Choose body-fixed principal axes through a fixed point or the centre of mass, with principal moments . Angular momentum has components . The inertial derivative is the body derivative plus , so Euler's equations read
They avoid differentiating the rotating inertia tensor in laboratory coordinates. Torques must refer to the chosen point, and the displayed fixed moments require a rigid body.
For zero torque, laboratory angular momentum is constant, while its components can change in the body frame. Both and rotational kinetic energy are conserved. The intersections of their constant-value surfaces constrain the motion. For distinct , steady rotation about either extreme principal axis is stable against small perturbations, whereas rotation about the intermediate axis is unstable. For example perturbing rotation about axis 2 gives
whose coefficient is positive. A symmetric body has additional simplifications and can precess. Conservation of laboratory angular momentum does not imply constant body-frame angular velocity.
A velocity field assigns a velocity to each point. Following a fluid parcel rather than holding position fixed gives the material or convective derivative
The convective term can accelerate fluid even in a steady flow, for example as a stream narrows. Conservation of mass is ; constant-density incompressible flow has .
For an incompressible Newtonian fluid of constant density and viscosity, with conservative body-force potential per mass , momentum balance is
Neglect viscosity and assume steady flow. Dotting with an element along a streamline, or using , gives
This is Bernoulli's equation: pressure work, kinetic energy and gravitational potential energy interconvert. In a connected irrotational region under the same assumptions, is the same for all streamlines. In a rotational flow it can vary between them. Viscous dissipation, pumps or unsteady motion require the corresponding modified balance; the steady inviscid expression cannot be applied indiscriminately.
Vorticity measures local fluid rotation. For constant-density incompressible flow it evolves by
showing vortex stretching and viscous diffusion. A potential flow has locally, so irrotational incompressible motion satisfies . Boundary conditions then determine flows around simple shapes. A multiply connected region can have circulation even when its local vorticity vanishes; ideal potential flow also misses no-slip boundary layers and viscous drag.
For a Newtonian fluid, shear stress is proportional to strain rate. No-slip at solid walls produces velocity gradients and dissipation. Fully developed laminar pipe flow, for example, has
The Reynolds number compares inertial and viscous terms. Small values favour creeping-flow approximations; large values can permit thin boundary layers and turbulence, without guaranteeing turbulence in every geometry. The appropriate flow model follows from conservation laws, constitutive properties, boundaries and scale comparisons.
For a moving loop, Faraday's law of induction is , where is the local wire velocity, , and the oriented boundary and surface follow the right-hand rule. For a fixed loop the motional term vanishes. Lenz's law is the minus sign: the induced response opposes the change of linked flux, not necessarily the applied field itself.
Let increase downhill and choose positive current to produce an uphill magnetic force. The normal component of the imposed field is , so the changing external flux is . With initially zero current and no resistance, conservation of flux linkage gives . The rod feels gravity vertically downward, a rail reaction normal to the slope, and magnetic force of magnitude horizontally uphill. Its downhill component is ; its normal component presses the rod into the rails, giving .
The inductive oscillation of a sliding rod on inclined rails follows from
The magnetic force is not itself parallel to the rails. Defining and , release from rest gives
The first stop occurs at ; the rod then returns and oscillates between and . At the force is zero but the speed is maximal. Mechanical potential energy is reversibly exchanged with kinetic energy and ; a perfectly conducting circuit provides no damping.
For the resistive long-time drift of an inductive sliding rod, with loop resistance , use
Joule heating damps the transient oscillation. On sufficiently long rails the asymptotic motion is steady sliding, not permanent rest:
The zero-resistance model has persistent oscillations; its late-time limit cannot be interchanged with taking . These results assume , smooth contacts, negligible rod self-inductance and constant geometry.
Figure 1.
Original rod force resolution and calculated ideal inductive oscillation along the slope
. Details.
A normal mode is a pattern in which all coordinates share one frequency and fixed relative amplitudes. For a conservative linear system, it solves a generalized eigenvalue equation with stiffness matrix and mass matrix . For this free three-mass spring chain,
Solving , for , gives
Their overall normalization is arbitrary; distinct modes are orthogonal in the mass inner product. The zero mode is rigid translation because neither end is fixed. In the antisymmetric mode the middle mass stays still, so changing its mass cannot alter the frequency. The symmetric internal mode keeps the centre of mass fixed through its middle displacement . Its frequency rises without bound as and approaches as , becoming degenerate with the antisymmetric frequency in that limit.
For equal masses put and . Positions are equilibrium positions plus displacements
The translational mode needs the linear-in-time term; a cosine at zero frequency alone would miss arbitrary centre-of-mass velocity.
Taking the springs initially at equilibrium, the impulse gives . Their squared Euclidean norms are , so their initial kinetic energies are . Relative to total ,
Subsequent motion conserves each mode's total energy, exchanging its kinetic and spring contributions. The zero-mode share remains centre-of-mass kinetic energy.
Figure 1.
Original displacement-vector sketches and mass-ratio dependence of the free three-mass chain modes
. Details.
For isotropic planar motion, the planar effusion flux gives an escape rate through a gap of width is , where is tray area. At fixed equilibrium kinetic energy, or fixed shape of the scaled speed distribution, . Hence halving the mass increases the rate by . This planar effusion result assumes the same spatial density and an unrestricted small opening. Strictly, average energy alone fixes , not ; an arbitrary change of distribution shape would need more information.
For two bodies interacting through , define
Their kinetic energy separates exactly:
Without external forces, the centre of mass moves uniformly while . The relative orbit is a one-body problem with reduced mass , not generally either individual mass. For , ; for equal masses , . If the interaction is central, relative angular momentum is conserved and the relative motion is planar.
A central potential conserves angular momentum and confines a nonradial orbit to a plane. With reduced mass , the radial motion obeys
Turning points satisfy . A radially bounded allowed interval gives bound motion, whereas an interval reaching infinity permits escape. The energy sign alone classifies these only with suitable assumptions about and barriers. Circular orbits satisfy and are radially stable when . Bound orbits in a general central potential need not close: successive periapses can precess.
For attractive inverse-square gravity, and
Ellipses have , , and the attracting centre at a focus; parabolic and hyperbolic escape have and . Conservation of angular momentum gives equal swept areas in equal times. The inverse-square law additionally yields . These are Kepler's laws; a harmonic central potential is another example with closed bound orbits, while generic central laws produce precession.
In a gravitational assist, a spacecraft's asymptotic speed relative to a planet is approximately unchanged but its direction turns. Transforming to the frame in which the planet has velocity gives
The spacecraft can gain or lose orbital energy; the planet supplies the compensating energy and momentum, with a very small velocity change because of its large mass.
Repulsive Coulomb scattering instead has . For incident relative kinetic energy and impact parameter , the hyperbolic orbit gives
This Rutherford scattering formula follows by equating the incident annulus to the scattered solid-angle ring. It assumes classical elastic scattering by a point Coulomb centre; screening, finite nuclear size or quantum effects can change the applicable regime.
For the attractive inverse-square force, choose zero potential energy at infinity, so . At either radial turning point , the kinetic energy is purely tangential, with conserved angular momentum . Thus
Its two roots are the periapsis and apoapsis distances. Their sum is , whereas the ellipse has . Therefore , with for a nondegenerate bound ellipse. The circular case follows by the double-root limit.
For the two-body problem, define , total mass , reduced mass , and center of mass . The relative equation is , while the isolated center of mass has . Once the relative orbit is known,
The relative energy uses in its kinetic energy and in the gravitational potential energy.
In the equal-mass case the initial relative speed is , , and the center-of-mass velocity is half B's initial velocity. Thus
Negative relative energy requires . The escape threshold is ; equality is marginal parabolic escape, so a strictly bound pair has .
For , and the relative semimajor axis is . The initial transverse speed is below the relative circular value , so the initial turning point is apoapsis. Hence
Choose the initial separation along from A to B, with B's initial velocity . Conservation of angular momentum gives relative periapsis speed . At the opposite end of the ellipse the direction is , so
Thus B has the same speed as initially but the opposite velocity. A has at that instant. A value for B would be its center-of-mass-frame speed, not the requested initial laboratory frame result.
The relative orbital period follows from Kepler's third law with total gravitating mass :
In the center-of-mass frame each star follows an ellipse of semimajor axis and eccentricity , with the center of mass at a focus; they remain opposite on their simultaneous position vectors. In the laboratory frame add the uniform drift along . The laboratory paths of an equal-mass binary are therefore not closed ellipses, even though their relative motion repeats.
Figure 1.
Equal-mass binary trajectories in the center-of-mass frame and the original laboratory frame
. Details.
In Lagrangian mechanics, choose independent generalized coordinates compatible with the mechanical constraints, write , and apply the Euler-Lagrange equation
Equivalently, the physical path makes the action stationary under variations with fixed endpoints. For ideal holonomic constraints, their unknown reaction forces need not appear in the reduced equations. Direct use of Newton's laws of motion instead resolves vector forces and reactions and enforces the constraints separately. Both approaches describe the same mechanics; the scalar Lagrangian is often shorter in curvilinear coordinates. Nonconservative generalized forces must be added separately. Here a drive maintains the prescribed azimuthal angular velocity .
The mass has polar speed and azimuthal speed , so its kinetic energy is . The elastic potential energy is , and the height is , giving gravitational potential energy . Therefore
and the Euler-Lagrange equation gives
For , define and , so . Near zero,
When the upright equilibrium is linearly stable and the small oscillations have .
For , the graph of initially rises, whereas . There must therefore be a zero inside the interval. More strongly, for ,
is strictly decreasing: decreases and increases because . The ratio goes from to , giving exactly one zero in that interval. At the zero, , so it is a stable equilibrium. The rotating torsion-stabilized inverted pendulum also has a symmetric stable angle if both signs of tilt are permitted.
Figure 1.
Acceleration curves after the upright instability and the quartic potential at the threshold
. Details.
At , setting gives , so
For , the linearized equation is . Since ,
At the threshold the linear restoring term vanishes, but the cubic term remains:
The upright state remains nonlinearly stable, with no nonzero infinitesimal harmonic frequency. Small finite disturbances produce quartic oscillator motion whose frequency is proportional to its small angular amplitude; its period tends to infinity as that amplitude tends to zero. Zero linear stiffness is not the same as an absent restoring torque.
For entropy gain from impact and thermal equilibration, let the large lake be a reservoir at an initially unspecified temperature , in kelvin, and take the final meteorite temperature to be . Its initial temperature is . The meteorite loses thermal energy , and its kinetic energy is also dissipated into the lake. Thus
and
Both heat equilibration and dissipation contribute positively. For the requested estimate, assume a lake temperature . This gives . Taking – instead gives about –; this shows the estimate's sensitivity without asserting an unprovided lake temperature. The boxed expression retains the full temperature dependence. The model uses the stated constant heat capacity, no phase change of the meteorite, and a lake large enough that its temperature change is negligible.[ref]
For steady, inviscid, incompressible flow, Euler's equation integrated along a streamline gives
This is Bernoulli's equation. The constant is common to different streamlines if the flow is also irrotational; incompressibility alone does not imply that. Viscous loss or work by a pump requires additional terms.
A Pitot-static tube compares stagnation pressure at a forward-facing opening with nearby static pressure . For equal height, the stagnation point has , so
This measures flow speed when compressibility corrections are negligible.
In a flowmeter using the Venturi effect, continuity gives . For a horizontal constriction with , Bernoulli gives , hence
The fluid accelerates and static pressure falls in the throat. This is a second practical application of the conversion between pressure and kinetic energy; real instruments need calibration for flow losses.
The Boltzmann distribution assigns probability to each microstate. For the equilibrium height distribution in a uniform gravitational field, take a dilute gas above a floor in a constant gravitational field. Uniform cross-section and no relevant upper boundary give the normalized height density
Thus
The gravitational potential is linear in height, so its mean is not a quadratic-mode contribution of .
The equipartition states that each independent quadratic term in a classical equilibrium Hamiltonian contributes mean energy , provided the relevant degrees of freedom are thermally accessible. Equivalently, when the phase-space integration by parts has vanishing boundary terms. Three translational velocity components therefore contribute .
For rotational equipartition in a rough-ball gas, collisions exchange both translational and rotational energy. In the intended three-dimensional classical equilibrium model there are three translational and three rotational quadratic terms, giving in total kinetic energy per ball. Adding , and conserving the initial energy per ball, gives
Roughness is relevant because it allows rotation to thermalize. The effective mechanical temperature of released rough balls describes the balls' mechanical degrees of freedom, not their internal material temperature; finite ball size and excluded-volume effects are neglected.[ref]
The height tail is
This can be nonzero because collisions redistribute energy between balls; an individual ball is not restricted to its original energy. The exponential distribution is the large-number statistical approximation under the stated effective-equilibrium assumption.
Figure 1.
The thermal height distribution puts about 1.83 percent of the rough balls above their release height
. Source. Details.
Use peak phasors with time dependence , real positive electrical conductivity , and absolute permeability . Ampère-Maxwell equation and Faraday equations give
so . The sign of the imaginary term follows from the stated time convention. For a transverse plane wave in a homogeneous conductor,
In the good-conductor limit, choose the root that decays into :
The electric phasor and physical field are consequently and , as required. Tangential boundary matching sets ; it need not equal the incident amplitude.
Faraday's law fixes the magnetic field, including its phase:
For real and , this means , with other components zero. The time-averaged Poynting vector is
The energy entering a thin slab exceeds that leaving it by per unit volume, giving
Directly, and at each time. Therefore is exactly this loss. The factors one half use peak rather than root mean square phasors; amplitude decays over , while intensity decays over .
For a cold collisionless unmagnetized plasma, electron inertia gives and real . Above the plasma frequency the wave propagates without this resistive attenuation. Below it, a semi-infinite plasma supports an evanescent field with electric and magnetic components in quadrature and zero mean inward energy flux: the incident energy is reflected, not absorbed as Joule heating. electron kinetic energy is reversibly stored, so the nondispersive dielectric field-energy formula alone is incomplete. Collisions introduce a real dissipative electrical conductivity and can produce absorption.[ref]
irrotational flow has , so locally ; the simply connected fluid domain here permits a globally single-valued velocity potential. Incompressibility gives , hence . In a multiply connected domain, zero local vorticity alone would not rule out circulation and a multivalued potential.
Take so the disturbance decays at depth. Differentiating the given candidate potential yields
The and second derivatives of cancel in the Laplacian. At , , so the linearized kinematic free-surface condition holds. This uses ; advection of the displaced surface is higher order.
Since , the local squared speed is . The depth integral is therefore
It is independent of horizontal position; no further spatial average is needed for this kinetic energy. Replacing the upper boundary by zero changes it only beyond quadratic order in amplitude.
Relative to the flat surface, the gravitational energy at each horizontal position changes by . Averaging over one wavelength gives
The energy of a deep-water standing gravity wave, averaged over wavelength, is and must be constant for a free inviscid standing wave, which requires equal coefficients of the complementary squared sine and cosine:
As an independent check, the linearized dynamic boundary condition at gives exactly . Infinite depth, negligible surface tension and no dissipative forcing are part of this gravity-wave model.
For two bodies interacting through a potential energy that depends only on their separation, introduce the centre of mass coordinate and the two-particle relative coordinate:
Their kinetic energy separates exactly:
The centre of mass moves uniformly if there is no external force, while the internal two-body problem reduces to one effective particle of reduced mass :
The original trajectories follow from and .
For Newtonian gravity, , so the relative acceleration is . Conserved relative angular momentum and energy then give the usual conic sections. For a bound orbit of relative semimajor axis ,
The two bodies share this orbital period and orbit their common centre of mass with semimajor axes in inverse proportion to their masses. If , then , recovering the fixed-heavy-centre approximation. Using as the internal inertial mass would confuse centre-of-mass translation with relative motion.
The energy average must be taken over the atoms that actually arrive, not over the bulk population. Weighting the collision flux by gives
The wall-impact speed distribution is proportional to rather than the bulk . Faster atoms are overrepresented among arrivals. Equivalently, the mean normal kinetic energy of the arriving flux is , while each tangential component still contributes .
For the two unlabelled follow-up requests, distinguish re-equilibrating effusion from collisionless effusion. The calculations below show that escaping atoms carry mean kinetic energy , whereas a bulk atom has mean kinetic energy . If the aperture is small and interatomic collisions maintain near-equilibrium conditions, faster atoms escape preferentially, and the remaining gas relaxes toward a lower-temperature Maxwell-Boltzmann distribution. No heat supplied by the walls is available to replace the lost energy.
For a monatomic gas at fixed container volume, conservation of energy gives a quantitative check on this effusive cooling picture:
Since , the temperature falls. Under these idealizations ; the gas is not left with a permanently truncated velocity tail when collisions rapidly restore equilibrium.
If interatomic collisions are absent, the individual surviving atoms do not rethermalize to a new common temperature. Their speed distribution becomes selectively depleted, generally favouring slower survivors, and their angular and spatial distribution can also develop structure determined by which trajectories reach the hole. A single lower temperature does not describe the full nonequilibrium distribution. With a direction-randomizing but energy-preserving wall model, an illustrative survival law is ; specular walls can give more detailed directional selection and even persistent nonescaping trajectories. The question supplies no wall-scattering or container-geometry model from which a unique collisionless loss law could be inferred.
For the labelled wall integrals, choose the polar axis toward the wall so that incoming atoms have , and put
The needed radial integrals are , and . They are related to the supplied integrals by rescaling the speed.
Cold air is denser than room air at approximately the same pressure. The ideal gas law gives a fractional mass density contrast of order . The initial outflow is therefore a gravity current driven by reduced gravity
For an illustrative refrigerator height , room temperature and temperature difference , this gives . Balancing the released potential energy with kinetic energy gives . The buoyancy exchange time of a cold-air enclosure is consequently
Using constant acceleration over height gives , consistent at this level. Warm air enters as cold air leaves, so unrestricted vacuum free fall is not the right acceleration model. No dimensions or temperatures are specified in the source, so an order-of-magnitude estimate with explicit representative values is the appropriate result; shelves and mixing can delay complete replacement.
Radial energy and effective potential. For a central force with potential energy , angular momentum conservation fixes and confines motion to a plane. The kinetic energy separates into radial and angular parts, giving
The second term is the centrifugal barrier. It converts the radial motion to a one-dimensional energy problem: allowed radii have , turning points have equality, and a circular orbit occurs at a stationary point of . Stability of that radial orbit requires a local minimum.
The first-order orbit equation. Write . Since , choose zero potential at infinity to get
Also . Substitute this into the energy equation and multiply by :
Here has units of length. A regular bound orbit with a centrifugal barrier requires as well as the appropriate negative energy.
Solving in inverse radius. Let and define
Dividing the first-order equation by gives
Differentiating, or directly using the Binet equation, gives . The continuation through turning points follows from this smooth second-order equation. Its noncircular bound solution, with angular origin at a pericentre, is
Substitution into the first-order equation fixes the amplitude through this . Therefore the requested representation holds with
since . A general angular origin replaces by . This is the orbit equation for combined inverse-square and inverse-cube attraction. The circular limit is regular in but is not represented by finite in the source's normalized cosine form.
Precession and the inferred length. The last expression immediately gives
Successive pericentres occur after angular advance , so the apsidal precession per orbit is
For near one, . Inferring an inverse-cube perturbation from apsidal precession consequently gives . For the stipulated nearly circular approximation, , and Kepler's third law gives
using , and . A century contains about orbits. Convert the observed advance to radians per orbit before using it:
Hence
The positive sign strengthens the attraction and gives prograde precession. The fractional perturbation validates the small-deviation expansion. This is the parameter fitting the proposed phenomenological force law under the specified small-eccentricity approximation, not a derivation of that law as the physical explanation of Mercury's anomaly.
Normal-mode idea. Near a stable equilibrium, expand the potential energy to quadratic order and the kinetic energy as a quadratic form in generalized velocities. The Euler-Lagrange equations then take the linear form . A normal mode has fixed displacement ratios, , with . Real systems admit this description for sufficiently small motion, before higher-order nonlinearities or strong damping matter. Superposition permits a general motion to be assembled from the modes. A free symmetry direction may instead be a zero mode, with constant or linearly changing coordinate.
Lagrangian and bead equations. Take each as an arc-length displacement positive in the same sense around the fixed circular wire. Spring length changes are , and . Equal equilibrium spring tensions give no net tangential force; their linear energy terms sum to zero. Dropping an irrelevant constant, the Lagrangian is
For example, differentiating the potential with respect to gives . The three Euler-Lagrange equations therefore are
The wire supplies normal constraint forces but does no tangential work. These are the equal-mass case of the normal modes of three beads connected by springs on a circular hoop.
Frequencies. The stiffness matrix divided by is
It annihilates . On the two-dimensional subspace , its action is multiplication by three. Thus the angular frequencies of the normal modes are
The repeated frequency is a degeneracy of normal modes, while the zero frequency expresses free rigid rotation of all beads along the wire.
General solution. Two independent vectors spanning the vibrating subspace are and . Each amplitude satisfies , with . The uniform coordinate satisfies . Hence
The six freely specifiable real constants give the six initial data; is fixed by and is not an additional independent integration constant. The linear zero-mode term must be included to allow nonzero total tangential momentum.
Shapes and uniqueness. In the first term beads 1 and 2 have opposite equal displacements and bead 3 remains at its equilibrium position. In the second term beads 1 and 3 do this while bead 2 stays fixed. The last term moves all three identically, leaving spring extensions unchanged: is a rigid phase shift and a uniform drift around the wire. The sketches show positive modal amplitudes; all arrows reverse half a vibration period later.
Figure 1.
Original displacement sketches for two independent equal-frequency bead modes and the rigid-rotation zero mode; arrows indicate displacement along the ring rather than its radius
. Details.
The two nonzero-frequency eigenvectors are not unique, because any independent linear combinations in their degenerate two-dimensional eigenspace form an equally valid basis. In particular the displayed pair is independent but not orthogonal; one could use and instead. The zero eigenspace is one-dimensional, so its vector is fixed up to scale and sign.
Specified release. Zero initial velocities permit and require . At , the three displacement conditions become , , . Therefore one convenient set of constants is
Equivalently,
Their sum remains , as required by zero initial total tangential momentum. Alternative amplitude signs with compensating phase shifts represent the same motion.