Thin-film interference 2026-10-18
Thin-film interference combines coherent light contributions reflected or transmitted at the two surfaces of a layer. For a film of refractive index , thickness and internal angle , the round-trip optical path difference is . The relative reflection phase shift must also be included. For a nonabsorbing higher-index film surrounded by air, one of the two leading reflected contributions has a phase shift and the other does not. Reflection maxima therefore satisfy . A smooth reflection spectrum filters many visible wavelengths at once; varying thickness and angle produce spatially varying mixed colours.
Thin lens Created 2026-10-05 Updated 2026-10-14
A thin lens models an optical lens by collapsing its refracting surfaces into one plane, neglecting thickness relative to the relevant radius of curvature values and object and image distances. Here use an ideal converging thin lens in air and the paraxial approximation: light rays make small angles with the optical axis, so Snell's law can be linearized using the small-angle approximation. Equal surrounding refractive indices on both sides give the familiar symmetric equation.[ref]
Put the thin lens at , with incident light travelling to the right. An object at has . The image coordinate is : for a real image and for a virtual image. The converging thin lens has focal length , and heights are signed relative to the optical axis. The thin lens equation and transverse magnification areThe expression for requires . Negative transverse magnification means inverted; positive transverse magnification means upright. Remember that the positive distance differs in sign from the object's coordinate . [ref]
https://openstax.org/books/university-physics-volume-3/pages/2-4-thin-lenses. Ling, Sanny and Moebs, OpenStax University Physics Volume 3, §2.4: Sign conventions
.For focal length , object distance , and object height , calculation givesThe real image is inverted, half as tall, and located to the right of the thin lens. A screen at that position receives the image because the outgoing light rays actually meet there.
For the same focal length and object height , move the object inside the front optical focus, to . ThenThe virtual image is upright, twice as tall, and apparently to the left of the thin lens. Outgoing light rays still travel to the right; only their backward extensions intersect at the virtual image. A screen there cannot collect that image from the outgoing bundle. This geometry explains why a converging optical lens can act as a magnifier when held close to an object. [ref]
https://openstax.org/books/college-physics-2e/pages/25-6-image-formation-by-lenses. Urone and Hinrichs, OpenStax College Physics 2e, §25.6: Virtual images inside the focus
.Both diagrams use two rules for ray tracing. A light ray from the object's tip parallel to the optical axis reaches the thin lens at and exits along the straight line through the rear optical focus . Another light ray through the centre continues undeviated in the ideal thin lens model. Their intersection, or the intersection of their backward extensions, locates the image tip. [ref]
https://openstax.org/books/university-physics-volume-3/pages/2-4-thin-lenses. Ling, Sanny and Moebs, OpenStax University Physics Volume 3, §2.4: Ray tracing
.A short geometric proof outline makes the signs transparent. The two outgoing straight lines areFor nonzero , equating their heights at gives , hence the thin lens equation; the centre light ray gives , hence the transverse magnification. This derives the image equations from the ideal ray tracing rules, whose physical justification comes from Snell's law in the paraxial approximation.
At , the two outgoing straight lines are parallel: there is no finite image position. For the real image has ; for the virtual image has . These cases let an optical camera designer choose a receiving position and let a user understand a magnifier. An actual optical lens has finite apertures, which cause diffraction and impose diffraction-limited resolution; optical aberrations can further blur the image. The diagrams are ideal geometrical optics, with exact coordinates within that model, rather than exact predictions of Maxwell's equations. [ref].
Thomas Young (scientist) Created 2026-10-24 Updated 2026-11-05
Thomas Young developed the wave account of optical wave interference. His Bakerian lecture, read in 1801 and published in 1802, relates reinforcement and cancellation to the relative arrival of waves. In modern notation, two equal-amplitude coherent light fields give , where is their relative wave phase. The dark fringes are therefore a measurable consequence of adding fields before calculating intensity. This is a modern expression of the interference principle, rather than a quotation of his notation.[ref]
On the Theory of Light and Colours by Thomas Young. 1802, Proposition VIII, coincident undulations and interference; modern equal-amplitude example
A physicist appointed professor of natural philosophy at the Royal Institution in 1801.[ref]
Young; Thomas (1773–1829); physician, physicist and Egyptologist by Royal Society. Activity, Career: interference research and appointment as professor of natural philosophy in 1801
Portrait of Thomas Young (scientist)
. Henry Perronet Briggs, 1822, after Thomas Lawrence; commissioned by Hudson Gurney. Public domain: PD-Art, life plus 100 years and U.S. publication before 1931. Source usage terms, via Wikimedia Commons. Source. Three-level laser 2026-10-18
A three-level laser pumps emitters out of their ground state into a higher pump state, which rapidly relaxes into the upper lasing state. The lower lasing state is the ground state itself. Photon absorption on the lasing transition therefore competes with stimulated emission until enough emitters have been removed from the ground state. This is the ground state depletion problem implicit in population inversion.
The model below treats nondegenerate lasing energy levels with equal absorption and emission cross-sections. Its inversion condition is . Real materials require the relevant sublevel populations, degeneracies and transition strengths; the simple half-population condition should not be imposed on every optical transition. Extra levels let the pump and the emitted light act on different transitions, avoiding the steady two-level saturation limit discussed in population inversion.
Three-to-one mass double-pendulum modes Created 2026-10-20 Updated 2026-10-25
An upper mass and lower mass joined by equal light strings of length have small-angle mass and stiffness matrices and . The squared frequencies are and , with angular eigenvectors and respectively. Equal-angle release decomposes with coefficients and . The angles are measured from vertical, not between strings.
T. M. Graham Created 2026-10-24 Updated 2026-11-05
An experimental physicist who coauthored a programmable neutral-atom quantum computer demonstration. Focused light beams addressed individual qubits in a two-dimensional array, while interactions between Rydberg atoms enabled entangling operations. The experiment combined quantum logic gates into quantum algorithms, testing whether a collection of controlled chemical atoms could execute complete circuits.[ref]
Multi-qubit entanglement and algorithms on a neutral-atom quantum computer by T. M. Graham and others. Abstract: scanned addressing beams, hyperfine qubits and programmable gate-model algorithms
Tomi K. Baikie Created 2026-10-20 Updated 2026-11-05
Tomi K. Baikie coauthored research on photosynthesis.[ref]
Photosynthesis re-wired on the pico-second timescale by Tomi K. Baikie and others. publication title and author list
Photosynthesis captures light energy and transforms it into chemical forms that a biological cell can use. In plants, algae and cyanobacteria, this supports carbon fixation: incorporation of carbon from carbon dioxide into chemical compounds used to build living material. Capturing light and incorporating carbon are distinct processes coupled through metabolism. See OpenStax Biology 2e, 8.1: overview of photosynthesis.
Total internal reflection Created 2026-09-29 Updated 2026-10-18
Total internal reflection occurs when a wave travels from higher to lower refractive index above the critical angle for total internal reflection, leaving no propagating transmitted plane electromagnetic wave normal to the interface.
At an infinite planar interface, total internal reflection returns all incident normal power in the reflected plane electromagnetic wave. Assume homogeneous dielectrics with isotropy, linearity, no dielectric loss, magnetic permeability , and positive real refractive indices . Above the critical angle for total internal reflection, both TE polarization and TM polarization have unit optical reflectance despite the external evanescent wave.[ref]
Interactive Optics by Sander Konijnenberg, Aurèle J.L. Adam and H. Paul Urbach. Basic Electromagnetic and Wave Optics, Total Internal Reflection and Evanescent Waves, equations (153)–(158)
This makes total internal reflection useful for guiding light in an optical fiber: suitable internal incidence angles keep energy inside successive boundaries. Its more surprising feature is that perfect optical reflectance coexists with an external electric field. The evanescent field in total internal reflection can interact with a nearby object, as the frustrated total internal reflection experiment demonstrates.
For an original idealized example, choose , at vacuum wavelength . At angle of incidence , Snell law for electromagnetic waves gives an angle of refraction , so a transmitted light ray still emerges. At , its direction becomes tangent to the boundary. At , the proposed sine of a real angle of refraction would be : the transmitted wavevector must instead have an imaginary normal component. These are predictions for the stipulated media, not measured properties of a particular block.
Constructed ray geometry just below, at, and above the critical angle for refractive indices 1.5 and 1; arrows indicate directions rather than relative powers
. Details. A real semicircular-block experiment isolates this threshold. The University of Maryland laboratory instructions place a laser, motor-driven rotation stage and photodetector together; an aperture limits the detector voltage. The semicircular block is centered on the rotation axis, with the photodetector aligned along its flat face. The instructions identify a strong grazing-beam signal and a weaker signal just before the critical angle for total internal reflection. The readout is detector voltage versus stage angle. Retracing the incident laser beam identifies normal incidence for alignment.[ref]
Snell’s law and total internal reflection laboratory instructions, University of Maryland Department of Physics. pp. 1–2, alignment procedure and Total Internal Reflection apparatus and detector instructions
The semicircular shape supplies a geometric control: a light ray passing radially through the curved face enters at normal incidence, avoiding additional entrance refraction. The weaker signal near the flat face locates a limiting angle of refraction; a vanishing remote-detector signal alone would not establish that the external electric field vanishes. Beam width and alignment limit angular resolution; no measured threshold or decay depth is supplied.[ref]
Snell’s law and total internal reflection laboratory instructions, University of Maryland Department of Physics. p. 1, beam-position uncertainty prompt; p. 2, semicircular-block geometry and near-critical signal
Transillumination Created 2026-10-31 Updated 2026-11-05
Transillumination examines internal structure using light transmitted through a body region or specimen. The source illuminates one side and the observer or detector records light emerging after propagation through the material. Different optical absorption and scattering properties can create image contrast.[ref]
Transillumination in the MeSH thesaurus by National Library of Medicine. descriptor D014172: passage of light through tissues or cavities to examine internal structure
A simple physical demonstration illuminates a fingertip from behind and observes the diffuse transmitted glow. Its appearance depends on wavelength, path length and the tissue's optical properties. Strong scattering redistributes the paths, so a brightness difference cannot generally be interpreted as a sharply localized anatomical boundary without an additional model.
Transit radius 2026-11-05
The transit radius is the effective radius inferred from the fraction of stellar radiative flux blocked during an exoplanet transit. For a uniformly bright star, a completely overlapping opaque planet gives transit depth . Thus a one-percent depth corresponds to a radius ratio of about one tenth.
Real inference accounts for limb darkening, transit geometry and contaminating light. A planetary atmosphere can make the effective occulting area depend on wavelength: a grazing ray traverses a long slant path, so absorption need not correspond to one sharply defined material surface. A quoted transit radius therefore belongs to a measurement band and a stated model.[ref]
Analytic Light Curves for Planetary Transit Searches by Kaisey Mandel and Eric Agol. Sections 2, 4 and 5, geometry, limb darkening and small-planet approximation
Translucency 2026-10-25
Transmittance 2026-10-14
Transmittance is the fraction of incident radiant flux transmitted through a specified object or boundary. Specify wavelength, angle of incidence, electromagnetic polarization and which outgoing light is collected.
T. W. Ebbesen 2026-11-05
T. W. Ebbesen is Thomas W. Ebbesen, a physical chemist whose research links optics with nanostructured materials. His institutional biography describes work in light–matter interactions at Strasbourg, and the Kavli Prize identifies his 2014 nanoscience award.[ref]
https://isis.unistra.fr/equipes/ebbesen-nanostructures/. University of Strasbourg, Thomas W. Ebbesen biography
[ref]https://www.kavliprize.org/bio/thomas-ebbesen. Kavli Prize, laureate identity and 2014 award
With collaborators, he reported unusually strong transmission through periodic arrays of holes smaller than the incident wavelength. They fabricated holes in metal films and measured transmitted spectra, including their dependence on illumination angle. The observations supported coupling between incident light and electronic excitations at the patterned surface, helping establish an experimental route into plasmonics.[ref]
Extraordinary optical transmission through sub-wavelength hole arrays by T. W. Ebbesen and others. Nature 391, 667–669, 1998: abstract and Figures 1–3
The normalization is essential to understanding the result. Transmission compared with the small total hole area can exceed the expectation for independent tiny apertures, or even exceed unity under that area normalization. This does not mean more optical energy emerges than was incident on the entire sample. The array and surrounding metal participate in collecting and coupling the electromagnetic field, so aperture area alone is an incomplete predictor.[ref]
Extraordinary optical transmission through sub-wavelength hole arrays by T. W. Ebbesen and others. Page 667: area-normalized transmission and surface-plasmon interpretation
Twin paradox simultaneity change 2026-10-14
During either inertial leg, the traveller can correctly say that the moving home clock runs slowly. The missing step is deciding which distant home-clock reading is simultaneous with turnaround. By the Lorentz transformation, the outward inertial frame's constant-time line through obeys . At it meets the home world line atFor the return inertial frame, use through the same spacetime event ; its home-clock assignment isThe dashed lines in the spacetime diagram illustrate this relativity of simultaneity. For and , they assign and to the home clock. The difference of is a change in the traveller's distant-time assignment, not a sudden physical advance of the home clock.
On each leg, the traveller's of proper time corresponds to of home-clock advance according to that leg's inertial frame. Including the twin paradox simultaneity change gives , exactly the reading at reunion. Actual received light signals remain continuous across a physical turnaround; their arrival times are distinct from the distant spacetime events assigned as simultaneous by Einstein synchronisation.
Two-element polarization identification Created 2026-10-20 Updated 2026-10-20
Suppose the unknown ideal elements are a linear polarizer and a quarter-wave plate, and the two unknown sources are unpolarized and circularly polarized. Test both element orders while rotating their relative axes and monitoring output intensity. Only circular input followed by the quarter-wave plate and then the polarizer gives complete modulation: the plate makes linear light and the analyzer obeys Malus's law. Polarizer-first output is constant half-intensity because the following lossless plate changes polarization but not intensity. Unpolarized input is constant in either order. This identifies both elements and both sources without comparing source brightnesses.
Ultraviolet Created 2026-10-05 Updated 2026-10-20
Ultraviolet is electromagnetic radiation with wavelengths shorter than the violet end of ordinarily visible light. The CIE convention uses –, subdivided into UV-A at –, UV-B at – and UV-C at –. These divisions name intervals; they do not mark universal changes in every material's response. The boundary with visible light is not sharp, and other fields use near-, far-, vacuum- and extreme-ultraviolet divisions. [ref]
https://cie.co.at/eilvterm/17-21-008. CIE, International Lighting Vocabulary (2020), ultraviolet radiation: ranges and boundary caveats
. For example, NASA's Solar Dynamics Observatory observes extreme-ultraviolet bands below ; the CIE interval is therefore not the full extent of astronomical ultraviolet usage. [ref]https://sdo.gsfc.nasa.gov/data/channels.php. NASA, Solar Dynamics Observatory HMI and AIA channels: the Atmospheric Imaging Assembly's ultraviolet and extreme-ultraviolet bands
.The CIE ultraviolet interval corresponds to frequencies about – and photon energies –, using vacuum wavelength and with Planck constant and speed of light . Shorter wavelength means larger energy per photon; larger irradiance means more incident power per area. These are different comparisons. At the same incident power, a ultraviolet beam has fewer photons per second than a infrared beam, even though each ultraviolet photon has more energy.
A common ultraviolet mechanism is photon absorption promoting an electron from a ground state to an excited state of a chemical atom or molecule. By contrast, many infrared absorption bands involve stretching or bending chemical bonds. For either mechanism, both the energy difference and the coupling to the incident electromagnetic field matter. One concrete example is the absorption discussed for butadiene: an electron moves between molecular orbitals, and the position of the absorption reveals their energy separation. Ultraviolet absorption can therefore probe molecular orbitals, while infrared spectroscopy probes many molecular motions. [ref]
https://openstax.org/books/organic-chemistry/pages/14-7-ultraviolet-spectroscopy. John McMurry, Organic Chemistry, §14.7: ultraviolet excitation and the 217 nm butadiene example
.Subsequent chemical reactions depend on the absorbing chemical substance and its environment; the label ultraviolet alone does not predict a reaction rate. At sufficiently short wavelength, a photon can cause photoionization if its energy exceeds the relevant ionization energy. There is no single wavelength that separates all ionizing from all nonionizing behavior for every chemical substance. Likewise, eventual heating after photon absorption is possible in both ultraviolet and infrared. The distinction is useful because different optical spectra expose different processes, not because the two ranges obey different laws of electromagnetism.
Ritter's 1801 observation used a chemical readout rather than a thermometer. In Caltech/IPAC's account, sunlight passed through a glass optical prism and silver chloride was placed in different parts of the optical spectrum. Darkening was weak toward red, stronger toward violet, and pronounced beyond the visible violet edge. The measured evidence was a change in the chemical substance's appearance at a spatial location with no visible color, establishing radiation beyond the eye's ordinary range. It was not a calibrated measurement of a universal ultraviolet optical spectrum. [ref]
https://coolcosmos.ipac.caltech.edu/page/lesson_ritter_experiment. Caltech/IPAC Cool Cosmos, The Ritter Experiment (2022): the historical silver-chloride observation
.A controlled modern interpretation of such a chemical test would compare equal exposure durations and matched fresh samples, keep an unexposed sample in darkness, monitor temperature, and distinguish scattered visible light from the intended short-wavelength beam with characterized filtering. These are proposed controls, not an assertion that Ritter performed them. Unequal sample preparation or heating can change a reaction rate. The optical prism, terrestrial atmosphere and sample response restrict which wavelengths the test detects. Darkening is a detector-weighted response, so its spatial maximum is not automatically the maximum of incoming radiant flux or of photon energy.
Thomas Larason and Jeanne Houston's NIST report documents a quantitative ultraviolet detector comparison. An argon source feeds a double-diffraction grating spectrometer; a shutter and mirrors deliver the selected band to a working-standard or test photodiode, successively at the same position. A beam splitter supplies a monitor photodiode. Amplifiers and voltmeters record detector and monitor simultaneously; shutter-closed readings provide dark baselines. The – scan, typically with bandpass, measures spectral responsivity. Monitor normalization suppresses source drift; known spectral lines calibrate wavelength. The report assesses temperature effects and unwanted light outside the band, weighted by detector response. The latter need not cancel between different spectral responsivities. [ref].
This determines electrical response without visual perception. Bandpass and spatial nonuniformity limit the calibration; aging and changed temperature can affect later use. The scan includes visible light and ultraviolet; no response below follows from it.
For a narrow beam, the idealized substitution calculation isHere is spectral responsivity; and are dark-subtracted detector and monitor electric currents. This follows by writing for each detector and using the monitor to track changes in radiant flux. It assumes linear response, unchanged beam splitting and collection geometry, and a sufficiently narrow band. For an illustrative standard with , ratios and give . These invented arithmetic inputs illustrate the method; they are not NIST measurements.
An independent photon-counting model connects spectral responsivity to quantum efficiency. If is the number of collected electrons per incident photon, there is no internal multiplication, and is the elementary charge, thenAt illustrative constant and , this gives about at and at . The ultraviolet readout is smaller in this model because there are fewer incident photons, not because their individual energies are smaller. Real quantum efficiency depends on wavelength, windows, absorption and carrier collection; a detector's band gap and construction determine its usable range. Constant across these two wavelengths is an analytical comparison, not a claimed specification of a real photodiode.
Photon energy across conventional ultraviolet and infrared ranges, with a schematic detector-substitution experiment
. Details. The curve is the calculated relation , and the shaded ranges use the stated CIE conventions. The lower diagram abstracts the detector comparison rather than reproducing an instrument drawing. Together with the infrared heat-balance illustration, it shows why a calibrated detector response, rather than what looks bright to an observer, is the bridge between invisible radiation and a quantitative measurement.
Ultraviolet radiation Created 2026-10-24 Updated 2026-11-05
Ultraviolet radiation is electromagnetic radiation at shorter wavelengths than visible violet light and longer wavelengths than the neighboring X-ray band. Its photons have higher energies than visible photons because .
Its interaction with matter depends strongly on wavelength. A material that transmits visible light can absorb ultraviolet radiation, converting excitation into fluorescence, chemical change or heat. To measure transmission, compare the sample with a reference path at the same wavelength and account for the detector's spectral responsivity. Visible transparency is therefore an unreliable test of an ultraviolet window.
Umbra 2026-11-05
An umbra is the region from which an opaque intervening object blocks the whole visible disk of an extended source of light. In the lunar umbra, an observer on Earth can see a total solar eclipse; the surrounding penumbra gives only partial coverage.[ref]
For a spherical source of radius larger than an opaque body's radius , separated by centre distance , the common tangent rays meet on the axis behind the body atThis finite cone explains why a smaller occulting body need not produce totality at every distance. Beyond its tip the source can surround the occulting disk, producing an annular alignment. The umbra excludes direct source rays; it need not be perfectly black when scattered or refracted light enters the region.
Vacuum photodiode Created 2026-10-18 Updated 2026-10-20
Velocity-addition formula 2026-10-14
The velocity-addition formula translates a particle's velocity between two specified inertial frames. Let move at signed velocity along the -axis of , with parallel axes and , where is the speed of light. Define and for the same particle's world line, using position and time measured within the corresponding inertial frame. With Lorentz factor , the forward Lorentz boost gives
For collinear motion, write and . The inverse velocity-addition formula isThis is the composition of the particle's velocity in and that frame's velocity relative to . The velocities must belong to this same chain of reference frames, with directions specified. Two arbitrary quoted speeds cannot be inserted blindly. Each velocity measurement uses distances and clocks in a single inertial frame, with Einstein synchronisation for separated clocks.
For example, let and let the particle travel at in . Its velocity in isThe Galilean transformation would instead give , which fails here. For light moving along the positive axis, gives ; similarly gives . Negative directions also work for massive particles: at , gives , while gives . Thus “addition” means composition of signed velocities, rather than addition of their magnitudes.
A short derivation differentiates the Lorentz transformation: and . Dividing these differentials gives the longitudinal velocity-addition formula. The transverse formulas use and , but the same transformed time denominator; omitting it would ignore the relativity of simultaneity. Replacing by gives the inverse. When both relative and particle velocities are small compared with the speed of light, the denominator is close to one and the nonrelativistic limit recovers the Galilean transformation.
The formula lets us compare particle motion in a moving apparatus and a laboratory without losing the invariant speed of light. Einstein's 1905 paper derives the coordinate change in §3 and the composition of velocities in §5, including the collinear formula, its light-speed case, and composition of parallel transformations. [ref]
https://www.fourmilab.ch/etexts/einstein/specrel/www/. Albert Einstein, On the Electrodynamics of Moving Bodies (1905), §§3 and 5; English translation by W. Perrett and G. B. Jeffery, electronic edition by John Walker
. The rapidity parametrization makes the collinear composition particularly simple.





