Past exam of the mathematics course of the University of Cambridge 2016 iii Paper 320 1 Solution Created 2026-10-03 Updated 2026-10-14
For one target galaxy, an encounter with relative speed sweeps a cylinder of volume in time . Multiplication by the number density gives the encounter rate . Thus the geometric galaxy-encounter rate givesThis is the expected number of mergers in the geometric model. For independent encounters, the Poisson process probability of at least one is , so the displayed linear probability is valid for rare encounters, . There is no factor of one-half for a single target; that factor would enter a count of distinct pairs across the whole population.
For an illustrative group environment, take , , and a Hubble time of order years, or . The path length is about , using the stated distance conversion. HenceThe estimate scales linearly with environment density and quadratically with the adopted merger radius. It is an order-of-magnitude model estimate, not a universal observed merger fraction; reducing the illustrative density by a factor of one hundred reduces the estimate by the same factor.
For the tidal calculation, use the relative potential convention in which acceleration is . Expand the point-mass potential about the target centre:The constant does not exert a force. The linear term accelerates the target centre and is subtracted in its freely falling frame. The remaining leading quadrupolar point-mass tidal potential isThe condition permits the convergent expansion; using only this term is the leading tidal approximation, accurate when the target radius is small compared with the closest separation.
The given impact and velocity directions imply . This trajectory is in the plane, correcting the incompatible printed plane. In the impulse approximation, hold the stellar position fixed while integrating the tidal tensor:For , the needed integrals arewith the mixed integral zero by oddness. Thus the integrated tidal tensor of a straight-line flyby is andThere is stretching along the impact direction, compression in the other transverse direction and no net kick along the path.
Write for the star's initial velocity, distinguishing it from the perturber speed . Its specific energy change is . The no-correlation assumption removes the first term on averaging; it is not an identity for every individual star. The mean specific heating at a given position is thereforeFor a spherical target, the mass-weighted averages satisfy . The tidal impulse heating of a spherical galaxy is consequentlyHere is assumed finite. Notice the change from specific energy to total energy after multiplying by .
For two equal targets, each gains the same internal energy, so . Their relative-motion reduced mass is . If denotes their relative speed at infinity, their initial orbital energy is . Internal tidal heating comes from this orbital energy. In the tidal capture of galaxies model, capture occurs if , which gives the equal-mass tidal-capture thresholdCapture allows further passages and eventual merger in this simplified picture.
The encounter lasts roughly . The impulse approximation needs , so that a star barely moves during the tide. When , stellar orbits respond during the perturbation and the kicks can cancel. Adiabatic invariance of an orbital action produces adiabatic shielding of tidal encounters, rather than the impulsive heating used above. The capture inequality cannot be extrapolated into that slow-encounter regime.
Past exam of the mathematics course of the University of Cambridge 2016 iii Paper 320 3 Solution Created 2026-10-03 Updated 2026-10-06
A small-angle gravitational encounter between a test star and a field star of mass gives a transverse kick , where is the impact parameter and the relative speed. For number density , encounters in occur at rate . Independent kicks add in mean square, giving the random-walk derivation of stellar relaxationThe Coulomb logarithm in stellar dynamics has of order system size , and of order the strong-deflection scale . For a virialized -star system, , so is of order . The stellar relaxation time is the time for accumulated velocity variance to become comparable with :Using gives . With a diameter-crossing convention , this is , conventionally rounded toThe coefficient is approximate: spatial profile, velocity averages and crossing-time convention change it by factors of order unity. The robust result is crossing times.
For and years, the estimate is about years, enormously longer than a Hubble time. Most galaxies therefore behave as collisionless stellar systems. Dense nuclei and star clusters can relax more rapidly. Negligible stellar encounters do not mean negligible collective gravitational instabilities.
Define the mass-weighted galactic distribution function by , so . Hamiltonian gravitational motion preserves phase space volume by the Liouville theorem in Hamiltonian mechanics. In the collisionless regime no encounter term redistributes stars between neighbouring phase space trajectories, so . With acceleration , the Collisionless Boltzmann equation is
For a steadily rotating galactic bar, write the inertial polar angle as . The inertial radial and angular equations are and . Substitution gives the equations of motion in a rotating frame:Here the velocities are measured in the bar frame. Set , and define the positive-force rotating-frame relative effective potentialThe centrifugal sign is positive in this relative-potential convention. The characteristics areConsequently the rotating-frame collisionless Boltzmann equation isFor these planar equations, integrate over and interpret as the planar or vertically integrated mass density. Define . Boundary terms in velocity vanish for a sufficiently decaying distribution.
Let the velocity accelerations above be . Their velocity divergence is . Thus integration by parts in the zeroth moment contributes , producing the cylindrical continuity equation for a rotating stellar systemThis is conservation of mass: change of density balances flux through the radial and azimuthal sides of a small cylindrical element. The factor is geometric; the physical phase space measure is .
For the radial first moment, multiply the rotating-frame collisionless Boltzmann equation by . Its velocity integrations are and . Hence the radial cylindrical Jeans equations in a rotating frame areFor the azimuthal first moment, the velocity integral vanishes, while . This givesThe Jeans equations are local momentum-balance equations. The second moments include streaming momentum flux and random-velocity stress, while gravity, centrifugal acceleration and Coriolis acceleration supply the frame-dependent forces. They do not by themselves close the full distribution: a stress prescription or a galactic distribution function is also needed.
Past exam of the mathematics course of the University of Cambridge 2016 iii Paper 320 4 a Solution Created 2026-10-03 Updated 2026-10-06
False. Stellar evaporation removes stars above the escape energy after two-body relaxation has redistributed their energies. The remaining self-gravitating cluster need not become less dense; losing mass is not the same as holding its radius fixed.
For a slowly evolving isolated cluster, apply the virial theorem at each approximate equilibrium: . Stars evaporating with nearly zero energy at infinity remove little total energy, so the bound cluster has nearly constant negative . With gravitational radius defined by ,For homologous structure, its characteristic mean density therefore scales asIt increases as mass is lost. Escaping stars carrying positive energy make the bound energy more negative and strengthen the contraction tendency. This is virial contraction under stellar evaporation, related to the negative heat capacity of bound gravitational systems. A tidally limited globular cluster has additional radius constraints, so this scaling is not universal, but the claimed inevitable density decrease is false even in the simplest isolated evaporation model.
Past exam of the mathematics course of the University of Cambridge 2016 iii Paper 320 4 b Solution Created 2026-10-03 Updated 2026-10-06
False as a claimed change between isolated steady endpoints. Conservation of energy by itself would allow a more negative and a larger , but both endpoints must also obey the virial theorem. For a finite isolated equilibrium with no surface term,If total is conserved between the two equilibria, the fixed-energy virial constraint between steady states givesThis includes both ordered rotation and random stellar motion. A galactic bar or other instability can redistribute angular momentum and concentrate a central component, but compensating expansion or rearrangement elsewhere must preserve the global energy constraint. Central concentration alone does not prove that the whole system has a more negative .
A remnant could have different energies if stars escape, or if an external component exchanges energy with it; then the conserved total energy would include that other component. Those cases do not justify treating the bound disc simultaneously as a closed fixed-energy system and as a new equilibrium with increased .
Past exam of the mathematics course of the University of Cambridge 2017 iii Paper 316 1 i Solution Created 2026-10-03 Updated 2026-10-06
Use the separation vector from the star to the comet, and let . The two-body problem separates into uniform centre of mass motion andTaking a cross product with proves conservation of angular momentum; taking the scalar product with proves conservation of energy. The relative constants areThe total relative angular momentum and energy are and , respectively. The conserved eccentricity vector is . Its scalar product with gives , with the true anomaly. The periapsis and apoapsis distances are therefore and . Their sum is twice the semi-major axis, soAt either apsis ; substituting an apsidal radius gives . Thus the specific orbital energy implies the vis-viva equationThese are exact relative-coordinate formulas for an elliptic orbit, . In the barycentric frame the comet's speed is times the relative speed; the printed identification with the comet's stellar orbital speed uses .
Past exam of the mathematics course of the University of Cambridge 2017 iii Paper 316 1 vi Solution Created 2026-10-03 Updated 2026-10-06
On the corrected steady phase-mixed orbit, each fragment crosses a fixed orbital longitude once per orbital period. Hence the cross-sectional-area current through that point isFrom the fractional luminosity of a phase-mixed eccentric wire, . Therefore the area rate at the foreground crossing of the line of sight isOnly the foreground segment blocks the star; the far-side intersection does not add another occultation current. The orbital area current is constant because the line density varies as , even though the local orbital speed varies.
Past exam of the mathematics course of the University of Cambridge 2017 iii Paper 316 2 vi Solution Created 2026-10-03 Updated 2026-10-06
Radiative drag is only one of several loss mechanisms. Around a star, radiation-pressure blowout can eject small fragments; its threshold applies specifically to zero-kick release from a circular parent orbit. Stellar-wind drag and gas drag can drive planetary migration, while sublimation destroys grains approaching high-temperature regions. Collisional cascades destroy or fragment grains and can feed the unbound size range. Planetary scattering can cause ejection, collision with a planet, or a stellar impact; resonant trapping of dust can instead delay planetary migration.
For circumplanetary orbits, collisions with the planet or its satellites, disruption in collisions, and escape under stellar tidal forces are additional losses. Orbits near or outside the Hill sphere need not remain planet-bound. Radiation pressure on circumplanetary dust can excite planetocentric orbital eccentricity or unbind very small grains; it need not act only through slow Poynting–Robertson drag. For charged grains, the Lorentz force in stellar or planetary magnetic fields can alter or destabilize an orbit. Shadowing of circumplanetary dust changes the radiation-force average and can reduce the quoted decay rate. Which mechanism dominates depends on grain size and composition, environment, orbit orientation and the available collision or gas density.
Past exam of the mathematics course of the University of Cambridge 2017 iii Paper 316 2 v Solution Created 2026-10-03 Updated 2026-10-06
Keep constant. A circular circumstellar orbit stays circular in the secular drag approximation, and integrates to . The inspiral time under Poynting–Robertson drag to the stellar surface isThe final expression treats the star as a point, or assumes .
For the coplanar circumplanetary orbit used in the preceding result, , so . The inspiral time of circumplanetary dust to the planet's surface, for , isThus the timescales have the same dependence on stellar flux and , but planetary arrival contains a logarithm of the initial planetocentric radius. It is not always shorter: for a point star, only if . A constant tilted-orbit average replaces three by its appropriate orientation coefficient. Sublimation or other removal can terminate the evolution before either idealized arrival time.
Past exam of the mathematics course of the University of Cambridge 2017 iii Paper 317 2 Solution Created 2026-10-03 Updated 2026-10-14
For a quasistatic spherical star with fixed total mass, the stellar structure equations in radius areHere is the specific entropy of a moving mass shell, and the entropy term accounts for release or storage of thermal and gravitational energy. In thermal equilibrium it vanishes. An equation of state, opacity, energy-generation law and composition evolution close the equations. The absence of mass loss fixes the outer mass coordinate; it does not require the star to be in thermal equilibrium.
The radiative temperature gradient needed to carry the full luminosity isHere the actual temperature gradient is . For uniform composition the Schwarzschild criterion says that a radiative layer is stable if , with marginal stability at equality, where the adiabatic temperature gradient is . Use there. If , convection carries some of the flux. Efficient convection gives ; inefficient surface convection needs a transport prescription and can be superadiabatic. For composition gradients, use the Ledoux criterion, with threshold instead. Here , and , using the mean molecular weight .
Above the thin burning shell, take constant luminosity , constant mean molecular weight , ideal-gas pressure with , and the Kramers' opacity law . Then the temperature equation isTo implement the printed assumption that and are all power laws while retaining mass conservation, write , , and . The mass equation gives ; the ideal gas law gives ; hydrostatic equilibrium gives . The diffusion equation gives . Solving this linear system gives the self-gravitating Kramers power-law envelope:The coefficients can also be matched consistently. If is the core boundary and its enclosed mass,Radiative transfer fixes the constant luminosity throughwhose right-hand side is independent of radius for these exponents. Thus this is a solution of all four envelope equations, not just a dimensional estimate.
Matching the boundary temperature to the isothermal core and extrapolating the idealized power law to the specified photosphere givesFor reference , so the envelope mass is not negligible in this particular solution. The given fixes the core-radius normalization ; a numerical absolute radius needs the unspecified molecular weight. The exponent ratio also gives , so the fully ionized monatomic version of this idealization is convectively stable.
A different common approximation neglects the envelope's self-gravity and sets in the force equation. It cannot obey the exact mass equation with a nonzero density and exactly constant . Under that additional approximation, the same calculation instead givesThis is the constant-core-mass power-law opacity radiative envelope limit, not the full power-law solution with changing enclosed mass. Stating which approximation is used resolves the otherwise different numerical radius ratios.
A compact nearly isothermal core, a thin luminosity-producing shell and a much larger cool envelope describe a shell-burning red giant. The full power-law profile is a deliberately simple model. The Kramers' opacity law and an ionized ideal gas are not reliable at a photosphere; partial ionization, other opacity sources and a convective envelope usually modify real cool giants. The quoted radius ratios are extrapolations within the stipulated model.
Past exam of the mathematics course of the University of Cambridge 2017 iii Paper 320 1 a Solution Created 2026-10-03 Updated 2026-10-06
The stellar relaxation time is the time on which accumulated discrete gravitational encounters change a typical star's velocity by an amount comparable to its original velocity. It concerns two-body relaxation, rather than the much faster orbital evolution in a smooth gravitational potential. A collisionless stellar system requires this time to greatly exceed the duration being studied.
In the straight-line impulse approximation, an encounter at relative speed has transverse acceleration . ThusA small-angle gravitational encounter needs . The transition to order-one deflections is therefore , ignoring factors such as the equal-mass relative deflection. For the spherical estimate ,This is the lower cutoff of the weak-scattering estimate; closer encounters actually occur and require strong-scattering treatment.
The number of encounters in time with impact parameters in is . Independent random transverse directions make mean kicks cancel while their variances add. ConsequentlyEach logarithmic interval contributes equally, giving the Coulomb logarithm in stellar dynamics. Defining a deflection time by variance and setting gives . The paper instead uses an order-one normalization three quarters of this estimate:Both have the same physical scaling. The specified characteristic speed, the word “comparable”, the velocity-distribution average and strong-encounter cutoff do not fix that numerical coefficient uniquely. The crude equal-speed impulse calculation must not be claimed to determine exactly.
For a self-gravitating, approximately virialized system, the virial theorem gives . With , and the stellar crossing time , substitution into the paper's convention givesAn externally dominated gravitational potential or a different structural constant changes this substitution. For an N-body simulation lasting , a tolerable fractional velocity-squared diffusion requires , henceThere is no unique smallest without , the error tolerance and the force prescription. For scale, equality at occurs near ; gives about crossing times. A calculation lasting 100 crossing times therefore needs substantially more than the first threshold to have negligible relaxation. Gravitational softening can raise the effective cutoff and reduce artificial scattering, but it also sets the spatial force resolution.
Past exam of the mathematics course of the University of Cambridge 2017 iii Paper 320 1 c Solution Created 2026-10-03 Updated 2026-10-06
For finite-thickness disk relaxation, assume a well-separated range and approximately virialized self-gravity. The three factors have distinct origins. Replacing the characteristic encounter speed by shortens the diffusion time by : the variance-production rate has one inverse power of speed, and the target random velocity squared has two powers. Concentrating the same number of stars into volume of order , rather than , raises the number volume density by and shortens the time by . Finally, only separations below the thickness sample a three-dimensional encounter geometry. The logarithmic upper cutoff becomes , and therefore the inverse-logarithm time acquires . More distant encounters have the planar geometry and provide a convergent, non-logarithmic correction. A smaller Coulomb logarithm in stellar dynamics actually partly offsets the first two shortenings.
Thus, using the same cutoff for this comparison,For actual point particles the disk cutoff is , whereas the spherical one is ; one must use the appropriate cutoff in each logarithm rather than silently identifying them. For a softened calculation it is instead of order the larger of the weak-deflection scale and the softening length. The formula is not valid when approaches that cutoff.
Write and , with simulation duration and allowed fractional diffusion . Combining the paper's spherical normalization and its comparison formula gives the leading criterionThe spherical comparison logarithm cancels when its numerical convention and a common comparison cutoff are used; order-one shape factors remain approximate. In an unsoftened disk with , . Hence the implicit requirement is , in the regime . For , the stellar relaxation time is of order of the spherical value apart from logarithms; gives a time of order 100 crossing times in this estimate. Negligible relaxation over that duration requires an additional margin. A disk generally needs far more particles than a round galaxy for the same relaxation tolerance; no universal minimum follows without duration, thickness and softening. Collective spiral or bending responses are a separate source of evolution even in a collisionless stellar system.
Past exam of the mathematics course of the University of Cambridge 2017 iii Paper 320 3 b Solution Created 2026-10-03 Updated 2026-10-06
Use the same specified homogeneous Newtonian background and Jeans swindle, but describe stars by a mass-normalized galactic distribution function. The Collisionless Boltzmann equation is . Let and similarly perturb the gravitational potential. To first order,Eliminating and the nonzero gravitational potential amplitude gives the collisionless Jeans dispersion relationFor growing modes there is no real-velocity pole. Real and damped frequencies require a causal contour prescription or analytic continuation; one must not simply integrate through a pole without specifying it.
Take in the Cauchy velocity distribution. Its normalization is . Orient along the axis and integrate over the perpendicular velocities:At the marginal mode , , with its finite limiting value at zero. The provided Gamma function integral at power two givesConsequentlyTo check that this really separates growing modes, put in the upper half-plane. Residue integration, or integration by parts followed by the Cauchy resolvent, gives . The upper-half-plane solution has , which grows exactly for . At the threshold it approaches the marginal mode continuously. Although plays the threshold role of a velocity scale, this distribution's second moment diverges: the radial integrand for tends to a nonzero constant at large speed. It is therefore incorrect to identify with a finite velocity dispersion or to infer this result by substituting an rms speed into a fluid formula.
Past exam of the mathematics course of the University of Cambridge 2017 iii Paper 322 1 i Solution Created 2026-10-03 Updated 2026-10-14
For this stellar population, let denote initial mass in units of the solar mass, and let denote present stellar age. Constant formation of equal numbers of stars per unit time makes the stellar age a uniform distribution on Gyr, so is uniform on . The normalized initial mass function has probability density function for , since . ConsequentlyThese formulae have the stated age and mass domains; outside them the relevant cumulative fractions saturate at zero or one. The probability integral transform makes uniform on : gives . The time-independent initial mass function and constant number formation rate give independence of and . All fractions here count objects, including white dwarfs, using the stipulated stellar evolution law.
A red giant hasThus the mass boundaries are and for positive . Equivalently, for the red giant region runs from to the age cap , and for it runs from to . There are no red giants with . Boundaries have zero probability and their endpoint convention does not affect the fractions. In the uniform square the red giant region is , with triangle vertices , and . The white dwarf region is the triangle .
At fixed , define the conditional probabilities of a red giant, white dwarf and main sequence star by , and . Their interval widths areIntegration over the uniform distribution of age gives the individual-star fractionsThe systems form a coeval binary population: the two binary star components have the same age. Their masses are independent, so has uniform probability density function on and their states have conditional independence given . Unconditional independence of their states would be incorrect: older systems make both evolved states more likely. The law of total probability now givesThe subtraction removes the double counting of systems containing two red giants.
Past exam of the mathematics course of the University of Cambridge 2017 iii Paper 338 1 b ii Solution Created 2026-10-03 Updated 2026-10-06
A star of declination crosses the zenith. Its direction rotates around the celestial pole at , but its actual angular velocity on the celestial sphere is . Consequently the small-angle crossing-gap estimate becomesFor clarity, the factor is the radius of the star's daily circle on a unit celestial sphere; it does not modify the sidereal hour angle rate.
The estimate assumes the required slew is nearly . A more exact ideal symmetric reacquisition calculation is possible. Let the endpoints have hour angles and suppose , small enough that both endpoints are above the astronomical horizon. The horizontal direction components are and . Their shortest azimuth separation isThe minimum ideal gap satisfies ; its angular separation is . Expanding for a fast drive gives the boxed expression. At an equatorial site exactly. At a geographic pole the direction with is stationary, so the crossing argument is inapplicable and the limit is zero. A full near-zenith rate-limited footprint still requires specifying the trajectory and drive model.
Past exam of the mathematics course of the University of Cambridge 2017 iii Paper 338 1 b i Solution Created 2026-10-03 Updated 2026-10-06
Write for one sidereal day in minutes and . An equatorial star at an equatorial site rises along a vertical great circle, passes through the zenith, and descends on the opposite side. Its azimuth changes by at the crossing. The restricted altitude travel prevents following it continuously by rotating over the zenith.
The maximum azimuth rate is radians per minute, so the shortest half-turn takes minutes. During that lost-track interval the star moves throughFor minutes this is approximately ; using a 24-hour day gives . If the quoted zenith blind spot size means the angular radius of a symmetrically placed crossing gap, it is , approximately .
This derives the ideal crossing-gap size with instantaneous acceleration and an available altitude drive. It does not uniquely define a circular forbidden region for all nearby trajectories. For example, at an equatorial site a star of small nonzero declination has maximum azimuth rate at transit: its minimum offset is constrained by . That rate contour and the half-turn crossing gap are different definitions of a zenith blind spot. Actual tracking footprints also depend on acceleration and the reacquisition strategy, as discussed in the telescope designers' tracking discussion.
Past exam of the mathematics course of the University of Cambridge 2017 iii Paper 338 3 b i Solution Created 2026-10-03 Updated 2026-10-20
Use the ideal detection convention of one collected electron per detected photon; otherwise replace photon totals by detected electron totals using the quantum efficiency. Let be the summed measurement on the star patch and the independent background-only patch. After additive offsets are removed, their means are and . Independent Poisson distribution counts have variance equal to their mean, and a single read of detector pixels contributes to each patch's variance. ThereforeThe two factors of two arise from the independently measured background and the second patch's read noise, not from doubling the stellar signal. The formula assumes equal background means, independent detector pixels and patch measurements, one read per patch, and negligible dark current or other noise. Several exposure reads or correlated detector pixels require their own variance and covariance terms.
Past exam of the mathematics course of the University of Cambridge 2018 iii Paper 316 2 iv Solution Created 2026-10-03 Updated 2026-10-05
For a circular Kepler orbit, remains an exact solution of the averaged Poynting–Robertson drag equations, and . Integrating gives , so the point-star inspiral time under Poynting–Robertson drag isFor a star of radius , contact occurs instead at within this model. Sublimation or other forces can remove a real grain earlier.
Past exam of the mathematics course of the University of Cambridge 2018 iii Paper 316 3 v Solution Created 2026-10-03 Updated 2026-10-05
To first order in orbital eccentricity, the semi-minor axis is , while the ellipse's center is displaced from the star by . Thus each orbit is a circle of radius about , in complex spatial coordinates.
Write at one secular epoch. The centers of the individual circles lie on a circle of radius about . Their union is the proper-eccentricity annulusIts full radial width is and its center is displaced by toward the forced apoapsis direction. Relative to the star, if the forced longitude of periapsis is zero,The middle panel of the preceding figure shows this construction. For fully sampled orbital phases and proper phases, the annulus is occupied throughout, but its density need not be uniform; turning points in the proper radial excursion give integrable edge enhancements. The construction requires and is an instantaneous secular geometry.
Past exam of the mathematics course of the University of Cambridge 2018 iii Paper 317 4 Solution Created 2026-10-03 Updated 2026-10-14
Assume an isolated star of initial mass five solar masses of approximately solar stellar metallicity. Rotation, convective overshooting and mass loss change numerical ages and the extent of a blue loop, so the ages below are estimates. Take zero age at the zero-age main sequence; the pre-main-sequence star phase adds a much shorter contraction time.
The original schematic Hertzsprung-Russell diagram marks the stages discussed below. The strip denotes the approximate Cepheid instability strip; the track is illustrative, rather than a computed stellar model.
The main sequence lasts roughly – years. CNO cycle hydrogen burning is concentrated in a mixed convective core. Its declining hydrogen mass fraction and rising helium mass fraction are nearly uniform there, while the retreating core leaves a composition gradient. The unprocessed envelope remains hydrogen rich. At the terminal-age main sequence, core hydrogen is exhausted and a hydrogen-burning shell takes over.
The inert helium core grows through shell burning. The Schönberg-Chandrasekhar limit is approximatelyBeyond this limit an isothermal nondegenerate core cannot remain in thermal equilibrium with its envelope. Core contraction and envelope expansion carry the star across the Hertzsprung gap. An initial slower shell-burning interval can precede the rapid crossing; the crossing itself is governed by Kelvin-Helmholtz contraction, with a representative – years. First dredge-up then mixes hydrogen-processed material into the convective envelope, lowering its hydrogen mass fraction and increasing helium and nitrogen, while leaving a composition discontinuity where the envelope later retreats.
At an age still of order years, core helium burning begins quietly: the core is nondegenerate, so there is no helium flash. The Triple-alpha process and subsequent alpha capture build a carbon-oxygen core. Core helium burning lasts roughly – years in representative solar-composition models. Pols's stellar-evolution notes illustrate the substantial dependence of these lifetimes on convective overshooting.
During a blue loop the envelope contracts and effective temperature increases, before the star returns redward. The loop depends on core and envelope structure and the hydrogen discontinuity left by first dredge-up. A loop reaching the Cepheid instability strip produces two further crossings, blueward and redward, in addition to the earlier rapid crossing of the Hertzsprung gap. Cepheid variables pulsate through the opacity mechanism, involving helium ionization. Neither loop extent nor all three strip crossings are guaranteed for every composition or mixing prescription. The hydrogen-burning shell continues moving outward in enclosed mass while central helium is depleted. Lattanzio's five-solar-mass tutorial shows these composition changes.
After helium exhaustion, at an age roughly – years, the star ascends the Asymptotic giant branch. An inert carbon-oxygen core is surrounded by helium-rich material and a hydrogen-rich envelope. Second dredge-up mixes helium and hydrogen burning products into the envelope and reduces the hydrogen-exhausted core mass. Subsequently a helium-burning shell and hydrogen-burning shell alternate in importance. A thermal pulse of an asymptotic-giant-branch star causes intershell convection, expansion and temporary quenching of hydrogen burning; third dredge-up can carry carbon and slow neutron-capture process products outward. Between pulses hydrogen burning rebuilds the helium layer. These mechanisms are illustrated in Lattanzio's AGB tutorial.
The following original stellar composition profile sketches distinguish hydrogen exhaustion from helium exhaustion; their mass boundaries are illustrative.
Schematic internal composition profiles during stellar evolution
. Details. The final giant phases add at most a few million years at this level of accuracy. Strong stellar winds remove the envelope; the hot remnant can illuminate a planetary nebula and then cool as a carbon-oxygen white dwarf. A typical remnant is of order one solar mass. The ordinary isolated case does not reach sustained carbon burning and core collapse. Thus the usual endpoint is a carbon-oxygen white dwarf, at a total age of order years, with its subsequent cooling age added separately.
Each mutually incoherent patch of an extended star produces a displaced double-slit interference pattern. The detector adds their light intensities. For two apertures separated by a projected interferometric baseline , a source direction offset by a small angle changes their phase difference by . The normalized sum over the source's angular brightness distribution is its first-order optical coherence, whose magnitude is the interferometric visibility for equally bright channels.
For a uniform circular stellar disk of full angular diameter , the normalized angular Fourier transform gives the uniform-disk stellar visibilityHere is the order-one Bessel function of the first kind. This follows by integrating over the disk and dividing by its area. In particular, its power series gives .
For an ordinary slit separation , using the paper's and observing wavelength ,Even gives a visibility loss of only . Thus millimetre separation leaves the interference fringes almost indistinguishable from those of a point source; it gives very little sensitivity to the diameter.
The movable mirrors in the Michelson stellar interferometer collect light at a large adjustable separation and redirect it into closely spaced output beams. They increase the sampling interferometric baseline independently of the fixed output slit spacing : sets sensitivity to source structure, whereas the output optics set the screen's interference fringe spacing. The first Bessel function zero is , henceThe interference fringes disappear at this baseline even though each beam separately remains bright.
The value assumes a uniform disk. The original question supplies a diameter without a surface brightness law; real limb darkening changes the precise visibility zero. A one-dimensional uniformly bright strip of the same full angular width instead has a sinc function visibility and first zero . That is a different source model, not the circular-disk result. The robust conclusion without a surface brightness model is that a baseline of a few metres, rather than millimetres, is required.




