W. C. Wiley 2026-11-05
W. C. Wiley worked on time-of-flight mass spectrometry at Bendix Aviation Corporation Research Laboratories. With I. H. McLaren, Wiley published a 1955 instrument study addressing the arrival-time spread of ions with the same mass-to-charge ratio. Their apparatus combined an ion-producing source, accelerating electric fields, an evacuated drift region and a collector; its analysis separated broadening from initial position and initial motion.[ref]
The basic timing principle can be derived without the focusing details. An initially stationary ion of positive electric charge accelerated through an electric potential difference acquires kinetic energy . Over a field-free drift length ,
For a fixed charge state and instrument setting, differentiating gives the approximate mass resolving power
For illustration, a arrival time with a timing width corresponds to , if that width is the relevant small peak-width measure.
The focusing problem addressed by Wiley and I. H. McLaren is therefore substantive: a spread of initial conditions can broaden a peak even when the detector timing is precise. Their work on space focusing and time-lag focusing changes the ion trajectories to reduce that broadening, rather than merely measuring the same broad peak with a faster clock.
For a monoprotic acid with analytical concentration , define the dimensionless weak acid dissociation fraction
This counts acid units in the conjugate base form. Identifying it with additionally requires negligible self-ionization of water and no other sources of electric charge. In the ideal dilute chemical solution model, with , the acid dissociation constant gives . Thus lowering hydronium thermodynamic activity favors the conjugate base.
Figure 1.
Dilution increases the weak acid dissociation fraction while raising pH in a synthetic aqueous chemical equilibrium
. Details.
The diagram uses stipulated dimensionless acid dissociation constant and self-ionization of water ion product at fixed temperature; these are model inputs, not measurements of a named substance. It solves the weak acid mass and charge balances. At , the calculated weak acid dissociation fraction is about and pH about ; at , they are about and . More acid units are dissociated as a fraction of the total, yet fewer hydronium ions occur per volume.
At extreme dilution, self-ionization of water makes approach , so pH approaches for the chosen model. The limiting weak acid dissociation fraction is , rather than exactly one. The calculation assumes pure added water, a neutral monoprotic acid, and no competing chemical reactions; actual contamination becomes increasingly important as falls.
Consider only neutral added to pure water, at fixed temperature, with ideal dilute thermodynamic activities, water thermodynamic activity approximated by one, and no added salts or other chemical species. Normalize every concentration by :
Conservation of acid units and zero net electric charge, respectively, require
The second equation balances positive hydronium against negative conjugate base and hydroxide. It would need all additional ions if salts or a chemical base were added. Together with acid dissociation constant and the self-ionization of water relation , these give
This is exact within the stated ideal model, including depletion and self-ionization of water. Multiplication by yields the cubic equation
For positive , the unmultiplied left-hand side increases strictly from negative to positive values as increases from zero to infinity; its derivative is . There is therefore exactly one positive root of a polynomial. A bisection method can find it without choosing an unphysical root of a polynomial.
If , neglect hydroxide, so and the quadratic equation retaining acid depletion gives
The last form avoids subtracting nearly equal numbers. If also , neglect depletion to obtain
Check both conditions after computing: measures the fraction lost from the initial undissociated weak acid inventory, while measures the omitted hydroxide contribution to electric charge balance. A depletion criterion is a chosen tolerance, not a universal boundary. Keeping depletion does not cure the neglect of self-ionization of water. These weak acid mass and charge balances also explain why the square root estimate cannot be extended to arbitrarily dilute chemical solutions.
Weak-field Zeeman splitting Created 2026-10-18 Updated 2026-10-20
Use the leading nonrelativistic magnetic coupling for an electronic level with total angular momentum operator , and choose the axis along a uniform external magnetic field , . Write its magnetic quantum number as , so . There are possibilities from to . With Landé g-factor , the first-order shift is
Here is the magnitude of the electron electric charge, its mass, the Planck constant, and the Bohr magneton. Both and are dimensionless; with measured in tesla and in joules per tesla, is in joules. The photon frequency shift is in hertz, not angular frequency; indices denote upper and lower levels. NIST states this weak-field convention and its orbital/spin assumptions explicitly.[ref]
The sign follows directly from magnetic dipole potential energy. Within this electronic multiplet, the projected magnetic dipole moment is . Therefore has the displayed positive coefficient. Subtracting the shifts of the two levels and using photon energy gives the transition formula. For the orbital case, gives the same leading frequency spacing as the classical charged oscillator. This explains the historical sensitivity to charge divided by mass; the quantum state derivation here is modern.
“Weak” compares interaction energies: mixing with neighbouring fine structure levels must be small, so remains a useful quantum number. The formula keeps the term linear in and neglects quadratic shifts. It also omits hyperfine structure; if that is resolved and controls the coupling, the appropriate total electronic-plus-nuclear angular momentum and splitting factor must replace . Weak compared with fine structure does not automatically mean weak compared with hyperfine structure.
Weak isospin Created 2026-10-07 Updated 2026-11-05
Weak isospin labels representations of the SU(2) factor in the electroweak gauge group. A left-handed lepton doublet has with third-component eigenvalues ; a right-handed charged-lepton singlet has . Along with electric charge, the third component determines the weak neutral current through .
Weinberg angle Created 2026-10-05 Updated 2026-10-20
The Weinberg angle rotates the neutral gauge fields into the photon and Z boson:
belongs to , to , and is the positive magnitude of the electron electric charge. These definitions use ; doubling the definition of hypercharge requires halving its coefficient in the covariant derivative. The electromagnetic coupling of a weak multiplet follows by substituting this rotation.
For a fermion component, the corresponding neutral coefficient is
For a left-handed charged lepton, and , giving . Its right-handed component has , giving . This algebra links the neutral current to the electromagnetic charge assignment. Together with the Higgs doublet, it also gives the tree-level electroweak gauge-boson masses with ; precise comparisons require a defined renormalization convention and radiative corrections.
Western blot separation 2026-10-13
In the common SDS-PAGE version, protein denaturation and binding of an anionic surfactant reduce differences due to folded shape and intrinsic electric charge. An electric field drives the resulting protein complexes through the gel; smaller chains generally migrate farther. A lane of reference proteins supplies positions for estimating apparent mass. This estimate depends on the separation conditions: it is not a direct weighing of a molecule, and different proteins can migrate together.
Willard Boyle Created 2026-10-24 Updated 2026-11-05
Willard Boyle and George E. Smith devised the charge-coupled device around controlled storage and movement of electric charge. Adjacent electrodes create potential wells in a semiconductor; timed changes of their voltages move stored electric charge between the wells. The 1970 proposal treats electric charge packets as information and discusses a shift register as well as an imaging device. This links electrostatic control of a surface to the transport and detection of an optical signal.[ref]
Figure 1.
Portrait of Willard Boyle
. © Prolineserver 2010, Wikipedia/Wikimedia Commons (cc-by-sa-3.0); existing Commons adjustment by WikiPedant. CC BY-SA 3.0, via Wikimedia Commons. Source.
X-ray photoelectron spectroscopy Created 2026-10-18 Updated 2026-10-20
X-ray photoelectron spectroscopy uses X-ray excitation to investigate electron removal energies, including those of core electrons. The common name electron spectroscopy for chemical analysis emphasizes its use in distinguishing chemical surroundings. The whole recorded spectrum can also contain electrons produced by processes other than direct photoionization; a peak assignment must identify the emission process as well as the chemical element.
In a modern implementation, a quartz crystal selects aluminum characteristic X-rays according to Bragg's law and focuses them onto the sample. Vacuum reduces gas collisions and contamination; a separately pumped entry chamber limits exposure to air. Lenses collect photoelectrons; an electrostatic electron energy analyzer transmits a narrow kinetic energy band. Stepping that band and counting detector pulses produces the spectrum. An electron flood source can compensate positive electric charge on insulating samples. Ion cleaning can alter vulnerable samples.[ref]
For a scan with count and dwell time at setting , compare rates , rather than raw counts when dwell times differ. Under an independent Poisson distribution model, the count standard deviation is approximately for a sufficiently populated bin. Longer acquisition reduces this relative counting measurement uncertainty; it does not automatically improve separation of overlapping peaks. Photoelectron peak overlap and resolution gives an example in which the same chemical separation produces either two maxima or one.
Figure 1.
Photoelectron energy selection and the analyzer energy reference
. Original functional diagram for an unbiased electrical conductor in electrical contact with an electron energy analyzer. The lower panel uses a common Fermi level; the two vacuum levels differ because the work functions differ. Vertical distances are schematic. The outgoing electron's total energy is measured above the analyzer's vacuum level to obtain its kinetic energy. This is an explanatory model, not a reconstruction of one historical instrument. Details.
In August 1896, Pieter Zeeman observed broadened sodium spectral lines at Leiden, initially without resolved components. His lecture describes a slit and concave diffraction grating, then compares the broadening with the sodium doublet separation: about one thirtieth, roughly ångström. This supplied a spectral reference scale, not an absolute magnetic field calibration. Later cadmium photographs displayed resolved transverse triplets and axial doublets.[ref]
The fuller report specifies a concave diffraction grating of ten-foot radius with 14,438 lines per inch, an adjustable slit and a micrometer eyepiece with vertical crosswire. Salt in a flame between electromagnet poles supplied the sodium spectral lines. Repeated switching broadened and restored them. To test changes in flame temperature or vapour density, Pieter Zeeman examined photon absorption through a heated porcelain tube with water-cooled glass windows. The arc lamp was displaced from the magnet and its light redirected by a mirror to avoid disturbing the arc. Rotating a narrower tube made the absorption spectral lines equally broad at different heights; the magnetic field still broadened their whole length.[ref]
For the axial test, pierced electromagnet poles let the light travel along the magnetic field. A quarter-wave plate and polarizer selected one broadened edge; rotating the analyser by or reversing the magnet current exchanged the visible edge. The crosswire made its displacement detectable. This tested electromagnetic polarization as well as line width. For its rough estimate the report compared each side's widening with the sodium doublet separation, obtaining about one fortieth, and stated an approximate magnetic field intensity in historical units. These passages give no absolute field-calibration procedure; the inferred charge-to-mass ratio was explicitly a first approximation.[ref]
Hendrik Antoon Lorentz's charged-oscillator theory connected the observed splitting to moving electric charge. In modern language, a line-position measurement needs a wavelength or frequency calibration and an independent magnetic field calibration before it determines a magnetic dipole moment. Resolving the individual components adds the transition information used in the worked example below.
For potential energy homogeneous of degree , Newton's second law gives . Indeed, Euler's identity implies , so the second derivative equals . Thus a trajectory with zero total energy and initially zero radial velocity remains on a sphere of constant radius. A positive electric charge released from rest on the equator of a fixed ideal electric dipole has these properties; in its meridional plane it oscillates on the semicircle on the negative-pole side. A finite two-charge electric dipole does not have exactly homogeneous potential energy and perturbs this result.
Zinc-copper displacement experiment Created 2026-10-14 Updated 2026-10-20
An inspected university demonstration makes the paired changes visible. The 2021 Chemical Demonstrations Booklet hosted by Edith Cowan University describes two cut square zinc strips, each immersed in a separate glass beaker. One contains blue copper(II) sulfate chemical solution, the other colourless zinc sulfate chemical solution. The published readouts are the appearance of a brown copper deposit on the first strip and fading of its blue chemical solution; after thirty minutes more deposit is reported. The comparison strip in zinc sulfate shows no visible change. The documented preparation is cutting the strips; surface polishing is not specified.[ref]
The reported interpretation is conversion of dissolved to metallic copper, accompanied by conversion of metallic zinc to dissolved . The sulfate anions balance bulk electric charge and cancel from the net chemical equation. The comparison shows that merely immersing a zinc strip in a sulfate chemical solution does not reproduce the visible coating.[ref]
Appearance is evidence for the proposed conversion, rather than a quantitative measurement of the two-electron ratio. Fading alone could also reflect dilution; deposit colour alone does not independently establish its composition. A stronger follow-up would compare the copper content of the chemical solution before and after, identify the solid, and check dissolved zinc. These are proposed analytical checks, not results reported in the booklet. Comparable starting chemical solutions, surface condition, immersion and observation time help interpret a comparison; an unchanged-looking strip does not rule out slow or invisible chemical reactions.
The two-electron interpretation comes from the species identities and electric charge balance, supported by the paired observations. It does not imply that the coating's mass equals the mass of zinc consumed: the same amount of substance of different chemical elements generally have different molar masses. Nor does it resolve microscopic surface sites or reaction pathways. The same net redox can be organized into separated compartments in a Daniell cell to obtain electrical work.
Zwitterion 2026-10-13
A zwitterion has opposite formal electric charges in different regions of a molecule, with zero net electric charge. Phosphatidylcholine provides a membrane-related example. This is stronger than merely having chemical polarity through fractional partial atomic charges. See IUPAC Gold Book: zwitterions.