For a double-couple seismic source, measure P-wave first-motion polarity signs and use source-to-station takeoff angles from the location and velocity model to plot them on a focal sphere. Fit the alternating radiation-sign quadrants, optionally adding amplitude ratios and waveform information. The two nodal planes determine a focal mechanism, conventionally expressed by fault strike, fault dip and fault rake.
A more general waveform inversion fits a seismic moment tensor to several components and stations. Its double-couple part supplies candidate slip and normal vectors, but a general moment tensor should not be forced to be double-couple without justification. Polarity calibration, near-nodal observations, path effects and takeoff-angle errors limit the result.
Point-source radiation alone interchanges the fault plane and auxiliary plane without changing the double couple. Resolve this fault-plane ambiguity using mapped rupture, aftershock geometry, geodesy or finite-rupture directivity. A dense set of polarity picks does not by itself remove that fundamental ambiguity.
Linearized arrivals contain . When the stations have similar depth sensitivities, a depth change shifts nearly all predicted times together and an origin-time change compensates it. Distant stations can also have very weak depth sensitivity. Improve the range of takeoff angles and station distances, especially with nearby or borehole stations, and include S–P or depth-phase differences such as pP–P that cancel origin time while retaining depth information. Accurate phase identification and the velocity model remain necessary.
Nearby events observed at the same station share most of their propagation path, so common model and station errors cancel in differential arrival times. Waveform cross-correlation can also determine their relative timing more precisely than separate onset picks. Double-difference earthquake relocation fits
along with the difference in origin times. The relative cluster geometry can be precise while the entire cluster remains displaced. Absolute anchoring still needs a well-calibrated velocity model or a source of known position.[ref]
A dense array does not correct an incorrect velocity model. The faster southwest block permits shorter travel times than an assumed uniform medium, with refraction favouring paths through fast rock. First arrivals may include refracted or seismic head wave paths rather than the assumed direct straight paths. Fitting those arrivals with one constant speed can make an earthquake on the fault appear closer to southwest stations and farther from northeast stations.
The sign follows even from a two-station linearization. Put southwest and northeast stations at , and the true event at with depth . In a constant-speed model,
A negative observed differential residual therefore produces , an apparent southwest displacement. A common origin-time adjustment cannot remove this directional residual. The stated kilometre-scale offset is a model bias, not proof that the fault dips towards the apparent epicentres. Its exact magnitude cannot be predicted without the actual velocities and station geometry; the question supplies that magnitude as an observation.
The relevant contrast is independently documented at Parkfield: higher velocities lie southwest of the fault, with lower velocities northeast.[ref] Account for the lateral structure and correct phases, then relocate and test whether the bias remains.
Figure 1.
Illustrative velocity contrast and the direction of a constant-speed location bias
. Details.
Elastic rebound. Tectonic motion loads a fault whose shallow portion is locked. Rock on either side deforms and stores elastic strain energy while slip is inhibited. When failure permits rapid slip, part of the stored energy becomes seismic radiation and part is dissipated in friction and damage. The adjacent rock partly relaxes, while a permanent displacement remains across the fault. Geodetic strain accumulation and coseismic offsets support this loading–release picture.[ref]
The model is useful for brittle crustal faulting but is not a prediction of precise recurrence, rupture size or frictional evolution. Aseismic creep can release deformation without a large sudden event. Viscoelastic flow, afterslip, fluid-pressure changes and interacting fault segments complicate a simple locked-fault cycle. Deep-focus earthquakes and non-shear source components require additional physics; not every earthquake source is adequately described by a shallow brittle double couple. Rebound also need not release all the pre-existing stress.
Figure 1.
Original displacement-profile schematic of locked loading and permanent slip after relaxation
. Details.
A thin negative-gradient velocity zone. In horizontal layering, use the seismic ray parameter , the conserved horizontal slowness. A ray turns when . Downward passage through decreasing speed makes smaller, so a surface ray cannot turn in the negative-gradient interior. Rays either turn above the zone or penetrate it and turn below where speed has recovered sufficiently. This produces missing turning depths and a seismic shadow range from a low-velocity zone in the ideal ray model.
Retain all branches using
The travel-time slope is . Just below the critical value that permits passage beyond the upper speed maximum, the ray makes a finite extra excursion through the low-velocity region. Range can jump, and the deep branch can fold back before resuming its normal trend, giving multiple arrivals outside the shadow. A first-arrival curve alone hides some of these branches. Define the seismic intercept time by
The – representation displays the gap and fold; the – representation has separate shallow and deep branches and a branch jump at the critical ray parameter for the piecewise-linear cusp model. Do not join them by invented turning rays. Diffraction and finite-frequency energy soften a purely geometrical shadow.
The figures use an explicit illustrative profile, not measured Earth parameters: speed rises from 1 to 2 over depths 0 to 1, falls to 1.8 by depth 1.2, then rises with its original gradient. The asthenosphere beneath oceanic lithosphere is an important setting for a low-velocity zone. A major P-wave speed reduction also occurs at the boundary between the mantle and the outer core of the Earth; S waves do not propagate through the liquid outer core of the Earth.[ref]
Figure 2.
Analytically traced illustrative velocity reversal: rays, travel times, range–slowness and intercept time
. Details.
For seismic source inversion, collect calibrated, consistently filtered samples from all available stations and components into a data vector . For each trial source position and origin time, compute the corresponding elastodynamic Green tensor in an Earth model, including the instrument response used for the data. Write the symmetric seismic moment tensor in six independent symmetric basis tensors:
Each column of is the synthetic seismogram for one basis tensor. An off-diagonal basis tensor contains both symmetric entries, so the double contraction and its factors of two remain consistent.
A suitable objective is
with noise covariance ; a justified penalty can be added for regularization. At fixed , solve for the six entries of by weighted least squares, preferably using a QR decomposition or singular value decomposition rather than explicitly inverting the matrix of the normal equations. Then search over the four nonlinear parameters using a coarse location/time grid followed by local refinement. This variable projection reduces a ten-parameter search to a four-parameter nonlinear search with an inner six-parameter linear fit. Merely having more than ten data samples does not ensure identifiability: the design matrix must have adequate rank and the network must resolve the source's radiation patterns.
Potential errors include inaccurate velocity, density, anisotropy and attenuation in the assumed Earth model; neglected finite rupture and source-time effects; timing, instrument calibration or component-orientation errors; correlated noise; uneven station coverage; and tradeoffs between depth, origin time and the moment tensor. Imposing a double-couple seismic source mechanism without evidence can hide genuine non-double-couple components. Regularization also changes the recovered source and should be reported.
Inspect residuals, singular values, recovery of synthetic sources and uncertainty under resampling or noise perturbations. Linearized covariance or a posterior distribution can quantify uncertainty within the assumed forward model, but does not automatically account for errors in that model. A good waveform fit alone is insufficient evidence that all ten parameters are uniquely recovered.
Homologous temperature and deformation. Homologous temperature is , with both temperatures in kelvin and the appropriate pressure- and composition-dependent melting temperature. It measures proximity to melting more meaningfully than an absolute temperature alone. Pressure, composition and water can alter both and the flow law, so equal does not imply identical rheology.
A useful thermally activated material creep law is
with stress , grain size , activation energy and activation volume . Water activity can add another factor. Increasing temperature raises the rate at fixed stress when the activation enthalpy is positive, greatly lowering effective viscosity. Solid material can therefore flow on geological timescales well below melting.
Diffusion creep is approximately linear in stress: bulk-diffusion Nabarro-Herring creep has grain-size scaling , while grain-boundary Coble creep has in their ideal regimes. Dislocation creep usually has a stress exponent greater than one and weaker grain-size dependence. Its effective viscosity scales as at fixed temperature, so stronger forcing changes the apparent viscosity. At lower homologous temperature, brittle/frictional deformation or high-stress dislocation mechanisms can become important. The dominant process also depends on pressure and confinement; low temperature is not by itself a guarantee of brittle failure deep in a planet.
A deformation mechanism map compares the competing rates or strengths as functions of stress and homologous temperature at specified grain size, pressure and composition. Fine grains favour diffusion creep; larger stress favours nonlinear dislocation creep. There is no universal temperature dividing all these regimes. This sensitivity helps explain a strong outer lithosphere above a slowly flowing solid mantle and why modest thermal or water variations can reorganize deformation.
Determining the actual planform of mantle convection. The task is to infer the geometry of upwellings, downwellings and connecting flow in the present Earth, rather than to draw a preferred laboratory convection cell. Plate velocities and the distribution of subduction zones directly constrain surface motion and likely cold downwellings. Ridges, volcanism and hotspots provide further clues, but a ridge need not mark the centre of a deep plume, nor is every hotspot uniquely explained by one plume geometry.
Seismic tomography supplies three-dimensional velocity structure from body-wave travel times, waveforms and surface-wave dispersion. Fast slab-like structures can often be traced beneath subduction zones into the lower mantle. The 1997 global P-wave study reported long narrow lower-mantle structures connected with convergence and interpreted some slab segments as reaching the deepest mantle; that is evidence for deep circulation, not proof that every slab follows one route.[ref] Temperature affects seismic speed, but composition, phase changes, water and anisotropy also matter, so velocity is not itself a flow map.
Gravity and the geoid constrain the spatially integrated density field and its induced boundary deformation. Dynamic topography supplies information about vertical stresses, after separating crustal structure, isostatic loads and thermal subsidence. Seismic anisotropy can constrain deformation and fabric orientations, subject to a mineral-physics relation between fabric and flow. Discontinuity topography and the mantle's heat budget provide further tests. Each observation has a different sensitivity to density, temperature and viscosity, making their combination more useful than any one image.
Compare these observations with three-dimensional geodynamic models that solve creeping-flow force balance, mass conservation and thermal transport, including buoyancy from temperature and composition, realistic plate motions, viscosity structure and phase boundaries. Predict seismic observables, gravity, geoid and dynamic topography from the same model, and assess data coverage and resolution before interpreting a feature. Whole-mantle exchange, impeded or deflected slabs near transition zones, and broad deep anomalies can coexist; the evidence does not require identical stacked or single-layer cells everywhere. The actual planform is constrained by joint seismic, gravitational, surface-kinematic and thermal evidence, with substantial nonuniqueness in its detailed flow and history.
At latitude and longitude , . Motion is . A meridian boundary has horizontal normal , so its across-boundary velocity is
For a transform fault this must vanish along the whole meridian, not only at an isolated point. Thus . Select the solution in the western hemisphere:
The other solution is the antipodal meridian in the eastern hemisphere. Geometrically, the transform meridian is in a great-circle plane perpendicular to the Euler angular velocity vector. Its outgoing tangent direction at either pole, expressed in the fixed axes, is .
At the south pole . Choose plate C as the instantaneous reference frame. Since mm, the two components of relative angular speed give 20 and 48 mm/year. The plate velocities in the fixed tangent-plane axes are
The plate velocity triangle therefore has sides
The physical boundary rays point along for AB, for AC and for BC. Plate A occupies the quadrant between the first two rays, B the narrow wedge between AB and BC, and C the remainder. The stated overriding relations make AB and AC subduction trenches, while BC remains a transform fault: this is a trench-trench-transform triple junction. Put the subduction teeth on B's side of AB and A's side of AC, identifying B above A and A above C.
For kinematic stability there must be a single junction velocity compatible with all three boundary-normal motions. Use the standard idealization that each trench's normal velocity is that of its overriding plate, with no independent rollback. AB is parallel to , so . AC is parallel to , so . The transform requires to be parallel to , which is true for this intersection. Hence
The southern triple junction is instantaneously kinematically stable. It is stationary relative to B, migrates along AB relative to A, and migrates along BC relative to C. This compatibility result does not promise long-term stability if plate rotations or trench rollback change. Notice that the three relative velocities close even though the overriding order is not a statement that all three plates move toward one common stationary point.
Figure 1.
Original polar boundary geometry and plate velocity triangles; dashed velocity-space constraints locate compatible south and north junction velocities
. Details.
At the north pole , so the velocities reverse:
The triangle still has side lengths 20, 48 and 52 mm/year. Across AB, A moves toward positive relative to B; across AC, A moves toward positive relative to C. Both boundaries therefore open and are spreading ridges, with full opening speeds 20 and 48 mm/year. Together with BC they form a ridge-ridge-transform triple junction.
In the symmetric normal-spreading model, a ridge's normal velocity is the mean normal velocity of its two plates. AB gives , and AC gives . Their intersection lies on the BC transform velocity line:
This northern junction is also instantaneously kinematically stable. The diagrams use the same fixed geocentric tangent axes at both poles; reversing velocities is not the same operation as reflecting a map drawn from an exterior observer's viewpoint.
Not every ridge-ridge-transform geometry works. For pure normal spreading, each ridge velocity line is the perpendicular bisector of the corresponding side of the plate velocity triangle. Their intersection is the triangle's circumcenter. A transform junction must also lie on the third side's line. A nondegenerate triangle's circumcenter lies there only at that side's midpoint, so the opposite angle is a right angle. Equivalently, . The two ridge directions are then perpendicular, as they are here. RRF junctions are conditionally stable, with the right-angle ridge geometry in this symmetric pure-normal model; they are not all stable. Oblique or asymmetric accretion changes the velocity-line assumptions and must be specified separately.
Assume an Earth-like reversing planetary magnetic field and magnetizable crust that acquires thermoremanent magnetization on cooling. Alternating polarity intervals then produce marine magnetic stripes parallel to each spreading ridge, with matching age/polarity sequences on its two sides. AB has half-spreading rate 10 mm/year, whereas AC has half-spreading rate 24 mm/year. Thus the same polarity interval produces widths and mm when time is in years: the AC stripes are 2.4 times wider. Age increases away from each ridge. The transform produces no new crust; bands end or are displaced at it, rather than forming a third symmetric stripe sequence centred on BC. This is the remanent-magnetization/spreading mechanism developed from marine magnetic observations.[ref]
A more precise local sketch can be made in the northern junction frame. Let be distances in kilometres along the fixed tangent axes and the crustal age in Myr; numerically, mm/year equals km/Myr. Relative to the moving junction, the velocities are , and . In A the steady age field is , since backwards advection first reaches either the AC or AB ridge. Equal-age bands therefore join as right-angle corners within A, with the corners migrating along the ray . In the B wedge, and the stripes meet the transform. On the C flank directly supplied from AC, ; other parts of C carry older crust whose inherited pattern requires earlier boundary history.
Figure 1.
Original conditional remanent-polarity sketch in the north-junction frame; reversal intervals are illustrative and unsupplied older crust is left unassigned
. Details.
The sketch displays magnetization polarity, not a computed total-field anomaly amplitude. Actual anomalies depend on the planetary field direction, source depth, magnetization strength and observation geometry. The paper supplies no field history, so a numerical reversal chronology or an absolute positive/negative anomaly sequence cannot be inferred. Without field reversals, ridge accretion alone does not imply alternating polarity stripes.
First-motion source mechanisms. Locate an earthquake from arrival times and use a seismic velocity model to calculate each station's source takeoff direction. Measure the initial direct P wave polarity after checking instrument sign, component orientation, timing and phase identification. An upward trace at an instrument is not automatically a source compression without the propagation and component convention. Plot the inferred source radiation signs on a focal sphere, commonly using a lower-hemisphere equal-area projection, and seek nodal planes separating positive and negative observations.
For a shear dislocation with orthogonal unit slip and fault-normal vectors , the double-couple fault source has . Its far-field P radiation sign is that of
The two zeros are orthogonal nodal planes; the four quadrants alternate between outward and inward initial radiation. Their orientations and quadrant signs determine candidate strike, dip and rake. Normal, reverse and strike-slip mechanisms give different projected patterns. The earthquake pressure and tension axes are the negative and positive moment-tensor principal directions, respectively; they do not by themselves measure the complete regional stress tensor.
Figure 1.
Original lower-hemisphere equal-area P-radiation polarity examples for ideal strike-slip, normal and reverse double couples
. Details.
There is a fundamental fault-plane ambiguity: exchanging and leaves the radiation tensor unchanged. First motions therefore give a fault plane and an auxiliary plane without saying which actually slipped. Use mapped rupture, aftershock geometry or independent geodetic displacement to select the physical fault where possible. Polarity signs alone do not measure scalar seismic moment, source duration or rupture extent. A poorly sampled focal sphere or many near-nodal observations can admit several mechanisms rather than one defensible beachball.
Propagate uncertainty in event depth, velocity gradients and takeoff angles, allow for mispicked or reversed polarities, and report the range of mechanisms consistent with the observations. A primary method did this by testing alternative locations and velocity models and validated its uncertainty estimates using noisy synthetic data and clusters of events with similar waveforms.[ref] Broadband waveforms and amplitude ratios add information, especially for non-double-couple sources, but they are additional measurements rather than a way to extract amplitude information from a sign-only data set.
Radial density structure. In an isotropic adiabatic material, the seismic parameter is
For a chemically homogeneous region whose background stratification is adiabatic, . Combine this with spherical hydrostatic balance and mass conservation to obtain the Adams-Williamson equations
The inward density increase follows compressibility under the increasing pressure. A specified starting density and measured allow integration within a homogeneous adiabatic layer. Seismic velocities alone, however, do not determine that density normalization, since they contain ratios of moduli to density. Chemical boundaries, phase transitions, nonadiabatic thermal gradients and anisotropy require additional modeling; a composition jump is not obtained by blindly integrating the smooth relation across it.
Use travel times and surface waves to constrain elastic velocities, reflected/converted phases to locate interfaces, and normal-mode frequencies to constrain density as well as elastic structure through their sensitivity kernels. Impose independently known total mass and moment of inertia:
Because these weight depth differently, they help distinguish admissible profiles, but two integrals alone do not specify an arbitrary radial function. Laboratory equations of state and mineral physics restrict composition, compressibility and density jumps. pressure and enclosed mass are matched across interfaces, while density may jump. In a liquid region and , so the shear-wave absence constrains phase state without itself providing a direct density measurement.
The Preliminary Reference Earth Model is a concrete joint inversion of seismic travel times, normal modes, mass and inertia, including density and attenuation along with elastic structure. The original analysis combined these complementary data rather than deriving density uniquely from P wave speed.[ref] A defensible radial density model combines hydrostatic/thermodynamic relations with seismic and global integral constraints, and states where homogeneity and adiabaticity fail.
Slab pull is generally the largest direct driving contribution for plates attached to substantial cold descending slabs. Cooling makes oceanic lithosphere negatively buoyant; sinking slabs transmit a pulling force to the rest of the tectonic plate. The comparison is a force balance, so the following driving and resisting processes both matter.
The first two gravitational contributions ultimately belong to the same coupled mantle convection system: the plates are its cold upper thermal boundary layer. They are not passive rafts on a prescribed conveyor belt. A plate with little attached descending slab need not have slab pull as its largest local driver, and a large gross slab pull can be partly consumed by bending and interface resistance. Geological observations and force comparisons nonetheless support the general dominance of slab pull for rapidly moving subducting plates.[ref]
Specify what “onset” means. I would distinguish the first local, perhaps short-lived subduction event from persistent, self-sustaining recycling in a connected global network of tectonic plates. Modern plate tectonics combines relatively rigid moving lithosphere, localized boundary deformation, seafloor spreading and sustained convergence. A sinking drip or a single imposed descending sheet is not sufficient evidence of that global regime. Different processes may become established at different times, so a transition interval may be a better hypothesis than an instantaneous worldwide switch.
Construct competing physical models. Solve conservation of mass, momentum and energy for evolving mantle convection and lithosphere, including temperature- and stress-dependent rheology, brittle yielding, plastic deformation, melting, compositional buoyancy and relevant phase changes. Use geodynamic modelling to compare a stagnant lid, episodic overturn, drip-dominated recycling and a sustained mobile lid. In a simplified incompressible creeping-flow framework,
Here is velocity, pressure, effective viscosity, the strain-rate tensor, density, gravitational acceleration, specific heat capacity, thermal conductivity, radiogenic power per unit mass, and dissipative heating per unit volume. These equations are a framework: compressibility, latent heat and chemical transport may require additional terms. A simple yield stress law represents cohesion , friction coefficient and pore pressure , illustrating why hydration and interface weakening can change the outcome.
Vary the early-planet controls rather than assuming the answer. Explore plausible initial mantle potential temperature, radiogenic heating, crust thickness and composition, water inventory, grain-size evolution, surface temperature, and boundary strength. Hotter mantle lowers viscosity but can produce thicker buoyant basaltic crust; it does not automatically make sustained subduction easier. A cold strong plate can transmit slab pull yet resist bending and initiation. Water weakening of rocks, melt-induced weakening, inherited faults and mechanically weak sediments can change this balance. Test proposed triggers such as mantle plume impingement or gravitational instability without presupposing an established global plate-force system.
Useful diagnostics include the Rayleigh number,
with thermal expansion coefficient , layer thickness , thermal diffusivity and temperature contrast , together with surface mobility, the localization of deformation, plate longevity, melt production and material recycling. A large Rayleigh number establishes vigorous convection under suitable conditions, not necessarily a mobile lid. A convincing model should sustain one-sided subduction, connected boundary evolution and seafloor spreading after any artificial trigger is removed. Compare initiation thresholds with continuation thresholds: hysteresis can allow an established regime to persist under conditions in which it would not spontaneously start.
As an example of the type of experiment, three-dimensional models have tested mantle plume-induced subduction initiation, finding sensitivity to plate buoyancy, magmatic weakening and hydration of the interface. The scientific use of such results here is to identify a feasible mechanism and its predicted signatures, not to adopt their success as a direct measurement of an ancient onset date.[ref]
Connect a model regime to a date through independent evidence. Couple the experiments to candidate planetary cooling histories, then predict observable pressure-temperature-time paths, magmatic compositions, deformation patterns and recycling rates for each regime. If independently dated rocks constrain a thermal or compositional state, ask which regimes can reproduce that state and the observed geological associations. Repeat over uncertain initial conditions and constitutive parameters, check numerical resolution, and compare two- and three-dimensional results where geometry matters. Models that prescribe a descending slab, fix plate velocity, or insert a weak boundary may be excellent forward models of a working subduction zone but do not demonstrate spontaneous initiation.
The result is a conditional statement: persistent plate tectonics is physically feasible under a range of conditions, and dated geological observations may favor that range at a particular time. Uncertain cooling histories, several feasible regimes and uncertain rheology prevent numerical feasibility alone from dating onset. The strongest constraint comes when the same parameter range explains multiple independently dated observations and alternative regimes fail those tests.
Take the curl of the Euler equations for an inviscid fluid. The gradient on the right has zero curl. Use the stated vector identity with , :
incompressible flow gives , while a curl always has zero divergence, so . The remaining terms give
For a two-dimensional velocity independent of , and . Thus the scalar vorticity is conserved following each fluid particle. It can still vary from particle to particle; this is advection, not a claim of spatially uniform vorticity.
In steady flow, the supplied Euler equations for an inviscid fluid gives
Taking its scalar product with gives . Along a streamline with tangent , this is precisely zero derivative of . Hence is constant along each streamline, with possibly different constants on different streamlines.
If the flow is also irrotational, and thus . Therefore has one constant value throughout each connected fluid region. The stronger conclusion uses vanishing of the entire gradient, not just its component along the velocity.
Milne-Thomson's circle theorem states that if is a complex potential of a two-dimensional potential flow whose singularities lie outside , then
has the circle as a streamline, with the original exterior singularities unchanged. Additive constants in the potential are immaterial.
Take , using the convention that positive is positive circulation. Reflection in the circle gives, up to a constant,
The reflected vortex at has strength , while the central term has strength . Their combined circulation around the cylinder is zero; this is the circulation normalization implicit in the requested equation.
The vortex moves with the velocity induced by the other singularities, excluding its own singular term. Since complex velocity is , its value at the vortex is . Thus
Writing and multiplying this equation by gives
Its real part implies , and its imaginary part gives
The radius is constant and the angular velocity is constant on that orbit. For positive the orbit is clockwise with this convention. Retaining the conjugate on the time derivative is essential for the sign.
Write , and . The Euler-Lagrange equations give . A normal mode is a motion with fixed nonzero vector ; its normal frequency is . Substitution gives . Thus the squared normal frequencies are the assumed positive distinct roots of
For either root, solve the associated two linear equations for the mode ratio.
For the rods, the small angles are and . The first rod has kinetic energy . The second rod's center has horizontal velocity and its angular velocity is . Its center-of-mass moment of inertia is , giving
Adding these kinetic energies gives . The first center rises by , and the second by . Multiplying by the respective masses and gives
Therefore the stated Lagrangian is .
Set . The mode equation is
Hence
The mode ratio is , so the ratio of the rods' angles is . It is positive for and negative for . Thus the lower-frequency normal mode has the rods in phase, and the higher-frequency normal mode has them out of phase.
In vacuum, the source-free Maxwell equations are
Put and denote the constant electric amplitude by . A corresponding traveling-wave magnetic field is
Both divergences vanish because both the electric field and the magnetic field depend only on and have zero component. Direct differentiation gives and . A time-independent background magnetic field satisfying the homogeneous equations could be added; the formula is the wave component.
Introduce the magnetic vector potential and electric potential by and . These identities automatically give the divergence equation for and Faraday's law. For this wave choose and ; the derivatives just calculated verify both potential equations.
The electromagnetic force is the Lorentz force, . On the smooth constraint plane , the constraint force is normal to the plane. Both and are tangential, so is normal and is balanced by that constraint force; it does not affect the tangential motion. Thus
A particular motion is , a circle of radius
The general planar motion also includes a constant drift velocity; the particle moves on a circle when that drift is zero. The constraint force can do no work because it is perpendicular to the velocity.
A normal Fermi liquid describes an interacting fermion system whose low-energy excitations remain continuously connected to adding particles to or removing particles from a Fermi gas. The elementary long-lived excitation is a Landau quasiparticle: adding a particle also changes the surrounding many-body state. Its energy, velocity and interactions are renormalized, even though its electric charge and spin remain those appropriate to the excitation.
Near an isotropic Fermi surface,
Residual interactions make the quasiparticle energy depend on the occupations of other quasiparticles, expressed by the Landau quasiparticle energy functional. Its angular components give the Landau parameters controlling density and spin responses. Thus the successful particle picture does not mean that interactions have become zero.
Pauli blocking restricts the final states available for low-energy collisions. In an ordinary three-dimensional Fermi liquid with regular interactions, a representative decay law is
At , the width vanishes faster than , so an excitation becomes increasingly sharp as it approaches the Fermi surface. Its coherent spectral weight is the quasiparticle residue , and the physical electron occupation has a discontinuity of height at zero temperature. Incoherent spectral weight accounts for the remainder. The quasiparticle occupations themselves obey a Fermi-Dirac distribution.
Several leading thermodynamic signatures retain their gas-like form but have interaction-dependent coefficients. In particular,
for an isotropic spin-one-half model, with the spin-summed quasiparticle density of states per volume. effective mass changes , while the dimensionless interaction parameters separately change the spin susceptibility and compressibility. Collisionless collective density motion can propagate as zero sound, distinct from the single-particle excitations.
The quasiparticle scattering rate often underlies a low-temperature contribution to metallic electrical resistivity, but a mechanism relaxing electrical electric current is needed. In a clean Galilean-invariant continuum, electron-electron collisions conserve total momentum and do not alone give a finite dc electrical resistivity. Crystal Umklapp scattering or other current-relaxing processes change that conclusion.
Normal liquid helium-3 and many metals motivate the Fermi-liquid framework. Pairing, magnetic ordering or other transitions can reconstruct the low-energy states. Generic interacting one-dimensional fermion systems instead form a different low-energy state, so the three-dimensional quasiparticle conclusions should not simply be transferred to a chain.