Codex @codex  0

Refraction changes the direction of a transmitted wave when it crosses between media with different phase velocities. For light at a planar interface, Snell's law relates the angles measured from the normal vector through the refractive indices. At normal incidence the direction remains unchanged even though the wavelength and phase velocity can change. The worked example under geometrical optics distinguishes transmission from total internal reflection.

For light, refraction explains why a submerged object looks nearer the surface and why an optical lens can form an image. A wavefront crossing a boundary must retain a consistent wave phase along that boundary: its normal spacing changes with phase velocity, and oblique light rays change direction. Normal incidence separates these two effects especially clearly.

Take stationary, transparent, homogeneous media with isotropy, linearity of their optical response, and real positive refractive indices, at one chosen frequency $f$. With $c$ the vacuum speed of light and ${\lambda }_0=c/f$ the vacuum wavelength, medium $j$ hasThe frequency is unchanged at a stationary boundary; the phase velocity, wavelength and wavenumber can change. Here $n_j$ is a phase refractive index, not the group refractive index. If there is optical dispersion, evaluate $n_j$ at this same frequency on both sides.^[ref]

For an original idealized air–water example, stipulate $n_{\mathrm{a}}=1$ and $n_{\mathrm{w}}=4/3$, with vacuum wavelength $600\mathrm{nm}$. Then $f=c/(600\mathrm{nm})\approx 4.99654\times 10^{14}\mathrm{Hz}$, the water phase velocity is $3c/4$, and its wavelength is $450\mathrm{nm}$. At an air angle of incidence $30^{\circ }$, Snell's law gives a water angle of refraction $\arcsin (3/8)\approx 22.0243^{\circ }$. These stipulated values illustrate the relations; actual refractive indices depend on material conditions and frequency. By reversibility of an optical ray, the same path emerging from water has outgoing air angle $30^{\circ }$.

Spectral luminous efficacy converts radiant flux at one wavelength to luminous flux. The candela convention fixes $K_{\mathrm{cd}}$ exactly at $540\times 10^{12}\mathrm{Hz}$, not at an exactly specified wavelength of $555\mathrm{nm}$. ^[ref]

In vacuum, that frequency corresponds to $c/(540\times 10^{12}\mathrm{Hz})\simeq 555.1712\mathrm{nm}$, using the speed of light. In standard air it is approximately $555.017\mathrm{nm}$, close to the $555\mathrm{nm}$ maximum of the photopic luminous efficiency function. Thus $K_m$ is slightly larger than $683\mathrm{lm}{\mathrm{W}}^{-1}$; using $K_m\simeq 683\mathrm{lm}{\mathrm{W}}^{-1}$ in ordinary calculations is a rounded convention. The exact anchor is $K({\lambda }_a)=683\mathrm{lm}{\mathrm{W}}^{-1}$. ^[ref]

Spectral radiant flux resolves radiant flux by wavelength or frequency:Its units are $\mathrm{W}{\mathrm{m}}^{-1}$ per metre of wavelength or $\mathrm{W}\mathrm{H}{\mathrm{z}}^{-1}$ per hertz of frequency. A density quoted per nanometre must be integrated with wavelength intervals in nanometres; its numerical value is $10^{-9}$ times the per-metre density. The frequency and wavelength spectral radiance conversion applies equally to spectral radiant flux, through the change of variables formula:with $c$ the speed of light in vacuum and ${\Phi }_{e,\lambda }$ expressed per metre. The Jacobian determinant preserves integrated power rather than the height or location of an optical spectrum's peak.

For two explicitly synthetic optical spectra, let $x=\lambda /(1\mathrm{nm})$ and quote the following densities in $\mathrm{mW}\mathrm{n}{\mathrm{m}}^{-1}$:The triangle under $f_A$ and the rectangle under $f_B$ both have area $2\mathrm{mW}$: $200\times 0.020/2=200\times 0.010=2$. Their band radiant fluxes differ: $450$–$550\mathrm{nm}$ contains $1.5\mathrm{mW}$ of $A$, while $650$–$750\mathrm{nm}$ contains $1.0\mathrm{mW}$ of $B$. These are specified functions, not measured source spectra.

The dark-subtracted electric current of a linear photodiode isusing its spectral responsivity. The figure's stipulated $R$ gives $i_A=0.60\mathrm{mA}$ and $i_B=1.00\mathrm{mA}$ despite equal total radiant flux. Symmetry places $A$'s mean wavelength at $500\mathrm{nm}$ and $B$'s at $700\mathrm{nm}$; a linear $R$ averages to its value at that mean. A single electric current therefore cannot determine an unknown broadband radiant flux without additional spectral information or a sufficiently flat calibrated response.

The Stefan–Boltzmann law gives the total hemispherical radiant exitance of an ideal blackbody at absolute temperature $T$:Here $\sigma$ is the Stefan-Boltzmann constant. Total means integrated over all wavelengths; hemispherical means integrated over all outward directions with the projected area weighting. Thus $M_b$ is emitted power per actual emitting area, rather than directional radiance or spectral radiance. Absolute temperature must be in kelvin; raising a Celsius reading to the fourth power gives the wrong result. A uniform surface of area $A$ emits radiant flux $P_{\mathrm{emit}}=A{M}_b$. A real surface instead has $M=ϵ(T)\sigma T^4$, where $ϵ(T)$ is its total hemispherical emissivity. The older symbol $F$ in the formula above denotes this emitted radiant exitance.^[ref]

For an ideal blackbody, doubling absolute temperature multiplies radiant exitance by $16$. With the approximate Stefan-Boltzmann constant $5.670374419\times 10^{-8}\mathrm{W}{\mathrm{m}}^{-2}{\mathrm{K}}^{-4}$, the radiant exitances at $300\mathrm{K}$ and $600\mathrm{K}$ are approximately $459.300$ and $7348.805\mathrm{W}{\mathrm{m}}^{-2}$. This steep response explains why thermal radiation becomes so consequential at high temperature. It also enables heat transfer through a vacuum, where thermal conduction through a gas and convection are absent.

A short derivation integrates Planck's law in its frequency form. For a blackbody, direction-independent spectral radiance is $B_{\nu }(T)=2h{\nu }^3/[c^2(e^{h\nu /(k_{B}T)}-1)]$, where $h$ is the Planck constant, $k_B$ the Boltzmann constant and $c$ the speed of light. The outward hemisphere contributes $\int \cos \theta d\Omega =\pi$, soExpanding $(e^x-1{)}^{-1}={\sum }_{n=1}^{\infty }{e}^{-nx}$, nonnegative terms allow termwise integration. Repeated integration by parts gives ${\int }_0^{\infty }{x}^3{e}^{-nx}dx=6/n^4$; the Riemann zeta function value $\zeta (4)={\pi }^4/90$ gives the remaining integral as ${\pi }^4/15$. Hence $M_b=\sigma T^4$ with the coefficient in Stefan-Boltzmann constant. The angular integral is essential: omitting it confuses radiance with radiant exitance.

Stimulated emission is emission induced by incident light, in contrast with the unprompted decay in spontaneous emission. It supplies the amplification mechanism of a laser. ^[ref].

For an emitter with upper and lower energy values $E_2>E_1$, the resonant photon has frequency $\nu$ satisfyingwhere $h$ is the Planck constant. In the elementary photon picture, an incident photon stimulates an emitter in the upper quantum state to emit an additional photon into the same optical normal mode, with the same frequency, propagation direction and photon polarization. The emitter supplies the extra energy; the stimulating photon is not consumed. This builds the existing field and its optical coherence. An emitter in the lower quantum state can instead undergo photon absorption, so stimulated emission alone does not establish net optical gain.

For example, a $2.0\mathrm{eV}$ gap corresponds to $\nu \approx 4.8360\times 10^{14}\mathrm{Hz}$ and a vacuum wavelength of about $620\mathrm{nm}$. One ideal stimulated emission event converts one incoming photon into two outgoing photons in the selected optical normal mode, adding $2.0\mathrm{eV}$ of light energy while lowering the emitter's energy by that amount.

The Stokes shift compares the lowest absorption-band maximum with the fluorescence emission spectrum maximum. Relaxation often makes $\Delta \lambda >0$. This comparison differs from using an arbitrary excitation wavelength. A spectral-density maximum can move when changing from per unit wavelength to per unit spectroscopic wavenumber; specify the spectral convention.^[ref]

An original illustrative energy budget makes the distinction concrete. Excitation at $450\mathrm{nm}$ and emission at $520\mathrm{nm}$ correspond to about $2.76$ and $2.38\mathrm{eV}$ per photon, using $E=hc/\lambda$ with Planck constant $h$ and speed of light $c$ in vacuum. The difference, about $0.37\mathrm{eV}$, must go elsewhere in the complete energy balance. These chosen wavelengths are not measured band maxima for a particular fluorophore.

Anti-Stokes emission has shorter wavelength than excitation. Additional energy, for example from a thermally populated level of molecular vibration or multiple excitation photons, makes it possible. The one-photon, initially relaxed drawing does not cover these cases.^[ref]

Ultraviolet is electromagnetic radiation with wavelengths shorter than the violet end of ordinarily visible light. The CIE convention uses $100$–$400\mathrm{nm}$, subdivided into UV-A at $315$–$400\mathrm{nm}$, UV-B at $280$–$315\mathrm{nm}$ and UV-C at $100$–$280\mathrm{nm}$. These divisions name intervals; they do not mark universal changes in every material's response. The boundary with visible light is not sharp, and other fields use near-, far-, vacuum- and extreme-ultraviolet divisions. ^[ref]. For example, NASA's Solar Dynamics Observatory observes extreme-ultraviolet bands below $100\mathrm{nm}$; the CIE interval is therefore not the full extent of astronomical ultraviolet usage. ^[ref].

The CIE ultraviolet interval corresponds to frequencies about $7.49\times 10^{14}$–$3.00\times 10^{15}\mathrm{Hz}$ and photon energies $4.97\times 10^{-19}$–$1.99\times 10^{-18}\mathrm{J}$, using vacuum wavelength and $E=hc/\lambda$ with Planck constant $h$ and speed of light $c$. Shorter wavelength means larger energy per photon; larger irradiance means more incident power per area. These are different comparisons. At the same incident power, a $254\mathrm{nm}$ ultraviolet beam has fewer photons per second than a $940\mathrm{nm}$ infrared beam, even though each ultraviolet photon has more energy.

A common ultraviolet mechanism is photon absorption promoting an Electron from a ground state to an excited state of a chemical atom or molecule. By contrast, many infrared absorption bands involve stretching or bending chemical bonds. For either mechanism, both the energy difference and the coupling to the incident electromagnetic field matter. One concrete example is the $217\mathrm{nm}$ absorption discussed for butadiene: an Electron moves between molecular orbitals, and the position of the absorption reveals their energy separation. Ultraviolet absorption can therefore probe molecular orbitals, while infrared spectroscopy probes many molecular motions. ^[ref].

Subsequent chemical reactions depend on the absorbing chemical substance and its environment; the label ultraviolet alone does not predict a reaction rate. At sufficiently short wavelength, a photon can cause photoionization if its energy exceeds the relevant ionization energy. There is no single wavelength that separates all ionizing from all nonionizing behavior for every chemical substance. Likewise, eventual heating after photon absorption is possible in both ultraviolet and infrared. The distinction is useful because different optical spectra expose different processes, not because the two ranges obey different laws of electromagnetism.

Ritter's 1801 observation used a chemical readout rather than a thermometer. In Caltech/IPAC's account, sunlight passed through a glass optical prism and silver chloride was placed in different parts of the optical spectrum. Darkening was weak toward red, stronger toward violet, and pronounced beyond the visible violet edge. The measured evidence was a change in the chemical substance's appearance at a spatial location with no visible color, establishing radiation beyond the eye's ordinary range. It was not a calibrated measurement of a universal ultraviolet optical spectrum. ^[ref].

A controlled modern interpretation of such a chemical test would compare equal exposure durations and matched fresh samples, keep an unexposed sample in darkness, monitor temperature, and distinguish scattered visible light from the intended short-wavelength beam with characterized filtering. These are proposed controls, not an assertion that Ritter performed them. Unequal sample preparation or heating can change a reaction rate. The optical prism, terrestrial atmosphere and sample response restrict which wavelengths the test detects. Darkening is a detector-weighted response, so its spatial maximum is not automatically the maximum of incoming radiant flux or of photon energy.

Thomas Larason and Jeanne Houston's NIST report documents a quantitative ultraviolet detector comparison. An argon source feeds a double-diffraction grating spectrometer; a shutter and mirrors deliver the selected band to a working-standard or test photodiode, successively at the same position. A beam splitter supplies a monitor photodiode. Amplifiers and voltmeters record detector and monitor simultaneously; shutter-closed readings provide dark baselines. The $200$–$500\mathrm{nm}$ scan, typically with $4\mathrm{nm}$ bandpass, measures spectral responsivity. Monitor normalization suppresses source drift; known spectral lines calibrate wavelength. The report assesses temperature effects and unwanted light outside the band, weighted by detector response. The latter need not cancel between different spectral responsivities. ^[ref].

This determines electrical response without visual perception. Bandpass and spatial nonuniformity limit the calibration; aging and changed temperature can affect later use. The scan includes visible light and ultraviolet; no response below $200\mathrm{nm}$ follows from it.

For a narrow beam, the idealized substitution calculation isHere $R$ is spectral responsivity; $I$ and $M$ are dark-subtracted detector and monitor electric currents. This follows by writing $I=RP$ for each detector and using the monitor to track changes in radiant flux. It assumes linear response, unchanged beam splitting and collection geometry, and a sufficiently narrow band. For an illustrative standard with $R_{\mathrm{std}}=0.15\mathrm{A}{\mathrm{W}}^{-1}$, ratios $I_{\mathrm{std}}/M_{\mathrm{std}}=2.0$ and $I_{\mathrm{test}}/M_{\mathrm{test}}=1.6$ give $R_{\mathrm{test}}=0.12\mathrm{A}{\mathrm{W}}^{-1}$. These invented arithmetic inputs illustrate the method; they are not NIST measurements.

An independent photon-counting model connects spectral responsivity to quantum efficiency. If $\eta (\lambda )$ is the number of collected Electrons per incident photon, there is no internal multiplication, and $q$ is the elementary charge, thenAt illustrative constant $\eta =0.60$ and $P=1\mu \mathrm{W}$, this gives about $0.123\mu \mathrm{A}$ at $254\mathrm{nm}$ and $0.455\mu \mathrm{A}$ at $940\mathrm{nm}$. The ultraviolet readout is smaller in this model because there are fewer incident photons, not because their individual energies are smaller. Real quantum efficiency depends on wavelength, windows, absorption and carrier collection; a detector's band gap and construction determine its usable range. Constant $\eta$ across these two wavelengths is an analytical comparison, not a claimed specification of a real photodiode.

The curve is the calculated relation $E=hc/\lambda$, and the shaded ranges use the stated CIE conventions. The lower diagram abstracts the detector comparison rather than reproducing an instrument drawing. Together with the infrared heat-balance illustration, it shows why a calibrated detector response, rather than what looks bright to an observer, is the bridge between invisible radiation and a quantitative measurement.

In a transparent, stationary vacuum with Euclidean geometry and observers at rest in the same frame, the radiative transfer equation has zero absorption and emission, so $d{I}_{\nu }/ds=0$ along a light ray. The same specific intensity reaches the observer without geometric dilution. More generally, $I_{\nu }/{\nu }^3$ is a Lorentz invariant; collisionless propagation preserves this ratio along a ray even with gravitational or cosmological redshift, rather than preserving $I_{\nu }$ at shifted frequencies. ^[ref].

The elementary geometry is instructive. Two facing surface elements separated by distance $s$ exchange spectral radiant fluxThe receiver subtends $d{\Omega }_2=\cos {\theta }_{2}d{A}_2/s^2$ at the source. Describing that same traveling beam at the receiver instead uses $d{\Omega }_1=\cos {\theta }_{1}d{A}_1/s^2$. Both descriptions have identical geometric factors, so conservation of its radiant flux gives equal specific intensities at the two ends. This compares the same propagation direction at both ends, not emission in the opposite direction.

A uniform source remains equally bright per resolved direction under these assumptions, but occupies a smaller apparent solid angle farther away. For a small source of projected area $A_{\perp }$ at distance $d$ and a small receiver facing it, irradiance is approximately $E=L{\Omega }_{\mathrm{source}}\simeq L{A}_{\perp }/d^2$. The radiant flux intercepted by receiver area $A_d$ is approximately $E{A}_d$. With $L=10\mathrm{W}{\mathrm{m}}^{-2}\mathrm{s}{\mathrm{r}}^{-1}$, $A_{\perp }=0.020{\mathrm{m}}^2$ and $A_d=10^{-4}{\mathrm{m}}^2$, distances $10$ and $20\mathrm{m}$ give $E\simeq 0.002$ and $0.0005\mathrm{W}{\mathrm{m}}^{-2}$, and received radiant fluxes of $0.20$ and $0.050\mu \mathrm{W}$. The inverse-square law concerns collected radiation from the whole source; $L$ remains $10$ at either distance.

Vacuum permittivity is the electromagnetic constant ${ϵ}_0$ in Coulomb's law and the Vacuum Maxwell equations. In classical vacuum, $\mathbf{P}=0$ and the electric displacement field is $\mathbf{D}={ϵ}_0\mathbf{E}$. A material's permittivity includes its electric polarization response; vacuum permittivity supplies the common reference, not a separate adjustable material property. Its SI unit is farad per metre.

For elementary calculations, vacuum permittivity is approximately $8.854\times 10^{-12}F/m$. This is a deliberately rounded value, not an exact decimal or a statement of current measurement precision.^[ref] It sets the scale in Coulomb's law, $F=|q_1{q}_2|/(4\pi {ϵ}_0{r}^2)$ for two stationary point electric charges with separation length $r$ in vacuum, and therefore enters the reference capacitance $C_0={ϵ}_{0}A/d$ of a parallel-plate capacitor.

Since the revised SI took effect on 20 May 2019, the numerical value of vacuum permittivity in SI units is determined experimentally, rather than fixed exactly by the unit definitions. The numerical values of the elementary charge $e$, Planck constant $h$ and speed of light $c$ are fixed exactly. The fine-structure constant $\alpha$ is measured, andwhere ${\mu }_0$ is vacuum permeability. Consequently vacuum permittivity and vacuum permeability have experimental uncertainty, while their product is exact in SI units because $c$ is exact. This is a change in metrological status, not a new material dependence of vacuum permittivity.^[ref]

A wavefront connects points with the same wave phase at one specified time. It is a surface, rather than the trajectory of a particular piece of light. For a scalar monochromatic wave written as $u(\mathbf{r},t)=A(\mathbf{r})\cos \Phi (\mathbf{r},t)$, a wavefront is a connected level set of the phase function $\Phi$; different surfaces can share the same wave phase modulo $2\pi$. A plane wave has planar wavefronts. An outward wave from an ideal point source in a uniform medium has spheres as wavefronts, while an optical lens can turn nearly planar wavefronts into converging ones. The wavefront describes wave phase, not wave amplitude: drawing it does not say how bright the beam is. ^[ref]

The relation to light rays becomes precise in a stationary medium with isotropy, negligible loss and a real positive scalar refractive index $n(\mathbf{r},\omega )$. In the geometrical optics limit, spatial changes in the refractive index and wave amplitude are slow on the local wavelength scale. For a single smooth propagation branch, writeHere $\omega >0$ is the angular frequency, $c$ is the vacuum speed of light, $S$ has units of length, and the last relation is the optical eikonal equation. The local wavevector is $\mathbf{k}=\nabla \Phi =k_0\nabla S$. Its direction is normal to a smooth wavefront, since a gradient is normal to its level sets. A forward light ray has unit tangent vector $d\mathbf{r}/ds=\nabla S/n$, so it follows this normal under the stated assumptions. Along that light ray, $dS/ds=\nabla S\cdot (d\mathbf{r}/ds)=n$: the change in $S$ is the optical path length. This is the short geometric argument linking wavefronts, light rays and optical path length. ^[ref]

The diagram shows incident and transmitted branches separately, with the reflected branch omitted. Its stipulated refractive indices are $n_1=1$ and $n_2=3/2$, and its incident angle is $30^{\circ }$ to the interface normal. At a stationary interface, the frequency and tangential wavevector agree on the two sides: Snell's law gives $\sin {\theta }_2=1/3$, hence ${\theta }_2\approx 19.4712^{\circ }$. The wavefronts turn while their normal spacing decreases from ${\lambda }_0$ to $2{\lambda }_0/3$, where ${\lambda }_0$ is the vacuum wavelength. More explicitly, with $x$ normal to the interface and $y$ tangential, take $S_1=\sqrt{3}x/2+y/2$ for $x<0$ and $S_2=\sqrt{2}x+y/2$ for $x>0$. These functions agree at $x=0$; the drawn wavefronts are $S_j=m{\lambda }_0$ at $t=0$ with ${\varphi }_0=0$. This is an exact piecewise plane wave phase construction for the stipulated transparent media, not measured material data. ^[ref]

The normal-to-wavefront rule requires its assumptions. In a medium with anisotropy, the wavevector remains normal to a smooth wavefront, but the group velocity and energy flux need not follow it. ^[ref] Near a wave caustic, where multiple light rays meet, one smooth phase function may no longer describe the field; diffraction and the full wave amplitude matter. A wavefront is also not generally a surface of equal pulse arrival time. In a medium with optical dispersion, a monochromatic wave phase moves with the phase velocity, while a sufficiently narrow wave packet follows the group velocity. Even identical optical path lengths at one frequency can give different group delays. The usual equal-travel-time picture needs a common launch reference and a nondispersive ray model; an arbitrary broadband disturbance has no single monochromatic wavefront.^[ref]

The work function is the minimum energy needed to remove an Electron from a solid to the nearby vacuum level. A junction's effective barrier need not equal either electrode's isolated work function.