical gravitational potential. Its pattern angular velocity need not equal an individual star's orbital angular velocity. The Galactic bar is the particular example in the Milky Way.
Steven A. Balbus 2026-11-05
Steven A. Balbus, working with John F. Hawley, established the astrophysical importance of the magnetorotational instability in weakly magnetized accretion disks. Their local linear stability analysis identified an instability associated with outward-decreasing angular velocity, even where the unmagnetized flow would pass the Rayleigh centrifugal stability criterion.[ref]
The result offered a route from differential rotation to fluid fluctuations and outward angular momentum transport, allowing gas to accrete without attributing the transport to molecular viscosity alone.
For a forced sphere and a distant equal force-free, torque-free sphere, the leading incident Stokeslet strain is proportional to . Its reflected stresslet is axisymmetric about the line of centers and has zero vorticity on that line. The nominal fifth-order self-spin coefficient therefore vanishes. Finite-size incident-strain corrections and higher force-free scattering multipoles first supply a generic seventh-order angular velocity. Purely longitudinal forcing has zero spin exactly by axial symmetry. The leading translation correction is fourth order for a generic orientation, but sixth order for purely transverse forcing. These cancellations matter when using the method of reflections for Stokes flow to infer orders from far-field decay alone.
S. Widnall Created 2026-10-13 Updated 2026-11-05
An engineering educator whose joint lecture on rigid body dynamics explains how a body’s shape enters its rotational equations through the inertia tensor. Integrating products of position coordinates over the mass distribution supplies the tensor components. Choosing principal axis directions then removes the cross terms, making the relationship between angular velocity and angular momentum easier to interpret.[ref]