Shin-ichi Nagahama Created 2026-10-18 Updated 2026-11-05
Shin-ichi Nagahama coauthored work on blue laser diodes based on indium gallium nitride. The devices delivered W of optical power at A electric current, with wall-plug efficiency, for potential full-color displays.[ref]
High-Power Pure Blue InGaN Laser Diodes by Atsuo Michiue and others. pp. 194–197, author list and Summary: blue GaN-based laser diodes; output, operating current and wall-plug efficiency.
Shockley diode equation 2026-10-18
For a p-n junction at fixed temperature, the Shockley diode equation models its electric current asHere is the diode saturation current, the diode ideality factor, the thermal voltage, the Boltzmann constant, and the elementary charge.[ref]
The Junction Diode by W. Marshall Leach, Jr.. The Junction Diode, §1.2, printed p. 4, equation (1.1) and parameter definitions
For an original model example, choose , , and . Using and gives . Then gives , whereas gives . These are predictions of the declared model. There is no universal turn-on electric potential difference: solving the Shockley diode equation for the value needed at a chosen electric current givesAt , increasing by multiplies the electric current by approximately . At the same model gives . Its reverse branch approaches ; it cannot describe diode reverse breakdown.
A constructed extension adds internal series electrical resistance to a junction whose electric potential difference is . Applying the Kirchhoff cycle law givesFor and the same , sustaining needs : across the junction plus across its internal electrical resistance. The derivativeshows why the current-voltage characteristic becomes nearly a straight line when the internal series electrical resistance dominates. This is still a fixed-temperature model; self-heating can change , and . Real diodes also have leakage and charge-storage effects omitted here.[ref]
The Junction Diode by W. Marshall Leach, Jr.. The Junction Diode, §§1.3, 1.8 and 1.11: temperature dependence, charge storage and series bulk resistance
Short-circuit current Created 2026-10-20 Updated 2026-11-05
The short-circuit current is the terminal electric current of a device when its terminal voltage is zero. For a solar cell, it is usually denoted and is obtained from the illuminated current–voltage curve where the two terminals are connected through a sufficiently low-resistance measuring path.
A nonzero short-circuit current establishes photogenerated charge collection, but the delivered terminal power is zero at an ideal short circuit. Useful electrical output instead requires a finite operating voltage, often near the maximum power point. The short-circuit current depends on illumination, active area and collection efficiency; short-circuit current density divides it by the specified area, allowing devices of different sizes to be compared.
Shot noise 2026-10-18
Shot noise is fluctuation associated with discrete transfer events. For an electric current, individual charge carriers contribute finite amounts of electric charge, even when a meter displays a smooth mean. The simplest model is a stream of equal, independently arriving charges with constant rate: its Poisson process predicts both the mean electric current and the variance around it. Discreteness alone does not imply a Poisson distribution; the timing and correlations matter.
The useful surprise is that noise can reveal something a mean hides. Two devices can carry the same mean electric current yet have different fluctuations because one transfers charges independently and the other groups or regulates them. A calibrated shot noise photocurrent measurement can connect a macroscopic voltage variance to the elementary charge. Thermal electrical noise instead exists in an unbiased resistor at thermal equilibrium; a measured background can contain both mechanisms.
Walter Schottky's 1918 paper Über spontane Stromschwankungen in verschiedenen Elektrizitätsleitern treated amplifier sensitivity limits. Part II considered independent discrete transfers, including thermionic emission through a vacuum. On p. 563 he proposed amplifying fluctuations from a separate discharge tube to determine the elementary charge; those experiments were prospective, not reported results.[ref]
Über spontane Stromschwankungen in verschiedenen Elektrizitätsleitern by Walter Schottky. Schottky (1918), p. 541; Part II, pp. 547–552; p. 563, proposed experiment
Shot noise counting model Created 2026-10-18 Updated 2026-10-20
Let be the magnitude of each transferred electric charge, and let arrivals form a Homogeneous Poisson process of rate . Extend the stream over past and future times when considering stationary filtering. For electrons, , the elementary charge. Choose the positive electric current direction to follow these transfers, so is its mean magnitude. If counts arrivals in a gate of duration , thenThe gate's transferred electric charge is , and its average electric current is . Scaling the expected value and variance givesMore arrivals increase the absolute fluctuation but decrease its size relative to the mean. For an original count example with , the mean count and its variance are both , the standard deviation is , and the relative standard deviation is . The probability of no transfer is ; the probability of four is . A constant arrival rate does not prescribe four arrivals in every gate.
These are fluctuations of a time average, not the variance of an ideal instantaneous electric current. A model of point transfers has arbitrarily sharp impulses; it acquires a finite measured variance only after specifying a gate or linear filter. Actual collection pulses have finite duration and electrical circuits have finite response times.
Shot noise photocurrent measurement 2026-10-18
MIT's guide uses an illuminated vacuum photodiode, with collecting anode positive relative to the emitting cathode. A transimpedance amplifier gives ; a multimeter reads its mean. The fluctuation path rejects below , adds roughly tenfold voltage gain, then nominal hundredfold preamplification and a – band-pass filter; the readout measures root mean square voltage. With diode bias off, a sinusoid at the test port calibrates . Restore bias, retain gain settings, vary lamp brightness, and repeat both readings. The guide warns about overload; it supplies a procedure, not measured results.[ref]
Functional photocurrent measurement: separate mean-current, fluctuation and calibration paths
. Original functional diagram organizing the laboratory's measurement roles; it is not a component-level circuit reproduction. includes current-to-voltage conversion and the complete fluctuation path. The dark comparison below is an additional control. Details.The inference can be expressed without relying on nominal passband edges. Let denote the calibrated voltage transfer after the conversion, so and define . Under independent arrivals and an unchanged additive background,The slope of voltage variance against mean electric current can therefore estimate . A free intercept accounts for a constant background; forcing the line through zero generally biases the slope. The root mean square readings must have their mean removed and then be squared. Subtracting two root mean square amplitudes does not subtract independent variances. Estimate the variance from successive records; averaging the waveforms first would suppress the fluctuation being measured.
Additional controls sharpen this interpretation. Block the light with detector bias, temperature, and gain unchanged; this preserves dark current and electronics while removing photocurrent. Repeat this dark comparison between illumination settings to check drift. If independent dark arrivals have mean magnitude and illuminated arrivals add , their spectra add: . Subtracting the unchanged dark variance isolates . This subtraction model assumes unchanged transfers and independence; switching off bias for gain calibration is a different control and need not preserve the dark background.
Vary measured rather than assuming lamp knob position is proportional to photocurrent. Check collection versus bias to identify a range where incomplete collection is negligible; a space charge limited tube can correlate transfers. Verify that the transimpedance amplifier remains linear and that its frequency response is unchanged over the illumination range. Changing signal bandwidth should change the excess variance through ; compare inferred input spectra in several bands. Correlated fluctuations of the light source can add a contribution scaling approximately as , while an electronics floor can hide the linear term at small electric currents. A fitted line over a short range alone does not establish independent transfers.
The gain calibration must include the same detector-to-readout path used for noise, or explicitly supply any omitted transfer. Detector capacitance, finite collection time, amplifier voltage and current noise, thermal electrical noise, pickup, clipping, and finite recording precision limit the inference. Current-dependent electrical impedance or heating can make a background current-dependent too. Since contains squared gain, a small fractional error in gain produces approximately twice that fractional error in the predicted variance scale. Knowing a nominal gain and two cutoff settings is insufficient.
Shot noise spectral convention 2026-10-18
Write an ideal point-transfer model using the Dirac delta function:For this arrival stream with independent increments, distinct arrivals contribute the product of the means, which cancels when centering. The same-arrival term leaves the autocovarianceIts Fourier transform gives the two-sided power spectral density, while folding negative frequencies onto positive ones gives the one-sided convention:These spectra describe , excluding the spectral line from the mean direct current. The amplitude spectral density is in ; it is not a root mean square electric current until a measurement signal bandwidth is specified. Approximate white noise requires frequencies low enough that the single-transfer pulse shape and any correlations can be neglected. Neither the ideal impulses nor a flat spectrum extending to infinity describe a real detector at every timescale.
All spectra above are per hertz, with in cycles per second. One possible angular frequency convention defines a density integrated using alone. Since , it hasAnother common convention keeps the numerical density but integrates it with . State the integration measure as well as whether a spectrum is one-sided: a change of variable and a folding of signs are separate operations.
Shot noise worked example Created 2026-10-18 Updated 2026-10-20
For an original model, set , , , , and the exponential low-pass filter's . Assume an ideal detector without charge multiplication and omit all additive noise for this calculation. ThenDoubling doubles the voltage variance and multiplies its standard deviation by . Halving also doubles the variance, provided the detector remains approximately white throughout the enlarged passband. Using in place of underestimates the variance by the factor . These are calculated predictions, not measured values or settings claimed for the laboratory below.
To read the dimensionless figure, set and , with frequency in cycles per unit . A gate of duration has count mean and variance . The continuously filtered instead hasThe count and the filtered electric current are different observables. The factor comes from the exponential weighting, not from non-Poisson arrivals. The dimensionless count illustration is a separate choice of rate; it does not assert that the example has only four electrons per .
Shunting inhibition Created 2026-10-14 Updated 2026-11-05
Shunting inhibition is suppression of another input's effect through increased synaptic conductance: opening additional ion channels lowers effective electrical resistance, reducing the voltage response to a given added electric current. When the added reversal potential equals the resting membrane potential, there can be no voltage change at rest and still be inhibition of a simultaneous input. See 1.4 Limitations of the Leaky Integrate-and-Fire Model.
Use the passive synaptic potential model below with leak , and capacitance . A sustained inward test electric current of alone gives a steady voltage increase of , so . Effective electrical resistance is and the time constant is .
Now hold a shunting conductance open with . With no test electric current, rest stays at . With the same test electric current, total conductance becomes , so the steady voltage increase is only : . Effective electrical resistance is and the time constant is . A faster response can therefore be smaller. At the original rest the shunting electric current is zero; at it is , opposing the voltage excursion.
The factor of three reduction applies to this constant-electric current, constant-conductance example. A finite pulse, conductance-driven input or spatially extended dendrite need not have the same reduction. The interesting feature is conditional action: the shunt can leave a quiet neuron's voltage unchanged yet reshape its response when another input arrives. A model that represents all inhibition as a fixed outward electric current misses this behavior.
For N independent equivalent ion channels with open probability and approximately Ohmic open-state electrical conductance , the mean electric current is . A numerical Electrical conductance cannot be inferred without the relevant reversal potential or driving voltage.
Single-channel current-voltage relation 2026-10-14
For an ideal open ion channel with constant electrical conductance , membrane potential and reversal potential , define outward electric current as positive:This is an Ohm's law model of the open state, not a universal channel law or a rule for opening probability. In the synthetic figure, and . Because , the open-state electric currents at and are and . Zero electric current at the reversal potential does not imply a closed ion channel. Real ion channels can have nonlinear responses, so the straight line is an explicit idealization.
Single-channel recording 2026-10-13
Single-channel recording resolves individual ion channel opening events as changes in electric current. The distinction is resolution, not an absolute rule about configuration: rare, sufficiently large events can also be resolved during whole-cell recording. Simultaneously open identical ion channels can give successive current levels; indistinguishable amplitudes alone do not prove a unique channel identity.
Single-electron superconducting tunneling Created 2026-10-18 Updated 2026-10-20
Single-electron superconducting tunneling transfers individual electrons across a barrier into or out of quasiparticle states of a material with superconductivity. In a normal-metal–insulator–superconductor junction, abbreviated NIS, only one electrode has superconductivity. Such a junction can reveal a superconducting energy gap without supporting a DC Josephson effect between two superconducting reservoirs.
For an elementary interpretation, assume an opaque barrier, approximately constant normal-electrode density of states, and an energy-independent tunneling matrix element over the range probed. Write the superconducting density of states divided by its normal-state value as , with measured from its chemical potential. A signed voltage convention chosen for positive normal-electrode injection giveswhere is the Fermi-Dirac distribution at a common temperature and is the normal-state junction electrical resistance. This current convention is local to the NIS measurement. The expression counts occupied initial and empty final states; it is a quasiparticle transport model, not a current-phase relation of a superconducting weak link.
An original analytic illustration uses the ideal fully gapped BCS theory spectrum at zero temperature, with positive gap edge :For positive , the occupation difference restricts the integral to . Since , integration and odd extension giveThe threshold is for this NIS model. In the corresponding zero-temperature single-electron process between two fully gapped superconductors, creating excitations on both sides instead requires . That quasiparticle threshold does not forbid coherent pair electric current below it. At finite temperature, thermally populated quasiparticles soften the simple threshold argument.
At zero temperature in the NIS approximation, away from the singular gap edge. Thus a voltage sweep probes the excitation density of states. The ideal divergence is rounded in real measurements, and at nonzero temperature the derivative samples a thermally broadened range of energies. For , the model has : electrical work creates excitations and is dissipated on relaxation. This distinguishes its steady transport from the conservative Josephson coupling energy.
Skin effect Created 2026-10-18 Updated 2026-10-20
An alternating electric current and its electromagnetic field concentrate near a conductor's surface. For a local isotropic good conductor with real electrical conductivity , magnetic permeability , and , the field penetrates over the skin depth .
Slide-wire resistance bridge experiment 2026-10-14
PHYWE's documented experiment uses a one-metre slide wire, a connection box, an unknown resistor, a known comparison resistor, a supply, and a digital multimeter in steady-current mA mode as the null detector. Its two yellow detector leads join the fixed-resistor junction and the slider. Move the slider until the indicated electric current vanishes; read the two wire lengths on the ruler and infer the unknown electrical resistance from their ratio. The guide advises changing the comparison resistor if no null is reachable or the slider lies near an end.[ref]
The inference requires uniform electrical resistivity and wire cross-sectional area, so the two wire electrical resistances have the ratio of their lengths, by . Retaining PHYWE's labeling, its equation (6) is , where is the comparison electrical resistance. This is a different arm placement from our schematic. The guide's example table reports larger discrepancies near wire ends.[ref]
Useful additional controls distinguish a true null measurement from an insensitive or disconnected detector. Check the detector zero with the supply off, then move the adjustable arm slightly to either side of the candidate balance and verify opposite detector signs. Reconnect the unknown with short, secure leads and repeat the balance. Any lead or contact electrical resistance included in that arm contributes to the inferred value, even though a detector lead carries no electric current at exact balance. For very small unknown electrical resistances, four-terminal sensing addresses this separate connection problem; a detector null alone does not remove it.
Check for Joule heating by repeating at lower supply electric potential difference and with shorter powered intervals, holding ambient temperature fixed. At balance the unknown still dissipates powerHalving quarters this power while halving ideal detector sensitivity. A balance that moves with excitation or elapsed time suggests changing electrical resistance, including self-heating; it is not explained by passive detector loading alone. These are proposed controls, not claimed outcomes of PHYWE's experiment. Standard-resistor accuracy, wire uniformity, contact reproducibility and finite detector resolution still limit the electrical measurement. Large electrical resistances also make unwanted leakage paths consequential.
Slotted-line waveguide measurement 2026-10-18
MIT's documented slotted-line waveguide measurement shorts one end of a rectangular electromagnetic waveguide and excites it through a probe coupled by capacitance. A second such probe moves through a longitudinal slot, aligned with the wall electric current to reduce disturbance. Its output locates axial standing wave nulls. The book's standing-wave setup chooses a frequency above the first waveguide cutoff frequency and below higher-mode cutoffs. Lowering it below the first cutoff instead reveals spatial decay away from the source. The text supplies apparatus and an observable comparison, rather than a table of measured null positions.[ref]
The inference can be checked without assuming that detector output is proportional to electric field amplitude. At fixed measured frequency, record several minima at coordinates ; then estimate when the minima are consecutive. This uses positions alone. Compare the result with the guided wavelength prediction using independently measured and . The spacing above is a synthetic example, not a reading from the MIT apparatus.
Additional proposed controls are to keep probe insertion fixed, repeat the scan in both directions, recheck source frequency, and compare shallow probe settings for shifts in the minima. These test probe loading, mechanical backlash and drift. A deliberately reflecting termination supplies the standing wave; varying its position should translate the pattern without changing adjacent-null spacing in a uniform single-mode region. Source-adjacent evanescent waves, unintended reflections, additional propagating normal modes, detector noise and finite positional resolution can spoil that inference. A disappearing remote signal alone does not distinguish below-cutoff decay from loss or poor excitation, and a scan at one frequency does not measure a pulse's group velocity.
Small-signal model 2026-10-18
A first-order Taylor expansion of an electrical circuit's response about an operating point. It describes small changes in electric potential difference and electric current; the neglected higher-order terms limit the useful signal range.
Solar-cell fill factor 2026-10-18
The solar-cell fill factor compares the maximum delivered electrical power with the rectangle formed by the open-circuit electric potential difference and short-circuit electric current. It measures the shape of the illuminated current-voltage characteristic. The conversion efficiency is .
Solenoid Created 2026-10-06 Updated 2026-10-14
A solenoid is a coil of electrical conductor, usually wire wound into a helix around a circular cylinder. The same electric current flows through its successive turns. Each turn contributes a magnetic field; the superposition principle makes their axial contributions reinforce inside the coil. Curl the fingers of your right hand in the direction of the electric current around the turns: the thumb gives the interior magnetic field direction by the right-hand rule. Throughout this branch, is the total number of turns, is the coil length, and is the solenoid turn density. [ref]
https://www.feynmanlectures.caltech.edu/II_13.html#Ch13-S5. Feynman, Leighton and Sands, The Feynman Lectures on Physics, II.13–5: the field of a long coil
.The attraction of a long solenoid is a controllable, nearly uniform magnetic field over an interior working region: change the electric current to tune its strength, or reverse the electric current to reverse its direction. This makes it a useful setting for studying the Lorentz force, measuring magnetic flux, and constructing an inductor. Its geometry turns the many contributions from individual turns into the simple long-solenoid approximation. A real finite coil has end fields and leakage; its exterior magnetic field is not zero. The on-axis magnetic field of a finite solenoid below quantifies that difference.
Historically, the coil helped connect magnetic fields to electric currents. In his memoir on the mathematical theory of electrodynamic phenomena, Ampère modeled the interactions of magnets using the ends of solenoids in place of microscopic magnetic constituents. This was a route toward explaining magnetism by electric currents, rather than a modern microscopic account of magnetization. [ref]
https://www.e-rara.ch/zut/download/pdf/1038813. Ampère, Mémoire sur la théorie mathématique des phénomènes électro-dynamiques, concluding discussion on p. 289
. The historical setting is documented by the [ref]https://ampere-archives.fr/histoire-electricite/parcours-historique/lois-courants/ampere-loi. Ampère archives, investigations of current interactions in 1820–1826
.
