Take counterclockwise traversal as viewed from . In the plane , the work is the planar line integral of and . Green's theorem givesThe component contributes nothing because . The question specifies one circuit without specifying its direction: clockwise traversal gives .
Past exam of the mathematics course of the year 1 of the natural sciences course of the University of Cambridge 2003 Paper 2 9 b Solution Created 2026-10-18 Updated 2026-10-20
Differentiate at fixed pressure and subtract the heat capacity at constant volume:Now use and the multivariable chain rule along a constant-pressure path:Substitution cancels the fixed-volume derivative and gives the volume derivative form of the heat-capacity difference,For the ideal gas, the first term in brackets vanishes and , so . Consequently for the entire gas, with fixed particle number . The extra heat capacity accounts for expansion work at constant pressure.
The relevant claim concerns a machine that repeats its complete operating cycle while delivering a continuing net output of work without a corresponding supply of energy. A machine cannot supply net work in a cycle without taking in energy or depleting an energy store. This follows from conservation of energy, an experimentally supported physical law rather than a theorem of pure logic.
Let include the machine's internal energy, kinetic energy and potential energy. With the net heat received and the net work delivered, the first law of thermodynamics givesFor a complete cycle all stores return to their initial values, so and . If there is neither heat input nor another energy input, . A descending mass, unwinding spring, consumed fuel or discharged battery supplies energy, but it cannot be omitted from the accounting while calling the result perpetual motion.
Changing an overbalanced wheel's geometry does not evade the argument. A conservative force gives zero net work around a closed configuration cycle, while friction dissipates usable mechanical energy. Resetting a mechanism or returning a raised weight costs work that must be included.
Indefinitely continuing motion without useful output is a different possibility: an ideal frictionless oscillator or freely moving body need not stop. Connecting a load removes energy and changes that situation. A cyclic machine supplied with heat from only one reservoir and converting all that heat into work is excluded instead by the Kelvin-Planck statement of the Second law of thermodynamics. The first-law and second-law objections address different proposed energy balances.
Arterial recoil, the muscle pump, respiratory movements, venous tone and the mechanics of cardiac filling assist blood circulation. The heart remains its principal continuing source of mechanical energy. These agencies differ in whether they store cardiac work, contribute new muscular work, or direct flow without supplying power.
During ventricular systole, the aorta and other large elastic arteries expand and store elastic potential energy. During diastole, their recoil continues to drive blood towards the peripheral vessels, while closure of the aortic valve limits return into the heart. This elastic reservoir smooths an intermittent cardiac input into a more continuous downstream flow. It does not manufacture extra energy: it releases part of the work performed during the preceding ejection.
Contraction of surrounding skeletal muscles compresses veins. Venous valves favour displacement towards the heart and limit backward flow when the compression is released. Alternating contraction and relaxation therefore produces a muscle pump, especially useful for return from dependent limbs. The added work comes from the contracting muscles; valves guide the displacement but supply no power themselves. Persistent compression without refilling is not equivalent to a series of pumping strokes.
Spontaneous inspiration supplies another assistance. Descent of the respiratory diaphragm raises abdominal pressure while expansion of the thorax lowers intrathoracic pressure. The resulting changes favour a pressure gradient towards the thoracic veins and right side of the heart. The effect depends on posture, the respiratory phase and whether vessels remain open. Positive-pressure inflation does not reproduce the same pressure changes as spontaneous inspiration.[ref]
Venous smooth muscle can reduce the storage capacity of peripheral veins, transferring blood towards the central circulation. This changes the volume available for cardiac filling; it does not require a travelling wave of venous peristalsis. Relaxation and recoil of the heart, together with movement of the atrioventricular plane, also influence filling pressures. The older expression cardiac suction is therefore best interpreted through specific changes of chamber volume and pressure, rather than a separate force pulling uniformly through every vessel.
Gravity assists a downward column and opposes an upward one. For a complete circuit returning to its initial height it supplies no net gravitational work. Its important effects include hydrostatic pressure differences and dependent pooling. Likewise, the residual pressure gradient across the capillaries is chiefly the downstream consequence of the cardiac pump. Ordinary capillary action at a liquid meniscus is not a universal extra pump inside a closed, fluid-filled vascular network. Local vasodilation can improve perfusion by reducing vascular resistance, but it does not create the necessary pressure source.
With the mean volumetric flow rate, an effective vascular resistance, and the driving pressure difference, the useful bookkeeping relation isIt separates an increase of driving pressure from a reduction of resistance. An instructive apparatus compares the outflow of a pulsatile pump through rigid tubing with its outflow through an elastic reservoir feeding the same resistance. Continued outflow between strokes demonstrates stored elastic potential energy. A separately compressed valved flexible tube demonstrates the additional muscle pump principle. Neither observation requires a mysterious attraction of blood by the tissues.
For the historical laboratory context, intense heating could be obtained from an electric arc between carbon electrodes and from an oxyhydrogen flame. The first converts electrical work into a very hot emitting region; the second releases chemical energy rapidly in combustion. An intense light or an ability to melt a particular solid establishes a useful physical effect, but does not by itself provide a calibrated numerical temperature.
The cold end could be reached by rapidly evaporating a volatile material and reducing the surrounding pressure. In Faraday's carbon-dioxide and ether cooling experiment, a bath of solid carbon dioxide and diethyl ether was placed under an air-pump receiver. Removing vapour promoted further cooling. Faraday's 1845 report gives an alcohol-thermometer reading near in the atmospheric-pressure bath and , approximately , under reduced pressure. He explicitly noted thermometer lag, thickening alcohol and possible errors of several Fahrenheit degrees. These are dated reported estimates, not a claim to a modern cold-temperature record.[ref]
On the Liquefaction and Solidification of Bodies Generally Existing as Gases by Michael Faraday. 1845, printed p. 158: reduced-pressure bath, alcohol-thermometer graduation and uncertainty
Measurement must be separated from temperature production. A liquid-in-glass thermometer works only while its liquid, glass and graduation remain usable. A gas thermometer infers temperature from reproducible gas pressure or volume changes, with calibration and departures from ideal-gas behaviour accounted for. At high temperatures, suitable expansion or calorimetric pyrometers can be compared against known points, but material changes and extrapolation introduce error. For example, transferring a hot body of known thermal properties into a calorimeter estimates its starting temperature only after allowing for its heat capacity and heat lost in transfer. The very hottest arc regions are not safely assigned the reading of an ordinary mercury thermometer.
Faraday's published lectures demonstrate the carbon-electrode electric light and electrical heating of platinum. They provide contemporary apparatus context; the later reprint's date is distinguished in its bibliography entry.[ref]
On the Various Forces of Nature by Michael Faraday. Lecture VI, carbon points and the heated platinum bridge
The strong evidence is the reproducible conversion between mechanical work and thermal changes. In Joule's paddle-wheel experiment, descending masses drive vanes in a liquid, and a measured input of mechanical energy produces a measured rise in temperature. Allowing for the vessel and thermal losses gives a quantitative mechanical equivalent. Sustained frictional heating, including Rumford's cannon-boring experiment, also challenged a simple account in which rubbing merely released a fixed stored supply of a material heat fluid.[ref]
On the Mechanical Equivalent of Heat by James Prescott Joule. 1850, friction experiments and calorimetric corrections
Electrical and compressional experiments reinforce the connection. A resistor warms under Joule heating, with electrical input . A gas compressed with little heat transfer can rise in temperature, showing that mechanical work can increase its internal energy. Conversely an expanding gas can perform work while cooling. Such experiments connect several kinds of change through a conserved energy balance.
The kinetic theory of gases supplies a microscopic model. Translational molecular motion produces momentum transfer to walls; for a dilute monatomic ideal gas,Thus increasing molecular kinetic energy is reflected in temperature and pressure changes. These formulas describe a specified model, not a proof that every substance's internal energy consists only of translational motion. Rotations, vibrations and intermolecular potential energy also matter.
In modern terminology, heat is energy transferred because of a temperature difference. The body has internal energy, and microscopic motion accounts for part of it. Calling heat “a form of motion” captures the historical rejection of a conserved material caloric, but should not obscure that distinction between stored energy and an energy-transfer process.
With the electrodes disconnected, the copper has no sustained external route through which to receive electrons from the zinc. It is not appreciably attacked by a clean, dilute nonoxidizing sulfuric acid solution. Zinc can in principle reduce acid while dissolving, but amalgamation suppresses much of the local action associated with impurities and promotes a high kinetic barrier for hydrogen evolution on the amalgamated surface. Thus the intended historical observation is little visible action with the circuit open, not a thermodynamic assertion that zinc cannot react with acid.
Closing the external wire supplies an electron path. At the zinc anode,at the copper cathode,The net redox is thereforeThe zinc dissolves, and bubbles of hydrogen appear chiefly at the copper. Electrons flow through the wire from zinc to copper; conventional electric current flows oppositely there. Ionic transport through the electrolyte completes the circuit and prevents indefinite charge accumulation in the solution. The copper primarily provides a conducting surface: there is no stipulated copper-ion solution from which metallic copper must be deposited, so this is not the Daniell cell reaction.
The chemical energy supplies the electrical work. Accumulation of hydrogen and changing interfacial conditions can polarize the cell, reducing the current. A complete description therefore distinguishes the initial closed-circuit response from an indefinitely constant-current idealization. Electrochemical overpotential explains why a favorable reaction and its observable rate are different questions.
A lever is a body free to rotate about a fulcrum. Its usefulness comes from a balance of torques, not from producing energy. For a stationary ideal lever, let and be the perpendicular lever arms of the effort and load . ThenThe mechanical advantage uses perpendicular distances to the lines of action, which need not equal distances measured along a bent or obliquely loaded arm. In an ideal slow motion, the effort moves through the larger distance when its force is the smaller: work is conserved.
For the three familiar straight arrangements, the fulcrum lies between effort and load in a first-class lever, the load lies between fulcrum and effort in a second-class lever, and the effort lies between fulcrum and load in a third-class lever. The second class has ideal mechanical advantage greater than one; the third has it less than one. The first can have either, depending on the lever arms.
The forearm bends by elbow flexion. The biceps brachii and brachialis pull through short tendons close to the elbow, while a load in the hand acts farther away. This is predominantly a third-class arrangement: a large muscle force buys a comparatively large and rapid hand displacement. The biceps brachii also contributes to forearm supination. Elbow extension is produced chiefly by the triceps brachii, whose tendon acts on the olecranon behind the elbow. The extensor insertion and forearm load lie on opposite sides of the effective pivot, giving the corresponding first-class analogy. Actual anatomical joint motion has changing muscle moment arms, and the joint reaction force also enters the full force balance; the body is not a set of frictionless pins. [ref]
For direct conversion, descending masses can drive paddles in an insulated vessel of water. Measure the lost gravitational potential energy and the temperature rise, including the vessel's heat capacity and corrections for unwanted heat transfer. Repeated reversal of the paddles and fixed baffles inhibit simple bulk co-rotation, directing more of the input towards dissipative fluid motion. Joule's paddle-wheel experiment tests a quantitative mechanical-to-thermal balance, rather than merely observing that stirring can warm water.[ref]
On the Mechanical Equivalent of Heat by James Prescott Joule. 1850, friction experiments and calorimetric corrections
For conversion through electricity, mechanical work drives a generator, whose electric current passes through a resistor in a calorimeter. The measured electrical input is , or for constant electric current and electrical resistance. Joule heating increases the internal energy of the resistor and surrounding water. Compare the generator's mechanical input with the total thermal gains, including generator and circuit losses if the system boundary contains them. A battery alone demonstrates electrical-to-thermal conversion; without accounting for a mechanically driven source it does not establish the requested mechanical intermediate chain.
Using the given value relative to water, the copper requiresWith the modern thermochemical calorie, , so the ideal required work isEquivalently it is about using standard gravity. A nineteenth-century numerical equivalent of heat could give a slightly different rounded result. The stipulated constant specific heat capacity is used here; an unprovided vessel heat capacity and environmental losses would add to the required input.
The defensible core of William Odling's statement is a transfer of energy: sunlight helps build reduced food material, and its subsequent oxidation can supply animal heat and work. Here solar force means solar energy, and eremacausis means slow oxidation, rather than a special vital agent. The historical wording, from his 1866 lectures, must be qualified where it identifies the fuel with the substance of the working muscle or contrasts plant and animal metabolism too absolutely.[ref]
Lectures on Animal Chemistry by William Odling. Lecture IV, discussion of solar energy and animal oxidation; see also the concluding recapitulation
In oxygenic photosynthesis, light absorbed by chlorophyll supports conversion of carbon dioxide and water into reduced organic material, with release of oxygen. An overall account, written for one glucose unit, isThis summarizes several stages, rather than describing a single elementary chemical reaction. The evolved oxygen comes from water. The product can furnish starch, other carbohydrates and precursors for fat and protein; the latter additionally requires a source of nitrogen. A human obtains these materials directly from plants or through animals that have eaten plants. Thus a grain meal and the flesh of a grain-fed animal can trace much of their chemical energy to the same original sunlight.[ref]
8.1 Overview of Photosynthesis. Main Structures and Summary of Photosynthesis; photosynthetic products and their passage through food chains
The reverse overall balance for complete aerobic utilization of glucose isSimilarly a representative fatty acid, palmitic acid, has the complete oxidation balanceBoth equations conserve each chemical element. The relevant energy difference belongs to the complete set of reactants and products, including oxygen; merely breaking a bond does not supply net energy. In modern terms, controlled cellular respiration couples part of the available chemical free energy to ATP formation. ATP hydrolysis can then support muscle contraction, active transport and biosynthesis; some energy is transferred to heat. The process occurs through enzyme-mediated steps, without a flame, although complete combustion in a calorimeter can help measure the corresponding chemical energy change.
Glands and muscles continually replace constituents, and their proteins can be degraded. Amino acids can contribute carbon skeletons to energy metabolism, while their nitrogen is disposed of largely as urea. But ordinary muscle contraction does not require proportional destruction and rebuilding of the contractile protein at every stroke. Carbohydrates and fats are major fuels for muscle, and a gland can use those fuels to support secretion. The historical picture of burning the organ's own substance is therefore an inadequate general explanation.[ref]
This correction was already an experimental issue before the exam. Edward Frankland's 1866 discussion compared the mechanical work of climbing with the energy that could be assigned to protein destruction estimated from urinary nitrogen. The latter was insufficient to account for all the work. His combustion measurements also distinguished the heat from burning a sample completely from the smaller amount available when nitrogenous material leaves the animal as still-combustible urea. Measuring external work, urinary products and calorific values gives the hypothesis a quantitative test; it is more informative than simply pointing out that an active animal gets warm.[ref]
On the Source of Muscular Power by Edward Frankland. pp. 394–395, criticism of tissue-consumption doctrine; pp. 401–406, calorific measurements and comparison with climbing work, 1866
Finally, plants themselves carry out cellular respiration, and not every ecosystem obtains its input from sunlight: chemolithotrophy is an alternative. The plant-animal contrast is useful for following energy through an ordinary food chain, but it is not an exhaustive division of biochemical capabilities. Conservation of energy also requires the bookkeeping formfor an idealized interval in which is the metabolizable food input, with energy lost in excreta already subtracted and other material-energy exchanges neglected. Here is external work, is net outward heat transfer, and includes changes in stored chemical and other energy. The living body transforms energy; it does not create it.
The heart supplies the principal continuing mechanical input to blood circulation; arterial recoil, respiratory movements and the action of skeletal muscles redistribute and supplement that input. They have different sources of energy and should not all be called independent propulsive powers. The pressure gradient remaining after passage through the capillaries is still a consequence of the upstream pump.
Arterial elasticity. During ventricular systole, ejected blood expands the aorta and large arteries, storing elastic potential energy in their walls. During diastole, recoil continues to drive blood into the peripheral vessels while closure of the aortic valve limits return towards the heart. This reduces the intermittency of flow downstream. The recoil is a temporary store of cardiac work, rather than a fresh source of energy. A vessel that is too rigid provides less of this smoothing; a compliant vessel with an open backward outlet would not provide the same useful result.
The skeletal-muscle pump. Contracting skeletal muscles compress adjacent veins. Venous valves make the displacement preferentially towards the heart; when compression ceases, refilling permits another stroke. Walking therefore aids return from dependent limbs. The source of the added work is muscle contraction, and the valves guide it without producing energy. Merely possessing valves cannot make a stationary column circulate.
The respiratory pump. During inspiration, falling intrathoracic pressure and displacement of the abdominal contents favour a pressure gradient from abdominal and peripheral veins towards the thoracic veins and right side of the heart. The respiratory diaphragm thus participates indirectly in venous return as well as pulmonary ventilation. The exact flow varies with posture, vessel collapse and the phase of the respiratory cycle; positive-pressure inflation does not reproduce the same mechanical circumstances as spontaneous inspiration.[ref]
Venous tone and cardiac filling. Sympathetic contraction of venous smooth muscle can reduce venous storage capacity and transfer blood towards the central circulation. This alters the volume available for filling rather than requiring a wave of venous peristalsis. Cardiac relaxation, recoil and movement of the atrioventricular plane also affect filling pressure. Some traditionally described cardiac suction is therefore a feature of the cardiac cycle and mechanical coupling, not a separate organ pulling blood through every vessel.[ref]
20.4 Homeostatic Regulation of the Vascular System. Neural Regulation of Blood Flow; sympathetic effects on vessels and venous return
Gravity and supposed capillary attraction. Gravity assists a downward column but opposes an upward one. In a complete circuit returning to its original height it supplies no net gravitational work; its important practical effects include hydrostatic pressure differences and dependent venous pooling. Ordinary capillary action in an open narrow tube, driven by a liquid meniscus, is not a general pump in a fluid-filled capillary network. Nor does a vague attraction of blood by tissues replace a measurable pressure gradient. Local vasodilation can increase perfusion by lowering vascular resistance, but that change does not manufacture the necessary pressure source.
For a simple mean-flow description, with the volume flow rate, the driving pressure gradient and the effective vascular resistance,This relation distinguishes a source of driving pressure from a change of resistance. In a lumped compliant arterial reservoir with vascular compliance and no inflow between beats, volume balance giveswhere is the downstream pressure. The exponential decay follows from stored volume leaving through the resistance. It explains continued flow during diastole without claiming that the idealization describes every reflected arterial wave.
A physical demonstration can compare a pulsatile pump feeding a narrow outlet through rigid tubing with the same pump feeding it through an elastic reservoir. Collecting the outflow over the pumping and resting phases reveals the reservoir's smoothing action; a side-arm manometer records its falling pressure. Separately compressing a valved flexible tube shows the role of a peripheral muscle pump. Keeping pump stroke and outlet resistance comparable prevents the apparatus from conflating a smoother flow with creation of extra energy.
For constant force and displacement , the work isFor a variable force, . The work-energy theorem explains this choice: Newton's second law for fixed mass gives . The component along the motion changes kinetic energy; a perpendicular force can change direction without doing work. Exerting a force on a stationary object likewise does no work on it.
Walking on level ground still requires muscular work. The centre of mass rises and falls during each step; the limbs gain and lose kinetic energy; and muscles perform positive work that replaces energy dissipated in impacts and tissue motion. Air resistance can add another cost. Returning to the same height makes the net change of gravitational potential energy zero, not every intermediate work contribution.
A thermoelectric generator maintains hot and cold junctions of two materials with different Seebeck coefficients. Mobile charge carriers redistribute in the temperature gradient, producing an open-circuit voltage of magnitude for constant coefficients. A load permits electric current; pairs of p-type and n-type legs are commonly connected electrically in series and thermally in parallel. Maintaining the output requires continuous heat transfer from the hot reservoir and rejection of heat to the cold reservoir. The thermoelectric figure of merit expresses the favorable combination of large Seebeck coefficient, large electrical conductivity and small thermal conductivity. Contact losses, Joule heating and parasitic heat leaks reduce practical efficiency.
A pyroelectric generator instead exploits a change of spontaneous electric polarization with temperature. If the relevant component of the pyroelectric coefficient is , an electrode of area receives a short-circuit electric current approximately . A heating stroke and a cooling stroke produce opposite charge changes. Rectification or a synchronized electrical cycle can transfer energy to storage. A spatial temperature difference drives the thermoelectric device; a temporal temperature change drives the pyroelectric device. Uniform, constant temperature gives no continuing current from pyroelectricity even if the material is hot. Reported nanowire generators deliberately use changing temperature, rather than infer continuous generation from a static hot specimen.[ref]
Pyroelectric nanogenerators for harvesting thermoelectric energy by Ya Yang and others. Nano Letters 12 (2012), pp.2833–2838, transient-temperature operating principle
Both approaches can be compact, silent and free of macroscopic moving parts. The thermoelectric generator gives continuous output under a sustained gradient, but needs two effective thermal contacts and sufficient heat flow; very small gives a small voltage and thermal contacts can consume much of the available gradient. Thin films exhibiting pyroelectricity can respond to intermittent heating without a permanently maintained hot/cold separation across their thickness, but require repeated thermal cycling, low electrical leakage and suitable charge extraction. Their thermal time constant limits useful cycling frequency, and sensible heating/cooling can dominate the heat budget. A steady hot pipe with an available cold sink favors a thermoelectric generator; periodic radiative heating can favor a pyroelectric generator. Neither converts equilibrium thermal motion at a single fixed temperature into sustained useful work.
The desired net process transfers copper from an impure anode to a purer cathode. In the idealized common-electrolyte approximation, both interfaces use the same /Cu equilibrium potential. Setting solid copper activities to one and interfacial ion activities equal gives V: subtracting two equal 0.34 V reduction potentials yields zero, rather than 0.34 V.
A strictly thermodynamic refining voltage need not be exactly zero. At equal dissolved-ion activity, the required reversible applied voltage isDilution of copper in the impure phase can therefore require positive reversible work. Weight percentage alone does not specify that phase's thermodynamic activity or impurity molar composition. The zero result is the intended pure-solid approximation, not a precise chemical-potential measurement from the stated weight purities.
In a galvanic cell, a spontaneous oxidation-reduction reaction supplies electrical work: for discharge, the anode is negative, and the cathode positive. A discharging electric battery and a hydrogen–oxygen fuel cell are two practical examples. The first stores its reactants internally; the second is supplied continuously with fuel and oxidant.
An electrolytic cell consumes externally supplied electrical work to drive electrode reactions or material transfer under an applied potential. Its anode is positive and cathode negative. water electrolysis for hydrogen production and metal electroplating are two practical examples. oxidation always occurs at the anode and reduction at the cathode in both cell types; the electrode signs change. The electrolyte conducts ions, while electrons flow through the external circuit. A rechargeable battery can operate in either regime depending on whether it is discharging or being charged.
For the rolling disk with a rim point mass, impose rolling without slipping and take the clockwise angular displacement from the configuration with the extra mass at the bottom. The disk centre has and . The extra mass hasThe disk's translational and rotational kinetic energies sum to . Including the rim mass givesThe exact Euler-Lagrange equation isTo first order, . ThereforeAt the bottom the extra mass is instantaneously at the contact point and has no first-order velocity. The increased effective inertia comes from the moving disk. Static friction enforces the rolling constraint without doing work at the stationary contact.
Let and . Incoming material has zero horizontal momentum, while incorporation requires horizontal momentum . Thus the engine supplies force , and its power isNo duration or loading distance is given, so a single total work cannot be assigned. Over an interval in seconds,The remaining becomes internal energy in the inelastic collision that brings the falling material to the wagon's horizontal velocity. Vertical falling kinetic energy, if any, is a separate contribution to dissipation; it does not alter this horizontal work balance. The source alternates between stone and coal; the calculation depends only on the given loading rate.
Use the angle from the vertical as the generalized coordinate. For a uniform ladder, its centre of mass is , so . Its central moment of inertia is . With ideal contact constraints that do no work, the Lagrangian, conjugate momentum, and Euler-Lagrange equation areRelease from rest at also gives by conservation of energy. These results hold while both contacts persist. The ideal wall reaction is normal to the wall; an unspecified tangential wall friction would require an additional generalized force and would prevent determination from the supplied data alone.
The external work equals the change in relativistic kinetic energy, . With ,The rest energy cancels between endpoints. At these speeds, the nonrelativistic estimate is close but slightly smaller.
Applying the same work-energy theorem at the higher pair of speeds givesThe identical increment now needs about two thousand times as much work. The growth follows from the rapidly increasing Lorentz factor near the speed of light.