Axial moment of inertia. In the original diagram is the outer radius and the inner radius. For uniform mass density , a coaxial annulus of thickness has . Therefore the axial moment of inertia of a hollow cylinder isSince , factorizing the fourth-power difference givesFor a solid cylinder , giving . For a thin cylindrical shell with fixed mass and , . The latter limit agrees with every mass element being at radius .
Undamped rolling oscillations. Let be axle displacement from the spring equilibrium. Rolling without slipping imposes . The sum of translational and rotational kinetic energy isThe potential energy is . Differentiating in the absence of damping, or applying the force and torque equations below, givesFor the thin shell , the effective inertia is , and the angular frequency of the simple harmonic motion isStatic contact friction supplies the required torque but does no work when the contact point is instantaneously stationary.
Damped force balance. Take rightward force as positive and counterclockwise rotation as positive. Write for the signed static friction at the bottom contact. ThenEliminate and use :Here has units , so has units and units . The stated drag force is interpreted as acting through the axle, with no additional viscous torque. An oil bath could also exert such a torque physically, but its magnitude is not specified by this force-only model.
Light damping. Substitution of into the differential equation gives . In the underdamped regime ,Taking real linear combinations gives the general damped harmonic oscillator displacementThe constants are fixed by the initial displacement and velocity. For example, release from rest at gives and . Light damping means , in which case and the envelope decays slowly compared with an oscillation.
Faraday's law of induction relates an induced electromotive force to the rate of change of magnetic flux. Choose a positive orientation around a loop and its associated surface normal by the right-hand rule. For a stationary conducting loop,Unlike an electrostatic field, the induced electric field generally has nonzero curl; the differential form is . For a moving circuit, magnetic flux transport for a moving circuit includes the magnetic Lorentz force on the charges:where is the local wire velocity. Thus changing the field or moving a conductor can produce induction.
The minus sign is Lenz's law: an induced electric current, when a closed conducting path permits it, produces a magnetic field opposing the change of linked flux. It need not oppose the original field itself. For example, increasing flux through a loop produces a current tending to reduce that increase; decreasing the same flux reverses the current. The opposition is consistent with conservation of energy: external mechanical or electrical work is needed to maintain a change against its inductive reaction.
For a coil of turns, define the magnetic flux linkage , reducing to when every turn links the same flux. For fixed geometry and a linear magnetic response, self-inductance is defined by , and the coil's induced electromotive force isThe corresponding terminal voltage drop, with the passive sign convention, is . It opposes changes in electric current; it does not require the current itself to vanish.
Building the current from zero requires power . Integrating gives the energy stored by an ideal inductor:This energy is stored in the magnetic field and can be returned when the current falls. In a series RL circuit driven by a constant voltage , Kirchhoff's voltage law gives . Starting with zero current, , with time constant . This makes the resistance to rapid current changes directly observable. Two coils also have mutual inductance: changing primary current induces secondary electromotive force with a polarity determined by the chosen winding orientations, the principle behind a transformer.
Past exam of the physics course of the year 1 of the natural sciences course of the University of Cambridge 2019 Section B 8 a Solution Created 2026-10-18 Updated 2026-10-20
Use a stationary wavefunction solving the time-independent Schrödinger equation. For energy above the positive step potential, the positive wavenumbers areIncidence only from the left permits a right-moving incident plane wave and a left-moving reflected plane wave for , but only a right-moving transmitted plane wave for :The omitted right-incident component would describe a different scattering experiment. Wavefunction matching at a finite potential step requires continuity of both and for a finite jump and the same mass on either side:Eliminate from the second condition:The first ratio is a transmission amplitude; a transmitted probability current also depends on its different propagation velocity.
For a downward step potential, , the region on the right is classically allowed at every positive incident energy. The same matching calculation applies withAs , and . Henceand the flux coefficients satisfyThis quantum reflection at a downward step occurs even though a classical particle would simply accelerate into the lower-potential region. The abrupt change in wavenumber causes strong reflected-wave interference.
Both this limit and part (d) give total reflection, but their probability amplitudes and spatial densities differ. At the upward-step threshold, and : an antinode meets the origin and the right-hand density stays finite while its propagation velocity vanishes. Here and : the incident and reflected waves nearly cancel at the origin, and the transmitted density vanishes while the right-hand propagation velocity remains finite. In both descriptions the incident probability amplitude is held fixed for comparison.
The coefficients above are limiting flux ratios for . At exactly the incident probability current vanishes, so directly dividing zero-energy fluxes would not define a scattering probability.
Past exam of the physics course of the year 1 of the natural sciences course of the University of Cambridge 2019 Section B 9 Solution Created 2026-10-18 Updated 2026-10-20
Experimental evidence. Tests of special relativity check linked predictions about light propagation, clocks and four-momentum. Several independent kinds of experiment support those predictions.
- In the Michelson-Morley experiment, light follows perpendicular paths in an interferometer. Rotating the apparatus would change their round-trip travel-time difference in a classical stationary-aether model. The expected orientation-dependent interference fringe shift was absent at the predicted scale, consistent with isotropy of the round-trip speed of light in special relativity. This experiment alone does not distinguish special relativity from every alternative theory.[ref]On the Relative Motion of the Earth and the Luminiferous Ether by Albert Abraham Michelson and Edward W. Morley. 1887 report, apparatus and predicted versus observed orientation-dependent fringe shifts
- The Fizeau experiment compares light propagation with and against flowing water using an interference fringe displacement. Neglecting optical dispersion, the velocity-addition formula predicts
The Hypotheses Relating to the Luminous Aether by Hippolyte Fizeau. 1851 report, counter-propagating beams, reversing water flow and resulting fringe displacements
- A controlled muon storage-ring time-dilation experiment measured circulating muons at . Its measured mean lifetimes were about , compared with about at rest, consistent with . This tests time dilation with accelerator-selected particles.[ref]Measurements of relativistic time dilatation for positive and negative muons in a circular orbit by J. Bailey and others. 1977 abstract, Lorentz factor and positive- and negative-muon lifetimes
Atmospheric muons and the two frame descriptions. Atmospheric cosmic rays create unstable particles whose decay chains produce muons. A stopped-muon experiment measures the time between a stopping signal and the subsequent decay electron, obtaining the proper mean lifetime . The associated light-travel distance is only , yet substantial numbers of energetic atmospheric muons reach detectors after travelling several kilometres.
For an ideal selected cohort produced height above a detector and moving downward at constant speed , the flight time in the terrestrial frame is . Time dilation predicts a laboratory mean lifetime , hence survival fractionWithout time dilation, the predicted exponent would be and the surviving population much smaller. Altitude comparisons constitute a cosmic-ray muon time-dilation experiment: select comparable momenta or energies and account for detector acceptance, atmospheric energy loss and backgrounds before interpreting the count ratio.
For illustration, not as a claimed measurement, take and . Then , the laboratory flight time is , and the predicted surviving fraction is about . Omitting time dilation would give only about on the same idealized constant-speed model.
In the muon rest frame, its decay still follows . The atmosphere and ground move upward. Their separation, measured simultaneously in that frame, is shortened by length contraction:The same survival fraction follows. The terrestrial description uses a longer-lived moving particle; the muon-frame description uses a shorter atmospheric flight path. They describe the same production and detection events. This consistency illustrates both time dilation and length contraction, while the survival measurement is not two independent experimental tests merely because it can be described in two frames.
Energy-momentum invariant. For a particle with rest mass ,Since , substitution and cancellation of giveThis relativistic energy-momentum relation reduces to when .
Laboratory beam energies. If both final muons are at rest in the laboratory, their total momentum is zero and their total energy is . Four-momentum conservation therefore requires equal and opposite incoming momenta. Because the electron and Positron have equal rest masses, they then have equal total energies:Subtract each particle's own rest energy:Using the usual handbook rest energies gives approximately for each beam. These are the ideal kinematic threshold values. Just above threshold, the pair has small, equal and opposite momenta in this laboratory frame.
Positron momentum. Apply the relativistic energy-momentum relation to and use its stipulated negative- direction:The electron has the opposite momentum, with .
Boost to the electron rest frame. The electron's velocity is . Thus moves in the positive- direction, and its Lorentz factor satisfiesThe positron has the same laboratory total energy as the electron, so . The supplied Lorentz transformation then givesAs a sign check, the same boost gives , as required for the electron rest frame.
The tunnel is taken thin enough that removal of its material does not significantly disturb spherical symmetry. For , the enclosed mass isBy the spherical shell theorem, the inward gravitational acceleration has magnitudeThe released gravitational potential energy is the positive work done by gravity while the mass falls from radius to :By conservation of mechanical energy,Inside the cavity, the spherical shell theorem gives zero gravitational field, so the velocity stays constant. The original figure places B and C at opposite ends of a cavity diameter, a distance apart. ThereforeThe quantity has units , so this is a time. There are no numerical values for or in the paper. The transit time is independent of and the falling mass . The cavity's gravitational potential is constant, not necessarily zero; only its gradient vanishes. The calculation is a hollow-sphere gravitational transit.
For injected velocity , the Lorentz force isFor nonzero electric charge and nonzero operating current, the velocity selector condition isThe requested nonrelativistic kinetic energy is consequentlyBoth electric current and electric charge cancel. Reversing the sign of reverses both component forces and preserves their cancellation. The dimensions are consistent because has units of speed, while is dimensionless. The assumed nonrelativistic particle regime requires ; the problem supplies no values with which to evaluate a numerical energy.
Translation and rotation. For particles constituting a rigid body, the total linear momentum isThus the total external force governs the motion of the centre of mass. About that centre of mass, the angular momentum and applied torque arewhere primes denote relative positions and velocities. The derivative of the vector is taken relative to nonrotating axes. The inertia tensor relates angular momentum to angular velocity, . For rotation about a fixed unit direction , the moment of inertia is ; it measures the resistance to changing that rotation and gives rotational kinetic energy . The simpler vector relation applies when the rotation axis is a principal axis, not for every orientation of an arbitrary rigid body. These translational and rotational balances must be applied together; a nonzero torque does not replace the net-force equation.
Gyroscope precession. A rapidly spinning gyroscope has a large angular momentum approximately along its spin axis. The torque component parallel to this vector changes its magnitude, while the perpendicular component turns its direction. If the vector undergoes precession with angular velocity , then over its change is the infinitesimal rotation . HenceThis describes direction-changing precession at constant ; any spin-up contribution must be added separately. For perpendicular torque and angular momentum, the precessional component perpendicular to is . The familiar tendency of a supported gyroscope to turn sideways is this vector balance, not the absence of gravitational force.
Wheel-lift threshold without the flywheel. Let be the centre of mass height, half the wheel separation, and the bend radius. The required inward force is , provided by static friction. Let be the summed outer and inner wheel normal forces. Vertical balance gives . Moment balance about the centre of mass givesThe inner wheels lift when . Thus the vehicle rollover threshold isThe stated mass cancels. This assumes the rigid geometry and sufficient static friction specified in the paper; the threshold is set by loss of contact, not by sliding.
Engine flywheel. The moment of inertia of a uniform disc givesIts spin angular speed, spin angular momentum, and turn angular speed at areThe transverse flywheel axis is perpendicular to the vertical turn axis, soTo specify its direction, use right-handed axes forward, to the car's left, and upward, and consider a left turn. Then . Choose the flywheel angular momentum to the car's right, . The car must applyto obtain the required precession. This gyroscopic roll torque in a turning vehicle opposes the outward roll tendency in a left turn. By the right-hand rule, the flywheel must turn counterclockwise viewed from the car's right side toward its centre, opposite to the rotation of wheels rolling forward. Reversing flywheel spin would aggravate the outward roll. Reversing the turn reverses both roll and gyroscopic torques, so the same flywheel spin remains helpful.
Gyroscope vector directions for a left-turning car and the flywheel spin needed to oppose outward roll
. Details. For comparison, the outward inertial roll moment at the stated speed is , and the limiting gravitational restoring moment is . The gyroscopic reaction is about of the former and of the latter, so it is appreciable for this large flywheel. If this ideal model is extended to include the favorable gyroscopic reaction in the wheel-lift condition, it gives , or about rather than . This quantifies a useful but finite increase in the rollover threshold.
Frame definitions and relativistic effects. Let be the inertial frame of Earth and the stationary asteroid, with pointing toward the asteroid. Bob's inertial frame moves at relative to . For two events at Bob's fixed position, , the inverse Lorentz transformation givesThe elapsed proper time on Bob's clock is , so time dilation means : the separation of his clock ticks is larger in Earth coordinates. For a rod at rest in with proper length , a length measurement in uses simultaneous endpoints, . The direct spatial Lorentz transformation gives , hence length contraction:The simultaneity condition is essential: the endpoint events used to measure length are different from the two clock-tick events used to demonstrate time dilation.
Bob's speed. Food consumption measures Bob's own proper time, . The Earth-frame distance is and the Earth travel time is . ConsequentlyPutting , , soThe Earth travel time is months. Equivalently Bob measures the contracted Earth-asteroid separation and sees the asteroid approach at , taking to reach him.
Events A and B. Set both coordinate origins at Event A. Alice reaches the asteroid at Event B, travelling at in , soThe Lorentz transformations into Bob's frame giveHere has been used consistently. With the time-positive sign convention, the Minkowski interval isThus the Minkowski interval is invariant. It is timelike, as expected for two events on Alice's subluminal worldline. Using the opposite metric sign convention would change both signs together, without changing invariance.
Relative velocity and spacetime diagram. Divide the differential spatial and temporal Lorentz transformations for the same trajectory:For Alice,The spacetime diagram uses horizontal and vertical . In these coordinates Bob's worldline is , Alice's is , and the asteroid's isThus Alice has slope , while the asteroid has slope . Their intersection is exactly B, . The asteroid later reaches Bob at . These intercepts and gradients show the relativistic velocity addition geometrically.
Spacetime diagram in Bob's inertial frame, with Alice's velocity, asteroid motion and the A-to-B coordinate differences
. Details. The force law separates into two identical harmonic oscillator equations:For positive , the general real solution isSince by Euler's formula, these are exactly the stated real parts of complex exponentials. The amplitudes and phases are fixed by the four initial position and velocity components. This is two-dimensional isotropic harmonic oscillator flow: the same angular frequency acts in every direction.
The starting radius is . In uniform circular motion, the required centripetal acceleration has magnitude . The initial velocity must be tangent to the starting radius, with the orientation chosen anticlockwise:The resulting trajectory isIt has constant , soThis is the horizontal line in the right panel of the figure. The kinetic energy also equals , giving total mechanical energy , twice that for release from rest at the same point.
Write and , where is the undamped angular frequency. The linear drag gives the vector damped harmonic oscillator equationFor the original circular initial conditions, and , the exact underdamped solution isUsing , and givesThis exact potential energy is useful because it satisfies the prescribed initial conditions, including . In the stated weak-damping limit , and the square bracket differs from one by a small oscillatory term. The leading approximation is thereforeThe radius is approximately , so the trajectory is approximately a shrinking logarithmic spiral. The exactly exponential result would require slightly adjusted initial velocity; with the specified undamped circular velocity, the small modulation above is real. This is the initially circular damped planar oscillator.
The parameters giveThe coordinate expressions for the initially circular damped planar oscillator areThe damped oscillation period gives almost four anticlockwise turns in four seconds. The radius envelope falls by . Substitution into the exact coordinates givesThe left panel annotates the initial tangent, time marks and endpoint. Because is an unspecified starting coordinate, the axes are normalized by rather than assigned numerical lengths.
Exact underdamped trajectory over four seconds and a representative overdamped trajectory for the same initial circular velocity
. Details. For overdamping, . Put . Both characteristic roots are negative real numbers. Replacing trigonometric functions by hyperbolic functions gives the exact trajectoryIt starts from with tangent , bends anticlockwise toward the origin, and approaches it without repeated revolutions. The right panel gives a representative choice ; the paper does not specify one particular value of in this regime.
One can make the qualitative shape precise. In radial and tangential directions relative to the initial radius, the angle turned from the starting direction obeysFor , both coordinates stay positive, and the approach is along the fixed ray with . The initial velocity is tangential, so an immediately straight radial return would be incorrect. The absence of oscillatory characteristic roots prevents repeated revolutions. This is a non-spiralling overdamped central oscillator trajectory.
Past exam of the physics course of the year 1 of the natural sciences course of the University of Cambridge 2022 Section A 5 Solution Created 2026-10-18 Updated 2026-10-20
Write for the side length. In an equilateral triangle, the distance from centre to a vertex is ; it is two thirds of the altitude . By the superposition principle, the electric potential at the centre due to the three fixed electrons isHere is the elementary charge and the vacuum permittivity. The approaching electron has electric charge , so its potential energy, measured relative to infinity, is positive:The fixed sources do not move, and radiation is excluded. Hence conservation of mechanical energy givesUsing , for the electron mass, and givesThis speed is small enough to justify classical kinetic energy. There is an idealization in the word “stops”: along the line normal to the triangle through its centre, this threshold energy makes the electron approach the central equilibrium asymptotically. A smooth, conservative trajectory cannot reach an equilibrium with exactly zero velocity in finite time unless it was already there. The energy threshold, and therefore the requested initial speed, is nevertheless unambiguous.
Take along the upper ship's initial velocity, and take from the lower ship to the upper ship at closest approach. The upper and lower ships then have initial velocities and . Their equal masses put each at distance from the centre of mass, soBy momentum conservation, the centre of mass keeps moving with constant velocityIn that frame the ships have opposite velocities of magnitude . Their initial angular momentum about the centre of mass is nonzero even though their trajectories were straight:The tether exerts central internal forces, so conservation of angular momentum givesEach ship follows uniform circular motion of radius around the translating centre of mass, clockwise viewed from . More explicitly, put the initial centre at the origin and defineThe kinetic-energy decomposition about the centre of mass verifies conservation of mechanical energy directly:At closest approach the relative radial velocity is already zero, so connecting the tether requires no dissipative radial impulse. Subsequently its tension is perpendicular to each ship's velocity relative to the centre of mass and does no net work on the pair at fixed .
During quasi-static tether contraction, momentum conservation keeps constant and conservation of angular momentum keeps constant. To leading order in the slow radial motion, the kinetic energy isIts derivative at fixed , not fixed , isTo compute the power supplied by the tension, use the instantaneous unit vector from the lower to the upper ship. Their radial velocities relative to the centre of mass are , and the tension forces are . ConsequentlyThe translational contributions cancel between the two ships and the tangential contributions are zero. The contraction mechanism supplies positive work, increasing the rotational kinetic energy.
The slow-contraction approximation matters: for a prescribed smooth with a taut tether, the exact kinetic energy and tension include radial terms,These still satisfy . Thus the paper's displayed formula is the leading result for slow, smooth contraction, or is exact when the radial kinetic energy is constant; it is not an identity for every possible shrinking schedule.
Choose downward velocity positive, and assume the collected material is initially at rest in the cloud's inertial frame. This assumption is required for the equation in the question. During , momentum conservation for the droplet plus the material it collects givesup to second-order increments. Thus the variable-mass system satisfiesSince , , givingThe notation is appropriate because here depends only on time. The extra term accounts for the momentum needed to accelerate newly collected mass; using would omit it. For incoming material with downward velocity , the more general equation is .
Set . The proposed velocity and its derivative areThe remaining term in the linear ordinary differential equation isso the sum is exactly . Also , establishing both the equation and its initial condition:The integrating factor explains where the expression comes from:The result has units of velocity. Its continuous limit is , despite the apparent in the written expression.
At closest approach the velocity is tangential. The conserved specific orbital energy and specific angular momentum areThe negative energy gives an elliptic orbit. Its semi-major axis isSince ,This treats the star as fixed, appropriate to . Equivalently, equate the energy at the two turning points using . The planet mass cancels; a circular-orbit relation would be inappropriate here.


